Powerbook won't Boot--It will Kernel Panic and Freeze Though
I'm trouble shooting a 17" Powerbook G4 1.33. When I received it, there was no hard drive, it would boot to a flashing "?". I installed a brand new 160 GB ATA drive and attempted to install 10.4. The installation went smooth and fairly quickly but when it restarted it would either KP or freeze on every attempt. It will advance past the gray Apple and spinning gear, past the blue screen, and get to the small window where OSX is loading. Once there, the bar would advance anywhere from hardly anything to maybe an 8th of the way before KP-ing.
I thought the installation may have been bad so I attempted to reinstall 10.4. I tried to boot from the disc but would get a KP at the gray Apple screen, sometimes it would get to the "choose your language" box but then mess up. I ended up having to connect the Powerbook to my G5 and erase the hard drive via Firewire and TDM. After it was erased, I thought maybe the 10.4 disc was bad, so I attempted to install a brand new copy of 10.5 Leopard. Again installation went smooth until the restart. Now it will get as far as playing the Welcome movie/graphic introduction for anywhere from 2-7 seconds and then lock up-not a KP. After this I attempted to boot from both the 10.4 and 10.5 disc and it will KP on every attempt.
Could the hard drive, although brand new, be bad? It was formatted and the OS sees it every time it gets that far into the installation. When in TDM it reported the full amount and was easily seen that way as well. FSCK reported the volume was ok. I tried swapping RAM with my sisters iBook G4 with no luck either. I removed the Airport card, thried booting in Safe Mode, zapped PRAM, reset NVRAM---nothing helps. The only time the hard drive seems to function is when it's completely erased. Once the computer tries to access it, it locks up.
Sorry about the long post. I wanted to be thorough.
A quick update. I removed the battery, RAM, top case, and then the Superdrive. I then put the top case back on, disconnected the Airport card, and installed only one of the RAM sticks. I tried powering up and it actually booted. The furthest I've seen it go was about a quarter of the OSX loading bar. This time it loaded the OS and got to Finder where I was actually able to play around with it until I shut it down. Now I have to figure out what was causing the trouble. I'm leaning toward the Superdrive but it could also be the RAM, Airport card, top case cable....Anyway thanks again for all the help. I'll update later on.
Similar Messages
-
Help with kernel panic and freezing screen?
A few months ago I had kernel panic screens about twice, but the problem didn't recur again for a while. Over the last two weeks, however, I've had two more kernel panics, and the screen freezes (mouse, all actions, etc) and the machine has to be manually restarted about every five minutes.
I've tested the two ram sticks, erased and re-installed the OS but had no luck resolving the issue.
I followed the link on resolving kernel panic problems from earlier threads to troubleshoot as much as possible. I don't have the original software so can't do a few steps, but on the whole have had no luck.
I don't have any external or USB devices hooked up when it fails. I do occasionally use USB pen drives, but that doesn't seem to be related. I bought a new, non-apple power source a while back, too, but also don't think that's related.
Before I bought the laptop from a friend, he installed a different hard drive, but I believe it came from another G4 Ti machine. He left two screws out of the bottom of the case.
I'm thinking mainboard or possible hard drive? Any ideas?
Also, since reinstalling the harddrive, I've had no error report message come up when the machine restarts, and there isn't an error log file, at least not for kernel panics (that I can find.) Before I reinstalled the OS, I read the error reports and they said something about kernels....but I don't remember what, specifically.
If there are other useful logs I could post, let me know and I'll find them. Are the console logs or directory service logs of any use?
Thanks in advance for any help or any advice...!
PowerBook G4 Ti Mac OS X (10.4)
PowerBook G4 Ti Mac OS X (10.4)Hi tjk
- Thanks for the help.
I've tested the two ram sticks
How?
I took out each stick one at a time and ran the machine with a single instead of both.
I have dual 256 sticks. The original, and a Samsung which came with it when I bought it used.
In both cases, the same problem occurred.
How much free space do you have available on your HD?
If not 5GB or more, this could be causing issues.
I had about 20GB free. Now it's running with 70Gb free and still the same problems. It's an 80 GB hard drive that was installed into the PB when I bought it a few months ago. I had the machine for about three weeks first, and didn't have any of these problems with the other hard drive in it.
I don't have the install disk, so can't run the disk utility repair, correct. I've also not been able to get the PB to boot from the disk instead of the hard drive. It brings up only the hard drive as a selection to boot from, and spins up the OSX DVD, then ejects it each time.
...not sure why...I've been holding down option when restarting to boot from other drives -- if there's another way to boot from the disk, maybe that would work...
Have a look at the Orange Ribbon Cable Issue/Fix and see if
it might apply to your PB. Which Ti do you have btw?
This is a really interesting link and for a bit I thought it sounded exactly like the problem...but I have the original TiBook, 500 Mhz so the trackpad cable doesn't run through the same spot. Maybe there's something else shorting out or pinching underneath...I'll take a look, but I'm not necessarily hardware savvy enough to know what to look for.
Thanks again for any suggestions.
PowerBook G4 Ti Mac OS X (10.4) -
Can anyone help, in the past 4 months I have had two new logic boards fitted to try and solve the problem of kernel panics and , the message saying 'please restart your computer. now since the last repair 10 days ago it has now starting freezing on me.
Apple not much help, saying take it back to be reapired again. would a reinstall of the OS solve the problem? and if I did would I lose data
Thanks in advance for replies.I've responded to your other post as I hadn't seen this one - have a look there.
Kernels are usually, but not inevitably, hardware related and RAM is the first suspect - but again it isn't the only suspect.
Chesck the other thread. :-)) -
Powerbook won't boot. Caps Lock Light and NumLock Light on. No other sounds
I'm posting a problem I'm having with my powerbook in the hope someone can give me advice as to what the problem could be. Or how i can fix it.
I have a PB G4 12" (1.33) running OS 10.4.11. All of sudden one day the laptop would not boot. I have tried the PMU reset, taking out the memory, plugging in an external firewire drive, etc but nothing works.
The laptop just won't boot, but I know power is being transmitted as the CapsLock light works, as does the NumLock (which is oddly activated by pressing F5).
Any suggestions/ideas on what the issue can be? Is it a dead mainboard/logic board? Or DCtoDC board?
Any suggestions/help would be greatly appreciated.I found many others with the same issues.
Maybe we can read through their stories and find a solution???
http://www.pinoymac.org/forum/showthread.php?t=18510
http://forums.macosxhints.com/showthread.php?t=65275
http://www.maclife.com/forums/topic/74915
http://forums.macrumors.com/showthread.php?t=64020
http://forums.macrumors.com/showthread.php?t=110684
http://www.applefritter.com/node/18912
http://www.macintouch.com/readerreports/powerbookg4/topic2813.html#d06nov2006
http://discussions.apple.com/thread.jspa?messageID=7589764
http://discussions.apple.com/thread.jspa?threadID=733150&tstart=626
http://macosx.com/tech-support/mac/powerbook-g4-boot-problem/334350.html
http://lists.debian.org/debian-powerpc/2002/01/msg00288.html
http://www.pinoymac.org/forum/showthread.php?t=15844 -
My iMac is one year old and has worked fine but two days ago my iMac G5 (w/ iSight) started crashing and the kernel panic message comes up. So when I force restart I get to the log on screen and then the mouse freezes. Sometimes, I am able to log on but then about 5 minutes later the mouse will freeze again. This has been an endless cycle for these past two days. Luckily, I am using my iMac G4.
