PowerBook Won't Boot Past the Apple and Spinning Flower Screen...

I've been reading a lot of these forums, but still haven't figured out how to fix it on my laptop. So, I made my own topic.
Anyways. My dad gave me this laptop since he got a new one, so it's a hand-me-down which means I don't have this startup disk that I keep seeing talked about. I've tried Safe Boot, but when I do it with Command + V, it says all sorts of things that I just don't understand, and there is a lot of talk about the Apple Power Management? Such as:
com.apple.driver.AppleIntelCPUPowerManagement isn't a valid mach-o (magic is cefaedfe)
error mapping module file com.apple.driver.AppleIntelCPUPowerManagement
can't map com.apple.driver.AppleIntelCPUPowerManagement in preparation for loading
couldn't alloc class "AppleIntelCPUPowerManagement"
Etc, etc. And then the last lines that it ends with say:
BSD root: disk0s3, major 14, minor 2
[HCIController][configurePM] power parent ready after 1 tries
And it just stays there and doesn't boot up.
I honestly don't know what any of this means, or if it is even relevant to why my PowerBook won't boot past the Apple screen. If you have any information on how I could fix it, that'd be great. Also, if you have any questions that would help you figure it out, ask away and I will answer them.
Thanks a lot.
Message was edited by: MixtapeChick

MixtapeChick:
Welcome to Apple Discussions. Congratulations on your "new" PowerBook. I suggest that you begin with this combination procedure:
• Shut down the computer.
• Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
• Turn on the computer.
• Press and hold the Command + Option + P + R keys immediately after the startup chime.
• Hold keys down until you hear the startup chime for the third time.
• Release the keys and immediately hold down Shift key to start up in Safe Mode.
• Log in and empty Trash.
• Restart normally and log in.
Let us know how it goes.
cornelius

Similar Messages

My iMac will not boot past the logo and spinning gear

My iMac will not boot past the logo and spinning gear (After a Rogue Amoeba update). I can't access the recovery disk I made on a flash drive. (Am I doing it correctly? - Hold down option while switching on? It just stays on the logo). What (if anything) can I do please?

If you installed Lion onto your machine, it should have created a Recovery HD (hidden from view, but visible in Disk Utility with its Debug menu enabled, under Show all Partitions).
That article states:
Note: In order to create an external Lion Recovery using the Lion Recovery Assistant, the Mac must have an existing Recovery HD.
Would I see the recovery menu (by holding down option on power up)
Yes.
if there was no recovery disc connected do you think?
Shouldn't matter, since your int HD is always connected.

Reset PMU and Powerbook won't boot past the blue screen with "Mac OSX" box

Hi-
Problem: I tried to reset my PMU, and now when my computer restarts it won't go past the blue screen with the "Mac OSX" logo in the box (and progress bar, that never fills up). I then also tried to reset PRAM, but it still won't boot properly.
Backstory--
I've had my 12-inch Powerbook G4 for about 3.5 years already, so things are starting to get a bit out of whack. I replaced my battery about 3 months ago, which has been great, but recently my power-cord has been wonky (having to unplug it and replug it in to make sure it actually charges the computer, the light flickers on and off, etc). Today it actually started producing SPARKS at the place where the thin white wire meets the white plastic power brick, so I decided it was time to get a new one. Brought it home, plugged it in, and since it seemed like the battery indication icon on the menu bar was all out of sync with the powercord colored-light, I tried restarting it a few times, but still the same. Then, I decided to reset the PMU, which may have been a huge mistake. And now it won't boot past the blue screen... Any advice? I'm going to try restarting it in "safe" mode, but I'd be so grateful for any recommendations. Hope I haven't done something irreversibly stupid with the PMU reset.
Thanks,
Samantha

