Powerbook won't shut down, wake up, or restart
PB G4 15" A1106 1.5 ghz, 1G ram, 100G HD, 10.5.7
I'll describe problem first with no battery in the laptop; only AC plugged in.
When running, if I push the power button, or go to apple menu, and select either "shut down" or "restart" all programs quit, the desktop picture shows, but the laptop will not shut down, or restart, if that's what I picked.
I can shut it off by holding down the power key.
It starts up fine, runs fine, and "Diagnostics" under the "about this mac" says "passed".
If it goes to sleep, by closing the lid, the pulsing light is on. When I open it up, it briefly comes to life,then goes back to sleep after about a second or two. I then have to hold down the power button til it shuts off, then start it up again.
When I put a battery in, which isn't that great of a battery (only lasts about 20 minutes), I cannot shut the PB off by holding down the power key. I have to both remove the battery and disconnect the AC, then hold the power button down. When I am only using the AC, I can leave it plugged in and shut it down by holding in the power key.
I tried resetting PRAM and PMU. I tried taking suggested files out of preferences folders. I upgraded from 10.5.6 to 10.5.7. I unchecked the options in the "Energy Saver" system prefs.
Any suggestions?
Thanks
The topic header says there is already an answer to my problem, but I searched and couldn't find it : (
Similar Messages
-
PowerBook won't shut down, restarts instead
Hello,
I've read dozens of post about shut down issues with the older PowerBooks, but I can't seem to find any tips for how to deal with my issue. Here's what's going on:
PowerBook G4 500Mhz, Airport Card, 512MB Ram. Nothing connected via USB or Firewire.
When selecting "shut down" from the Apple menu, the computer restarts instead. I can't shut the computer down!
Here's what I've tried so far:
- Wiped disk clean, reinstalled OS 10.4.9. Created new user.
- Removed Kingston 256MB Ram chip and restarted.
- Removed battery and restarted
- Repaired disk permissions
- Reset PRAM
Any help would be appreciated, since I can't sell this computer if it won't shut down.If verify disk didn't show any problems, then repairing the disk may not change anything. Still, it would be good to have your system discs available for troubleshooting. Apple will allow you to make a safety copy of your discs, so if you want to leave the originals in a safe place and make copies to carry around with you, Apple allows you to do that.
Do you have a bootable clone? If so, you could boot from it and then repair your boot drive should you need to. Just an alternative if you don't have your discs with you.
Maybe I'm not clear on just what's happening. Does your computer completely shut down and then start up again, just as if you had hit restart? Or does it fail to completely shut down? If the latter, I am wondering if you have some process or open window that is aborting the shutdown process. You might want to check in Activity Monitor and see if there might be some hung up process. Be sure to select "All Processes" at the top.
Good luck! -
My Powerbook G4 17" 'hangs' when I try to close it down via the Apple menu. There are no (visible) applications open but the only way to shut down is to do a hard turn off via the power button. This has only been happening for a few days now and I can't figure out why!
Can anyone help?
JulieYour profile states OSX 10.4.3. You should update it to 10.4.11. As for the shutdown problem: Whenever my machine gets funky I always run Onyx. It's a free disc maintenance app. Install it and run 'automation'. That should sort out the issues for you.
Onyx - http://www.titanium.free.fr/pgs2/english/download.html -
Upgraded to 10.4.8-My Powerbook G4 won't shut down or restart
Upgraded this weekend from 10.3.9 to 10.4.8 and now my PowerBook G4 12" won't shut down. Nor will it restart.
It does clear the screen of the menu bar and all items on the desktop, but that is all. Desktop picture remains the same. There is no indication of any activity but it never proceeds farther than that. Shutdown and restart both act the same way.
Solutions?
I can turn off the computer using the power switch when this happens. Then I reboot by pushing the power switch again.
I've also tried repairing permissions which seems not to have changed anything.