I tried resetting the PRAM and PMU, but it didn't work.
I tried installing the 10.4.9 combo but it didn't work either.
My computer doesn't fall under the repair extension program.
I don't know what the problem is :[Hi
I am not sure if this is where I should put this, but, looked up kernel panics - yours is the most recent one! I had one today, and had not had one for years...
So - here it goes - I'll copy and paste...
I haven’t had a kernel panic for years – but today I did.
Here’s what happened:
On the internet at the school where I work. Just had Mail open – nothing else. Went to shut down, and the panic thing showed. I pushed and held restart, and it just shut down, and did not restart.
When I got home tonight, it started, said that OSX had quit unexpectedly – and I had the choice to report or not. I clicked report, but nothing happened. So I am posting this as suggested in Mac OS X: How to Log a Kernel Panic
Thanks.
Kernel panic log from Thursday afternoon 4/12/07
Hardware Overview:
Machine Name: PowerBook G4 15"
Machine Model: PowerBook5,4
CPU Type: PowerPC G4 (1.1)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 512 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.8.6f0
Thu Apr 12 19:33:35 2007
Unresolved kernel trap(cpu 0): 0x700 - Program DAR=0x0000000020DDF05C PC=0x00000000017FFBB4
Latest crash info for cpu 0:
Exception state (sv=0x3085CA00)
PC=0x017FFBB4; MSR=0x00089030; DAR=0x20DDF05C; DSISR=0x40000000; LR=0x002D0870; R1=0x0D0BB7F0; XCP=0x0000001C (0x700 - Program)
Backtrace:
0x01939BE0 0x002D1BC0 0x007F20B0 0x007F2024 0x007E41E8 0x007E42F4
0x007E3588 0x007E0B04 0x007E0EC0 0x007E0E18 0x002BDB78 0x002CAA34 0x002BDCCC 0x002CA5BC
0x002E018C 0x0009521C 0x0002DBEC 0x0026FF64 0x0027C9A8 0x002AB7F8 0x000ABB30 0x33266C74
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleOnboardAudio(2.5.6b5)@0x7d2000
dependency: com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
dependency: com.apple.driver.AppleDBDMAAudio(2.5.6b5)@0x7a7000
dependency: com.apple.iokit.IOAudioFamily(1.5.5b2)@0x55a000
Proceeding back via exception chain:
Exception state (sv=0x3085CA00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x21192000)
PC=0x900C8520; MSR=0x0000D030; DAR=0x901FCC24; DSISR=0x40000000; LR=0x0000292C; R1=0xBFFFFEA0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0007): 0x700 - Program
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
Proceeding back via exception chain:
Exception state (sv=0x3085CA00)
PC=0x017FFBB4; MSR=0x00089030; DAR=0x20DDF05C; DSISR=0x40000000; LR=0x002D0870; R1=0x0D0BB7F0; XCP=0x0000001C (0x700 - Program)
Backtrace:
0x01939BE0 0x002D1BC0 0x007F20B0 0x007F2024 0x007E41E8 0x007E42F4
0x007E3588 0x007E0B04 0x007E0EC0 0x007E0E18 0x002BDB78 0x002CAA34 0x002BDCCC 0x002CA5BC
0x002E018C 0x0009521C 0x0002DBEC 0x0026FF64 0x0027C9A8 0x002AB7F8 0x000ABB30 0x33266C74
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleOnboardAudio(2.5.6b5)@0x7d2000
dependency: com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
dependency: com.apple.driver.AppleDBDMAAudio(2.5.6b5)@0x7a7000
dependency: com.apple.iokit.IOAudioFamily(1.5.5b2)@0x55a000
Exception state
I have updated to 10.4.9
Hoping this gets looked at by Apple or Dr Smoke...!
Thanks
powerbookG4 Mac OS X (10.4.2) -
Macbook has repeated kernel panics and freezes
Hi,
My macbook has worked quite normally up until this point. I have a macbook from late 2009/early 2010. 2 nights ago the only change I made was update the shockwave on google chrome. The following day it froze, i restarted it and then a bunch of text in the background came up and said i needed to restart ( I had my first kernel panic). I researched this found out what they were and have tried everything from single boot to safe boot but what often happens is it will freeze during the apple loading screen (havent got to log in scren) or have a kernel panic. If I let it rest for a few hours it will let me log in for upmost 10m not enough time to software update or run a disk utility I think. Sometimes when trying to turn it on I'll get three repeated beeps or one time I had a terrible noise like broken speakers or something? I have tried resetting the PRAM but not quite sure it worked... also I have a intel based mac. Any help would be great I have alot of work saved to this macbook and I have assignments which need to be completed.
ThanksHi,
My macbook has worked quite normally up until this point. I have a macbook from late 2009/early 2010. 2 nights ago the only change I made was update the shockwave on google chrome. The following day it froze, i restarted it and then a bunch of text in the background came up and said i needed to restart ( I had my first kernel panic). I researched this found out what they were and have tried everything from single boot to safe boot but what often happens is it will freeze during the apple loading screen (havent got to log in scren) or have a kernel panic. If I let it rest for a few hours it will let me log in for upmost 10m not enough time to software update or run a disk utility I think. Sometimes when trying to turn it on I'll get three repeated beeps or one time I had a terrible noise like broken speakers or something? I have tried resetting the PRAM but not quite sure it worked... also I have a intel based mac. Any help would be great I have alot of work saved to this macbook and I have assignments which need to be completed.
