Powerbook Surround Sound

I use a powerbook connected via firewire to a Motu 828mkII (which then connects to my surround sound speakers)
In Logic, I have no problem sending signal to different speakers in my surround sound set up.
I am having problems with playing a DTS audio disc via iTunes (which just plays it as a stereo pair and sounds like a hiss) or the internal DVD player (which says this type of movie is not supported).
In the utility Audio/Midi Setup, I have my audio output set:
Mains (Channels 1 and 2)
5.1 (Channels 3-8)
This goes to a receiver set to 6 channel direct.

Hi Andy,
I don't have any personal experience with your problem, however, I think it can be configured as you wish using the Audio Midi panel in utilities via an aggregate audio device. Although this post itself may not help you, it may explain aggregate audio devices a little more: http://discussions.apple.com/thread.jspa?threadID=240468&tstart=0. Finally, you may want to try reposting in OS X Technologies--> Audio. You might be able to find some more help there. Good Luck!
--Justin S.

Similar Messages

  • No Surround Sound for TV shows purchaced on iTunes

    When I hook up my PowerBook to my surround sound system, I can't get TV shows and movies downloaded from iTunes to play in surround sound, only mono from the center speaker. All other downloaded or mounted video media, (i.e. avi, or mp4, or DVD files) work great. I can also get surround of my iTunes music via airport streaming so I don't think it is the computer. Just iTunes files don't work. Does anyone have this problem or have a solution?
    Thanks.

    Try downloading a free video from the iTunes Music Store and see if it works.
    Try downloading the free song of the week from the iTMS and see if that works.
    See if the sample video for the iPod works on your iPod...
    Quicktime: Sample Files
    btabz

  • Wireless to Bose Surround Sound System

    I want to connect my computer (PowerBook G4) with all my ITUNES! to my surround sound system that is a Bose connected to my Sony TV so that I can listen to my music on my Surround Sound. What is the wireless solution? What is the best and most cost effective solution? Do I need an internet connection? I have Comcast for my provider. All goes through the Bose. It's a 123 Bose. The best answer will experience great music!

    Susan;
    I am doing that right now. You will need to get one
    of the Airport Express units. Plug it into an outlet
    close to the Bose system and plug an audio cable
    between the Airport Express and the AUX input on the
    Bose. Itunes will see the Airport Express and you
    will be given the choice in Itunes to play on your
    computer or the Airport. Works like a dream!
    I am going to try it this afternoon. Thanks. I'll let you know.

  • Surround Sound/multi-channel audio out

    My brother has a set of 5.1 "surround sound" logitech computer speakers that we hoped to plug into the mac... but they seem to require 3 jacks... not the single (2 channel) jack out that the powerbook offers.
    Anyone have a workaround?
    keith

    Ok so i order to help anyone who is interested.
    The only ironic solution to this problem i found was to use a plugin called xto7 to convert the xml to the old fcp7 format.
    i then imported this into premiere pro.
    this was then able to export an OMF that when imported into logic 10 that was using the correct 6ch mono setting as separate tracks.
    Insane but it works until Apple fixes the incorrect meta data import in FCPX that sets the xml export to the default import that is always surround.
    this is the only way i was able to send stems with all the edit points and fades for the sound editor.
    If you don't have premiere lying around you maybe able to do it with fcp7 too we just didn't have it in this studio.
    Fingers crossed Apple fixes the fcpx xml export.

  • Surround sound system

    I just got surround sound for my mac and was wondering if there was a way to let a stereo signal play on multiple speakers. For example, most of my music is stereo so itunes only outputs to my left and right speakers. Ideally, I would want to right signal to play on both the front and back right speakers and the left signal to play on both the front and back left speakers.
    Also, for confirmation, I bought the audigy 2 nx and it works fine out of the box. You can moddify the speakers to channel connections using audio midi. It seems like there should be a way to get this program to solve my problem but I cant figure it out. Thanks for any help.
    Powerbook Ti 667MHz   Mac OS X (10.4.7)  

    by a "real stereo i mean a speaker system that is hooked up to a reciever that is capible of decoding dolby digital, and then a real stereo has speakers require power than what you can get straight out of the computer headphone jack. and as for how to set itunes to surround sound, you can't it simply sends out the file which happens to be in stereo (left and right) in order to get surround sound from a stereo signal you need a reciever that imulate surround sound from a stereo signal

  • Introduction to Surround Sound for a noobie?