It's quite a nuisance. Any ideas on solutions?OK, you may have deeper problems. First, go to System Preferences/Accounts, and make a 'Test" account, with full admin privileges. Switch to that account, by logging out of the manin account (Apple Menu), and see if you still have the same symptom. If you do, and Archive and Install might be the cure.
Note: Save the combo update, to perfrom the upgrade again. -
When I tried to shut down my other Ipad(by sliding the red bar) the gear symbol started spinning but it won't shut down--the gear is still spinning 18 hrs later.
Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
HELP!!!
Here are the specs of my machine:
2011 13.3" MacBook Pro
4 GB Ram/320 GB HD
For the past several months my MacBook Pro refuses to shut down or restart without holding down the power button. Whenever I choose to restart or shut down the computer, it will hang on a grey screen. I have even tried letting it hang for an hour, and it still won't shut down. I notice that once in a while it will retart or shut down correctly if I had not used opened iTunes since turning it on. However, even manually closing iTunes before shutting down or restarting does not solve the problem. It seems as though it only shuts down if iTunes was not used since restarting the computer. Is this a registry error? Do I need to reinstall iTunes? I noticed this problem began happening after I uninstalled Kaspersky Virus Scanner, could that be the problem as well? Also, I cannot guarantee that the problem is only associated with iTunes. I just noticed that one of the few times it shut down or restarted correctly, iTunes coincidentally had not been used. Also, this problem started happening while I was still using Lion and has continued despite upgrading to Mountain Lion.
Also, whenever I update my iPod through iTunes, it won't eject properly, and a transparent icon of the iPod displays on the screen even after I have removed it from the USB port. Furthermore, the iPod will only be recognized by iTunes and will only be updated the first time I plug it in. After removing it and plugging it back in, it won't recognize or update the device unless I shut down and restart the computer. I have the latest addition of iTunes. I also have two iPods, one 80 GB Classic, and one 8 GB Nano, and I have the same problem with both.
I have AppleCare. Should I take my macbook to the genius bar?
Applications I normally use are Word, Safari, FireFox, iTunes, FinalDraft, Photo Booth, Notes, Mail, App Store, etc. No real heavy lifting.
Any feedback would be very much appreciated. :-)
Thank you everyone!!I have this question too.
-
External hard drive won't shut down after switch from OS10.5 to OS10.4.11
i recently chanded my OS from 10.5 to 10.4.11 (as a programme i want to use is not compatible with leopard), but since i have done this my external hard-drive won't shut down automatically when i shut down my mac. i have to switch it off at the plug instead.
can anyone suggest how i can get it to do this again?
i'm a little concerned that i'm damaging the external drive by turning it off manually all the time..
thanksSome hard drives shut off with shutdown, some don't. Sometimes hard drives that did shut off with one system will not do the same with a different system. My hard drives which did shut off, prior to 10.5 now stay on.
This is not really a problem as all hard drives spin down after 10- 20 minutes when not in use, whether your computer is on or off. Leaving the drive on is fine, shutting it off manually is fine.
-mj
[email protected] -
I had a disk error with a SD disk from my camera. Removed the disk from the card reader and got the Disk Removal Error alert. Then the whole thing froze up on me. Noting else would eject, No other apps would shut down and basically nothing worked. I couldn't shut down so I removed the battery. Restarted the computer ok then tried to repair the SD disk in question. No luck on the repair so ejected it again. Then tried to restart OS and it won't shut down again except everything still works but it just won't shut down.
Some hard drives shut off with shutdown, some don't. Sometimes hard drives that did shut off with one system will not do the same with a different system. My hard drives which did shut off, prior to 10.5 now stay on.
This is not really a problem as all hard drives spin down after 10- 20 minutes when not in use, whether your computer is on or off. Leaving the drive on is fine, shutting it off manually is fine.
-mj
[email protected] -
Mini Mac won't shut down!
Core Duo won't shut down or log out or re-start but can sleep. Can use terminal to kill processes but it is not an application causing the problem. The output is to a TV via S-Video and am using wireless keyboard via USB.