Thanks -
Constant Kernel Panic and Freezes
Hello. I've recently upgraded to SL on my MBP (clean install) about a month ago. It's been working flawlessly until this week, where at random times, my computer freezes up and the screen starts to flicker. When I try to restart, I get the screen that says I need to restart (kernel panic screen). Sometimes it takes multiple (as in 5 or 6) tries of restarting before I can boot up. I've tried software update, repairing permissions, resetting PRAM, etc. and nothing has seemed to work. Does anyone have any other possible solutions for me to try or any insight? Any help would be appreciated as I am a student and need my computer to be working. Thanks. Here is the log:
Interval Since Last Panic Report: 1589332 sec
Panics Since Last Report: 7
Anonymous UUID: 34BD8724-5F46-4FE5-BCB9-17E7FCCAD487
Sun Mar 21 00:58:45 2010
panic(cpu 1 caller 0x2a7ac2): Kernel trap at 0x009a925e, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000c0, CR3: 0x2055c000, CR4: 0x00000660
EAX: 0x56cfb5c0, EBX: 0x08a2f004, ECX: 0x07ed6020, EDX: 0x00000000
CR2: 0x000000c0, EBP: 0x56cfb5f8, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x009a925e, CS: 0x00000008, DS: 0x07ed0010
Error code: 0x00000000
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x56cfb388 : 0x21b2bd (0x5cf868 0x56cfb3bc 0x223719 0x0)
0x56cfb3d8 : 0x2a7ac2 (0x591c30 0x9a925e 0xe 0x591dfa)
0x56cfb4b8 : 0x29d968 (0x56cfb4d0 0x3 0x56cfb5f8 0x9a925e)
0x56cfb4c8 : 0x9a925e (0xe 0x48 0x56cf0010 0x9c0010)
0x56cfb5f8 : 0x9af6cb (0xc1d00001 0x1000000 0x1000003 0x40)
0x56cfb678 : 0x9d37bd (0x56cfb808 0x9 0x0 0x0)
0x56cfb7d8 : 0x9d53f8 (0x0 0x600d600d 0x7027 0x56cfb808)
0x56cfb8a8 : 0xb908e4 (0xc1d00001 0x1000000 0x1000003 0x40)
0x56cfb8d8 : 0xb9f110 (0x47d05000 0x1000000 0x88100090 0x3e)
0x56cfb938 : 0xba0dc6 (0x47d05000 0x1000000 0x15 0x47d0501c)
0x56cfba48 : 0x972832 (0x47d05000 0x0 0x56cfbb8a 0x80)
0x56cfbaa8 : 0x968796 (0x8a2cc00 0x0 0x56cfbb8a 0x80)
0x56cfbbd8 : 0x9657ff (0x8a2cc00 0x89d6240 0x96392a 0x8a2cc00)
0x56cfbc98 : 0x954189 (0x8a2cc00 0x959304 0x8a05d60 0x297241)
0x56cfbd08 : 0x950b98 (0x8a2cc00 0x56cfbdcc 0x846f3e8 0x213c78)
0x56cfbd38 : 0x534299 (0x8a2cc00 0x846f3e8 0x846f3e8 0x0)
0x56cfbd88 : 0x564c1c (0x8a2cc00 0x846f3e8 0x846f3e8 0x0)
0x56cfbde8 : 0x284dfd (0x8a2cc00 0x846f3e8 0x0 0x0)
0x56cfbe58 : 0x21d65f (0x8566f68 0x7eca584 0x8566f6c 0x8566fa4)
0x56cfbe98 : 0x2107f7 (0x8566f00 0x56cfbedc 0x854b8f8 0x56cfbed0)
Backtrace continues...
Kernel Extensions in backtrace (with dependencies):
com.apple.NVDAResman(6.0.6)@0x96f000->0xc21fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
com.apple.iokit.IONDRVSupport(2.0)@0x961000->0x96efff
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
com.apple.iokit.IOGraphicsFamily(2.0)@0x943000->0x960fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 29867053420
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleTyMCEDriver 1.0.1d8 - last loaded 23592048761
com.apple.filesystems.autofs 2.1.0
com.apple.driver.InternalModemSupport 2.6.0
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AudioAUUC 1.0
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.AirPort.Atheros 421.19.8
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.GeForce 6.0.6
com.apple.driver.AppleGraphicsControl 2.8.16
com.apple.driver.AppleBacklight 170.0.14
com.apple.driver.AppleLPC 1.4.9
com.apple.driver.AppleUSBTrackpad 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.driver.AppleIRController 251.1.4
com.apple.driver.CSRHIDTransitionDriver 2.2.4f3
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.AppleHDAPlatformDriver 1.7.9a4
com.apple.driver.AppleHDAHardwareConfigDriver 1.7.9a4
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.nvidia.nv50hal 6.0.6
com.apple.NVDAResman 6.0.6
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOATAFamily 2.5.0
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.8
Bluetooth: Version 2.2.4f3, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000How old is your MBP?
Some older MBPs had issues with the NVIDIA 8600M graphics chips in them going bad.
You may want to check if yours falls into the date range in question:
http://support.apple.com/kb/ts2377 -
G5 1.8GHz DP. Basically unable to run this Mac. If I try to install 10.5 Server from DVD then it gets part way through and KPs or just freezes. I have swapped memory around and have now removed the internal HD and tried OS installation on external drive. I have now managed to install 10.5 Server on an external (attached to a different Mac) and it will either KP on start up or will actually boot but after a minute or 2 it freezes - mouse moves but cannot access anything - only a hard boot will allow a restart. I've read quite a lot about similar problems with G5s but wonder if anyone has any suggestions that may help. Sometimes a KP will cause the fans to run up to full speed. As a matter of interest this Mac has been unreliable from day 1 and eventually could not be used in a commercial environment - I am trying to get it up and running without the pressures of work!
Bad RAM and dodgy peripherals are the two biggest culprits when it comes to KPs. Eventhough the AHT find nothing wrong with the RAM, a third party utility could and I would trust them over Apple in this case. For some reason the Apple test does not always catch bad RAM.
Dr. Smoke has a great FAQ on resolving KPs and the last step is reinstalling the OS, so hopefully it will be resolved by then.
One additional suggestion. Since he is still running Panther, perhaps applying the combo installer found here will help. Sometimes, the delta updates from the software update utility cause problems that are solved by applying the combo.
I would do this when applying the combo update -
1) Clone the hard drive, or at least backup all data. If you clone the drive, be sure to test it and verify that it will boot the system.
2) Download the update, but do not apply it yet.
3) Disconnect all peripherals except the KB and mouse.
4) Repair permissions.
5) Apply the update.
6) Repair permissions again.
This is the basic process that I have used for all OS updates and I have never had one go south on me yet.
Also, if you can post a panic log to see if the pros here can decode it, but my guess (hope) is that the steps above will resolve it. -
Kernel panic and possible bad hard drive? HELP!!!
I've been running my G4 iMac without any trouble for just shy of 4 years now. On Monday night I clicked on a menu on the Netflix web page and the computer crashed. I later figured out this was a full on kernel panic.
I happened to have Tuesday off so I spent my time backing up as much of my files as I could. While backing up the computer would occasionally have another kernel panic and freeze. Sometimes the screen would look like this (http://www.tallgrassrestoration.com/kernelpanic2.jpg), sometimes it would look like this (http://www.tallgrassrestoration.com/kernelpanic1.jpg). Eventually it just stopped starting up, as of now it just gives me a folding icon with a flashing question mark on it. I got all the files I really need burned onto DVDs, but there are still many files I would rather not lose.
I can boot it up from the OS 10.3 install disk, but the installer software does not recognize the hard drive, i.e. it does not list it as a location to install the operating system. The Disk tools does recognize the hard disk but comes up with a nasty error when I try to 'repair' the volume and will not proceed. The erase option looks like it would work, but I'd rather not go there... yet.
So I believe I have a hard disk issue. Because I don't hear any associated noises I am hoping its not hardware related, but rather a corruption in the sector where the system software is store.
Does anyone have any advice how I can proceed? Is there any way I can just use my wife's iBook and treat the iMac like an external hard drive and remove the last of my files that way? Any way I can repair this problem without wiping out or replacing the hard drive?
thanks,A couple of years ago I accidentally bought and installed two incompatible modules. I would get Kernel Panics 3 or 4 times a day. When I removed the factory module these KP dropped to a once every day or so. I would suggest you monitor closely for a while longer until we can be sure that both modules are good.
