Powering Ipod Touch

I am contemplating buying an Ipod Touch. I reviewed the contents of the box it comes in, and there is no charger listed. Does the Ipod Touch run on batteries?? does it get its power from the USB connection?? Thanks for the information.

It takes 1.5 hours to charge %80. After that it takes 1.5 hours to charge %100.
More info here:
http://www.apple.com/ipodtouch/specs.html

Similar Messages

  • Trouble powering ipod touch off

    I am trying to turn the power off on my ipod touch but it won't allow me to.  Instead it goes to voice control.  Please help!

    - Try a reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Next try restoring from backup
    - The restore to factory defaults/new iPod.
    You are talking about Voice Control when you can give limited voice commandts to play music, right? Not Voice Over when the iPod sppeds what you are try to do.

  • My Ipod touch powered off on its own, when I turned back on, my 4000 songs were gone. Why?

    Hi. Today I was preparing to use my Ipod Touch when all on it's own, it powered off. When I restarted it, it came back on and I noticed that some of the setting's(date & time) were no longer as they had been when I previously set them. Other settings were not changed and they were as I had set them. The worst thing of all that was changed was 4000 of my songs were not on the device. I do not know what happened to them. Can some one help me with answers for the device powering off on it's own, having to redo some setting's, while other settings were fine, and last but not least, 4000 of my songs were no longer on the device.
    Please help me and I thank you in advance.
    Bryan

    I think that unless someone professional knows how to do a recovery, I may be screwed. Unfortunately, I did not have any connection with Itunes. I bought the IPod Touch from a local seller. I bought the unit mostly because of the 4000 songs that were on it.(yes I sat with the unit for a hour or so jumping from one song to another. I felt even better about the purchase due to the seller having the same likes with regards to music. When the lost songs first occurred, I immediately started wondering if the seller had tricked me some how. I may never know. Hey I have one more question. When a IPod has 4000 songs on it then that means a large portion of the original GB  has been used correct? My capacity was 29.6 GBs with only 2.3 GBs left in availability. So if the songs took up the 29GBs and then the songs are deleted or lost, don't it mean that the 29.6GBs goes back to Availability?

  • Can I connect n iPod Touch to powered speakers?

    I have an old pair of computer powered speakers. Can I connect an iPod Touch or Shuffle directly to the powered speakers? I would like to use the speakers in a garage with the iPod.

    The speakers just have the 3.5mm plug.
    If this is to plug into the back of a computer to get sound, then yes, just plug it into your touch headphone jack.

  • How do you fix a jalibroken ipod touch gen 3?  My  itouch has the apple skull on the powering up screen and won't do anything.  Thanks-

    How do you fix a jalibroken ipod touch gen 3?  My  itouch has the apple skull on the powering up screen and won't do anything.  Thanks-

    Put it in DFU mode (Google it), and Restore it as new in iTunes.

  • Photos lost from iPod touch after being powered off |HELP!|

    help please!!!!
    so I backed up my iPod touch 4th gen to iCloud and all 3 days ago as well as updating to IOS 6.1.5. Then I powered it off. Tonight (3 days later) I turn it on, connect to the wifi, and go to my photos. I had about 800, now it says it's restoring 1,267 of 3,012.
    what has happened??!!
    please help ASAP going away tomorrow!!

    Sounds like a glitch occurred. That happens sometimes and the iPod is rebuilding the photo library.
    You may end up having to restore from backup

  • On my Ipod touch the screen won't work. i can't unlock it by sliding it and i can't power it down. I've powered it down several times and turned it back on and it still won't work. What do i do?

    On my Ipod touch the screen will not work. I can't slide it to unlock and when i hold down both buttons the red slide comes up and i can't slide that either or press the cancel button. I've powered it down several times and i've turned it back on and it still will not work. What do i do? Please help!!!

    On my Ipod touch the screen will not work. I can't slide it to unlock
    Try here >  iPod touch: Troubleshooting touchscreen response

  • IPod touch with PCMCIA USB 2.0 powered card?

    I am looking to purchase an iPod Touch with the exception that my laptop does not have USB 2.0 I was looking into a powered PCMCIA USB 2.0 adapter and was wondering if the iPod Touch is compatible with these devices. I have read of success with iPod classics running off of these cards but wanted to make sure before i purchase one.
    Any help is appreciated.
    Thanks

    I only have 384MB RAM and i see iTunes min is 512... i have it installed and running as is but I'm sure it'll probably freeze if i was to connect and transfer music...
    **** old computers.

  • When powering off my iPod touch, any application (facebook, viber etc)installed using App Store won't work again

    When powering off my iPod touch, any application (facebook, viber etc)installed using App Store won't work again
    How to solve this issue?

    Try a hard reset first. Press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    If still no luck, try downloading and installing a new app from the App Store.  Doing so has cleared the issue up for several users.
    B-rock

  • Saving Place When Powering Off Ipod Touch

    When I turn off my ipod touch completely it always loses the song I was last on. This does not matter if I am playing a specific album or shuffling all songs. My other ipods (nano, mini, shuffle) always keep the place even when powered off. Is there a way to get the touch (2G) to save its spot?
    I note it does save it if I only put it to sleep and not power off completely. if I am not using it for a couple of days, should I put putting it to sleep or powering it off?