Hello all,
Thanks for all of your great suggestions and info-- here are a few responses.
1) The disk I just borrowed from my friend appears to be the full retail version-- it looks just like the links that Ali B sent, and is in a large box saying "Mac OSX Tiger, version 10.4"... will this be the proper disk to do an Erase and Install? The only other disks I have came with my Powerbook when it was originally purchased, when it came Panther (I think, 10.3?). Would I use both sets of these disks to do erase and install? Or only the Tiger OSX disks?
2) I get the sense that Disk Warrior or Tech Tool might be necessary, but does it make sense to TRY to do erase-install before buying them? Also, are there any downloadable (for pay) versions of this, or would I need to track down the actual physical disks in Hong Kong or wait for them to be shipped?
3) I haven't yet tried the S.M.A.R.T. test, should I do that first? What is the procedure? Are there any results or ways to know if the drive is too far gone (so that I might instead replace the internal hard-drive) instead of pay 100 USD first to do the disk repair?
4) Cornelius said: "An alternative would be to completely reformat and erase the entire HDD, then re-install and restore your data from backup. If your backup is in the form of a bootable clone of the entire HDD, you can just clone it back." I use Super-Duper to back-up and the most recent one copied the whole thing-- what would be the later procedure of "cloning it back"?
5) As I'm able to use my computer pretty normally right now, but does it still mean that it might crash/die at any moment? Is there any way to tell?
Thanks so much!

MacBook won't boot past the apple logo screen!

So my MacBook started freezing up and I went to restart it and it wouldn't boot past the grey logo screen with the spinning gear. Its pretty old and therefor still has the Leopard operating system. I've been trying to run Disk Repair using a Snow Leopard install disc but it just gets about 30% done and then doesn't go any further. Eventually I stopped the disk repair and just tried installing OSX but when it asks me what drive I want to install on there are no options available to click. I've got alot of unsaved work on this old thing and would love to get it running soon! Any help would be extremely appreciated! Thanks

I've been trying to run Disk Repair using a Snow Leopard install disc
Install discs are "machine specific" .. you can only use the install disc that came with the Mac for repairing the hard disk.
You may not have enough free space on the startup disk.
Follow the directions for starting up in Safe Mode
A Safe Mode boot can take a little longer then a normal boot so be patient.
When you see the Desktop, right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
If there isn't enough free space, help here > Freeing space on your Mac OS X startup disk
You can use Disk Utility to verify the startup disk from Safe Mode but you can't repair the disk. You will need the install disc that came with your MacBook for that. While you have Disk Utillity open check S.M.A.R.T. status at the bottom of the window. Make sure it says: Verified
When you are finished, click the Apple menu icon top left in the screen. From the drop down menu click Restart.
If you don't have the original install discs you may be able to request a replacement. You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.

Won't boot past the Apple logo...

I have an '07 MacBook that was upgraded to Snow Leopard about 6 months ago. I've had it for about 3.5 years with no problems-- until now. Last night I turned it on and it booted fine. However, once it had booted, the spinning pinwheel would not go away when I was on "Finder". Despite this, Firefox loaded up fine. But I didn't want to do stuff on the computer when I knew something wasn't right. I tried to restart it, but it wouldn't shut down, so I was forced to cut it off with the power button. When i tried to turn it back on, it wouldn't get passed the white screen with the Apple logo and the little spinning load signal. Along with that, a load bar that I have never seen on that page before began to load up, but it disappeared after filling up to about 10%. I let it sit for a while before turning it off and trying again. By this point I was freaking out, because I have some valuable documents/files that I haven't backed up yet that I really need. I got on my sister's computer and began to research all the topics where people had the same problem. I did everything. I tried the verbose mode, but everything seemed to be okay. In verbose, I did the fsck -fy and reboot, but it still wouldn't start. I did the PRAM and SMC resets. I tried to open it in Safe Mode, but I couldn't get it to open. This morning, I got out my Snow Leopard disc and was able to boot that up. Unfortunately, I, stupidly, have not used time machine to back anything up like I should. I don't want to just wipe and restart everything because there are some files I really need to get. I'm trying disc utility. When I verify the disc, it says that the Sibling Link is invalid and it can't repair that. It tells me to back up as much as I can and then to wipe it and start over, but I don't know how to back stuff up from here. I've also tried "Permission Verify". It comes up with all this things that say either "Group differs on..." or "Permissions differ on..." and then it goes on with a long line of text starting with "Applications/Utilities/....etc. etc." and they all end with either "should be 0, group is 80(or 90)" or "should be -rw-r--r--, they are "-rw-rw-r--". But before it finishes verifying them, it stops loading with about a minute left and pretty much just freezes other than the mouse being moveable.
I'm out of town right now, but I'm probably just going to take it in to the local Mac store when I get home since there's not one around here. Of course, if this is something that I can fix, I'd prefer just to do that. Someone please put me out of my misery and tell me that my files are recoverable. When I'm in disc utility, it says I have the exact capacity I had when my computer was booting, so that gives me hope that all of my files are still there, not to mention the fact that I could see them in another program under "Utilities". Unfortunately though, I'm not computer-savy enough to know what to do. Sorry for all this writing, but hopefully this way all you tech-wizards' questions will be answered so that you know how best to help me.

