PowerBook Running HOT w/ Cinema 23"

My PowerBook G4 12" 1.33 fan kicks high almost immediately, and continues running high, once I plug in my 23" Cinema Display.
Temperature Monitor is reporting the following w/ values (values w/ no display in parens):
94.1 (91.4) F Battery
127.4 (114.8) F Processor Topside *
139.1 (127.8) F Graphics Processor Die *
118.8 (111.7) F Hard Disk Drive Bottomside
104.0 (104.0) F SMART Disk Hitachi
The Processors seem to be the primary source of the heat increase. I know there's more processing to drive the display. But is this much temperature increase to be expected?
I am keeping the laptop elevated, hoping that helps a little at least, but it's not having any impact. Fan is revved high the whole time, and annoying, but I'm concerned about a meltdown of sorts.
Can I increase VRAM or anything else to help mitigate the issue? I have 1GB as it is...is the processor just not up to the task?
Anyone else seeing this on PowerBooks?

Sounds good as I was a little worried. My Titanium G4 ran a bit hot but nothing like this. I keep the lid closed while in desktop mode and I happened to open it and noticed that where the armrest was it was quite warm and the very back was very warm. It concerned me.
However when I run this unit in portable mode you need to put a book or something under it as it is so hot.
I was just concerned this kind of heat might stress the battery and who knows even the laptops screen. But I guess Apple engineering would have considered this heat factor when designing the unit.
Thanks

Similar Messages

PowerBook Running HOT After Leopard Install

Ever since I installed Leopard, my powerbook runs so hot that swear it's going to melt! Even with just one program open for a short time (like Apple Mail) the fan will be running and the unit seems like it is being overworked or something. Is anyone else experiencing this? Is Leopard so advanced that a powerbook just a few years old has a hard time running it? Any suggestions?

Thanks for your willingness to help me out.
I think the layout of Activity Monitor may be a little different in Leopard...what I am looking at under the CPU button says that the user has 100% usage on the CPU and the bar chart is totally filled in green. What the CPU column says under "all processes" is that some program called lexmarkcupsdrive (I have no idea what it is) is hogging most of my juice–if the 93.1 is the % usage. I pasted all the info on that below:
"85 LexmarkCUPSDrive _lp 93.1 3 4.05 MB 736.61 MB PowerPC"
This is seems weird because the user is"_lp". I have no idea what that is either. For the most part, all the other process users look legit like "root" and the name of my home folder .
Do you make anything of this?
My powerbook never used to heat up or even seem like it was working unless I was watching a dvd or using iTunes with tons of other programs open–the issue really irritates me.
If I see processes in my activity monitor that I don't recognize, or that look suspicious should I take action?
Thanks for your help Bob,
MacUte

PowerBook runs HOT with iPhone connected

Has anyone else observed their computer running hot (fans rev up real fast!) while their iPhone is connected? I'm still waiting for "the new at&t" to get my activation unclogged, so maybe it's just because my iPhone is still in a pre-activated mode, but whenever I connect it to my 12" PowerBook G4, the computer starts heating up and revving its fans like it is working REALLY HARD. A check of the Activity Monitor shows that the CPU is below 10% and there are no unusual messages flooding the console.log or system.log ...
Anyone else seeing this?

Yes, my PowerBook revs up even when both it and the iPhone are idle (screenlocked even-- the iPhone not the PowerBook!)
But you have a point.. maybe the problem has something to do with the PowerBook's power management chip. I'll try following Apple's PMU reset procedure tonight when I get home. While I'm at it, I'll try an Open Firmware reset too.
I'll post my findings..
Thanks everyone for your help on this!
My fiancee's iPhone connects to her 1.25 GHz 12" PB
without the rev-up problem most of the time. But it
does rev up when it's doing anything remotely
computationally intensive, like resizing photos. If
yours is doing that just from being connected, that
is strange. What is the internal temperature of the
PB? (There are some programs and dashboard widgets
that will tell you, I think - not sure what
thermometers the 12" PB has.) Maybe you have a vent
blocked or something.
This might be becoming a question for the 12" PB
messageboard - maybe it's a general problem with
high-drain USB devices on some models?
Have you tried hooking up the iPhone through a
powered USB hub? That would perhaps isolate if it's
a current-drain issue. Maybe this is a symptom of
other power-supply problems with the PB.