It's possible it was the RAM seating but I'd be more suspicious than that; you could always try re-installing it.
Most RAM comes with a lifetime warranty so even if it was some time ago it's worth contacting the reseller.
I use a magnetic screwdriver with torx bits too, but did keep it away from all the chips and boards.
Let us know how you get on.
cheers
mrtotes -
IMac will kernel panic everytime
After a 15 hr. Time Machine restore my Mac will kernel panic, even while trying to boot in safe mode. Using system disc I used disk utility to try and help, then I rebuilt with Disk Warrior but it still panics. I'm using target disk mode to backup all the data right now since I don't trust Time Machine anymore. (It's what got me into this mess.) Any advice for other diagnostics/fixes for a persistent kernel panic?
horsesbreed wrote:
No, I'm trying to boot from Snow Leopard disk.
Did you do the Restore using a Snow Leopard disc? If not, reinstall Snow Leopard and apply the "combo" update per #E8.
I was able to get a clean Apple Hardware Test out of it
It's my understanding that even the extended tests won't necessarily find everything.
Also try the (free) Rember, a heavy-duty memory tester, from: http://www.kelleycomputing.net/
Where are your backups (external HD, network), how are they connected (USB, Firewire, Ethernet, wireless), and how much data is on your system?
15 hours to do a restore might be reasonable, or might be extremely slow, depending on the circumstances. See #29 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for a very rough speed estimate.
If the restore was way longer than it should have been, it may be a symptom of something else going wrong. -
PowerBook Won't Boot Past the Apple and Spinning Flower Screen...
I've been reading a lot of these forums, but still haven't figured out how to fix it on my laptop. So, I made my own topic.
Anyways. My dad gave me this laptop since he got a new one, so it's a hand-me-down which means I don't have this startup disk that I keep seeing talked about. I've tried Safe Boot, but when I do it with Command + V, it says all sorts of things that I just don't understand, and there is a lot of talk about the Apple Power Management? Such as:
com.apple.driver.AppleIntelCPUPowerManagement isn't a valid mach-o (magic is cefaedfe)
error mapping module file com.apple.driver.AppleIntelCPUPowerManagement
can't map com.apple.driver.AppleIntelCPUPowerManagement in preparation for loading
couldn't alloc class "AppleIntelCPUPowerManagement"
Etc, etc. And then the last lines that it ends with say:
BSD root: disk0s3, major 14, minor 2
[HCIController][configurePM] power parent ready after 1 tries
And it just stays there and doesn't boot up.
I honestly don't know what any of this means, or if it is even relevant to why my PowerBook won't boot past the Apple screen. If you have any information on how I could fix it, that'd be great. Also, if you have any questions that would help you figure it out, ask away and I will answer them.
Thanks a lot.
Message was edited by: MixtapeChickMixtapeChick:
Welcome to Apple Discussions. Congratulations on your "new" PowerBook. I suggest that you begin with this combination procedure:
• Shut down the computer.
• Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
• Turn on the computer.
• Press and hold the Command + Option + P + R keys immediately after the startup chime.
• Hold keys down until you hear the startup chime for the third time.
• Release the keys and immediately hold down Shift key to start up in Safe Mode.
• Log in and empty Trash.
• Restart normally and log in.
Let us know how it goes.
cornelius -
Airport causing kernel panics and kp in safe boot.
Last week I got my first kernel panic in years. It happened while I was asleep and checking an extrenal drive for bad blocks with TechTool. It turns out that the drive indeed had bad blocks and found that the cpu was shut down when I awoke. I started up the computer and it wasn't able to stay on for more than 10 min max before the next kernel panic. I checked here for more advice on kernel panics and started to try to narrow the number of culprits. Everything was unplugged and still kp. Instaled a new drive with a week older system from Time Machine and still kp. Reset NVRAM and replaced pyhsical RAM and still kp. Removed the Airport Extreme card and still kp. Booted into Safe Mode after all of the previously mentioned and still kp. I'm now going to take the drive and swap it into another body that I have to see if the root is actually on the drive on the physical hardware of the cpu.
I was interested in this thread and read all of the links that jpl posted. Airport causing Kernel Panic (?) Jason then replied that it had been solved due to a "permissions problem" I wish he gave more info on what exactly he did to resolve the problem as it's been almost a week now without any work being done for me.
I've also noticed this very strange behavior that might shed some light onto the issue. When I open System Prefs and close the window there is a strange colored pattern that will always flash after the window has been closed. I tried to post it to my me page but for somereason it wouldn't play for me so there's that and the YouTube version too.
https://www.me.com/gallery/#100008/Prefs%20Screen
http://www.youtube.com/watch?v=2zrTt88YdBo
In addition when the computer has started up and the system loads. Checking Activity Monitor shows that there are 50 or more threads active for the the kernel_task. Inspecting this doesn't seem to show any useful information.
Finally here are a few of the recent crashes I hope that someone might be able to shed some light on this extremely frustrating problem for me.
Tue Oct 25 18:54:16 2011
panic(cpu 0 caller 0x000AE584): "Uncorrectable machine check: pc = 00000000000A388C, msr = 0000000000141000, dsisr = 42000000, dar = 0000000000272008\n" " AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000\n" " L2FIR = 0000000000000000, BusFir = 0000000080000000\n"@/SourceCache/xnu/xnu-1228/osfmk/ppc/trap.c:975
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AE584 0x000AE804 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x2fc12c80)
PC=0x000A388C; MSR=0x00141000; DAR=0x00272008; DSISR=0x42000000; LR=0x000A37C8; R1=0x2E947B40; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x00000000 0x000A09C8 0x0009E2EC 0x0006B3C0 0x0006C728 0x0003BE1C
0x0029361C 0x0029364C 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x249dba00)
PC=0x9195435C; MSR=0x0000F030; DAR=0x00272000; DSISR=0x42000000; LR=0x00001FA8; R1=0xBFFFFB00; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: PubSubAgent
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
Tue Oct 25 19:09:54 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000FFFFFFFF PC=0x0000000000040DE4
Latest crash info for cpu 0:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): copyin/out has no recovery point
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEB88 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Wed Oct 26 15:31:02 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000FFFFFFFF PC=0x0000000000040DE4
Latest crash info for cpu 0:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): copyin/out has no recovery point
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEB88 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Wed Oct 26 22:17:42 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000010 PC=0x0000000000082EF8
Latest crash info for cpu 0:
Exception state (sv=0x2514ea00)
PC=0x00082EF8; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00082ECC; R1=0x24F6BB60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718
0x0006C728 0x00296378 0x0030924C 0x000B24C8 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x2514ea00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2509d500)
PC=0x9194AF64; MSR=0x0000D930; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE9A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEA90 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x2514ea00)
PC=0x00082EF8; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00082ECC; R1=0x24F6BB60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718
0x0006C728 0x00296378 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x2509d500)
PC=0x9194AF64; MSR=0x0000D930; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE9A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Thu Oct 27 11:28:35 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000004 PC=0x00000000000848E0
Latest crash info for cpu 0:
Exception state (sv=0x248ff500)
PC=0x000848E0; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x000848AC; R1=0x30063BB0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718 0x0006C728
0x00296378 0x0030924C 0x000B24C8 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x248ff500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x248fd280)
PC=0x9194AF64; MSR=0x0000D030; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE7F0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEA90 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x248ff500)
PC=0x000848E0; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x000848AC; R1=0x30063BB0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718 0x0006C728
0x00296378 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x248fd280)
PC=0x9194AF64; MSR=0x0000D030; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE7F0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Thanks in advance,
MaxMy vision is pretty poor, still cant see it, but...