Yes, I'm using my snow leopard DVD. I wrote all of this in my first post. I tried to boot safe mode from Terminal by doing the "sudo nvram boot-args="-x"" thing. Also in my first post, I said that i used Disc Utility and that it told me the Sibling link was missing or was wrong. Read my first post and you'll see everything that I've tried.
Also, an update on something, now when I upload in Verbose mode, it tells me the bugs; it didn't do that before.

Powerbook won't boot past apple screen, disk utility can't repair

Last night I applied the most recent software updates, I don't remember exactly what they were but there was a Java update, a security update, a quicktime update and an itunes update. after the required restart, my powerbook g4 won't boot past the apple icon screen.
I can't boot it into safe mode or single user mode.
I can start it up in target disk mode and transfer a handful of files/directories at a time before it hangs.
When I try to run the repair in Disk Utility against the target disk, it gets about halfway before the following:
Verify and Repair disk “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid sibling link
Volume check failed.
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
the disk doesn't make any grinding or anything, just a few clicks when it tries to boot but nothing bad sounding.
Is my computer hosed? Is it worth bringing it to the genius bar?

Hi, Pat. How much time did you give DW to complete its work? Locating the data it needs to rebuild your directory can take a while — that's the step at which DW far outperforms other utilities. It digs deeper and tries harder than anything else, and that can take a long time. The longest successful DW "fix" I've seen reported here in the seven and a half years I've been participating in Apple Discussions was *14 days* of continuous work to find the necessary data and reconstruct a hard drive directory from it. That was after all other disk utilities had been tried and had failed; it was the user's last hope to save data that hadn't been backed up anywhere. If you haven't allowed DW at least a few hours to accomplish its task, give it another chance. And don't try to use the computer for anything at all while DW is working.

IMac G5 Power PC won't boot past the grey apple and pinwheel

After everything froze and having to shut down (holding the power button), it won't boot past the grey apple and pinwheel. After a few seconds, the fans speed up and then nothing else.
*it won't boot into safe mode (holding shift)
*booting to OS on DVD works but then freezes after select language and hit "continue"
*disk utility shows the actual hard drive name but no disk image/partition is listed for me to repair or change
*running the system hardware diagnostic CD returns a list of "passed" for all hardware
I did have the logic board replaced during the extended warranty period a few years back and have not had any issues at all since.
Any thoughts, suggestions, tricks/tips?

Perfect diagnosis. I replaced the HD and reinstalled the OS. Back in business! Thanks!

I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have, it conects to my itunes and computer, but just won't get passed the logo..what can i do? :/

I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have been successful. It connects and is recognised by my itunes and computer, but still after restoring it, it just won't get passed the logo..what can i do? what is the problem?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?

My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?

