PowerBook shuts down before sleeping

I've tried to find similar post on the forum but none of the answers I found worked for my particular case... hence this post !!
I've just bought a brand new battery for my Power Book. This battery is not Apple branded.
The battery seems to work fine as I can use my PB for 3-4 hours without any particular issue.
I've got the low battery warning message but when the battery is nearly empty, my PB doesn't go to sleep and shut down directly.
I've already done twice the calibrating of my new battery, reset the PMU several times,rerun the latest battery updater, checked the power savings settings ...
None of the above seems to have a positive effect as the PB is still shuting down instead of going to sleep when battery is very low.
Does anyone have an idea of what I could do else ?
Is it possible that the issue comes from the battery itself and not the settings of the PB ?
Thanks for any answer that could help me.
If anyone

Hi, brastoin. Was this one of the $40-60 counterfeit Apple-branded batteries one finds advertised in lots of places online? If so, I suspect the maker just left out some control circuitry to save money, hoping the buyer wouldn't notice or wouldn't mind. You don't always get what you pay for in a Powerbook battery, but if you pay little enough, you always get junk.

Similar Messages

Powerbook 17" G4 automatically shuts down in sleep mode

Powerbook 17" G4 automatically shuts down in sleep mode intermittently. When press power button to bring it back up, it takes a very long time to reboot and the date is set to Dec 31, 1969. It comes back up finally, but this is irritating.
Thanks for any help,

Hi Reaskt
Have you tried using Temperture Monitor to monitor your temps? Maybe it is overheating. Also it sounds like your backup battery is dead, that's why the clock reset's it's self. If you still have applecare I would give apple a call a soon I could. To me it looks like you would need a new logic board. I realy hope that you have applecare. Also have you tried an Erase and Install? Have you tried running Disk Utility booted from your install CD?
Post back when you get more info
Nic

MacPro shut down instaed Sleep after Mountain Lion Update

Sleep Mode works not longer after updateted to Mouintain Lion. It shut down and needs quite longer on a next Computer start - longer as if started normal after normal shut down before.

There have been many Sleep issues reported, search them out here. One thing you should try, is re-installing OS X.
Boot up holding command-r keys into your Recovery Volume.
The screen should give you these choices...
Restore from TM backup
Reinstall Mac OS X
Get help online
Disk Utility
First run Disk Utility Repair Disk, if you get errors run until no errors reported or reports "the disk cannot be fixed". Then, choose Reinstall OS X. This will be an install "in place" and shouldn't effect any of your own data or settings.

MBP shuts down after sleep when 2% battery left

Sorry guys if u find it irritating to see the similar question again n again but i couldnt stop myself from asking this...
          i have my mbp just 3 weeks old and i tried to callibrate the battery just few hrs ago...i continuously used my mbp until the battery level reached to 2% (the warning message showed when it was 6%)...just then i had to received a phone call. When i was busy talking, i noticed that the mbp has gone to sleep mode...but when i returned (2-3 mins later), i found it shut down...
          well, i think it should have remained to sleep mode but it didnt...then after an hour i connected the power cord and switched on and noticed a progress bar which i saw for the first time....i have been charging it for 40-50 mins, now...
          also the health of my battery keeps fluctuating between 95-100 %...istat shows this...is this normal???
          So what i want to know is, Is this normal for mbp to shut down when the battery reach that low?? OR there is some problem in my MBP???
if there is should i be going to my mbp reseller shop for service or it is something i can handle myself????
thanks in advance..

then how am i supposed to callibrate if it shuts down before completely draining the battery???
and what about the battery health % being fluctuating? my battery have completed only 9 cycles and the health shown at the moment is 97%