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process. -
A Kernel Panic and two Crashes since updating to 10.8.1
I've been running a 15" MacBook Pro (Mid 2009) for about a year and a half. It's factory stock (no hardware modifications) with a 2.8 Core 2 Duo processor and 4gig RAM with a 500GB HD. It came with 10.5 installed. I upgraded to 10.6, 10.7 & 10.8 respectively. Each time a new operating system came out, I did a clean install. My system has been 100% reliable up until I installed the 10.8.1 update. Since then, I've had a Kernel Panic and two separate crashes.
I doubt it's a hardware issue as it's never been suspect before. Also, I've run Disk Utility and verified the disk and permissions. No Problems there.
The first problem was the Kernel Panic, which occurred while I was in the guest account watching YouTube videos. The system went to a gray screen then gave me the typical "Panic" message and rebooted itself.
The second problem must have occurred while the computer was in sleep mode, as I don't recall any particular issue, but I found a CRASH log in the logs folder.
Finally, I encountered the most recent crash while I was exiting out of the ADMIN account on my computer. The system went to a gray screen with a rotating bezel indicator, and wouldn't return to the log-in screen. I had to manually cycle the power button in order for the computer to reboot.
I'm not sure what's going on.Hi. Since updating to 10.8 I've had numerous kernel panics on start-up. A restart always worked successfully, but it's getting annoying. I started out by replacing the HD with an SSD. That didn't work. Then I resent the PRAM/NVRAM. That seemed to work. Then I upgraded to 10.8.1 - and we're back to kernel panics.
Here's the log, and below it are photos of the initial kernel panic. :
29/08/2012 10:30:58.000 bootlog[0]: BOOT_TIME 1346232658 0
29/08/2012 10:31:00.000 kernel[0]: Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
29/08/2012 10:31:00.000 kernel[0]: vm_page_bootstrap: 859948 free pages and 114900 wired pages
29/08/2012 10:31:00.000 kernel[0]: kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000]
29/08/2012 10:31:00.000 kernel[0]: zone leak detection enabled
29/08/2012 10:31:00.000 kernel[0]: standard timeslicing quantum is 10000 us
29/08/2012 10:31:00.000 kernel[0]: standard background quantum is 2500 us
29/08/2012 10:31:00.000 kernel[0]: mig_table_max_displ = 74
29/08/2012 10:31:00.000 kernel[0]: corecrypto kext started!
29/08/2012 10:31:00.000 kernel[0]: Running kernel space in FIPS MODE
29/08/2012 10:31:00.000 kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
29/08/2012 10:31:00.000 kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS integrity POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS SHA POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS POST passed!
29/08/2012 10:31:00.000 kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
29/08/2012 10:31:00.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
29/08/2012 10:31:00.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
29/08/2012 10:31:00.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
29/08/2012 10:31:00.000 kernel[0]: calling mpo_policy_init for Sandbox
29/08/2012 10:31:00.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
29/08/2012 10:31:00.000 kernel[0]: calling mpo_policy_init for Quarantine
29/08/2012 10:31:00.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
29/08/2012 10:31:00.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
29/08/2012 10:31:00.000 kernel[0]: The Regents of the University of California. All rights reserved.
29/08/2012 10:31:00.000 kernel[0]: MAC Framework successfully initialized
29/08/2012 10:31:00.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
29/08/2012 10:31:00.000 kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
29/08/2012 10:31:00.000 kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
29/08/2012 10:31:00.000 kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
29/08/2012 10:31:00.000 kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
29/08/2012 10:31:00.000 kernel[0]: [ PCI configuration begin ]
29/08/2012 10:31:00.000 kernel[0]: console relocated to 0xf10010000
29/08/2012 10:31:00.000 kernel[0]: PCI configuration changed (bridge=2 device=1 cardbus=0)
29/08/2012 10:31:00.000 kernel[0]: [ PCI configuration end, bridges 5 devices 18 ]
29/08/2012 10:31:00.000 kernel[0]: NVEthernet::start - Built Jun 25 2012 17:20:40
29/08/2012 10:31:00.000 kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
29/08/2012 10:31:00.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
29/08/2012 10:31:00.000 kernel[0]: rooting via boot-uuid from /chosen:
29/08/2012 10:31:00.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
29/08/2012 10:31:00.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
29/08/2012 10:31:00.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/M4-CT512M4SSD2 Media/IOGUIDPartitionScheme/Aidan's SSD@2
29/08/2012 10:31:00.000 kernel[0]: BSD root: disk0s2, major 1, minor 2
29/08/2012 10:31:00.000 kernel[0]: Kernel is LP64
29/08/2012 10:31:00.000 kernel[0]: BTCOEXIST off
29/08/2012 10:31:00.000 kernel[0]: BRCM tunables:
29/08/2012 10:31:00.000 kernel[0]: pullmode[1] txringsize[ 256] reapmin[ 32] reapcount[ 128]
29/08/2012 10:31:00.000 kernel[0]: highWaterMark: VO[ 192] VI[ 192] BE[ 192] BK[ 192]
29/08/2012 10:31:00.000 kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID d49a20fffefbdb82; max speed s800.
29/08/2012 10:31:00.000 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
29/08/2012 10:30:58.141 com.apple.launchd[1]: *** launchd[1] has started up. ***
29/08/2012 10:30:58.141 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
29/08/2012 10:30:59.971 com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
29/08/2012 10:31:00.000 kernel[0]: NVEthernet: Ethernet address d4:9a:20:fb:db:82
29/08/2012 10:31:00.000 kernel[0]: AirPort_Brcm4331: Ethernet address 00:23:6c:96:cc:0e
29/08/2012 10:31:00.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
29/08/2012 10:31:00.000 kernel[0]: IO80211Interface::efiNVRAMPublished():
29/08/2012 10:31:01.891 airportd[27]: _processDLILEvent: en1 attached (down)
29/08/2012 10:31:02.000 kernel[0]: createVirtIf(): ifRole = 1
29/08/2012 10:31:02.000 kernel[0]: in func createVirtualInterface ifRole = 1
29/08/2012 10:31:02.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff802049dc00
29/08/2012 10:31:02.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
29/08/2012 10:31:02.000 kernel[0]: Created virtif 0xffffff802049dc00 p2p0
29/08/2012 10:31:02.229 com.apple.SecurityServer[17]: Session 100000 created
29/08/2012 10:31:02.000 kernel[0]: NVDANV50HAL loaded and registered.