Appreciate any suggestions.hello to the mac world
@sunra
same problem here on my mini mac, intel solo core, happens 3 times in one week now.
it seems that my mini ignores shutdown, restart and log out.
when I terminate the task "login window" then he jumps to the login screen, where I can shutdown or change the user.
anyone an idea about this little problem?
okay, it is not a big problem and with this problem I feel already home now...yes, I used windows the last years
greetings
user1010
ps: please excuse my bad english! -
Macbook Air isn't a year old and I don't leave it plugged in ever. The battery might last 2 hours and gets very hot. In addition the fan runs at a very high speed. The computer won't shut down in a normal way. I have to hold the power button down to shut it off. Can someone suggest something please.
Thanks.Runaway applications can shorten battery runtime
-
I got a iPod nano about a month ago, and installed iTunes on my PC. All is well so far... until I try to shut down. The computer restarts instead. After installing and unistalling iTunes from the cd and apple.com nothing changes. I've tried shuting down all iPod and iTunes related processes in the task manager before shutting down, but the result is always the same.
Called Apple help, and they've never heard of this problem.
Can someone help? I like iTunes to much to give up on this one.
Morten G
Trondheim, NorwayWhat makes you think iTunes is causing this?
Are you getting some kind of error? Have you looked in your application & system event viewer logs?
I mean, if you've shut down iTunes & iPod processes in task manager, and Windows still won't shut down.....why would iTunes be causing this? -
Root.sh fails - asm won't shut down
I am trying to instal clusterware 11gR2 on Oracle Enterprise Linux 5. This is all running an Oracle Virtualbox environment, using ASM for the cluster disk in an openfiler. 32 bit installation, 1GB memory allocated to each node environment. I had to ignore errors for the following:
< 1.5 GB memory
small swap file
ncsd and ntpd processes not running (not connected to internet), I understand Oracle will install it's own timer service if this is not present
Running root.sh fails because asm won't shut down properly:
[root@odbn1 grid]# ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-08-24 14:46:44: Parsing the host name
2010-08-24 14:46:44: Checking for super user privileges
2010-08-24 14:46:44: User has super user privileges
Using configuration parameter file: /u01/app/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'odbn1'
CRS-2672: Attempting to start 'ora.mdnsd' on 'odbn1'
CRS-2676: Start of 'ora.mdnsd' on 'odbn1' succeeded
CRS-2676: Start of 'ora.gipcd' on 'odbn1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'odbn1'
CRS-2676: Start of 'ora.gpnpd' on 'odbn1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'odbn1'
CRS-2676: Start of 'ora.cssdmonitor' on 'odbn1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'odbn1'
CRS-2672: Attempting to start 'ora.diskmon' on 'odbn1'
CRS-2676: Start of 'ora.diskmon' on 'odbn1' succeeded
CRS-2676: Start of 'ora.cssd' on 'odbn1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'odbn1'
CRS-2676: Start of 'ora.ctssd' on 'odbn1' succeeded
ASM created and started successfully.
DiskGroup CLSVOL1 created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'odbn1'
CRS-2676: Start of 'ora.crsd' on 'odbn1' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 502348953fc24f1cbf9c9f0fdf5cf2e0.
Successfully replaced voting disk group with +CLSVOL1.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 502348953fc24f1cbf9c9f0fdf5cf2e0 (/dev/oracleasm/disks/CRS) [CLSVOL1]
Located 1 voting disk(s).