MacPro shuts down in sleep mode

MACPRO 3.1 2x 2.8 Quad core Intel Xeon 8GB Ram ATI Radeon HD 5770 Mac Cinema HD 23 inch OSX 10.6.8.
If I allow or select sleep mode through either keyboard shortcuts or apple menu it immediately shuts down I can keep it running but half asleep (screen at rest ) if I have an app using the internet for example Safari using radio stations ; if however there is no app using the internet then the computer will shut down when sleep mode kicks in.
This seems to be a resent phenomena I have changed the graphics card from a Nvidia since the Nvidia was dying ( occasional freezes and wavy faint blue horizontal lines) although the sleep problem surfaced before swapping cards; I am not sure whether this is a hardware issue or a combined software hardware issue.
Anyone else having similar sleep problems ?
The computer is working fine apart from this one issue.
We are in the midst of summer here so the room temperature is an average of 30˚C at the moment can this have anything to do with the sleep issues?

Power or other problems related to unexpected system sleep, shutdown, lights or fans justify an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

Windows 10 will not shut down or sleep

Ever since installing Windows 10 my desktop PC will not go into sleep mode and will not even shut down - I have to press and hold the main power switch.I've searched for solutions, but the only ones I've seen so far relate to laptop power management options, which don't apply to desktops.I was running Windows 7 before I upgraded, and never had a problem putting the PC into sleep or shutting down before.I have run the power troubleshooter, but that hasn't helped.Can someone suggest a solution?

YES!!!!! A Solution that worked. Spread the news. It has to do with the Intel Virtualization Tehnology. Didn't know what that was until this issue came up in Windows 10. First, find out if this is your issue. 1. I installed the 'Intel Processor Identification Utility' directly from Intel.2. After installation, open the program and go to the 'CPU Technologies' tab.3. If it says 'YES' for Intel Virtualization Tehnology, proceed. Solution...(at least on my system) 1. The next thing you have to do is go into the BIOS. If you have not done this before, proceed at your own risk. You need to restart the computer and enter the BIOS (for me I hit F10 at the HP screen)2. Within the BIOS, there is an 'Advanced Options' section3. In this section there is a line for 'Intel Virtualization Tehnology' and it will say enabled or disabled. My computer said disabled.4. If this is the case, change the option to 'ENABLED'; then SAVE and EXIT from the BIOS. The Computer will restart and from that point on Shut Down, Sleep, etc. has worked. WOW this was a frustrating issue. Almost went back to Windos 8. I take no credit for this solution, I pieced it together from other posts on this issue. Hope this helps.

Mac shuts down in sleep mode.

This just started to happen to my mac pro quad intel running the latest SNOW software. My mac shuts down in sleep mode. I tried to zap pram, but it ill not allow me to do this.
I also check the internal battery using a small program and its a full charge. Does anyone know how to fix this problem?
Thanks,
Tony

godlovestodance,
your Mid 2012 needs 1600 MHz memory modules. Is your currently installed RAM of this variety?
In your current setup, is it your 1 TB HDD or your 256 GB SSD that is in the optical drive bay?
One thing you can try is this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still crash because of an extended sleep?

My computer is shutting down before fully booting up. I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files. Can anyone suggest what I should do next?

My computer is shutting down before fully booting up. I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files. Can anyone suggest what I should do next?

So, you can't Install OSX to the external?
Or you can't boot from it when you do?
You're not the only one wondering... I'm reminded of the Goose that laid the Golden Egg story.

HT201150 How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?

How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
With the position of the power button on the Retina MacBooks, any mistake turns off the screen in the middle of a presentation or any activity using a projector or big screen — a huge waste of time to wake up the display, enter password, have the projector sync back, watch audience disconnecting from what was being discussed, etc.
This is very annoying, and seems to add to the increasing collection of options Apple decided to make by itself instead of allowing the user to choose.
Come on Apple guys, I'm using my Mac because I want options and lots of preferences to tweak to my needs.
If I needed the lobotomized version I'd be using my iPad!
Any way (official or hack) to change this button back to its proper funcionality?
Thanks!