    Is there any good tutorial on how I might make a modestly better surround mix? I'm not trying to win an Oscar here, or become a sound engineer. So simpler is better, please.
    I've worked out a way to put surround sound into my HD movie, burn it to a DVD AVCHD using Toast, and get it all to play on a blu-ray player, Cool!! Looks great and has 5.1 Dolby Digital surround, all on a cheap DVD disk.
    But now I realize I don't know jack about how to make it sound good. All I've tried so far is putting a stereo song into the surround speakers with the movie stereo in the fronts as usual. Cool, but it isn't exactly "immersive".
    I think I might get a better result using an upmixing tool such as Upmix 1.1.1 from Cycling '74 (or is it KVR Audio?) to simulate 3D sound from my 2D source materials.
    Has anyone tried something like this? Is it worth the bother? Any tips appreciated.

    Hi Gordon,
    Welcome to the Apple.com discussion boards.
    If you have a Powerbook with USB2.0, you could get one of these - http://www.smalldog.com/product/33122 (if they were in stock) - if you don't have USB2.0 and you do have a PC Card slot, you could get a USB2.0 PC Card and plug it into that..

  • Is it even possible to edit surround sound on a Mac Pro?!?!?!

    Hello,
    I've just been reading this thread:
    http://discussions.apple.com/thread.jspa?messageID=2924869?
    Which among many things discusses the fact that Mac Pros, even through an optical cable, are not capable of exporting live 5.1 audio - they can only playback already encoded 5.1 dolby audio from DVD's for example. Apparently the optical out is a purely stereo affair otherwise. I've finally received my Logitech 5450 speakers (took weeks and weeks) and hooked them up. They can indeed playback 5.1 from a DVD, which is splendid. However, one of the things I was most looking forward to was working on surround mixes in Soundtrack Pro. However, firstly STP doesn't want to convert stereo files into surround (like the video online showed), but only means that the surround panner pans between the two front speakers. (I know there's another thread about that, but the proposed solution of adjusting the collapse slider does nothing).
    Secondly, and perhaps more confusingly, if I load an actual 5.1 file from the STP content, it still doesn't play in proper surround - the centre speaker kind of works and I think something's rumbling through the subwoofer, but both of the left speakers and right speakers are 'compressed' into the front one alone - nothing comes out of the rear speakers (they are perfectly connected I assure you!). In other words, f I move the puck in the surround panner so it's solely on the front right, and then over to the rear right, it's exactly the same (coming out the front).
    I'm sure there must be a solution. Why would Apple advertise the ease with which one can now mix surround if the Mac Pro (I'm not exactly talking about a mac mini here) cannot export live 5.1?
    Something which I'm sure is related, but which I can't solve, is that if I go into Audio MIDI setup in Utilities, and try and 'Configure Speakers', only two channels are recognised, and it won't let me select any of the multichannel options (such as 5.1, which is greyed out.)
    Anyone know what I'm going on about? I'm totally lost - not really an audio person in general, but hoping to enrich my short films with some surround magic.
    Any help greatly appreciated!
    Steve
    Mac Pro Mac OS X (10.4.8)
    Mac Pro   Mac OS X (10.4.8)  

    Typically 5.1 is mixed, and monitored on a 5.1 monitoring system, which means you need an audio interface and setup capable of outputting six channels of audio.
    So of course the Mac Pro is capable, but not without additional multi-channel playback and monitoring hardware.
    Encoded surround sound, which you hear on playback from things like a DVD, is entirely different story and the encoding is done at the end of the mixing/mastering process. Sometimes you will encode a mix in a variety of formats, Dolby Pro Logic, DTS etc.