CRS-2673: Attempting to stop 'ora.crsd' on 'odbn1'
CRS-2677: Stop of 'ora.crsd' on 'odbn1' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'odbn1'
ORA-15097: cannot SHUTDOWN ASM instance with connected client
CRS-2675: Stop of 'ora.asm' on 'odbn1' failed
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-2673: Attempting to stop 'ora.ctssd' on 'odbn1'
CRS-2677: Stop of 'ora.ctssd' on 'odbn1' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'odbn1'
CRS-2677: Stop of 'ora.cssdmonitor' on 'odbn1' succeeded
CRS-2529: Unable to act on 'ora.cssd' because that would require stopping or relocating 'ora.asm', but the force option was not specified
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/grid/bin/crsctl stop resource ora.cssd -init
Failed to exit exclusive mode
Initial cluster configuration failed. See /u01/app/grid/cfgtoollogs/crsconfig/rootcrs_odbn1.log for details
[root@odbn1 grid]#
The rootcrs_odbn1.log shows the same error:
[root@odbn1 crsconfig]# tail -50 rootcrs_odbn1.log
2010-08-24 15:10:38: /bin/su successfully executed
2010-08-24 15:10:38: /u01/app/grid/gpnp/odbn1/wallets/prdr/cwallet.sso => /u01/app/grid/gpnp/wallets/prdr/cwallet.sso
2010-08-24 15:10:38: rmtcpy: /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/prdr/cwallet.sso -destfile /u01/app/grid/gpnp/wallets/prdr/cwallet.sso -nodelist odbn1,odbn2
2010-08-24 15:10:38: Running as user oracle: /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/prdr/cwallet.sso -destfile /u01/app/grid/gpnp/wallets/prdr/cwallet.sso -nodelist odbn1,odbn2
2010-08-24 15:10:38: s_run_as_user2: Running /bin/su oracle -c ' /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/prdr/cwallet.sso -destfile /u01/app/grid/gpnp/wallets/prdr/cwallet.sso -nodelist odbn1,odbn2 '
2010-08-24 15:11:20: Removing file /tmp/file1ye3x8
2010-08-24 15:11:21: Successfully removed file: /tmp/file1ye3x8
2010-08-24 15:11:21: /bin/su successfully executed
2010-08-24 15:11:21: /u01/app/grid/gpnp/odbn1/wallets/pa/cwallet.sso => /u01/app/grid/gpnp/wallets/pa/cwallet.sso
2010-08-24 15:11:21: rmtcpy: /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/pa/cwallet.sso -destfile /u01/app/grid/gpnp/wallets/pa/cwallet.sso -nodelist odbn1,odbn2
2010-08-24 15:11:21: Running as user oracle: /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/pa/cwallet.sso -destfile /u01/app/grid/gpnp/wallets/pa/cwallet.sso -nodelist odbn1,odbn2
2010-08-24 15:11:21: s_run_as_user2: Running /bin/su oracle -c ' /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/pa/cwallet.sso -destfile /u01/app/grid/gpnp/wallets/pa/cwallet.sso -nodelist odbn1,odbn2 '
2010-08-24 15:11:49: Removing file /tmp/filelEb5Lp
2010-08-24 15:11:49: Successfully removed file: /tmp/filelEb5Lp
2010-08-24 15:11:50: /bin/su successfully executed
2010-08-24 15:11:50: /u01/app/grid/gpnp/odbn1/wallets/root/b64certificate.txt => /u01/app/grid/gpnp/wallets/root/b64certificate.txt
2010-08-24 15:11:50: rmtcpy: /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/root/b64certificate.txt -destfile /u01/app/grid/gpnp/wallets/root/b64certificate.txt -nodelist odbn1,odbn2
2010-08-24 15:11:50: Running as user oracle: /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/root/b64certificate.txt -destfile /u01/app/grid/gpnp/wallets/root/b64certificate.txt -nodelist odbn1,odbn2
2010-08-24 15:11:50: s_run_as_user2: Running /bin/su oracle -c ' /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/root/b64certificate.txt -destfile /u01/app/grid/gpnp/wallets/root/b64certificate.txt -nodelist odbn1,odbn2 '