Powerbook G4 runs hot after OS X upgrade

I have a powerbookG4 that had 10.3.7. I upgraded today to 10.3.9 and upgraded iTunes from 4 to 6. (looking at the iPod video requirements) Now I'm noticing that it seems to run much hotter. I was on the internet, using AirPort (as usual) but the fan seemed to be running much faster and the bottom of the computer was almost too hot to touch. Plus, I also noticed in this form, that the computer automatically filled in the OS X form with 10.3.7, tho' I have verified in the 'about this apple' page that it now has 10.3.9.
Any suggetions? I wouldn't think running hot would be good for it, and if I want to use it on battery power, would use more power for the higher speed fan. (I did notice tho' that when I turned off AirPort for a few minutes and turned it back on that it's slowed the fan down some, and seems to be cooler, even after turning AirPort back on. Interesting.)
PowerBook G4 1.33GHz Mac OS X (10.3.9)

Welcome to Apple Discussions!
It sounds like you do may not be using the right discs. If you want to install Leopard, you will need the retail DVD--black with the purple aurora. If you want to install the original OS (Panther?), you need the exact install discs for the PowerBook. If you don't have these, you can call Apple with the serial number and get a replacement set for a fee.
Any other gray machine specific discs will simply not work. These are optimized for the computer they were shipped with.
The ?/Mac face just reflects the fact that the drive you erased is empty and there is no OS on it.
The idea of erasing and reinstalling the system software is basically a good idea. It just sounds like you are trying to use the wrong discs and will need to try to acquire the right ones.
Good luck!

MBP running hot when connected to Cinema Display

I have a 2.33 MBP that I use for work and at home. I also have a 23 inch Cinema display on my desk at home. I have noticed that when I have my MBP connect to the Cinema and the screen on the MBP closed it runs hot and the fans never seem to stop running. I was wondering if anyone has seen the same thing and if so what they have done to resolve the issues. I have had looked at the laptop coolers that go under the laptop and that powers the fans off an USB port, but I really like my desk clean and don't want to add something else to it. Any ideas or suggestions would be great.
Thanks
Matt

Try running with the lid open and see it temps drop.

My PowerBook G4 runs hot after installing iTunes 7.1

Only Safari and iTunes open. The iStat Pro shows the CPU bottom and top around 55 degree Celcius (but the temp haven't changed since then...crash between 7.1 and iStat? but I can feel my PB runs hot)
Anybody got the same problem?

Ditto here.
Mac OS 10.4.9. iTunes 7.1.1 (5)
Airport Extreme Base Station "chained" to 2 Aiport Express Remotes. All connections are fine. Have internet on remote Macs. Airport Admin utility displays all three airport units, but I'm now unable to broadcast to the remote Express hooked up to my stereo in adjacent room. Have done this many times in the past without problem, but not in past couple months, so can't say if it broke with 7.1 or 7.1.1, but I get this message from iTunes:
The remote speaker "Living Room Speakers" is not compatible with this version of iTunes.
Prior to restarting iTunes (and being sure all Aiport station firmware was up-to-date, I was getting the message that no speakers were connected (double-checked all speaker and stereo connections), but now just the "not compatible" message.
G5 2.7 Dual Processor Mac OS X (10.4.9) 2 GB RAM
G5 2.7 Dual Processor Mac OS X (10.4.3) 2 GB RAM

Adapter running hot, amber, battery icon "calculating"

I've had my PB G4 for a few years, same battery.
I noticed today that whether on or asleep, the light on the adapter is amber, and my adapter is running hot. I have it plugged into an independent power source so other appliances can't affect it. I also use the cord with the grounded plug, not the "duckhead" adapter.
The computer itself was getting really hot as I was using it too. The icon for the battery indicates 'calculating' but the battery is fully charged. I rarely use it off the adapter.
I've tried repairing permissing, unplugging the adaptor, using just the duckhead, etc.
Any ideas or Apple articles you guys can point me to? I'm worried my computer is going to melt.

Try running your PowerBook off battery for a while and reconnect power. If the problem persists you may want to reset your PMU…
http://docs.info.apple.com/article.html?artnum=14449

New MBP seems to run hot & fan runs almost all the time

I've had my MBP for just about a week now. It's the new, 15", 2.2 GHz model. It's great, but I notice that it runs hotter than my Powerbook G4 did and the fan is almost always on. It's presently sitting on a wooden topped table. My house is not AC-ed, but the air temp is about 70 F/21 C today. Seems to run hot in my AC-ed faculty office too, when I am there. What is "normal" for this machine. TIA.