cterra wrote:
How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
Not what you want, but you can get the shut down / restart / sleep dialog by holding the power button

Mid-2011 i7. iMac and USB shuts down on sleep

Just got a refurb i7 21" and am loving it. But I was having trouble with it shutting down when going to sleep and therefore not waking from sleep without a full boot up.
After finding this closed thread (https://discussions.apple.com/thread/2258706?start=0&tstart=0), I wanted to confirm that unfortunately even after the Lion 10.7.2 update, some powered USB hubs (for example Newer Tech 7 port powered about 1 year old) still cause the iMac to shut down on sleep.
A new Belkin 7 port powered ("high speed for 2.0 or 1.1 devices") does the trick and now the iMac will wake from sleep properly and not shut down.
Just wanted to pass this on to others who might be having trouble and wondering if their motherboard is fried or something.
Also, if a USB port stops working, do an SMC reset (unplug, hold power button down).

Just got a refurb i7 21" and am loving it. But I was having trouble with it shutting down when going to sleep and therefore not waking from sleep without a full boot up.
After finding this closed thread (https://discussions.apple.com/thread/2258706?start=0&tstart=0), I wanted to confirm that unfortunately even after the Lion 10.7.2 update, some powered USB hubs (for example Newer Tech 7 port powered about 1 year old) still cause the iMac to shut down on sleep.
A new Belkin 7 port powered ("high speed for 2.0 or 1.1 devices") does the trick and now the iMac will wake from sleep properly and not shut down.
Just wanted to pass this on to others who might be having trouble and wondering if their motherboard is fried or something.
Also, if a USB port stops working, do an SMC reset (unplug, hold power button down).

MacBook shuts down when sleep, asks to shut down, screensaver changes

Hello. My MacBook is having all sorts of problems and they just started occuring recently.
1. It shuts down when it's 'sleeping'. When I open it, I have to press the button to turn it back on. Sometimes it wouldn't reboot and the log in page would pop up, but rarely.
2. While I'm using my macbook, a window would ask me if I want to 'shut down, restart, sleep, cancel'. Or something like that. It would do this every few minutes.
3. I noticed that my screensaver would go back to Flurry/default.
Could this be a battery issue? I noticed that it says 'replace soon'. I will definitely go to a genius bar, but I'm too busy right now with school I don't know when I can make a trip to the nearest Apple store.

You can get a new battery fairly cheap on eBay if you have the Early 2008 MacBook with the easily removable battery.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0.m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0.m 270.l1313
Or for $129 from Apple http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

Mac Pro shuts down during sleep

My Pro sometimes shuts down during sleep. Nothing will wake the machine and it it not accessible by another other computer on the network. It has to be manually re-started using the button on the back of the computer. There are no error messages on re-start.
I have reset the SMC and PRAM but it makes no difference.
Any ideas?

Perhaps some third-party software that you had previously installed needs to be updated to be compatible with the latest OS X updates.
Perhaps some hardware component is experiencing problems; even the best hardware fails occasionally.