2010-08-24 15:12:26: Removing file /tmp/fileUQzFxE
2010-08-24 15:12:27: Successfully removed file: /tmp/fileUQzFxE
2010-08-24 15:12:27: /bin/su successfully executed
2010-08-24 15:12:27: /u01/app/grid/gpnp/odbn1/wallets/peer/cert.txt => /u01/app/grid/gpnp/wallets/peer/cert.txt
2010-08-24 15:12:27: rmtcpy: /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/peer/cert.txt -destfile /u01/app/grid/gpnp/wallets/peer/cert.txt -nodelist odbn1,odbn2
2010-08-24 15:12:27: Running as user oracle: /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/peer/cert.txt -destfile /u01/app/grid/gpnp/wallets/peer/cert.txt -nodelist odbn1,odbn2
2010-08-24 15:12:27: s_run_as_user2: Running /bin/su oracle -c ' /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/peer/cert.txt -destfile /u01/app/grid/gpnp/wallets/peer/cert.txt -nodelist odbn1,odbn2 '
2010-08-24 15:12:47: Removing file /tmp/filevnw3D8
2010-08-24 15:12:47: Successfully removed file: /tmp/filevnw3D8
2010-08-24 15:12:47: /bin/su successfully executed
2010-08-24 15:12:47: /u01/app/grid/gpnp/odbn1/wallets/pa/cert.txt => /u01/app/grid/gpnp/wallets/pa/cert.txt
2010-08-24 15:12:47: rmtcpy: /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/pa/cert.txt -destfile /u01/app/grid/gpnp/wallets/pa/cert.txt -nodelist odbn1,odbn2
2010-08-24 15:12:47: Running as user oracle: /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/pa/cert.txt -destfile /u01/app/grid/gpnp/wallets/pa/cert.txt -nodelist odbn1,odbn2
2010-08-24 15:12:47: s_run_as_user2: Running /bin/su oracle -c ' /u01/app/grid/bin/cluutil -sourcefile /u01/app/grid/gpnp/odbn1/wallets/pa/cert.txt -destfile /u01/app/grid/gpnp/wallets/pa/cert.txt -nodelist odbn1,odbn2 '
2010-08-24 15:13:19: Removing file /tmp/fileArkUFi
2010-08-24 15:13:20: Successfully removed file: /tmp/fileArkUFi
2010-08-24 15:13:20: /bin/su successfully executed
2010-08-24 15:13:20: Exiting exclusive mode
2010-08-24 15:13:41: Command return code of 1 (256) from command: /u01/app/grid/bin/crsctl stop resource ora.asm -init
2010-08-24 15:13:41: Stop of resource "ora.asm -init" failed
2010-08-24 15:13:41: Failed to stop ASM
2010-08-24 15:14:44: Command return code of 1 (256) from command: /u01/app/grid/bin/crsctl stop resource ora.cssd -init
2010-08-24 15:14:44: CSS shutdown failed
2010-08-24 15:14:44: Failed to exit exclusive mode
2010-08-24 15:14:44: Initial cluster configuration failed. See /u01/app/grid/cfgtoollogs/crsconfig/rootcrs_odbn1.log for details
[root@odbn1 crsconfig]#
Has anyone seen this before? All help greatly appreciated!Hi Sebastian,
Thank you for your quick reply. Here's what I tried:
1. reset the install as you suggested, and tried running root.sh again. The exact same thing happened.
2. restored to an openfiler snapshots that were taken right before the failed upgrade. Increased memory on both VMs to 1280M as you suggested. Rebooted the virtual environment and ran the installation again. This time, the root.sh script froze my environment - not enough memory to support this.
3. restored the openfiler snapshots again. Increased memory on one node (odbn1) to 1500M. Ran the install for a single node cluster. It got past this error.
Thank you!!!
Also, thanks for the tip on the ntp.init file. That did eliminate the error for ntpd not running during the installation. -
Import to iPhoto. Mac won't shut down..
