Powerbook suddently beeps 3 times and wont startup

My older powerbook G4 was working fine, then as I went to start it up it beeped 3 times, then seemed like it went to sleep, the light now flashes 4 times at intervals.
What does it mean, is it fixable?
Thank you
V

The three beeps at startup means no good RAM is being detected.
Remove your RAM module(s) and then firmly reinsert it/them. Does that improve matters?

Similar Messages

  • I just installed new 8gb ram in my MBP 2010 and it beeps 3 times and wont boot.

    I bought 8gb DDR3 1066 mhz to install on my MBP 2010 and it beeps three times during boot and wont boot. I looked at other threads and it seems like no one has found an answer. It looks brand new with no obious problems.

    Macs can be very fussy about RAM... It is Important to get the Correct and Matching RAM
    You can use these Links to check which RAM is suitable for your Mac...
    http://eshop.macsales.com/shop/apple/memory/
    http://www.crucial.com

  • X3-00 blinks 4 times and wont turn on

    Can someone please help me
    I turned off my phone and it turned off phone and then went to turn it back on and the screen blinked 4 times and then nothing.
    I have tried taking the battery out and pluging it in - but nothing

    if you just have recently purchased this within the last 14 days you should be able to get it replace in store,if not as advised above a nokia care center would be the next place to go
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • My new apple tv wont connet date and time and wont connect to the internet

    I am pulling out my hair and soon my husbands hair!
    We just got the apple tv. We are using wireless internet and have a pc.
    It cannot find date and time. It keeps searching, but so far still hasn't found it. and its says it's connected
    to the internet but when we try to do anything it says we are not, connection fails,, or what not~!
    We have tried to reset the router and the apple tv to no sucess!
    Our firewire has an exception to allow itunes.
    We have tried to do it manually as well and nothing has worked!
    Can someone please help!!

    Amigo, also ESTOU NA MESMA situacao. Meu Apple TV chegou hoje e até o momento não consegui iniciar. já fiz restauração pelo Mac usando o iTunes e sem sucesso ainda. Alguma outra sugestão?

  • Indesign CS6 crashes and wont startup again after reboot - iMac

    Hello
    I have a strange issue that has started in the last couple of weeks. If i restart or reboot my iMac my indesign will not open again. It tries to start to open ('loading image' appears and icon bounces in the dock) but always fails and gives an error afterwards each time (i will attach).
    What i have done so far is the usual deleting of preferences, replacing default file and rebooting the machine again but nothing works.
    The only thing that i can do to get it working again is to reinstall indesign from the disk (design & web premium). All other Creative Suite applications don't need reinstalling and work fine.
    Has anyone else had this issue and if so how did they fix it as its bit of a pain having to reinstall indesign after each reboot.

    Im having issues adding the error log, here is the first bit of it though.....
    Process: Adobe InDesign CS6 [262]
    Path: /Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/MacOS/Adobe InDesign CS6
    Identifier: com.adobe.InDesign
    Version: 8.0.0.370 (8000)
    Code Type:       X86 (Native)
    Parent Process:  launchd [123]
    Date/Time: 2014-09-11 09:05:19.273 +0100
    OS Version:      Mac OS X 10.7.5 (11G63b)
    Report Version:  9
    Interval Since Last Report:          188705 sec
    Crashes Since Last Report:           18
    Per-App Interval Since Last Report:  186329 sec
    Per-App Crashes Since Last Report:   14
    Anonymous UUID: A7B9940A-3665-4D31-AF1D-3BFD1BF3E45B
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
      Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000006

  • Screen brightness rapidly fluctuating and wont startup

    hi guys, hope someone has seen this before and can point me in the right direction.
    have set up dual boot on this system (t440s), windows 8 partition isup and running. was in the middle of installing drivers and programs for windows 7 partition, and after one of the restarts this is happening.
    https://www.youtube.com/watch?v=apSB8Ci45DQ
    stays like that indefinitely, wont start up.
    I have tried going into safe mode and uninstalling programs one by one to find out which one caused this, but i'm running out of things to uninstall and it's still like that.

    ended up fixing this with just doing a system restore, may have been the intel HD drivers i downloaded from the lenovo site, downloaded from intel site and all working ok

  • The History tab at the top of the screen. When I click it it shows history but it shows the same thing every time and wont change. Even when i click "all history" and delete it it is still there. How do i delete it?

    Could you be specific where the files to fix this are?

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • Red light flashes 4 times and wont turn on

    help I did OTA update with my bb z10 now all I getting is flashing redlight phone wont turn on PC can't find phone how can I revive it need help ASAP

    Hey famboflava,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Follow the steps below to get the BlackBerry Z10 back to life:
    Open BlackBerry Link.
    Ensure the computer is connected to the Internet.
    Power off the BlackBerry 10 smartphone or BlackBerry PlayBook tablet.
    Connect the device to the computer.
    When the device button is available on the bottom of the BlackBerry Link window, click it.
    Click the Reload button.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • My ipod is stuck in recovery mode and wont restore

    so i plugged my ipod touch in the other day and updated itunes, but then my ipod went in to recovery mode and itunes said i needed to restore it...so i clicked restore, then restore and update, then it took 2 hours to download and nothing happened afterwards. its come up with error 1604 a few times and wont restore. i hav tried so many things-i've put it in DFU, i've even tried on another computer and on my laptop that had no memory of it. this is the 3rd time this has happened to my ipod now and it is so annoying !! the other 2 times i hav taken it to a apple store and they hav fixed it but i dont wanna keep having to do that-and i dont see y they can fix but i cant    please help me it would be much appresiated.

    i got it solved but i didnt do wat u said. im not completely sure y it decided to work but i think it was cos i tried to erase sync history thx anyway

  • My phone thinks it is connected to a dock all the time and will not play any sound or ring what do i need to do?

    my phone thinks that it is connected to a dock all the time and wont play ringtones or any other sound. I know that the speakers work because it will randomly play sound but for a very short amount of time and just recently stopped making sounds all together. the phone is almost brand new and has no damage I just bought it a few months ago. What can I do to fix the problem?