  • Not able to get the sound from my tv to come through my surround sound speakers

    I have a new Samsung 46" tv and a new yamaha receiver also a new Samsung blu-ray player.  I currently have an HDMI cable going from my tv to my receiver and a short HDMI cable going to my Blu-ray player and the old style red and white rca cables from my tv to my receiver.  The surround sound works great when playing  the blu-ray but no luck when watching regular tv.  I have tried to change the tv speakers to external speakers but all is silent when i do that.  I have read on the other post of similiar problems and the solution seemed to be using an optical digital cable.  I have also read on prior post that i should be able to accomplish this with just the HDMI cable.  I do not have a cable box only a cable line coming into the house and straight to the tv.  Do i even need the rca cables? 

    When i purchased the equipment from best buy i told them what all i was trying to accomplish and this is the exact way i was told to make the connections keep in mind i know nothing when it comes to electronics so i wrote the instructions from the salesrep word for word.  Here is what I have. My tv is located on one side of the room and receiver and blu-ray on the other about 25' from each other.  I have regular cable coming to the tv   and I have an HDMI cable coming from HDMI (DVI- IN)  on the tv to HDMI(OUT) on my RX-V367 receiver. the i have a short HDMI cable going from my receiver (HDMI/DVD) to my blu-ray (HDMI out).  My RCA cables came into play when I told the rep. that I wanted my tv sound to come through my surround sound. He said they did not have a digital optical cable with a length of 25' to reach from tv to receiver so I would have to use RCA cables and to connect them from (audio component IN) on my tv to (AV OUT) on my tv.  The input on my receiver when watching tv in on HDMI 1. 

