Powering on Macbook Pro While Connected to Cinema Display

Is this possible? Right now I have to power up my Macbook Pro, close it to get into clamshell mode, then connect it to the display. Any way I can just connect it to the monitor then power it on?

{quote}Any way I can just connect it to the monitor then power it on?{quote}
Yes. If you want clamshell mode connect the display, hit the power button, and close the lid. For both displays leave the lid open.

Similar Messages

MacBook Pro 2011 Connected to Cinema Display Issues

Started out as occasionally and now more often! When the laptop is plugged into the cinema display it occassionally will turn off or freeze completely. The only solution seems to be restarting the the laptop its self. Any ideas? We've already brough the display in and nothing could be recreated (of course)
Anyone had these issues?

{quote}Any way I can just connect it to the monitor then power it on?{quote}
Yes. If you want clamshell mode connect the display, hit the power button, and close the lid. For both displays leave the lid open.

Charging Macbook Pro while connected to iMac 27"

is it possible to charge Macbook Pro while connected to iMac 27" and what kind of connection or cable i should use ? firewire ? usb ? somthing similer to the 27" Cinema Display.
Kindest Regards

Yes. Use a Mini DisplayPort to Mini DisplayPort cable.
(120600)

How can i connect my MacBook pro to my 24" cinema display and my led tv?

I sãs wondering if there is a way of connect my MacBook pro to my 24" cinema display trough mini displayport and my led tv trough the hdmi input. I know that is a lot of addapters but i never saw something that allows me to do it.
Thanks for any help

You can get a Matrox DualHead2Go:
http://www.matrox.com/graphics/en/products/gxm/dh2go/
There is also one for 3 monitors if you fancy that too...
and http://www.monoprice.com sells all kinds of cable adapters for your displays

HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

Mid 2009 13" MacBook pro mini-dp to Cinema Display screen jumps from blue to desktop

I'm using a kanex brand iAdapt mini-dp to dvi adapter to connect my macbook pro to my 23" cinema display from early 2007, but it seems like the macbook is having trouble recognizing that the display is connected. The screen will go blue for a second, then show the desktop, then go back to blue. it repeats like this for as long as the adapter is plugged in.
I've gotten the screen to connect properly twice, but as soon as I unplug my laptop and try to plug it back in another day, I run into the same issue as before. I've seen other discussions about screen flickering, but this isn't really a flicker. Not sure if anyone else has experienced this, though it seems likely that this has happened before.
Any solutions? Thanks!

Hi thedankness,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful with troubleshooting your display connection:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Regards,
Jeremy

MacBook Pro, 27 inch LED Cinema Display and OSX 10.7

I do have a MacBook Pro and 27 inch Cinema Display. To improve the wireless connection I have to open the macbook. Doing so whilst running OSX 10.7 my Cinema Display changes autimaticaly to the settings of the MacBook display.
With OSX 10.6 this was OK.
Is this a bug or does anybody know how to overcome the change in display whilst opening the MacBook ?

Having the exact same issue, same set of circumstances.

Will 2008 macbook pro work with 27" cinema display?

November macbook pro 13"
will this work seamlessly with new cinema diaplay?
also - how come it's not HD but 30" is? thanks.

I am using and enjoying my 27" Cinema Display with my October 2008 MacBook Pro 5,1. The display is breathtaking and its operation with my computer is flawless. I strongly recommend that you consider getting an Apple external keyboard and Magic Trackpad to use with your MBP and Cinema Display.
If you have a MBP 5,1 as your post indicates, it has both a 9400M and a 9600M GT GPU, not a 9200M.

Connecting 08 MacBook Pro to new 27" Cinema Display

I have a MacBook Pro purchased in 2008 and am trying to connect it to a new 2011 27" Flat Panel Cinema Display. The DVI port from the display will not fit into the DVI port in my laptop. Any ideas why? Both Apple and our IT people have given us several things to try and nothing has worked so far. Please help!

These are the ports on the left side:
These are the ports on the right side:
And these are the different DVI ports. The top is the one that actually fits into my MacBook Pro (it's connected to an old display). The bottom is a cable we bought that we thought would help convert the mini DVI to DVI but it doesn't fit into my DVI port on the computer.

New MacBook Pro & 27" Apple LED Cinema Display Don't Go to Sleep

I recently purchased a new 13" MacBook Pro (MacBookPro8,1) and a 27" Apple LED Cinema Display. When they are connected the computer occasionally has a problem being put to sleep. When clicking sleep, the monitor will take a little while to shut off, but in about 10 seconds, it will turn back on. Immediately when turning on, the image on the screen is quite scrambled (it does correct itself). Usually, if I attempt to put it to sleep multiple times, it will end up working. When it does go to sleep (correctly), the screen will turn off much faster than the times where it doesn't sleep.
Anyone else have a similar issue they found a fix to? When speaking to Apple support, they thought it was part of an issue with 10.6.6, however, the update to 10.6.7 did not solve the issue.
PS - I keep my MacBook Pro lid closed when using the display.

Is your 2.6 the CTO upgrade from the high end 2.3 15"?
Yes, both will work under OSX and Windows. One note, when you boot Windows, you need to unplug the USB from the LED Cinema display or Windows will not boot. Once booted, then plug the USB back in to regain brightness, etc controls.

MacBook Pro wont recognize 23" Cinema Display

I am trying use my macbook pro with its lid closed while connected to my 23" cinema display. However, when I wake up the system with a mouse, the cinema display will wake up (without the menu bar and dock) but after a few seconds, go right back to sleep. What is the problem?
I can use the macbook pro screen and cinema display screen together as a dual display just fine.