IMac (3.4gHz Intel Core i7) shuts down when sleeps, then won't restart

Just bought a brand new 27" iMac (3.4gHz Intel Core i7) which shuts down when sleeps, then won't restart (ie completely dead).
In order to restart, I have to unplug the power cord from the computer, hold power key down for 10secs, replug in and it then starts up. I returned to the store and they spent a couple days letting it go to sleep etc and overnight and for them it was fine. Woke up no problems. They returned it to me yesterday.
So I set it all up again, left it overnight and this morning it was dead again. So now it leaves me to wonder if it's something I have plugged into it.
I have a new Seagate 3TB external hard drive hooked up using USB3.0. This is plugged directly into the back of the computer.
I also have a powered USB hub plugged into the computer which has regular USB stuff such as printer, graphics tablet and another external hard drive (this one is older LaCie 500gb, and have put it into a new USB 3.0 case as well for the arrival of the new iMac (this had an old firewire hard drive case). However this hard drive is switched off at the case and is not being used.
I believe it could possibly be the Seagate 3TB disk causing this problem, but it works fine during the day while I am using the computer, it's just when I either leave it at lunch time to go to a meeting or walk etc or overnight that I come back and it has shut down....leaving me to believe that it's due to the computer going to sleep.
Has anyone else had a similar problem with a Seagate drive? Today I'm conducting an experiment and heading off for lunch with both hard drives unhooked. If I come back and the computer wakes up from a click of the mouse or keyboard as it should, I will plug in one hard drive at a time and re-test. I will leave the Seagate for last, as I don't think it is the old LaCie disk (which is off).
For reference sake, I also have a NAS running off my network through Airport Extreme etc and have my old iMac hooked up to the network too, but don't believe this is the problem.
Initially I did put in some after market RAM (another 8GB) and though that might be the problem, but I removed and it still reacted the same way (plus store I bought it from again booted up fine and woke up fine at their shop after I had taken RAM out too).
Will keep this post updated with my next test (letting computer sleep without either hard drive in), but keen to hear if anyone has had any similar experiences with Seagate disks/cases and the new iMacs.
Cheers,
Kristin

Hey kristinandmike,
I had a similar problem shortly after I bought my 27" iMac. Here is an excerpt from my discussion:
"As BDAqua suggested, I started the process of elimination by shutting down the externals and just leaving up one of the USB drives and using the computer until time to shut it off. After eliminating 2 of the 3 drives I figured it had to be the last one. That drive is a Seagate GoFlex Desk version that allows different bases with differing connectivity. I had previously used FW800 to connect but had switched to USB3 on the new computer. I went ahead and got a Thunderbolt to FW adaptor cable and switched this drive back to Firewire rather than USB3. So far so good."
For some reason the Seagate I was using didn't agree with the USB3 on the Mac.

Application shuts down before it has started

I have a problem with logic on my macbook. When I start it I get a warning sign that says that the application shut down unexpected ( I don't know exactly what the warning sign says in English since it's on Swedish on my compute ).
The things I've done so far is:
* Repaired the disk and the disk authorities (once again, don't know if that's what it's called in English)
* I used AppDelete to throw away Logic and then I installed it again, and I still get the same message, that it shuts down before it even opened.
Does anyone know what to do? Please help me!

There are special Apple Discussion forums for Logic Studio and Logic Pro 8. Are you referring to one of these?
Has it worked before or is this the first time you have tried using it?
[kmosx: Apps unexpectedly quit|http://discussions.apple.com/thread.jspa?messageID=607542&#607542]
[XLab FAQ:Applications Unexpectedly Quit|http://www.thexlab.com/faqs/multipleappsquit.html]
[Mac OS X 10.3.9, 10.4: Some Apple applications don't open|http://support.apple.com/kb/TA23256]

Logic shut down before it opens

I have a problem with logic on my macbook. When I start it I get a warning sign that says that the application shut down unexpected ( I don't know exactly what the warning sign says in English since it's on Swedish on my compute ).
The things I've done so far is:
- Repaired the disk and the disk authorities (once again, don't know if that's what it's called in English)
- I used AppDelete to throw away Logic and then I installed it again, and I still get the same message, that it shuts down before it even opened.
Does anyone know what to do? Please help me!

If Jim's suggestion doesn't work, and Logic still crashes, copy and paste the crash log into a new message here.
If you don't know how, open "Console" in your utilities folder. Click the 'Logs' icon. You'll see an item under ~/Library/Logs named 'CrashReporter' and you'll find the "Logic Pro crash.log'
Find the beginning of the latest log (they're dated) and copy and paste the complete log for that date into your message. Sometimes (but not always) there's a clue in there about a bad plug-in, or a failed attempt to load a particular resource, which might help us suggest a solution.

PowerBook shuts down before sleeping

Similar Messages

Maybe you are looking for