  • Guide : Getting 5.1 surround sound. Audigy 2

    Hi all
    I thought I would write up a really quick but effecti've and simple guide for owners of the Audigy2 ZS and seeing how its Xmas time, I can assume a few lucky boys and girls may have this awesome card under the tree.
    Most of whats covered should work with all creative products.
    (Sorry, but I WILL NOT cover any info regarding encoding media or the like that will conflict with copyright laws)
    This guide is for setting up your Creative Audigy 2 ZS for surround sound 5. reproduction and information in regards to required Filters/Codecs. I have not included any advanced set up options or the like as the ZS with the set ups I have incluced here will cover it out of the box.
    One of the most common issues people may have with 5. not fuctioning correctly while playing a DVD movie ( Mpeg ) or any multi channel media that is 5. encoded, has to do with Codecs/Filters.
    Most media players will not decode all AC3filters/Mpeg, thus require extra filters/codecs/plugins to be installed.
    Ok , the first thing to do is ensure your sound card and speakers are set up correctly.
    Most common speaker sets have 3 plugs that go in the back of your card .
    EG, Logitech X-530. Pink = Front Centre.Black = Rear left and right. Green = Front left and right.
    Ensure they are in the correct place and are tightly fitted.Ensure your sound card is secure and tightly in place.Make sure your speaker cables are tidy and not a big tangled mess.
    Ensure in device audio controls that SPDIF passthrough is NOT ticked as this is for optical output ( the ZS pro with rack fuction )
    Update to the latest drivers an media source ap
    ps.
    A few little things to set up first in Creative Mixer Control Panel to ensure cleaner sound:
    Lower Master and Wav volume in Creative mixer to about 90% as to avoid any over dri've disstortion.Lower Master Bass Volume to about 90% to avoid over powering the bass.Ensure that your speaker settings Windows control panel and Creative speaker settings match your speaker set up..
    Also run the THX Speaker Callibration test in basic mode.
    YOU SHOULD DISSABLE CMSS IN EAX CP IN ORDER TO GET 5. TO FUCTION AS IT SHOULD.
    CMSS is to be use only for a MONO or STEREO source/signal. It is for sending the stereo/mono signal ( left and right) to all speakers. This is not 5., mearly it is the same signal sent to all speakers to give you a more rich and vivid sound reproduction of an other wise flat source.
    Turn off any EAX FX.
    Things you want to do to ensure stable use:
    SHUT DOWN CTHELPER:
    A background task that is a plug-in manager for Creative drivers. A 3rd party manufacturer can use the CTHELPER plug-in interface to produce drivers, add-on features, and fixes that will integrate with a tighter fit with Creative?s sound drivers and utilities. Gi'ven its purpose CTHELPER would normally be classified as a "leave alone" background task. It also allows Creative speaker setup to be synchronized with Windows Control Panel speaker setting. Without it running that check box in Creative speaker setting is not functional (settings are not in sync). Unfortunately there are often problems with CTHELPER, most notably that it can use 00% of CPU time so it's best left disabled unless you REALLY need it .
    Type in run "msconfig" and shut down all Creative Start up entries. Infact its proberly best to shut everything down.
    NOTE: Any essentinal Software for the proper fuction of devices ,Eg: Razer mouse utils should be left on.
    Simple Bios settings to help improve audio and stablity:
    Dissable Pallette Snoop.ANY AND ALL shadows for devices, EG VGA BIOS and system bios should be dissabled. If you have the setting for PCI latency in your bios ( AGP boards only ) set it to 64, if its already at 64 try 32 .
    Shut down ( remove, reconmended ) any 3rd party tweak apps that run in the background.
    EG, Cache Man and any monitoring software.
    Ok, now for Filters/Codecs and Plugins.
    A major required Filter is AC3. (ac3filter__0a_rc5)
    AC3Filter - it is DirectShow filter for AC3 decoding to play AVI with AC3 audio tracks and MPEG2 (DVD). Required for WMP.
    NOTE: If you have DVD software that should play encoded 5. then make sure you have any updates/patches for the player installed and go through the tools/options for the player and ensure its setup correctly to decode AC3filters in the applictions tools menu.
    If you use Cyberlink Power DVD you may need to pay an extra fee to get the required AC3filter/MPEG2 decoders to fuction as all 5. sound settings may be greyed out on some dated versions.
    InterVideo WIN DVD ( this software suit comes with most "Asus" if not all makes of Mainboards. This suit comes complete with the required codecs/filters so get full surrport for 5. - 6. - 7. out of the box. Note: you must set it up first under audio options as it defualts to 2..
    If you use WMP0 you should download and install the AC3filter or get the latest XP codec/filters packs. With out these filters you may not get 5. sound and/or poor reproduction.
    Supported file types:
    The following table lists the file types (formats) supported by Windows Media Player .(For files type played by Power DVD or WIN DVD please refer to the makers website or read me file for a detailed list).
    File type (format) File name extension .
    Music CD Playback (CD audio) .cda Audio Interchange File Format (AIFF) .aif, .aifc, and .aiff Windows Media audio and video files .asf, .asx, .wax, .wm, .wma, .wmd, .wmp, .wmv, .wmx, .wpl, and .wvx Windows audio and video files .avi and .wav Windows Media Player skins .wmz Moving Picture Experts Group (MPEG) .mpeg, .mpg, .mv, .mp2, .mpa, .mpe, .mp2v*, and .mpv2 Musical Instrument Digital Interface (MIDI) .mid, .midi, and .rmi AU (UNIX) .au and .snd MP3 .mp3 and .m3u DVD video .vob Macromedia Flash .swf Microsoft Recorded TV Show .dvr-ms*
    NOTE: WMP defualts to 2.. To enable 5. run WMP0. Click on tools then point to options. Navigate to DVD then open up the advanced window. In here is everything you need to set things up.
    NOTE: If you mess things up simply return to defult settings and start over.
