Powerbook w/Lid closed

Greetings to all!
I'm just wondering... What is the general opinion on running a Powerbook with the lid closed?
I was planning on using my 17 Inch with the lid closed, running Kismac and a BT GPS Reciever. I might stick it in the Brenthaven case I have with the rear vents facing upwards, although, I think this might overheat the unit.
Will I damage the PB by keeping it on and closing the lid?
Cheers!

Howdy Cap.
Lid closed sitting an a car seat or such, I would think it would be OK. The vents are found on the sides and back.
As far as in the bag. Bring some bacon and eggs and at least get some breakfast out of the small fire it will produce.
Kal

Similar Messages

  • Is there a way to turn on Powerbook with lid closed?

    My Apple display allows me to turn on the Powerbook with the lid closed by pressing the touch button on the display.
    My question, is there any other way to turn on the Powerbook with the lid closed, perhaps through some USB peripheral or keyboard (with external display and AC power connected)? In other words, I want to know if I can have the same functionality as the Apply display's touch button through some other device or method.
    If the Apple display can do it, there must be some other device or method to do it, but I can't seem to find any. Any help would be appreciated, thanks!
    12" Powerbook G4 1Ghz   Mac OS X (10.3.9)  

    Thanks. But is there a way to turn on the Powerbook (as opposed to wake from sleep) through the use of some USB power swtich button or other method?
    I want to hook it up to a non-Apple display (with the Powerbook AC power connected) and be able to powerup the Powerbook without having to open the lid.
    I looked on the web for this answer, and it seems some older Powerbooks allowed a USB power button to seperately turn on the computer but this feature was not offered to Powerbook G4 or later. While not necessarily through USB, but if the Apple Display can turn on my Powerbook (with the Powerbook AC power connected) then it seems technically possible and I would think there should be some alternate methods to do the same thing.
    12 Powerbook G4 1Ghz Mac OS X (10.3.9)

  • Can you watch movies with lid closed on Powerbook G4 that's connected to TV

    Hi there, is it possible to have a Powerbook G4 connected to a TV and watch movies with the Powerbook's lid closed.

    yes, but you need some sort of device like a mouse or a keyboard to "wake" it up. can be wired or wireless.
    an app called "caffeine" may also work, you can try it, it's a free utility that keeps the machine awake.
    http://lightheadsw.com/caffeine/

  • Computer freezes in lid-closed mode when connected to external display

    I have a Sylvania SC190 CRT display connected to my Powerbook via a VGA to DVI adapter. Every time I put the computer in lid-closed mode and try to run it off of just the SC190, after a few minutes it freezes up and I have to hard restart it(hold power button down).
    Now, a few days ago, my powerbook stopped recognizing the display as an SC190, and just recognized it as a VGA Display. Don't know if this is relevant, as I have never used lid-closed mode before.
    Does anyone know what the problem is, and/or what I can do about it?
    Thank you.
    PowerBook 15" G4 1.67 GHz   Mac OS X (10.4.8)   512MB, 80GB, SD-DL

    I have the exact same problem.
    Here's my story:
    To give you some backgroud, my setup involves having the macbook on a mstand hooked up to an external monitor. I run a usb hub from my macbook, this is where my mouse transceiver is plugged in. I use am Apple wireless bluetooth keyboard (latest slim model)
    I recently purchased the 13.3' inch 2.26 MBP as I gave my older 2.0 uMB to a family member. The computer is in the stock configuration with no hardware upgrades.
    I have noticed weird behaviour when waking the computer from sleep when the lid is closed. When i wake the computer up (by tuning on bt keyboard), the keyboard light blinks like there is not bt connection and the computer will wake in an inactive state. The led light will be on, but when i flip the screen up....nothing. Screen is dark, keyboard pressing does not illicit any responses. I have to do a hard reboot by holding down the power button to restart the computer. Unfortunately any previous data or work is lost.
    I work in IT so I completed troubleshooting and also things outlined on forums in google. Reset PRAM, reset SMC and also reinstalled OSX. Still I get the same result. Fearing I purchased a defective unit, I called Apple and they told me i could exchange the computer so I dropped by the apple store and exchanged it quite easily.
    I've spent hours restoring from time machine and I am experiencing the same issue on my new laptop. I'm now assuming its not hardware but more firmware related as I had to do a bluetooth firmaware upgrade when I bought the computer when I checked for software updates.
    Is anyone else having any wake issues with their new MBPs? And what should I do next? Should I exchange for a 3rd unit? Thanks for you help everyone.

  • Why doesn't the Macbook work lid-closed??