29/08/2012 10:31:02.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
29/08/2012 10:31:02.000 kernel[0]: IOBluetoothUSBDFU::probe
29/08/2012 10:31:02.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
29/08/2012 10:31:02.000 kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
29/08/2012 10:31:02.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
29/08/2012 10:31:02.000 kernel[0]: Previous Shutdown Cause: 3
29/08/2012 10:31:02.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
29/08/2012 10:31:02.282 com.apple.SecurityServer[17]: Entering service
29/08/2012 10:31:02.383 UserEventAgent[13]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
29/08/2012 10:31:02.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
29/08/2012 10:31:02.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
29/08/2012 10:31:03.000 kernel[0]: DSMOS has arrived
29/08/2012 10:31:03.000 kernel[0]: macx_swapon SUCCESS
29/08/2012 10:31:03.051 hidd[56]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
29/08/2012 10:31:03.075 appleeventsd[61]: main: Starting up
29/08/2012 10:31:03.105 mDNSResponder[49]: mDNSResponder mDNSResponder-379.27.1 (Aug 1 2012 20:12:04) starting OSXVers 12
29/08/2012 10:31:03.176 configd[19]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
29/08/2012 10:31:03.177 configd[19]: DHCP en1: INIT transmit failed
29/08/2012 10:31:03.202 loginwindow[52]: Login Window Application Started
29/08/2012 10:31:03.279 awacsd[65]: Starting awacsd connectivity-77 (Jun 20 2012 15:40:49)
29/08/2012 10:31:03.000 kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active
29/08/2012 10:31:03.341 awacsd[65]: InnerStore CopyAllZones: no info in Dynamic Store
29/08/2012 10:31:03.363 mDNSResponder[49]: D2D_IPC: Loaded
29/08/2012 10:31:03.363 mDNSResponder[49]: D2DInitialize succeeded
29/08/2012 10:31:03.530 com.apple.usbmuxd[37]: usbmuxd-268.5 on Apr 5 2012 at 15:33:48, running 64 bit
29/08/2012 10:31:03.551 configd[19]: network changed: DNS*
29/08/2012 10:31:03.441 systemkeychain[70]: done file: /var/run/systemkeychaincheck.done
29/08/2012 10:31:03.563 configd[19]: setting hostname to "Aidan-Byrnes-Computer.local"
29/08/2012 10:31:03.646 locationd[53]: NOTICE,Location icon should now be in state 0
29/08/2012 10:31:03.674 mds[48]: (Normal) FMW: FMW 0 0
29/08/2012 10:31:03.676 WindowServer[86]: Server is starting up
29/08/2012 10:31:03.680 WindowServer[86]: Session 256 retained (2 references)
29/08/2012 10:31:03.680 WindowServer[86]: Session 256 released (1 references)
29/08/2012 10:31:03.703 WindowServer[86]: Session 256 retained (2 references)
29/08/2012 10:31:03.705 WindowServer[86]: init_page_flip: page flip mode is on
29/08/2012 10:31:03.779 coreservicesd[29]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
29/08/2012 10:31:03.881 apsd[67]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29/08/2012 10:31:03.882 apsd[67]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29/08/2012 10:31:04.048 netbiosd[72]: Unable to start NetBIOS name service:
29/08/2012 10:31:04.249 WindowServer[86]: mux_initialize: Couldn't find any matches
29/08/2012 10:31:04.276 WindowServer[86]: GLCompositor enabled for tile size [256 x 256]
29/08/2012 10:31:04.276 WindowServer[86]: CGXGLInitMipMap: mip map mode is on
29/08/2012 10:31:04.311 WindowServer[86]: WSMachineUsesNewStyleMirroring: false
29/08/2012 10:31:04.312 WindowServer[86]: Display 0x04272240: GL mask 0x1; bounds (0, 0)[1280 x 800], 30 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c89, S/N 0, Unit 0, Rotation 0
UUID
29/08/2012 10:31:04.312 WindowServer[86]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
29/08/2012 10:31:04.323 WindowServer[86]: Created shield window 0x5 for display 0x04272240
29/08/2012 10:31:04.324 WindowServer[86]: Created shield window 0x6 for display 0x003f003d
29/08/2012 10:31:04.331 WindowServer[86]: Display 0x04272240: GL mask 0x1; bounds (0, 0)[1280 x 800], 30 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c89, S/N 0, Unit 0, Rotation 0
UUID
29/08/2012 10:31:04.331 WindowServer[86]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
29/08/2012 10:31:04.331 WindowServer[86]: CGXPerformInitialDisplayConfiguration
29/08/2012 10:31:04.331 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; Vendor 0x610 Model 0x9c89 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
29/08/2012 10:31:04.331 WindowServer[86]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
29/08/2012 10:31:04.000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,0000,0de1,0005,41e1,0000]
29/08/2012 10:31:04.000 kernel[0]: 05f5e100 00100026 NVEthernet::setLinkStatus - Active
29/08/2012 10:31:04.000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,0000,0de1,0005,41e1,0000]
29/08/2012 10:31:04.000 kernel[0]: 05f5e100 00100026 NVEthernet::setLinkStatus - Active
29/08/2012 10:31:04.449 WindowServer[86]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, accelerator 0x00003863, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
29/08/2012 10:31:04.452 WindowServer[86]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
29/08/2012 10:31:04.456 loginwindow[52]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
29/08/2012 10:31:04.469 hidd[56]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
29/08/2012 10:31:04.517 WindowServer[86]: Unable to open IOHIDSystem (e00002bd)
29/08/2012 10:31:04.000 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
29/08/2012 10:31:04.608 WindowServer[86]: Created shield window 0x7 for display 0x04272240
29/08/2012 10:31:04.608 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
29/08/2012 10:31:04.662 com.apple.launchd[1]: (name.razzfazz.daemon.iScroll2[104]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
29/08/2012 10:31:04.662 com.apple.launchd[1]: (name.razzfazz.daemon.iScroll2[104]) Job failed to exec(3) for weird reason: 2
29/08/2012 10:31:04.668 launchctl[97]: com.apple.findmymacmessenger: Already loaded
29/08/2012 10:31:04.730 com.apple.SecurityServer[17]: Session 100005 created
29/08/2012 10:31:04.770 hidd[56]: CGSShutdownServerConnections: Detaching application from window server
29/08/2012 10:31:04.770 hidd[56]: CGSDisplayServerShutdown: Detaching display subsystem from window server
29/08/2012 10:31:04.834 loginwindow[52]: Login Window Started Security Agent
29/08/2012 10:31:04.950 SecurityAgent[107]: This is the first run
29/08/2012 10:31:04.950 SecurityAgent[107]: MacBuddy was run = 0
29/08/2012 10:31:05.015 SecurityAgent[107]: User info context values set for aidanbyrne
29/08/2012 10:31:05.300 configd[19]: network changed: v4(en0+:134.220.228.104) DNS+ Proxy+ SMB
29/08/2012 10:31:05.331 root[114]: sntp sendpkt: sendto error: No route to host. Couldn't send packet!