    Some common errors you may encounter with WMP.
    Error messages are identified by numerical IDs, such as C00D0BC2 and 800704CF. You can determine the ID of a specific error message by clicking the More Information or Web Help button on the error message when you encounter it. The resulting page will indicate the error ID.
    : Error's C00D6A and C00D9A while playing DVD's or MPEG-2 content.
    This is directly related to either your current video card drivers or the MPEG-2/DVD decoder you have installed (EG: PowerDVD, Win DVD etc ). Reinstalling and/or uninstalling the MPEG-2/DVD decoder (PowerDVD, Win DVD ) and/or video drivers should fix the problem for you.
    You should now be able to re-install you decoder ( Power DVD etc ) and continue its use.
    Erro : C00DAC:
    Cannot play the file Windows Media Player cannot play the protected file because there is a problem with your sound device, such as a sound card or sound controller. You might encounter this error message for one of the following reasons.
    Your sound device requires an updated driver. ( update driver )
    The selected sound device does not support Secure Audio Path (SAP).
    If you have multiple sound devices installed on your computer, try using a different one.
    To use a different sound device, on the Tools menu, click Options, and then click the Devices tab. Double-click Speakers, audio device to use, click a different device.
    Error : "divide error in module IVIAUDIO.AX at".
    Only exists in systems that have various Sound Blaster Li've sound cards and WinDVD installed.
    This is infact a compatibility problem between these products. The problem is realized when MP3 oriented applications call upon certain sound card services making it look as though the error was raised from within the application in question.
    FIX:Uninstall WIN DVD. Reinstall WMP and AC3 filter and then reinstall DVD WIN.
    A simple but rare issue.
    ModName.Win DVD "msvcrt.dll" and/or Win DVD MFC application error.
    FIX:
    Uninstall any java filters. Macromedia and Macromedia Acti'veX.
    ( to remove Acti'veX go to C:\WINDOWS\Downloaded Program Files and delete the Acti'veX )
    What are codecs Codecs/Filters.
    Codec stands for Coder/Decoder. Basically it is a piece of software or a driver that adds a support for certain video/audio format for your operating system. With codec, your system recognizes the format the codec is built for and allows you to play the audio/video file (=decode) or in some cases, to change another audio/video file into that format (=(en)code).
    For example, when you install Windows to your home computer, Windows installs automatically most commonly used codecs into the system, so you don't have to download them separately from their vendors. However there are some codecs that are widely used, but not installed by Windows. Most notably DivX , MPEG-2.
    Get all the Codecs/Filters/Plugins you could ever need from:
    http://www.free-codecs.com/AC3_Filter_download.htm (ac3filter__0a_rc5)
    http://www.free-codecs.com/
    NOTE: ( XviD-.0.3-2022004 for Divx ) Stand alone codec for playing Divx instead of the Divx full install.
    http://www.microsoft.com/windows/win...0/default.aspx
    Ok, you now should be all set.
    However Codecs/Filters/Plugins are like any other kind of software installed and things can go wrong. If things are not working as they should try the following.
    Download and install "Gspot"
    http://gspot.headbands.com/download.htmlBuild 0307 - 23 KB Run the programme and simply point to system and select "List Codecs and other Filters"
    Its a no brainer really to know whats what here and how to use it to find out the source of the issue, if you have one. If its red, its bad so you then need to trace the Filter/Codec to its source and remove it.
    Here is just one very simple excample you may encounter and how it was fixed.
    If you have ffdshow file is missing error pop up while running a player application, first go to C:\WINDOWS\system32 and search for ffdshow.en. Its proberly not here though. If it is just leave it be.
    NOTE: ffdshow is used for AVI/Xvid enc/dec source.
    To fix this "ffdshow Video Codec file is missing " error Simply uninstall your Xvid codec or your entire DivX programme, or any other Filter/Codec you have installed for playback of DivX files and AVI Video Files.
    (Some times it seems a few Codecs/Filters dont get along so you must be aware of what you install).
    Cheak "Gspot" again and Filter should be removed from the list.
    Now you can reinstall the Xvid filter "XviD-.0.3-2022004" or your desired DivX programme.
    Now go back toC:\WINDOWS\system32 and search for ffdshow.en. It should be there if it was not before. If the issue is back try a different version of required Filter.
    So, thats just excample of a simple fix that got everything working again. Its not to hard to find out what the problem Codec/Filter is and then its just a case of uninstalling it. You can re-install the Codec/Filter but you should double cheak with "Gspot" and ensure the issue has not repeated itself .
    If it has you can try and find out if the issue is related to another type filter causing a conflict or use an alternate Filter/Codec that will perform the same task .
    Search for an updated version of required the Codec/Filter also.
    Ok, thats pretty much the basics in getting correct and stable 5. sound working the way it should with your new Creative Audigy 2 ZS sound card.
    I hope this has been of help.
    Regards,xmn.
    Message Edited by xmn on <SPAN class=date_text>2-24-2005 <SPAN class=time_text>08:02 PM
    Message Edited by xmn on <SPAN class=date_text>2-24-2005 <SPAN class=time_text>08:04 PM
    Message Edited by xmn on <SPAN class=date_text>2-24-2005 <SPAN class=time_text>08:05 PM
    Message Edited by xmn on <SPAN class=date_text>2-24-2005 <SPAN class=time_text>08:05 PM
    Message Edited by xmn on <SPAN class=date_text>2-24-2005 <SPAN class=time_text>08:09 PM
    Message Edited by xmn on <SPAN class=date_text>2-24-2005 <SPAN class=time_text>09:29 PM
    Message Edited by xmn on 2-26-2005 03:07 PM

