Powerbook turns on and beeps, nothing else

I've had my Powerbook since late summer and it's been working fine up until this morning.
I put the computer to sleep last night like I always do, then when I tried to bring it back from sleep this morning it was nonresponsive. I restarted and it worked fine for a minute, then a message came up that said it needed to restart, so I did another restart. This happened once more, before the computer would no longer reboot.
Now all it does whe I turn it on is make the usual initial signs of functioning, then it beeps three times and stays black.
Does anyone know whats going on here?
(Resetting the PMU has absolutely no effect whatsoever)

This may apply to you. Three beeps is a symptom of the "Bad Memory Slot" syndrone.
http://docs.info.apple.com/article.html?artnum=303173
...and this
http://discussions.apple.com/thread.jspa?threadID=318677&tstart=0
...and this
http://discussions.apple.com/thread.jspa?threadID=227329&tstart=0

Similar Messages

  • I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    YOU ARE IN RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • How do I use icloud to restore my documents that were in Pages? Pages got stuck in "waiting" to update and when nothing else worked I deleted it and reloaded Pages. I don't want to restore everything just my Pages documents.

    How do I use icloud to restore my documents that were in Pages? Pages got stuck in "waiting" to update and when nothing else worked I deleted it and reloaded Pages. Everything I can find is about wiping everything out and restoring everything. I don't want to restore everything just my Pages documents (and numbers and keynote that also locked up during updating).

    What I meant is turn off Documents and Data in iCloud in OS X. Keep it on on your iOS devices. iCloud will sync documents between the iOS devices and make them available on the iCloud web site, but it won't mess up iWorks' open and save dialog boxes. It also won't assume that you want all your documents in iCloud, which I think is undesirable anyway.
    Keep iOS and OS X separate, and use the web site to move files between the two as necessary.
    iOS iWork is different from OS X iWork. There are fewer fonts on an iOS device. iOS iWork programs have slightly different feature sets than OS X iWork programs, and the file formats are different. iCloud automatically converts the file format when necessary, but if you make a habit of saving things directly to iCloud, you are limited to the lowest common denominator between the two versions of iWorks. So why would anyone want iWork on the Mac to open and save documents on iCloud by default?
    If you want to store files in the cloud and sync them on your Macs, SugarSync is a much better solution. It lets you choose your sync folders, it doesn't make you reorganize your files, it lets you sync all file types, it doesn't convert files to a different format and back, and it stores everything in the cloud, too. Just the simle act of saving a file backs it up and syncs it. I wouldn't live without it. iCloud is best with iTunes purchases and synchronizing Mac settings and iOS files; I woudln't live without it. The two make an unbeatable combination.

  • I just installed itunes 10 and all it does when i open it is show me the software agreement, and if I click "accept" or "decline" it closes and does nothing else. It does the same thing when i try to play music on it. (By the way, I have Windows XP SP3.)

    I just installed iTunes 10 and all it does when I open it up is show me the software license agreement, and if I click either "accept" or "decline" it closes up and does nothing else. It does the same thing when I try to play mp3 files, just opens up the license agreement and nothing else. It also doesn't recognise my iPod touch when I plug it in, thinks it's a digital camera. Please help! (By the way, I have Windows XP SP3.)

    Refer steps here to delete SC file.:
    http://support.apple.com/kb/TS2363
    Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

  • Help!  My computer turns on, but does nothing else!!!!

    When I turn my computer on, the screen lights up and a folder with a question mark appears. Nothing else happens and after a while it shuts down. My computer is totally charged and I've tried taking out the battery, turning it on and off, restarting, etc. Nothing works! Does any one know what the icon means/how to fix it?
    Thanks

    This is the issue your are experiencing:
    http://docs.info.apple.com/article.html?artnum=58042
    Try this:
    1) hold down c key with disc one in the drive
    2)select language
    3)Click on utilites in top menu bar > select disk utility
    If you see your hard drive in there, it will most likely say "xx GB FUJITSU ...", then go back to the OS X installer by quitting disc utility and follow the rest of these instructions. If you don't see a hard drive then most likely your drive has failed, take it to your nearest apple store. Make an appointment with the genius bar before your arrive!!!!! http://www.apple.com/retail.
    4) Select Archive and Install when you get the screen that has a box named "options". Selecting this will save your user's data, you may need to reinstall third party applications after this ( ie. office, photoshop, etc. )
    Hope this helps.