I imported some of my pictures from my iPhone to iPhoto, I then stopped the import and took out my iPhone. My iPhoto won't shut down now and it says that the import shall finish before I can shut it down. I can't even shut down my macbook, because of this. Anybody who knows what to do about it?
Thank you so much, for the information. This worked for me as well (using force quit). I still have the issue of iPhoto not importing my last set of photos. I did force quit and then restarted iPhoto, hoping the pictures (and one video) would just upload and it still won't import them. I keep getting the same message as before, "Photos are being imported to the photo library. Please wait for import to complete". Only option is to click 'ok". or do a force quit. Have any input about this?
-
Macbook won't shut down unless i force quit!
Hi my macbook won't shut down unless i force shutdown.... it's been like this for a while so i hardly ever shut it down..... can't even close the case as it will then just continually shutdown and re-start itself on n on n on, whilst shut!!!
It does occasionally shut down successfully ...... but today it shut down fine.... 1st time i tried it for well over a week! But then refused to start up! 1st time it's done this!! it took over two hours to convince it to start!!! Any thoughts would be massively appreciated ..... apple care run out and ZERO funds to have fixed !!! : (( v sad as i love my mac and can't do without it!!!shelbell508 wrote:
I tried to run the disk utility and it wouldn't run properly
Exactly what did you do to run Disk Utility and exactly what happened up to the freeze?
I called some place to ask for advice and they said it could be my logic board???
That's an easy answer to give but not necessarily the correct one.
If you have the system restore disc that came with your Mac, boot with that disc in the Mac while holding down the "D" key. That will invoke hardware diagnostics. Run those several times to investigate the possibility that your Mac has a hardware flaw. -
Mac Pro suddenly takes very long to boot and won't shut down... just spins
My Mac started taking very long to boot up... maybe 10 minutes before the icon bar becomes available.
Also, it won't shut down... it just spins. I've waited 30 minutes with no results.
Any help would be greatly appreciatedCBuss,
The long boot cycle points to preference corruption. And not the kind that can be corrected with re-boots etc., Check Hard Drive>Library>Preferences to see if the listings make "visual" sense. If there are a lot of letters with circles over them and numbers interspersed, you are skating out on thin ice.
Back up everything now, then do a clean install of your current OS. Do not to an "archive". That will probably archive the corruption as well. Go up to Snow Leopard if you can. Add your data back manually as well. If you keep going with these lingering start ups, you will shortly get the "?" at startup instead of the Apple/ Chime and the long, expensive, recovery (by somebody else) will begin.
As for the 'shut down" issue.. I am still in the dark. Something is still "running" and canceling the shut down cycle.
Cheers
Toby
Maybe you are looking for
-
HT204053 how do i combine 2 apple ID's?
I have two apple ID's and rescent pre-ordered an album. I then received an email notification stating that it was ready to download. Checking my iphone and ipad I realised that it wasnt available on either. so i searched itunes and clicked purchase.
-
My computer suddenly stopped recognizing my 8330 , When I plug it in it doesn't sync , dosen't do anything . I'm running decktop manager 4.6 and my OS is XP . I tried changing the cable but that didn't do anything . HELP!!!!!!!!
-
IPads turn on when plugged in to power. Is there a way to keep this from happening?
I am a tech for a school district. We have iPads in carts and when they are plugged in they automatically turn on. This keeps them on the wireless when not in use which uses up our wireless ports. Is there a way to keep them from turning on when plug
-
Cannot print responses as a PDF
Why am I not able to print the form responses as a PDF? When I click the PDF tab, an UPGRADE window pops up. Yet when I go to UPDATE ADOBE FORM CENTRAL, it shows I have the latest version. PERPLEXED! I NEED TO PRINT THESE RESPONSES.
-
Hi it seems that the [SAP PCK |http://help.sap.com/saphelp_nw04/helpdata/EN/99/115281baba404890d2561617a78409/frameset.htm](Partner Connectivity Kit) does not come with IDOC Adapter. Is that really true ? Seems strange that I'd have to use the RFC