    BUMP, just incase its been missed by a new board member

  • How do I connect my Apple TV to my Philips surround sound DVD system?

    I can't seem to get surround sound when watching Apple TV (or when watching live or recorded TV via my Virgin Tivo). I use a three-years old Philips DVD home surround system to get surround sound when I'm watching Blu-Ray (I have connected my Philips Blu-ray and my Philips DVD player without difficulty). But I can't figure out how to get surround sound whne watching Apple TV. I bought an optical cable with an audio jack on one end, to connect to the DVD player and the optical end clicks into the ATV. Still nothing. Any ideas?

    The surround system seems to support digital audio - it has settings for HDMI audio and video (even though it doesn't actually have an HDMI port) I bought the optical/audio cable on the advice of a staff member in the Apple Store, but frankly, she didn't see, to understand my problem. She recommended I insert the cable into the "MP3 cable IN" port but that' not working.
    I'm probably not explaining myself very well - bottom line: I have a DVD surround system and an Apple TV, so how do I connect them?

  • How can I connect my apple TV to my surround sound system without running any extra cables?

    I have my Apple TV connected to my TV via HDMI. The TV is connected to an auxiliary box that outputs sound to house speakers. I don't want to run any additional wires because of the distance to my auxiliary box and the fact all my wires now run through the wall. Also the auxiliary box lacks any extra HDMI ports.
    On cable, the TV sound plays surround sound, but on the Apple TV sound plays from the TV itself.
    Is there any way to alter settings on the TV (LG LB6100 Smart TV) to change the sound source?

    if you have a router and set it up for wifi and have ethernet plugged in then point your iPhone to that router and it will connect to the ATV.

  • HT1454 i connect my iPad to my tv with hdmi cable but the surround sound from the receiver is not working why is this?

    i want to play my ipad on through my tv and receiver to get surround sound (not using the tv speakers) I connect the htmi cable to my tv and ipad do i need more cable to get my surround sound to play the audio?  i thought hdmi did it all.

    if you have a 6th or 7th gen classic, you'll have a have the video out cable from apple.  only the 5th gen will play with a generic 3 connector video out cable.

  • How do I connect Apple TV and surround sound to my projector?

    My current set up is that I have a projector connected to my Blu-Ray player. My surround sound speakers connect to my Blu-Ray player. They all came in the box together and the speaker wires all go into the Blu-Ray. Everything works perfectly.
    However now I have bought an Apple TV and although I can play it through the projector, the sound is only through the projector and not the surround sound. I tried plugging the Apple TV in the HDMI in the projector and then connecting the Apple TV to the Blu-Ray via optical cable, but that didn't work.
    In the back of the projector there is 1 HDMI port and an audio port but no optical port
    In the back of the Blu-Ray, you have the speakers, the HDMI, the audio in and the optical port.
    How can I connect everything so that I can use my Apple TV with surround sound?

