PowerMac 9500 System 9.1 keeps becoming "corrupted"

HELP!!! (anybody)
I have a Powermac 9500/200 with a Sonnett G3 466 upgrade card, but this problem also occurs with the original 200 MHz Apple card as well. This machine has 256 MB of ram and two 4GB SCSI drives... otherwise it is all original. This 9500 has run OS 8.1 solidly and beautifully for many years. It will also run OSX (10.0, 10.1, 10.2 using Sonnett's installer) just as beautifully... solid as a rock. Yet whenever I load OS 8.5, 8.6 or 9.1 (or 9.2.2 using OS9 Helper) it will startup once, and then on the next startup it will bomb upon the OS splash screen with an "unimplemented trap", "bus error" or "address error" system error. You can try to reboot until the cows come home and it will be the same thing each successive try. If I boot onder OS 8.1 (or OSX) and replace the OS 9.1 System and Finder files with previously backed up copies (saved upon the OS's initial booting) it will then startup in 9.1 fine... one time. the next time I go to restart it I get the same "unimplemented trap", "bus error" or "address error" system errors again. This is a mystery I would love to be able to get solved. Can anybody help? (Pleeeeeeese!)

Mark
It is seldom possible, let alone fruitful, to pinpoint the failure that causes the error message, but there are things that you can do to cover the 'persons of interest helping the police with their enquiries'.
Be sure that your System/OS installations are from 'full install' or 'retail' CDs, and not from CDs that are specific to other Mac models. Machine-specific CDs for the 9500 ended at System 7.5.3.
The cause of the unimplemented trap error is the issue of a wrong (none, or an unintelligible or garbled) instruction to the processor, whether that is before, during or after the splash screen and extensions loading. Startup Manager has handed over to System, or rather, to Finder at this point. Suspicion must fall on Finder preferences, System preferences, Finder itself or System itself, more or less in that order.
Make sure that your HDDs are properly connected and their drivers are intact—especially after the number of crashes that you have reported—for Finder's sake. Ideally each OS is on its own partition. While you are troubleshooting, drag Finders out of the System Folders to root level of the partitions for all but the OS being investigated.
Reset PRAM at startup, and after the fourth chime, hold down [shift] to disable extensions. After the message to this effect in the splash screen, hold down [command-option] to rebuild the desktop, and allow that to happen. When the Mac settles at the desktop, trash Finder preferences. Make sure that the Sonnet extension is able to load immediately after Extensions Manager by putting a single space before its name, if that is not already the case. Check that a startup volume is set in Startup Disk. Restart from the Special menu, not with the three-fingered salute [command-control-delete]. You may have to do the same for System preferences if the first time round is not successful. If even this is not effective, it is time to consider a clean installation of the OS, with all the joys of transferring third-party extensions back from Previous System Folder one at a time that that course entails.
After the successful troubleshooting or re-installation, DiskWarrior rebuild of the HDD file directory, and defragmentation of files with PlusOptimizer, will ice the cake.
Apple IIe; 68K: 11DT + 4PB; PPC: 5DT + 3PB; G3: 6DT System 6.0.8 to OS 10.4.x

Similar Messages

THE MILLION DOLLAR QUESTION: Projects keep becoming corrupted

So I keep importing my mp4 videos into iMovie (obtained by using the Activity Window method to download clips online, then converted it to mp4 using Handbrake) but every time I import a video (it is workable at first) and turn on my computer next time to start working on it, the clips become unusable. There is no playback of any sort in the playback window, no audio or picture, and while occasionally the thumbnails will be appropriate (still no audio though) they can't be used. Then other times the thumbnails turn into these gray and black things that only display a random thumbnail picture (not necessarily the proper corresponding one) when it is scrolled over. I think the videos are getting CORRUPTED but they work when played with quicktime or on my desktop and when they are initiaaly imported into iMovie. It's getting impossible to make any headway on a project when the clips just won't work. MY QUESTION: How do I prevent these corruptions from happening or once I trimmed and edited an imported video that later goes corrupt, how do I un-corrupt my carefully edited work?

Sounds like you are up against copy protection.