David,
Ditto what Ned says. To be sure, 80 C is not too hot (it is the temp that the MBP is designed to maintain as a working maximum), but that you are experiencing this temp at all times indicates that something is pushing the processor at all times.
That is not normal. As has been suggested, have a look at Activity Monitor. If you are not doing anything of any consequence at the time, your CPU usage should be very, very low, and processes that you see using CPU intermittently (there will be many of these processes) should only use a small percentage when they use any at all.
Scott

MacbookPro 17" runs hot after 10.10.3

This laptop now runs hot and makes fan noise since upgrading to 10.10.3. This only happens when I have an Apple Cinema Display connected and the laptop is closed. When the monitor is connected and the laptop is open - everything is normal. This only started when I went to 10.10.3
Thanks

How hot is hot. Actual numbers help.
Open Activity Monitor to ALL PROCESSES and see what applications are taking a lot of the CPU/GPU resources.
Since you have installed a new OSX, Spotlight may be reindexing the HDD. When that finishes, the problem may go away.
Ciao.

HP Pavilion Elite E9120F running hot, what fan do I need to buy. It is running at over 90 degrees

My desktop HP Pavilion E9120F began to run hot, fan was coming on very slow, I cleaned really good, was a bit dusty.. I think this may have caused the problem. It is not running at 90 degrees farenheit. I replaced the video card so I could run video programs thinking that would fix it, didn't. I am wondering do I need to buy a new fan to keep the temp down or is my CPU damaged and can't be fixed? I can still run my programs but CPU gets to 100% and it never gets under 78 degrees. Help I don't know if I should just buy new fans or what?

If this is your CPU, it's range is 55°C - 71°C. Here is how to measure a fan
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Mid 2013 macbook air: battery drain / running hot

Hi there,
For the last couple weeks my MBA starts to run hot and drain battery fast if I've been using it for a few hours.
I use it a lot on most days and connect to powercord only once it drops down low, like below 20%.
Have just seen other posts who recommend doing that at 50% battery and will now do the same.
However my question is: have i ruined my battery in the meantime?
AND/OR is there something else i can do to get battery running like it used to, and stop the loud fan switching on all the time because it's all running too hot?
I've copied in an etrecheck in case that helps diagnose more....
thanks heaps for any help!
Hardware Information:
          MacBook Air (13-inch, Mid 2013)
          MacBook Air - model: MacBookAir6,2
          1 1.7 GHz Intel Core i7 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 5000 - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 5 days 21:16:2
Disk Information:
          APPLE SSD SM0512F disk0 : (500.28 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    disk0s2 (disk0s2) <not mounted>: 499.42 GB
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Internal Memory Card Reader
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System] net.cloudpath.HelperTool.plist 3rd-Party support link
Launch Agents:
          [System] com.divx.dms.agent.plist 3rd-Party support link
          [System] com.divx.update.agent.plist 3rd-Party support link
          [System] com.sierrawireless.SwitchTool.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          iTunesHelper
          Calendar
          Dropbox
          Google Drive
          Mail
          Twitter
          Disk Doctor
          UCM Launch Agent
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          DivX Web Player: Version: 3.1.0.13 - SDK 10.5 3rd-Party support link
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          OVSHelper: Version: 1.1 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
Safari Extensions:
          Searchme: Version: 1.2
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          /Library/Application Support/DivX
                    DivXUpdate:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    DivXMediaServer:          Version: 10.1 - SDK 10.5 3rd-Party support link
                    DivXTransferWizard:          Version: 10.1.0 (Build 10.1.0.102) - SDK 10.5 3rd-Party support link
                    DMSLaunch:          Version: 1.0 - SDK 10.5 3rd-Party support link
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          /Applications/Microsoft Office 2011/Office
                    Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Setup Assistant:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                    Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          /Applications/Microsoft Office 2011
                    Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          iSkysoft Helper Compact:          Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
                    /Users/[redacted]/Library/Application Support/Helper/iSkysoft Helper Compact.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          /Applications/iWork '09
          Mobile Broadband Manager:          Version: 3.15 - SDK 10.5 3rd-Party support link
          DivX Converter:          Version: 10.1.0 (Build 10.1.0.166) - SDK 10.5 3rd-Party support link
          DivX Player:          Version: 10.1.0 (Build 11.3.0.40) - SDK 10.5 3rd-Party support link
Time Machine:
          Auto backup: YES
          Volumes being backed up:
          Destinations:
                    Data [Network] (Last used)
                    Total size: 2
                    Total number of backups: 57
                    Oldest backup: 2013-07-26 15:57:23 +0000
                    Last backup: 2014-03-18 12:31:47 +0000
                    Size of backup disk: Excellent
                              Backup size 2 > (Disk size 0 B X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
             100%          Locum
               2%          WindowServer
               1%          EtreCheck
               1%          Google Drive
               0%          Microsoft Word
Top Processes by Memory:
          213 MB          Safari
          188 MB          Finder
          156 MB          com.apple.WebKit.WebContent
          131 MB          Mail
          115 MB          Microsoft Word
Virtual Memory Information:
          2.33 GB          Free RAM
          3.60 GB          Active RAM
          626 MB          Inactive RAM
          1005 MB          Wired RAM
          7.65 GB          Page-ins
          64 MB          Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/\/Users\/Shared\//b'$'\ns/\/Users\/[^/]+\//\/Users\/USER\//g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//g;s/\).*/)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{print "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes!

Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes! I've closed all apps and reset the complete phone but no luck. Any one know what else I can try apart from a new phone?

I have done a factory reset at 45% battery. After the reset it's still hot and at 35% now

High CPU usage - Rapid Battery Drain - Running HOT

Looking for help.. PLEASE!
Z10 - Model STL100-3 Software release 10.2.1.2179
Symptoms;
Occasionally, and for no apparent reason, I notice my Z10 getting hot in my pocket. I run the device monitor App and see a very high CPU usage, which consequently drains the batter very quickly.
I've tried all the solutions from every support group thread and blog. And I mean ALL!
Pulling the battery
Replaced the battery
Removed the SIM
Deleted G Mail
Removed all 3rd party Apps (2)
Stopped email sync
Stopped calendar sync
Turned off all radio
Turned Off Wi-Fi
Let it sit for hours, even days to let it finish doing whatever its trying to do
Etc Etc Etc.
Finally, I called BB support, they wanted $50 to talk to someone. I told them the issue, they said the device is bad and must be replaced. I said its software related!! They said.. no, its a hardware issue. Device is under warranty and they want me to just go get a new one. I don't want a new one, I want a fix! Stop the waste of BB $
Temporary solution
Eventually, I decided I would do a restore, back to the factory settings, and here's when I found something
I run BB Link, connect the device, do a back-up... and LOW AND BEHOLD.. this fixes the high CPU usage and the device runs great, very cool, low cpu and extremely long battery life.
Sadly! .. this problem reoccurs, after a few days, sometimes after a couple of weeks and just out of the blue.
I can force this fault to occur, simply by doing a restart of the device. Sure enough, it will run hot, use all the cpu and I will have to do a back-up to get it to settle down again. I've tried to wait for the so called 'indexing' to finish, but it never stops running with high cpu and doesn't help.
Can any one tell me whats happening and how to make this a permanent fix?
There are hundreds if not thousands of people having very similar issues, and many different methods to fix it. Its my belief that there is an underlying bigger problem that relates to all these differing fixes, but as yet.. I cant find it and none of these fixes work for me. For now... I will keep doing the occasional back-up and hope I get a response that can help.
Thanks to all that read this.

curve8530curve8330 wrote:
The heat may be normal. After a little water damage incident, which I repaired, I disassembled my Z10 the find a small heat sink will thermal compound. This helps dissipate heat efficiently. I found a large number of air bubbles and possibly a large air pocket by the way the paste stuck to both sides. I removed the old paste and replaced it with artic silver paste and the z10 has been much much cooler. It use to run about 105*f and now it is around 85*f.
See this thread I posted for before and after pictures using a thermal imager.
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-heating-up-fix/m-p/3031220#M71390
@Curve8530 .....as much a s your discovery is appreciated, I hardly believe that most people will actually dismantle their phone to remove the paste and replace with arctic silver. Besides, what you are doing is not a fix for the actual problem....
In most cases, this heat is associated with apps using the CPU resources beyond the normal limits.
As an easy fix, finding and removing the app(s) in question followed by a reboot, solves the issue. In some cases an OS reload is necessary.... but under no circumstances I would even remotely suggest to any member to dismantle their phone and do what you did...

Windows Vista 64bit on boot camp running hot?

I have just installed win vista and seems to be running quite hot?
I hardly use Microsoft OS anyway its just for apps but that seems to be running hot and not comfortable with it.
any idea?

Mainly this is because Windows cannot control the fans which causes the computer to heat up. It's a well known problem.
Some solutions include the use of fan control software for the Mac such as SMCFanControl to set the fan's idle speed to a higher level before booting into Windows. Another solution is Input Remapper.

What are the video card requirements for running a 23" cinema display

What are the video card requirements for running a 22" cinema display(clear acrylic case) w/ a PC? My motherbaord is AGP. Thanks to anyone who can help.
Intel P4 3.0ghz Windows XP

Hi Lionel,
As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
A good place to start looking for answers is:
http://cubeowner.com/kbase_2/
Cheers!
Karl

PowerBook Running HOT w/ Cinema 23"

Similar Messages

Maybe you are looking for