    I've only just discovered that the Macbook will try to go to sleep every time i close it's lid. For me, this is possibly the most annoying thing that any laptop could ever do!
    I know the Macbook is designed for lid closed use when external keyboard, mouse and display are connected. But if it doesn't overheat in this situation, then why should it be a problem without any of these connected!?
    I use my laptops esentially as desktops. Download and encode video overnight, play mp3's 24/7 and don't want to leave the lid open for dust to collect just to be able to do these things.
    Can anyone think of anything to explain this crazy behaviour? Or vouch for the use of software to work around this, such as sleepless.
    Macbook (White) 2.0GHz   Mac OS X (10.4.6)   - 2Gb RAM, 80Gb HD

    Wtihout knowing Aple's specific reasons I would think that it were a safely reason. With the lid closed it would hence but unknown if it were on. There are no lights or anything to say this so potentially you can grab it and move it as though you would when off. Thi s could be extremely bad, even with the sudden motion sensor.
    When it is connected to an external monitor you will at minimum have to disconnect it and USB mouse/keyboard which does give you time to think that it's on.
    I have the same issue as you do though as I have a PowerBook currently running as a server. I use a very high tech device to keep the lid open just enough to keep the thing from sleeping.… it's called an eraser.

  • Bezel separating? / lid closed mode

    I've been operating my MacBook in lid closed mode for a week now. This morning I noticed that the plastic bezel on the left side and at the bottom of the display are starting to display small gaps with the LCD. Is this something I should be concerned with? Thanks.
    MacBook   Mac OS X (10.4.7)  

    This is my question too, so to save a new thread I'll chime in here.
    When I used an ibook, extensive googling yielded the concensus that the ibook should definitely not be run with the lid closed as the machine is ventilated through (or partly through?) the keyboard. In contrast it was said that lid closed mode was fine for the powerbook which was ventilated through the case somewhere.
    As far as I can tell the ibook and macbook have pretty similar cases, including what I assume is a vent at the back. (Actually on the ibook it looks more obviously like a vent, as it has a grill.) I don't have access to a powerbook to compare.
    So I guess that still leaves me asking whether it can be confirmed that the macbook is definitely safe running with lid closed (which is how I've been using it). Is the rear vent on the macbook more efficient than on the ibook? Or is the thing on the back of the ibook not actually a vent at all? ???
    Can anyone shed any light?

  • Lid Closed Mode on an 867?

    I am surethis has been covered in these forums somewhere, but I must be using the wrong search terms, b/c I can't seem to find a conclusive answer. So here it goes:
    Can I run my 12" aluminum 867MHz Powerbook with the lid closed while attached to an external display? Or is that an option only on the newer (newest) PBs? I know iBooks need the keyboard clear to help dissapate heat. Is that an issue with my PB as well?
    Thanks!

    Hi,
    I've been using my 867 Mhz PowerBook with the lid closed and connected to an external display, keyboard, and mouse ever since I bought it in March, 2003. I've had no heat-related problems at all. However, whenever I have a chance, I prop up the back end of the PowerBook on somethat that will raise the rear of the machine off the table about an inch or so to allow for better air circulation underneath it, where it seems to get the hottest. I didn't do this as a response to any problem, but when I realized how warm the underside of the machine gets, I figured it was a prudent thing to do.
    Ken

  • Network Disk Disconnects With Lid Closed

    USB disk connected to Airport Extreme is lost when I close the lid of my PowerBook G4. I am using BT keyboard and mouse and external display.
    Message was edited by: George Carty
    Message was edited by: George Carty
    Message was edited by: George Carty
    Message was edited by: George Carty

    Even if you have the computer configured to run with its lid closed, closing the lid shuts off its network connections until it is woken up again unless software such as SleepLess is used.
    (29490)

  • PB battery drained overnight while lid closed....any thoughts?

    This was the first time I've experienced any problems with my PB. Last night I left the office and closed my lid as always. My PB was unplugged from land power. I watched, as I always do, the Apple light go off and my standby light come on, then I went home.
    This morning I came in, opened it, logged in and immediately got a notice that the battery was low. I attached the power cord and noticed I had about 2% battery life left. Now, the only thing I can think of, since all known applications were closed, was that I connected to my network via CAT5 and not wifi. I'm wondering if something was going on over the ethernet??? I have no idea why my battery would have been drained overnite with the lid closed. I searched the logs and nothing strange pops up.
    Any thoughts?
    Tom

    In general there is always a trickle drain happening even with the lid closed. Some applications may leave the Powerbook on, or wake it from sleep on a timed schedule. Turn off the lights to see if the Apple logo is lit to verify it did indeed shut off the screen. There have been known applications to be open that force the machine to keep the screen on even when the lid is closed.
    The battery is technically known to last 5 hours on limited charge, that closed as you surmised is able to last longer. But how much longer varies depending on just how full the battery was before you unplugged it. The reading on the menubar of it being full is not necessarily accurate.
    I would not leave it on Energy Saver overnight all the time. At least once a month leave it on screen saver instead. Unattended someone could also steal the machine in the middle of the night. I would not leave it unattended. Especially in an office environment it shouldn't be unattended unless under lock and key.