    Clean iPhone charging port with a clean dry toothbrush. See if better. If not, clean again with toothbrush and small amount of Isopropyl Alcohol. See if better. If not, try Restore. If still a problem, and there is Warranty or AppleCare make Genius reservation and take to Apple for resolution.

  • Loosing time and date

    My macbook suddently looses time and date - it switses to year 2000.
    Would a reset of PRAM be a solution? Or.....????

    Welcome to the Discussions!
    That would be normal since what you are really doing is resetting the PMU.
    http://docs.info.apple.com/article.html?artnum=14449
    Joe

  • HT3275 My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. What happened?

    My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?

    abailey46 wrote:
    My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
    Sorry we are unclear as to the external hard drive and its connection to the TC..
    For instance the light that blinks.. is that the TC or external hard disk or what.
    Did you try just rebooting / restart the whole network in correct order.. modem.. router / TC.. external drive.. clients with 2min gap between each.
    Are you actually running Snow Leopard as the profile states?
    How old is the TC?

  • My HP Pavilion DV7 wont boot up it beeps three times and blinks 1 time

    I have been having problems with my HP Pavilion DV7 for the last several months. When I turn it on I get a black screen. It will beep three times and the caps LED will blink one time. When this first started happening I would turn it off and try to turn it on again. Sometimes it would take turning it off and on several times before it would boot up. Now it will not boot up at all. It just does the same thing every time. When I turn the power on I can hear the fan and the beeps and see the light blink but that is all. I have even tried to turn it on in safe mode but still get the same results.

    Hi there @texashunter00 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that your notebook is having trouble booting up properly, and that you are getting a beep/LED code. I am happy to assist you with this.
    Assuming the flashing code is a repeating  single flash that would indicate a cpu problem. The beeps are commonly indicating a problem with the RAM. Please see the following, and if necessary reseat the memory cards, and see if the problem remains.
    Computer does not start and the LEDs blink or the computer beeps
    If after checking through this, you are still having the same beep/led codes, I would recommend you call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • MacBook Pro 8,2 beeps at random times long after startup and routine use

    This issue seems elusive on the forums as everyone seems to get stuck on the POST beep codes heard only at boot up and this is not related to that. The issue is specific to the MBP 8,2 model as we have dozens of models that came before and after and not a single one suffers from this beeping. I've taken both models in for Warranty support and hardware tests presented no hardware errors.
    My feeling is that this issue is realted to power management. Of the two types of beep tones we get - one quieter that stops only by closing the cover and sending the Mac into hibernation and one that is far louder (it has frequently been described like a fire alarm by nearby users) and stops only by pulling the power cable from the laptop. In this latter situation, the Mac shuts off instantly making it clear that the system cannot switch to battery power correctly - further evidence of power management issues.
    I'm hoping that someone has come across this issue and can separate it from error beeps related to badly installed RAM.
    Also of note is that the battery on this model of Mac laptop are not removable.

    First off there is no model after the 8.2 MBP 15". That is the latest model.
    Since this a fairly new MBP you would better off calling Apple tech support. They will certainly know what those beep are and what is causing them.

  • My laptop beeps and wont come on

    My laptop beeps 3 times consecutively and wont turn on. Help?

    You most likely have a problem with the RAM. It may be bad , or not seated properly. You should bring it in to an Apple Genius bar, the diagnosis is free. Re-seat it and they have tools to test for faulty RAM.They will then tell you your options.

Maybe you are looking for

  • ABAP DUMP -OBJECTS OBJREF NOT ASSIGNED in webdynpro application.

    Hi, When i tried to run webdynpro application program no output is display in the browser. when i checked  ST22 have received dump like OBJECTS OBJREF NOT ASSIGNED . Anyone help me to solve this Thanks Venkat

  • Xslt in jdev

    Hi, I read an old thread about this : Integrated XSLT in 10g , but I think it is unhandy to rename an xml file just because the extension doesn't fit. It would be really neat if I could choose an xml file, select xlst transformation from the menu, pi

  • Spacebar as pause button? (AS 2)

    Hey guys, hoping someone can help me here. I'm trying to code the space bar key as a pause/play function in my flv player. I'm using Lee Brimlow's flv player tutorial as a model for my flv player so essentially it's driven via netstream coding. I've

  • Calling Webservices  from XI

    Hello, I want to call a webservice from my XI interface. I have the WSDL and I have imported it into XI ( External Definitions ). I can see the message types (input/output) of the webservice in Messages tab. How can I make use of these message types

  • New Features of P6 R8.2

    Hi, I'd appreciate if someone can explain the new features of Primavera P6 release 8.2. If there's a PDF with these features, please advise. Regards, Karim