    The manual doesn't say anything an optical port on the BD ?

  • Connecting my MacBook Pro to my DVD Surround Sound Speakers?

    I'm a student filmmaker in the UK and pretty much do all my video editing from my bedroom using Final Cut Studio. I am using a MacBook Pro3,1 (bought in 2007) and have recently decided that I want to start working in 5.1 surround sound.
    As I have no surround sound speakers with my MacBook Pro, I was wondering if it would be possible to connect it up to my DVD surround sound system? This would ultimately save me having to buy a compatible set and having two lots of surround sound speakers around my room...
    My DVD player is a Panasonic SC-PT150. The 6 surround sound speakers each connect to it through the standard +/- "clip-in" wire set up (which, obviously isn't compatible with my MacBook Pro). There are also two AUX sockets (one for Left and one for Right) on the back of the DVD player. So far, I have tried connecting my MacBook Pro to these sockets using a Mini plug to RCA cable, however, all I get is an incredibly loud humming noise.
    Does anyone have any suggestions as to how I might, either overcome this problem or, get the setup to work another way? Thanks in advance for your help.

    Thanks both of you for your help.
    It doesn't mention either of those connections in the manual, however, yes you are right, it takes digital input. I'll have to call and check if the toslink cable is compatible.
    I tried connecting the mini-stereo-to-RCA cable to my Nokia phone (which is actually where the cable came from) and that plays through the DVD speakers just fine, when i select AUX mode. Although, as you said, it only plays stereo.
    Say the mini-toslink cable is compatible, would I need to get a 5.1 surround sound card for my MBP?
    Thanks again.

  • On Demand Surround Sound doesn't work using X1 Xi3

    I have a Pace XG1v1 DVR and the Pace Xi3 satallites. My problem is that when I watch a program using On Demand it will not play in Surround Sound. Works perfect on the main XG1v1 box but not the satellites. Everything works fine on live or recorded programs just not the On Demand on the Xi3s! I have the Xi3 going into a Vizio TV then the optical cable coming out of it into a Sony Receiver. Yes, I have swapped out the companion boxes, keeping everything else the same, and the main box pushes the surround sound through when using On Demand. It only happens with the companion boxes; all 3 that I have! Is this a known proplem or what setting can I change to fix it? Please help.

    ComcastPhill,
    This is the 3rd time deputylynch has posted this and I believe ComcastNick or ComcastZach has already reached out to him.
    I am all for getting problems solved but lets not unnecessarily duplicate efforts.
    The OP has already received a great deal of help and input on this issue.
    ComcastPhill wrote:
    Hi deputylynch this is a unique issue that I am going to research and possibly escalated for you. I will let you know if I hear any updates or have someone contact you directly. Thank you

Maybe you are looking for

  • IPad 4 online games not working properly

    ever since the release of the new update, I am having difficulty connecting some game apps online. These includes Conquer online (cannot connect to game server), Injustice (online game wins not credited) and Deer Hunter 2014 (automatic updating not f

  • How to Immediately Change Counter Output Rate?

    I have a piece of code that largely works like this example: http://zone.ni.com/devzone/cda/epd/p/id/5493 In other words, I set up the Counter Output with some initial frequency and duty cycle, but then during the main loop of my program I continuous

  • Ipod touch wifi isnt connecting

    I am having a problem with my ipod touch i am not able to connect to the wifi, my brothers ipod is working on the wifi but mine isnt, it says 'unale to join the network" can anyone help me??

  • Controlling area currency copied to cost condition: DP90/91

    In my example, the transaction currrency is 0 USD but the CO area currency is -15.09 AUD. I can see that after running DP90, the controlling area currency has been picked up. When I checked ODP1 for transaction currency characteristic, the 'No summar

  • Pages as attachments

    Any explanation as to why all my Pages documents get zipped when attaching them to email?