  • 10.4.10 problem running with lid closed

    Installed 10.4.10 last night, and now I'm having a problem running with the lid closed.
    Every day at work, I connect my PowerBook G4 1.33GHz to an external display and USB keyboard/mouse (through a USB hub). I have plenty of room on the external display so I don't use the attached LCD panel - I just close the lid and tuck the computer under the monitor riser. It takes a couple seconds for everything to "adjust" when I connect all the hardware (screen turns on and off once or twice), but it always settled down within 10-15 seconds.
    After installing 10.4.10, this configuration is totally unusable. After the external display wakes up, I only have a few usable seconds before the computer goes back to sleep. I can wake it again immediately by moving the mouse or hitting a key on the keyboard, but it never stays awake.
    I've tried two different USB hubs as well as directly connecting the keyboard and mouse to the laptop, but I get the same behavior in all cases. If I open the lid, the LCD panel comes on and everything works fine (I can use the USB keyboard/mouse and the external display).
    Has anyone had a similar problem since updating to 10.4.10? Like a fool, I rushed right into installing the update without doing a backup, so I'm stuck unless the problem gets fixed or I do a rebuild with 10.4.9.
    PowerBook G4 1.33GHz   Mac OS X (10.4.9)  

    Take a look at this link, http://support.apple.com/kb/HT1776

  • Mac book pro is very very slow/it hangs for even the smallest tasks/even with the lid closed it is still running if it is not completely turned off. Dose any one know what may be wrong ? and how to fix it?

    More details about the problem : My computer is a Mid 2012 Mac Book pro 2.9GHz i7 processor with 8GB RAM updated to OS X v10.8.5
    - I ran a compleet scan of my computer for any threats ( I used virus barrier express ) and there was nothing identified
    - When I oppened the Activiti Monitor there are about 20-30 processes which I do not undersatand they are run under the user "root" 2 in perticular ( Kernel_task & fseventsd ) they both take up a lot of threads and kernel_task is constantly using 1.2 GB of "real memory" which is at least 20 times any other process that is running espesially the ones that run under the user "Apple" I do not know if this is causing the problems on my mac but i tryed to forces close it and it dose not even let me click the button, the others close but reopean immideatly. I will attach a screen shot of what i have mentioned here.
    - The problems I am facing are mainly performance :- To state a few examples, my mac dose not seam to be able to handile even the smallest tasks like switching tabs on safari, typing any thing, playing a movie withought stopping inbetween, etc.. ( let me elaborate on why I said its not able to handil these tasks, it is because when I am trying to do any one of the afformentioned tasks inbetween the cursor becomes a rainbow collered spinning disk and I am unable to do anything for about 10 seckonds after which it starts to work again for some time before it happens again. )
    - Another concern of mine is that my mac seems to be on even with the lid closed if I do not shut it down compleetly, if i just close the lid after some time the computer starts warming up, and the fan starts running. the battery is drained at the same rate or slightly less rate than it would have if i was using it normally with the lid opean. ( altough this is happning the screen dose not turn on untill the lid is opean again )
    - I have only 300+ GB full out of my 750GB so i believe these are not issues caused by my mac's memory being full ( BUT THE FIRST TIME I NOTICED THIS WAS HAPPNING WAS WHEN MY MEMORY WAS ABOUT 720GB FULL WHEN THESE ISSUES FIRST AROSE I IMMEADITLY DELEATED 400+GB OF MY USELESS FILES THAT I HAD BEEN HORDING ALL OF WHICH WERE MOVIES ) that about covers it all PLEASE LET ME KNOW IF ANY ONE KNOWS WHAT TO DO.
    Ps: I apoligize if I have given too many unrelevant details, not enough usefull information and or if i was just all over the place with my explanations but I am really frustrated and was hoping not to miss anyting. Please let me know if any information at all is required and ill do my best to provide it.
    Thank You

    Start with this comprehensive troubleshooting article:
    https://discussions.apple.com/docs/DOC-3521
    Look at this one for possible solutions:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • How can I use an external display with my MBP lid closed and disconnected to power?