I have tried resetting PRAM and all other items listed in the Apple support site. This happened after an update to iTunes was added. Also this is happening to other people. Please help.

I tried to update my ipod touch to ios 6 and now it wont boot past the apple icon. please help

I tried to update my ipod touch to ios 6 and now it wont boot past the apple icon. please help

Put your ipod in recovery mode and then restore your software again.

G4 won't boot past grey apple screen

Hi. I have been having the same issues with my G4 15". I'm frustrated. The whole thing started with stalling during applications. So I decided to reinstall my OS X 10.5. After reinstall, I copied my saved files from my "My Book" drive back to my hard drive. Stalling issues returned. I reinstalled again. still had some stalling issues, so I performed disk utilities. I repaired permissions. SMART status is verified. System still ran extremely slow. So, I followed directions on apple support for resetting the PRAM and NVRAM. After I did this, the computer won't boot past the grey apple screen. I have reset the PRAM and the NVRAM again. Still nothing. I rebooted up from OS install disk. I performed disk utilities repairing permissions and repairing HD. I did this for both my drive and the computers drive. I choose restart and again the grey apple screen. I have been trying to get this thing going for a week now. I'm near tears. Cornelius or anyone, can you help me? It says no errors are found, SMART is verified. But I can't get the computer to boot unless it is from the CD. Is the computer confused on where to boot from? Or is it shot? HELP ME PLEASE, before I play frisbee with my dear beloved mac!!!! It seems like this ALL started happening after I installed the update 10.5.8. I had ZERO problem prior to any software updates!!!

There have been report of some external drives/enclosures that do not work as a boot device. Not sure if the MyBook is in that category or not, just make sure that there is nothing else plugged into the Powerbook then try again.
Does the WD need its own power to be plugged into an AC power source? Try the other firewire port
I have one more question for ya... You were able to load OSX on this EHD using the OSX install disk in the Powerbook? And the installer saw the EHD with no problems?
If non of the above works try booting while holding down the x-key, this should force it to look for an OSX volume, not sure if it works the same on an EHD but worth a shot.

Powermac G4 (OS 10.4.11) won't boot past grey apple

1- My PowerMac G4 (running OS 10.4.11) won't boot past the grey screen with the apple. Any suggestions?

I found somewhere else how to hold down the mouse on starting, which opened the tray. I was able to startup with the disk, holding down the C and get to the Disk Utility window. Tried repairing the disk, but got this message:
Fist Aid failed:
Disk Utility stopped verifying "Macintosh HD" because the following error was encountered:
The underlying task reported failure on exit. <OK>
and in the info window it says,
"Verifying volume "Macintosh HD"
Checking HFS Plus volume.
Catalog file entry not found for extent
The volume needs to be repaired.
Volume check failed.
Error: The underlying task reported failure on exit (-9972)
1 volume checked
0 HFS volumes verified
1 volume failed verification
Sounds pretty ominous! Of course, the recommendation is that I backup everything , but how can I if I can't get to the desktop to back it up? (It hasn't had a lot of use for sometime, but is available as a film scanning station, and so that I can access scanned images on my iMac. I doubt that there is a whole lot on the drive that isn't backed up, but I would prefer to back it up for sure!)
Thank you again.

Macbook won't boot past main apple screen

I was using my computer this morning (13" black Macbook that I've had since December) and it was working fine until I closed it to go get something to eat.
When I got back and opened the lid again, the screen was black, as if it was off, but I could make out the outline of the Apple logo in the centre. So I turned it off, gave it some time and turned it back on. Now it won't boot past the main Apple screen, where the little timer thing spins and spins and spins while apparently nothing else happens.
I left it alone for a couple of hours, thinking maybe it was overheated, but that didn't make a difference. I tried taking the battery out and restarting it, but that didn't work either. I called Apple, but my parents opted for Future Shop's warranty instead of Applecare, so they told me to search the website as "the issue is well-documented," since I have no tech support with them.
I've searched around to see where this is posted or if it's been answered a billion times before, but it's 35C in here, and my rage/frustration are ruining my ability to be rational, haha.
Anyone experienced this before / is there a resolution that doesn't involve me being without my computer (which is like sweet, sweet crack to me) for an undisclosed amount of time?
Thanks in advance,
Emy
Oh, and I'm not sure about the operating system version beyond that it's OSX and I regularly install whatever updates they tell me to.