29/08/2012 10:31:05.331 root[114]: on_wire failed for server 0.0.0.17!
29/08/2012 10:31:05.349 ntpd[34]: proto: precision = 1.000 usec
29/08/2012 10:31:05.493 loginwindow[52]: Login Window - Returned from Security Agent
29/08/2012 10:31:05.000 kernel[0]: [ffffff8021495800][BNBTrackpadDevice::init][75.15] init is complete
29/08/2012 10:31:05.522 loginwindow[52]: USER_PROCESS: 52 console
29/08/2012 10:31:05.604 com.apple.launchd.peruser.501[115]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
29/08/2012 10:31:05.609 loginwindow[52]: Connection with distnoted server was invalidated
29/08/2012 10:31:05.633 distnoted[118]: # distnote server agent absolute time: 7.965250809 civil time: Wed Aug 29 10:31:05 2012 pid: 118 uid: 501 root: no
29/08/2012 10:31:05.791 WindowServer[86]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
29/08/2012 10:31:05.808 com.apple.SecurityServer[17]: Session 100006 created
29/08/2012 10:31:06.000 kernel[0]: [ffffff8021495800][BNBTrackpadDevice::handleStart][75.15] returning 1
29/08/2012 10:31:06.000 kernel[0]: [ffffff8021601c00][AppleMultitouchHIDEventDriver::start] entered
29/08/2012 10:31:06.000 kernel[0]: [ffffff80216af100][AppleMultitouchDevice::start] entered
29/08/2012 10:31:06.014 talagent[128]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:06.188 SystemUIServer[129]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:06.217 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
29/08/2012 10:31:06.323 configd[19]: setting hostname to "wxp-itr11564.unv.wlv.ac.uk"
29/08/2012 10:31:06.324 WindowServer[86]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
29/08/2012 10:31:06.888 NetworkBrowserAgent[139]: Starting NetworkBrowserAgent
29/08/2012 10:31:07.016 Finder[130]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:07.142 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
29/08/2012 10:31:07.423 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2[157]) Exited with code: 2
29/08/2012 10:31:07.423 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2) Throttling respawn: Will start in 10 seconds
29/08/2012 10:31:07.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=159[GoogleSoftwareUp] clearing CS_VALID
29/08/2012 10:31:07.527 loginwindow[52]: Login items - LSOpenApplication returned error -10665, url=/Library/CFMSupport/CNQL1212_ButtonManager.app
29/08/2012 10:31:07.527 loginwindow[52]: Unable to lauch startup item: (null)
29/08/2012 10:31:07.533 com.apple.launchd.peruser.501[115]: (com.apple.afpstat-qfa[156]) Exited with code: 2
29/08/2012 10:31:07.742 Folder Actions Dispatcher[160]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:07.788 loginwindow[52]: Login items - LSOpenApplication returned error -10665, url=/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app
29/08/2012 10:31:07.788 loginwindow[52]: Unable to lauch startup item: (null)
29/08/2012 10:31:07.892 System Events[166]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:08.135 NotificationCenter[146]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:08.413 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
29/08/2012 10:31:08.506 coreaudiod[106]: 2012-08-29 10:31:08.505832 AM [AirPlay] Started browsing for _airplay._tcp.
29/08/2012 10:31:08.507 coreaudiod[106]: 2012-08-29 10:31:08.507315 AM [AirPlay] Started browsing for _raop._tcp.
29/08/2012 10:31:08.678 TISwitcher[168]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:08.736 com.apple.dock.extra[165]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:08.762 coreservicesd[29]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=129
29/08/2012 10:31:09.026 GoogleSoftwareUpdateAgent[159]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:09.102 SystemUIServer[129]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
29/08/2012 10:31:09.102 SystemUIServer[129]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
29/08/2012 10:31:08.046 CCAAgent[163]: ****************************************
29/08/2012 10:31:08.047 CCAAgent[163]: ** CCA agent starts! **
29/08/2012 10:31:08.047 CCAAgent[163]: ****************************************
29/08/2012 10:31:08.294 CCAAgent[163]: CCAAgent Logfiles: (/Users/aidanbyrne/Library/Application Support/Cisco Systems/CCAAgent/event.log) (/Users/aidanbyrne/Library/Application Support/Cisco Systems/CCAAgent/eventPrevious.log)
29/08/2012 10:31:08.458 DictationIM[178]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:08.844 BezelServices 235.55[52]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
29/08/2012 10:31:09.170 CCAAgent[163]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:09.292 blued[64]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
29/08/2012 10:31:09.415 locationd[187]: NOTICE,Location icon should now be in state 0
29/08/2012 10:31:09.467 UserEventAgent[142]: cannot find fw daemon port 1102
29/08/2012 10:31:10.036 CoreLocationAgent[189]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:11.013 Dropbox[167]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:11.424 CalendarAgent[153]: -[SOAPParser:0x7fb0d8c971e0 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in SOAPDocument for html (html)
29/08/2012 10:31:11.431 LKDCHelper[198]: Starting (uid=501)
29/08/2012 10:31:11.458 CalendarAgent[153]: -[SOAPParser:0x7fb0d98b3560 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in SOAPDocument for html (html)
29/08/2012 10:31:11.459 CalendarAgent[153]: [com.apple.calendar.store.log.exchange.queue] [error = Error Domain=CalExchangeErrorDomain Code=-2 "Calendar can’t refresh the account “wlv.ac.uk”." UserInfo=0x7fb0d8c98230 {NSLocalizedFailureReason=The primary email address for the account can’t be found., CalFailedOperationKey=<CalExchangeSyncAccountOperation: 0x7fb0d9897830>, NSLocalizedDescription=Calendar can’t refresh the account “wlv.ac.uk”.}]
29/08/2012 10:31:11.495 CalendarAgent[153]: -[SOAPParser:0x7fb0d98f9e70 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in SOAPDocument for html (html)
29/08/2012 10:31:11.498 CalendarAgent[153]: [com.apple.calendar.store.log.exchange.queue] [error = Error Domain=CalExchangeErrorDomain Code=-2 "Calendar can’t refresh the account “wlv.ac.uk”." UserInfo=0x7fb0d8cea360 {NSLocalizedFailureReason=The primary email address for the account can’t be found., CalFailedOperationKey=<CalExchangeSyncAccountOperation: 0x7fb0d9897830>, NSLocalizedDescription=Calendar can’t refresh the account “wlv.ac.uk”.}]
29/08/2012 10:31:14.284 Image Capture Extension[214]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:14.316 CIJScannerRegister[215]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:15.303 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2[218]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
29/08/2012 10:31:15.303 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2[218]) Job failed to exec(3) for weird reason: 2
29/08/2012 10:31:16.224 awacsd[65]: Exiting
29/08/2012 10:31:23.456 com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[103]) Exit timeout elapsed (20 seconds). Killing
29/08/2012 10:31:31.525 com.apple.SecurityServer[17]: Session 100002 created
29/08/2012 10:31:36.000 kernel[0]: Sandbox: sandboxd(232) deny mach-lookup com.apple.coresymbolicationd
29/08/2012 10:31:37.404 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-data /Library/Audio/Plug-Ins/Components/CamelCrusher.component
29/08/2012 10:31:37.409 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelCrusher.component/Contents
29/08/2012 10:31:37.414 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelCrusher.component
29/08/2012 10:31:37.419 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-data /Library/Audio/Plug-Ins/Components/CamelPhat.component
29/08/2012 10:31:37.424 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelPhat.component/Contents
29/08/2012 10:31:37.428 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelPhat.component
29/08/2012 10:31:37.433 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-data /Library/Audio/Plug-Ins/Components/CamelSpace.component
29/08/2012 10:31:37.438 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelSpace.component/Contents
29/08/2012 10:31:37.442 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelSpace.component
29/08/2012 10:31:47.300 Safari[242]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:47.327 WebProcess[244]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:31:50.474 PluginProcess[247]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:32:03.134 Safari[242]: CGContextClipToRect: invalid context 0x0
29/08/2012 10:32:03.539 WebProcess[250]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:38:22.299 Dock[127]: no information back from LS about running process
29/08/2012 10:38:22.373 Console[341]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
29/08/2012 10:41:22.416 com.apple.launchd.peruser.501[115]: (com.apple.KerberosHelper.LKDCHelper[198]) Exited with code: 1 -
2.1ghz iMac Kernel Panics and no CD startup
Just got my Refurb iMac G5. Its 2.1ghz, the iSight model. I chose the Apple Certified Refurb because I work alot with Adobe Creative suite and heard that it wouldnt be UB for at least 2 years by which time I will have a new system.