    I know that I can use an external display when my MBP lid is closed and it is connected to power. I was wondering why it does not work when the power cable is removed.
    I only use an external display when I am at home so my MBP acts like a Mac Pro or Mac Mini in that way, but it is not good to leave the battery charging constantly on a MBP so I want to disconnect the power and use external display and have the lid closed. Is this possible or do I have to leave my lid open when running on battery power?

    I'm plugged into my wall socket at least 90% of the time - probably more. I always make sure that I take my MBP off mains about once every two weeks and let it run down to about 30-40% and then plug it back up. This keeps the ions flowing and the battery healthy. My MBP will be one year old on March 20, 2013, and my battery health is still at 99%. I run in clamshell mode most of the time now - since I bought a 27" Apple Thunderbolt Display. Only occasionally am I off mains - and then because I'm exercising my battery, usually.
    Don't worry about running of mains most of the time - just be sure and unplug about once every two weeks (or twice a month) and let your battery dip to the 30-40% mark and you'll be fine.
    Good luck,
    Clinton

  • How do I use my macbook pro lid closed

    How do I use my macbook pro lid closed?

    Well what i'm trying to do is keep file sharing on while macBook is closed so i can access files through "newtwok" (Back to my mac) with my imac...
    Ideally i would then control my macBook with screen sharing on my imac while the MacBook is stored behind my iMac...
    Somehow it worked before but now it stopped...and everytime i close the lid ..mac book pro goes black screen and completly disconnects from the newtwork...
    Everything works fine with lid open..
    I am trying to do this because i have a new imac with thunderbold and an older macbook pro with mini display port..and as you might already know...you canot connect these thow devices using thunderbolt cable...which really *****....there is also no adaport enabling this...and i really dont need to buy another mac book that just has one more hole in it >.<
    Anyway..hope there is a solution somewhere to keep file sharing going while lid down..
    regards remo

  • Lid closed mode--ntsc and pal

    I used to be able to put my MBP's display onto a TV using lid-closed mode and the Apple DVI-video adapter. I was changing my TV's resolution to something slightly higher, clicked the wrong setting (set the display mode to PAL), and now whenever I use lid-closed mode (or when I use boot camp to boot into windows XP) my TV (NTSC) does not work. It only does this in lid closed mode, and I've reset the PRAM to try to fix it. I can't see the TV display in PAL mode, so I can't change it back to NTSC. Please help!!! Should I reset my PMU or use some EFI command?
    15" MBP   Mac OS X (10.4.7)   using composite video on dvi-tv adapter (ntsc)

    I recommend running both the MBP (lid open) and the TV at the same time in screen spanning mode (not mirror mode). In this way, you should have complete control over the TV's Display Preferences settings from the screen on the MBP. Make sure you have the "Show displays in menu bar" check box clicked in Display Preferences. You should be able to restore the old settings you were using for your TV with this technique.
    Once you get your old settings restored, you can go back to using just the TV with the MBP lid closed again.

  • Audio & video via HDMI to an external monitor with lid closed.

    I would like to run a Macbook Pro Retina (2014) with the lid closed and all video and audio via HDMI routed to an external monitor (Samsung Syncmaster from 2010). Is this possible? When I try this, no sound is transferred to the external monitor and I cannot operate the Macbook Pro with the lid closed. As soon as I close the lid, it cuts the signal to the external screen.
    I’ve tried looking for previous posts but they’re about MCP’s connecting via Thunderbolt or DVI. Any ideas?

    Seems like there may be two separate questions here.   Audio working in either configuration   and video from HDMI when lid closed.  First, you are doing this with the Mac running off of AC, not battery, right?
    Audio:
    Is the HCMI cable you are using able to carry the audio?  Some cables don't.
    The only way I've ever used external displays with lid closed is with the thunder port (or DVI) adapter, not with the HDMI.  I see the specs from Apple:
    HDMI video output
    Support for 1080p resolution at up to 60Hz
    Support for 3840-by-2160 resolution at 30Hz
    Support for 4096-by-2160 resolution at 24Hz
    So have you tried varying the screen res to determine the results?  I can find no specs regarding what ports remain operational in clamshell.   Like you, I would have assumed all of them.
    I suspect only the thunderbolt port would support your desired config -- try a thunderbolt/hdmi adapter.
    Finally, clamshell mode doesn't allow the MBP to cool efficiently.  Heat kills electronics, so if it's too warm or the fans really kick in, you might want to reconsider this setup.

Maybe you are looking for