Maybe Disk Utility can repair the disk this way:
-Search your installation DVD's.
-Insert the disc 1 and sthut down your Mac
-Start your Mac again while holding down the C key
-Now your Mac should boot from the CD, this can take some time.
-After a while you will see a installation screen where you can chose a language.
-Chose English and continue.
-Then click some time's next and agree with the "Software Agreement".
-Open Disk Utility. Top menu bar --> Utilities --> Open Disk Utility.
-Select your hard disk in the list of disks and volumes on the left side
-Go to the First Aid (tab somewhere on the right).
-Click the button to verify the permissions.
-Then Click the button to repair the permissions.
-Click the button to verify the disk.
-Then Click the button to repair the disk.
-Exit the Disk Utility

My Macbook Pro shows the apple and spinning wheel at start up but won't continue startup. Any Help would be appreciated.

My Macbook Pro shows the Apple and spinning wheel at startup but will not continue the startup. Does anybody know how to get past this, so the computer continues to startup?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Power Mac G5 wont boot past the Apple Logo

Mac: Power Mac G5 2.7Ghz DP w/ 4gb RAM (2x1gb, 4x512mb), Leopard
Last week, I formated this computer and reinstalled OS X 10.5. I updated everything, reinstalled all my applications and replaced my documents. Everything was good for a couple days. I have and HP 1350 all-in-one printer (which HP no long has mac support for that model, so I can only use the scanner as a photocopier, but that's not the issue, it prints fine and I have printed files since the formatting) The printer is connect via USB to my Power Mac and then shared on my home network, wirelessly, with 2 other MacBooks and a 27" iMac. My roommate was trying to print something from his MacBook. In the printer queue on the MacBook, the file would say it was printing, but nothing would actually printer. When I went to the printer settings on the Power Mac, the dialog box said the printer was "in use." I reset the printer, nothing happened. I restarted the Power Mac, properly, and now the computer wont boot past the Apple logo. The spinning gear appears and spins for a minute or 2 and then it will just reboot on its own. It will just keep doing this in a continuous loop.
I've tried to boot into safe mode (holding shift) but it still does the same thing.
I manage to get the CD drive open by booting into open Firmware. I restarted the computer and was able to boot from the Leopard disc. I ran disk utility, and repaired the drive and the permission but everything was ok.
I've unplugged any USB device connect but to no avail.
I really don't want to reinstall Leopard again. it took almost 8 hours to install all the applications (such as Logic, Komplete 5, etc) and I had not setup time machine. There are some document files that I would prefer not to loose, but could deal with the loss.
any suggestions?

Ok, so I reinstalled Leopard, all my documents were in the "Previous Systems" folder, and the applications where present. I went to Software Updates to download all the need updates, which included 10.5.8, itunes, security fixes, etc. It notified my that I would have to restart. I click ok, everything was logged out and the updates started installing. As the computer restarted itself after the updates, i had the same issue again, where it would go to the Apple logo and then restart itself. The second time around, it just froze and the warning "You need to restart your computer" with the power logo in the background came up. So I manually restarted my computer and everything logged in correctly. I restarted it a couple time to see if I could duplicate the errors but everything keeps working properly. Now I'm kind of scare to restart my computer.
Any suggestions as to why this would be happening? Is this most likely a software issue or a hardware issue? This never happened before I formatted last week. The last time I formatted the computer prior to that was less than a year ago.

PowerBook Won't Boot Past the Apple and Spinning Flower Screen...

Similar Messages

Maybe you are looking for