  • PlayBook only red light comes on when connected to charger/usb and then nothing else HELP PLEASE !!!!

    got a playbook which all of a sudden starting doing this tried the debricking method tried connecting ot my mac without the battery and still nothing doesnt connect and also tried on pc but still nothing someone please help i need to get up and running asap 
    Thank You 

    mangera wrote:
    got a playbook which all of a sudden starting doing this tried the debricking method tried connecting ot my mac without the battery and still nothing doesnt connect and also tried on pc but still nothing someone please help i need to get up and running asap 
    Thank You 
    without a battery in what?
    You will have to keep presssing the power button every so often whist on charger until the red light stays on. Got a few hours to spare? like whilst watching TV?  
    Check out the other solutions in the sticky thread, start around page 60.

  • MacBook Pro not turning on and beeping?

    Help. my MacBook Pro 2010 was just working fine and it randomly shut down. I felt it hot on the bottom. I googled it and said my ram was loose so I tried putting back in and it's still beeping away. I tried pulling the battery out and putting it back in and it's still beeping. I need help. the light on the bottom right flashes as it beeps. it beeps then pauses for about 5 seconds. and beeps again repeatedly. the beep sequence is beep.... beep.... beep... beep..
    help me please. thanks in advanced.

    http://support.apple.com/kb/HT1547 
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usable

  • PB won't turn on and beeps three times

    My mac went to sleep automatically and when I went to wake it it took a while before coming back online. Once online it took about 1 minute before freezing. I held the power button down and it finally turned off. Now when I try to start the computer the sleep light starts blinking and the computer beeps at me two or three times than does nothing. I have removed the battery and tried restarting it with just the power cord and I have fully recharged the battery and then tried starting it yet it always does the same thing. Please help! I am deployed and the powerbook is brand new.

    If it beeps precisely three times on startup, it means the Ram hasn't passed the startup test. Either one or both banks are faulty. Try and run the apple hardware test on your restore CD/DVD if you can. Insert the disk, restart, and hold now option (the alt key) and select the apple hardware test volume. You could also open the memory compartment and remove one of the banks, swap them round or reseat the ram (experiment to try and track down the problem).
    If you not confident with that, it looks like a call to applecare will be appropriate in any case.

  • My MacBook won't turn on and beeps at me

    Hi,
    I took my MacBook in to get the casing replaced becuase it was breaking off around the hand rests.
    I got it back, and charged it fully. Then I tried to turn it on. I got the flashing question mark folder. So I kept trying to turn it on using all of the help from the instruction manual. I've gotten it to load up, I enter my password, and it freezes, get to the main page and freeze, but 90% of the time I get nothing or a flashing folder.
    I can't insert a disk, or eject a disk using the help provided by Apple.
    Most of the time when I start up I get a succession of 8-12 beeps. I also get them if I get to my password or desktop screen.
    I reset the PRAM and nothing seemed to change, except now before I enter my password (before it freezes) I can change the screen brightness which I couldn't do before.
    Also, when I load up to my desktop, all my files are there. so I know my hardrive isn't burned out.
    Thanks for ANY help!

    This is likely a RAM issue. Have a look at this Apple KB article and specifically part B.

  • HT4993 my  iphone 4s turned off randomly and it wont turn back on, i tryed connecting it to my laptop to see if it will turn on and still nothing, i connected it to the charger, for about an hour and still nothing... why?

    so i picked up my brother from school today and on the way i was getting alot of texts and i read them but didnt reply, then i put my iphone on the arm rest thing, and when i came home, it didnt wanna turn on, idk why... it was around 80 percent battery and it wont turn on! i tryed connecting it to my wall, and nothing then i tryed to connect it to itunes, and nothing comes out, its already installed to my laptop but when i connect it, it wont turn on or open itunes please help!