    The iPod is telling you to connect the iPod to your computer with iTunes.  When connected, iTunes should open and tell you what to do.  If it does not, you want to do is to restore the iPod from backup.

  • HT201406 My iPod touch is locked up. It will not restore from update mode. After holding the on/off button down the slide to powerer off does not appear.

    My iPod is loched up. I downloaded a new update and now it will not restore.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My 1st Gen Ipod Touch won't charge while turned on, dies 30 seconds after powering on.

    I own a first gen Ipod Touch. Recently I let it sit until the battery died. When I went to charge it, it wouldn't charge unless I held the charger a specific way. Then, when I discovered the one way it accepted the charger, it started charging. However, once the apple logo popped up and my password screen came on, the ipod was no longer charging. Keep in mind I still had the charger in the same way as before. Around 30 seconds after the Ipod started, it shut back off. This keeps happening and I've tried a bunch of things. Nothing I've searched for gets me any results. Any help?

    Have you tried:
    - Using another cable?
    - Restore in the iPod. First from backup and then to factory defaults/new iPod?
    - Looking carefully at the dock connector on the iPod.  Look for bend or corroded contacts or other abnormalities?
    It sounds like you have a problem with the dock connector or cable or maybe a bad battery.

  • IPod Touch (3rd Gen) won't boot unless usb powered

    Info:
    iPod Touch (3rd Gen) 32 GB
    Latest Version available (5.1.1)
    Tried resetting settings
    Tried hard reset (home button and power button at the same time until apple logo)
    Has a full charge
    So basically any time I try to turn the iPod Touch on it will bring up a black screen for a second on the display, fail to boot up to the apple logo, and then shuts the display off.
    I have done everything up to restoring it on iTunes as listed here: http://support.apple.com/kb/TS3281
    The only problem is in the process of this occuring I have had a hard drive fail so my iPod Touch backups are more than likely lost without further analysis. So what would be the next best step? I assume refreshing it and backing up everything with a backup on my new hard drive under iTunes. Obviously, my computer would know anything about this iPod since I don't have its previous backups, but I should still be able to get the basics (music,videos,photos,etc) back thanks to default iCloud account right?
    Thank you for your time.
    Michael

    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Likely a bad battery
    Apple Retail Store - Genius Bar          

  • If an iPod touch 5th Gen is completely powered off, can apps still run down the battery?

    Hello,
    I own an iPod touch 5th generaion that is less than 2 months old, it worked great until about a week ago then the battery started depleting rapidly, usually  fully within a 12 hour period even if I did not use the unit.
    I started trying to figure out if there is anyting I cold do and learned a lot about apps left open draining the battery, etc. but making sure they were all closed did not help.
    I then restored the unit to factory default, but this does not help.
    The last thing I tried was to turn the unit completed off at night using the power switch by holding it until the unit turns off.
    My question is, once I do this can any app use any power at all?
    The reason I ask is because I had spoken with 3 Apple technicians and all 3 of them do not understand or can answer the question. They keep asking me if I know how to look in the taskbar to turn off the apps which once the power is off is not an available option.
    I will greatly appreciate your response.
    Mike.

    Thanks so much for your answer.
    Yes, I am sliding to power off.

  • Ipod touch powers external speaker

    Looking for tips, links to existing discussions, etc., on using the iPod Touch 3.5"" jack output to power an external speaker.  How much power does the jack provide?  Enough for a generic 20 watt rated speaker that's fairly efficient (say, 92db 1w/1m)?  Or do I need to build a small wattage op-amp device to drive the speaker?

    Maybe:
    http://www.head-fi.org/t/97419/what-is-voltage-output-of-ipod-headphone-jack
    http://www.ehow.com/info_12024907_many-watts-ipod-headphone-jack-put-out.html
    Google for more.

Maybe you are looking for

  • Can't export a pdf for printing?

    Hi, I'm working in Adobe Indesign CS6 and I can't export a print pdf, just interactive. When I choose print pdf nothing happens and the file size is ju 0 kb. What could I be doing wrong?? Can I export an interactive pdf and send that to the printing

  • 2LIS_02_ITM enhacement add EKPO-BUKRS but we get Purchase Order Line for 2

    Hi All    We have active extractor 2LIS_02_ITM, This exctractor has an enhacenment, we add field EKPO-BUKRS before activate this extractor...    Now... in Production system we look that we have the combination of SAPR/3- purchase order - line item -

  • Mail with a socketconnection?

    Hello! How do I send mail with a socketconnection. Can I transform the emailadress (= mailHost) into a Ip-number and send it? What I know port 25 is used by emailcommunication. How should the syntax be written? mailSocket=new Socket(mailHost,25); out

  • Message keeps popping up saying clearing history even though it isn't!

    For the past few days I keep getting a message pop up saying my browsing history is being cleared please wait even though it isn't! and I also don't want it to clear. Around the same time I get the following error message 78p8t3ql.exe ( I think after

  • Red line and beeps when trying to apply Audio Filters in FCE

    I'm using FCE 4.0.1 and am getting red line and beeps when trying to apply Audio Filters. I have rendered the files. No problems with audio otherwise.