What happens if you shut the MBP down, connect it to the ACD, open the lid on the MBP only long enough to press the power button and then immediately close the lid? That should cause the system to start up with only the ACD active. See if that works.

MacBook Pro cannot connect to external display (projector) under Windows

Our office has got one of those lovely new 13" MacBook Pros and we cannot figure out why it cannot connect to either of our 2 projectors with Windows 7.
We have an older MBP with NVidia graphics that connects just fine under both OS X and Windows. And this machine connects fine under Snow Leopard.
There was a recent Thunderbolt chipset update and we applied that; on the Windows side the Intel driver has been updated but nothing happens. Have also zapped the PRAM to no effect.
To add another wrinkle: I just connected the MBP to my Cinema Display and the external display shows fine in both OS X and Windows--Windows didn't even require me to go to the control panel.
This leads me to two thoughts: either it is something with the Thunderbolt to VGA adaptor (hard to believe, though, since it works for OS X) or it is something to do with the native resolution of the projector (equally hard to believe, as changing through various settings in Windows NOTHING happens on the external projector--it doesn't blink, go back or anything.)
Any ideas?

I wish I could find the discussion, but I cannot.
There was a discussion about the Windows 7 driver for the Thunderbolt port. The conclusion I believe was that it only outputs digital signals, not analog.
The other conclusions were:
A USB-VGA adapter adapter bypasses this limitation because the driver is in the adapter itself and works regardless of the OSX/Windows operating system in charge.
Run Windows under VM, where OSX is in charge and can create analog output through Thunderbolt
If only I could find that thread ...

MacBook Pro compatibility with old Cinema display

This subject has come up in other posts, but I didn't find my problem. We've just purchased a new 15in MacBook Pro 240/4/320, OS 10.6.4. I want to connect it to a circa 1999, 22" Apple Cinema Display, M5662. This has two connectors, a USB and DVI. I have the DVI adapter to Mini Display port. Nothing shows up at all on the Cinema display with this connected. The display works just fine with an older MacBookPro 1,1 (Intel Core Duo) running on OS X 10.5.8; this hook-up has a direct DVI plug. Apple support thinks its an incapability problem and doesn't really offer any else...they don't support them anymore. Any suggestions?

Hi Larry!
I know it seems like a silly question, but I believe these older displays had a fancy protocol in the DVI cable that allowed them to power-on automatically when you turned the computer on. This may not be supported through the adaptor. Have you tried touching the small power button area on the front right corner of the display bezel?
Regards,
-Ryan

Color with Macbook Pro 15 inch and Cinema Display

Hi Guys,
Had a quick question.
Do you think if i got the New Cinema Displays and connected it to my MBP 15 it would work?
Because it states color cant work great with my macbook pro screen. So if i hook up the Display would that work or does it depend on the video card in my MBP?
Hope i explained my self good.
Thanks in advance for your help.

To add to Mr. Owens response, sure, it may boot as a second screen but then you need a dedicated input/output device and proper production/broadcasting/grade monitor to actually see what you're doing. How will you achieve this with your rig?

Problem waking MacBook Pro when connected to external display

I have the new 13" MacBook Pro and like to use it connected to an external VGA display (Xerox) with the MacBook Pro in closed clamshell mode. The problem I am having is that after working for a a few hours, when I put the Mac to sleep with mains power connected, usb keyboard connected and the external display connected (via mini display to VGA adapter), the Mac will sometimes refuse to wake. I have a wireless Mighty Mouse also and the Mac is set to wake with Bluetooth devices. When I click a key on the keyboard or click the mouse a few times the pulsing sleep light at the front of the Mac goes solid but nothing appears on the external display. If I open the MacBook Pro the solid light goes out but the Mac does not respond. If I close the MacBook Pro display, the solid light comes on again. I have no option but to force a restart. This is an intermittent problem. I have yet to have this happen when no external display is connected.

I have the exact same problem.
Here's my story:
To give you some backgroud, my setup involves having the macbook on a mstand hooked up to an external monitor. I run a usb hub from my macbook, this is where my mouse transceiver is plugged in. I use am Apple wireless bluetooth keyboard (latest slim model)
I recently purchased the 13.3' inch 2.26 MBP as I gave my older 2.0 uMB to a family member. The computer is in the stock configuration with no hardware upgrades.
I have noticed weird behaviour when waking the computer from sleep when the lid is closed. When i wake the computer up (by tuning on bt keyboard), the keyboard light blinks like there is not bt connection and the computer will wake in an inactive state. The led light will be on, but when i flip the screen up....nothing. Screen is dark, keyboard pressing does not illicit any responses. I have to do a hard reboot by holding down the power button to restart the computer. Unfortunately any previous data or work is lost.
I work in IT so I completed troubleshooting and also things outlined on forums in google. Reset PRAM, reset SMC and also reinstalled OSX. Still I get the same result. Fearing I purchased a defective unit, I called Apple and they told me i could exchange the computer so I dropped by the apple store and exchanged it quite easily.
I've spent hours restoring from time machine and I am experiencing the same issue on my new laptop. I'm now assuming its not hardware but more firmware related as I had to do a bluetooth firmaware upgrade when I bought the computer when I checked for software updates.
Is anyone else having any wake issues with their new MBPs? And what should I do next? Should I exchange for a 3rd unit? Thanks for you help everyone.

Powering on Macbook Pro While Connected to Cinema Display

Similar Messages

Maybe you are looking for