    Connect to Wall Charger again and Reset, hold both home and power buttons for about 20 seconds until the iPhone begins to start.

  • Adobe Reader 11.0 won't install through firefox - click save and then nothing else happens

    Adobe Reader 11.0 won't install through firefox - I click save file when requested it switches to Step 2 of 3 but nothing is there and I have waited for a very long time for it to load.  Anyone else have this problem?

    Hi Pat,
    After your last email I decided to continue to trouble shoot the problem and finally found the answer from another user.  Oddly enough when using Firefox it will default to a location on your computer to save downloads.  If it encounters a problem it doesn't identify it, the program just "loops" back to the start of the download sequence.  Once I changed the folder that the downloads are sent to the original way of upgrading occurred without fault.
    I will go back into the discussion group and credit you with the answer because I really appreciate your assistance.
    Thank you, Jim
    [private data removed]

  • My ipod has only the apple symbol and does nothing else

    I have plugged it in and opened itunes. Nothing is there to sync. It will not power off.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • MacBook Pro. Wont turn on and beeping.

    My MacBook Pro screen turned several different colors and began beeping. I shut it off and now when I try to turn it on it beeps and the power light flashes. HELP

    If an SMC reset does not help, make an appointment at an Apple store genius bar:
    http://support.apple.com/kb/HT3964
    Ciao.

  • HTML5 video player won't load YouTube videos (and probably nothing else either)

    When I request that YouTube use the HTML5 video player for videos, no videos will load - I have to switch to Adobe Flash for anything to play. The page for a video will finish loading and I'll just sit there watching the loading spiral of death ceaselessly. I've tried a number of suggestions from other threads with similar issues and nothing's helped.
    - Safe Mode does NOT fix the problem (so it's not an add-on or script issue)
    - Clearing cookies/cache does not work
    - Toggling the media.windows-media-foundation.enabled setting does nothing
    - Disabling hardware acceleration also does nothing
    I'm at my wit's end. Flash will hang and crash REALLY often so I don't want to use it, but it's the only thing that works for YouTube. Please help.

    You have to download and install Adobe Flash. Flash is not pre-installed.
    http://get.adobe.com/flashplayer/

  • IPhone keeps saying "Please Connect to ITunes" and does nothing else

    I have it connected to the computer with ITunes running and it will not do anything. I have tried updating ITunes, restarting my computer, etc., and nothing works. I cannot get it to sync either. This is my work computer. My main ITunes computer is at home and I can't access it right now.
    What can I do to where I can use my phone???? Please help.
    Thanks.
    E

    If nothing is working, and you've made sure you have the latest version of iTunes. I'd take the phone into your nearest Apple Store. If you don't want to go there yet, call 1-800-MY-IPHONE. They may have tricks to help you.

Maybe you are looking for

  • Vendor Payment Block in FI

    Hi all, We have a requirement to automatically block all vendor line items coming from electronic bank statement.  What is the best approach to do this?  Please note we are not entirely blocking all vendor line items, only the ones coming from electr

  • Backup How To

    Hello to all! With iOS 7 coming out some time soon, this fall according to Apple, it's time to make sure we all have good backups to make sure we don't loose anything. This is just an overview of how I make sure my stuff is backed up and safe.  All t

  • How to fix the program???

    Hi all, I'm writing an application which need to use a vector to store data from a file when the program starts. Then, after the user input new data and press "Save" button, the new data will be append to the vector. The following code has error. May

  • Standard report Q's.

    Is there any EASY WAY to add fields to SAP standard report than copy and create a custom one? I am not a security expert but any idea's on how to restrict access to certain standard reports for certain user's? I dont want them to run any report who h

  • MDX - Help with IIF syntax

    I have a member in Accounts named 'Marketing' that needs a MDX formula with this logic: If the current member in the Market dimension is an idescendant of 'Total_Markets' Then [Corp_Level] * ( [Sales] / ( [Sales] , [Total_Markets] ) ) , [Corp_Level]