Anyhow, I bought a 1gb Samsung memory stick from OWC and have been getting Kernel Panics(6 in the last two days). Funny thing is, even when I removed the memory stick I still get the KP's. Secondly, my iMac will not strtup from the Applecare CD. I just get the gray screen with the circle slash through it.
Back to the memory, I ran Disk Utility while booted from the startup disk and it showed a catalog error which Disk Utility could not repair, even when booted from the OSX install DVD. During this time period some crazy stuff was happenning, the computer would NOT startup at all, from strtup disk or cd drive. It wouldget to the Apple logo with the progress spinner under it and then just go black and shut off. It did this probably 15 out of 20 times during an hour. I then got it to finally start up by booting into the black screen with white type (forget hat it is called, single user or verbose or safe...?) ran fsck -f, which showed the same catalog error as before and said it still couldn't fix it. Finally got it to start up; So, I backed up all my files and zeroed out the whole 250gb drive and reinstalled OSX, ran all the Software Updates to get to 10.4.7 and am still getting Kernel Panics, and it still wont start up from the AppleCare cd.
My questions are:
I thought Samsung memory was Apple approved, what should I put in this iMac?
Is there a known issue with 10.4.7 and iMac G5's with KP's?
BTW, I ran Apple hardware test( the LONG one) and everything passed, even the RAM.
Disk Utility now shows a verified and "ok" drive when I test it now; yet still I get KP's
Thanks for any help, sorry for the long post but I wanted to assure clarity in my situation.
offtopic- When I tried to enroll my iMac for my Apple care it told me I need to call Apple, any idea why? I bought the iMac and the Applecare on the same invoice.Hi swizcore, welcome to Discussions. Do you have any USB or Firewire devices connected to your Imac? These can sometime cause problem start ups. Try if possible to disconnect all but the USB keyboard and mouse and restart.
As for memory most brands of RAM will work, more important is it the correct RAM for your Imac. The fact that you removed it and all that was in the Imac was apple (Hardwired RAM I beleive with iSights) I don't think it would be the problem YET
I would definately be getting a hold of Apple ASAP this should not be happening and at the same time you can get the Apple care registered.
Good luck and post back with results or if they don't find the problem. Bob :~))
Imac G5 Rev B 20 Mac OS X (10.4.6) -
IMac G4 800MHz - Kernel Panics and Blank Screen At Startup
Two days ago, I was listening to iTunes, just browsing the internet, and suddenly I got a kernel panic. Yesterday, the exact same thing happened. After that, I got frustrated and just left it alone until today. When I attempted to turn on my iMac G4 800 MHz today, the screen does not turn on and the mouse does not even receive power. The only thing that appears to receive power is the power LED on the display.
I experimented with it for a few minutes and found that if I unplug the power cord for a few minutes, plug it back in, and turn the computer back on, the screen will turn on. However, as soon as I log in, I get another kernel panic, and it goes back to the screen not turning on.
Any suggestions?::UPDATE::
Okay, I eventually got my iMac to start up successfully, without crashing after logging in. But I still thought there was something wrong so I booted from the Apple Hardware Test CD that came with my computer and I got yet ANOTHER Kernel Panic! Here is what it said:
Kernel Panic Message:
DEFAULT CATCH!, code=300 at %SRR0: 000352d4 %SRR1: 00003030
Apple PowerMac4,2 4.3.5f1 BootROM built on 03/16/02 at 21:45:18
Copyright 1994-2002 Apple Computer, Inc.
All Ri
DEFAULT CATCH!, code=300 at %SRR0: ff84750c %SSR1: 0000b030
ok
0>
DEFAULT CATCH!, code=300 at SSR0: ff84750c %SSR1:_
This message appeared soon after it began testing the memory. The result of the test were as follows:
Test Results:
Airport Passed
Logic Board Passed
Mass Storage Passed
Memory In Progress
Modem Device Found
Video RAM Has not been run yet
And now it is back to not booting up at all!
Does anyone have any suggestions based on the new kernel panic message?
Thank you for your help.
Message was edited by: rrm74001
Maybe you are looking for
-
S_ALR_87012178 Report -Issue Related to Interest calculations
Hi, When we run a customer open item analysis S_ALR-87012178 we see that there looks to be interest for overdue balances showing on the report. It doesn't appear to be assigning the interst to the customer, but I wanted to see why this was here and
-
In a JSP how can access an XML where the XML is present in JAR file in the
All, The Requirement is as below, I have a JSP LaunchMe.jsp, and I have a jar utils.jar. both are present in my deployable war file. And I have an XML Details.XML present in the utils.jar file. Here I want to access Details.xml in the LaunchMe.jsp. C
-
I am planning to give my Mac Pro (Mid 2010) another RAM upgrade. As the official Kingston/Crucial DIMMs do not include 16GB DIMMs, I think of choosing Kingston Value RAM: ECC Registered (3x, 16GB, DDR3-1600, DIMM 240). Has anyone here in the forum tr
-
I downloaded a book as a pdf in an app through iTunes, but I want to read it on my MacBook Air. How do I do that, please?
-
Question Regarding upgrading weblogic server from 10.3.5 to 10.3.6 in OBIEE
Here is what was done. 1) Create a 11.2.0.3 database and create the repositories required from Enterprise BI Install 2) Install OBIEE 11.1.1.6.0. The option chosen was 'Enterprise Install' which installed and configured the domain and the instance 3)