Printer drivers constantly becoming corrupt

We have a large mixture of HP and Ricoh printers in our environment. They are all linked through a Server 2007 Enterprise edition print server. For the HP printers, some of them do use the specific print driver and other use a universal print driver, also a mix between PCL 5 and 6. Most of the problems are occurring on Windows 7 (we don't have many windows XP and they use a different print server)and we are just starting to see some of these problems on Windows 8 (just starting to deploy). Here are the problems we are having:
1. Randomly the HP printer will stop working. Everything appears to be correct on the server and the PC and it works fine from another PC, but it doesn't appear to be communicating to the printer at all. You click Print in any application and it never actually does anything. If you just delete and re-add the printer you get problem #2. To actually fix it, you have to remove the printer, go into Print Management and delete all HP drivers (on one of the Windows 8 device just removing the one associated with the printer didn't work but removing them all fixed the issue) and telling it to redownload the print driver from the server.
2. The HP printer will randomly or on first install start printing "strange characters" and will keep printing until the job is canceled. Again we found that removing the printer and completely removing the drivers from Print Management and reinstalling the print will fix this.
These keep reoccurring with the same users and occationally new ones and we are starting to get bombarded with calls on our helpdesk. Let me know if there is something I can check to try to prevent these drivers from becoming corrupt on the PCs.
Thank you!

Hello everyone.
I understand you having software conflicts on multiple computers. So I can assist you, I need to find out what printer you have. Please click on this website to find out this information: Model Number. (Only the printers that are experiencing issues please)
On each of the computers; do they all have different connections or the same connection? Please verify if it's wireless, USB or Ethernet connection?
Once I know the connection I can further assist you on your "unable to communicate with your printer" issue.
I have a HP document that will help you resolve your issue on Continuous Pages of Strange or Garbled Characters.
Look forward to hear from you.
I worked on behalf of HP.

Windows 7 64-bit Copying files to external usb drive - files becomes corrupted.

Hi All,
I am getting intermittent problem with regards to copying files to usb external hard drive from my laptop.
When file is copied to external drive, the file becomes corrupt from the external drive.
I have to repeat around 2 to 3 times or more to re-copy the file again until file is not corrupted.
Appreciate of any help.
Below is my system info:
Using Win 7 Ultimate 64-bit 4 gb of ram.
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name GIBBY-LAPTOP
System Manufacturer Sony Corporation
System Model VGN-SR26GN_B
System Type x64-based PC
Processor Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 2267 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. R1130Y1, 8/28/2009
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name Gibby-Laptop\Gibby
Time Zone Malay Peninsula Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.97 GB
Available Physical Memory 2.60 GB
Total Virtual Memory 7.93 GB
Available Virtual Memory 6.05 GB
Page File Space 3.97 GB
Page File C:\pagefile.sys

Ok, lets be brief.
This problem is annoying me for years. It is totally reproducible although random. It happens when copying to external drives (mainly USB) when they are configured for "safe removal". I have had issues copying to NTFS and FAT32 partitions. I have
had issues using 4 different computers, from 7 years old to brand new ones, using AMD or intel chipsets and totally different USB controllers, and using many different USB sticks, hard disks, etc. The only common thing in those computers is Windows 7 x64 and
the external drives optimization for "safe removal". Installing Teracopy reduces the chances of data corrpution, but does not eliminate them completely. The only real workaround (tested for 2 years) is activating the write cache in the device manager
properties of the drive. In that way, windows uses the same transfer mechanisms as for the internal drives, and everything is OK.
MICROSOFT guys, there is a BIG BUG in windows 7 x64 external drives data transfer mechanism. There is a bug in the cache handling mechanism of the safe removal function. Nobody hears, I've been years talking about this in forums. It is a very dangerous bug
because it is silent, and many non professional people is experiencing random errors in their backup data. PLEASE, INVESTIGATE THIS. YOU NEED TO FIX SUCH IMPORTANT BUG. IT IS UNBELIEVABLE THAT IT IS STILL THERE SINCE 2009!!!
Hope this helps.

Video app becomes corrupted after streaming iTunes purchases

I wasn't sure what to use for a title here, but chose this because it captures much of what I am seeing.
Hardware:
3rd gen iPad, 32GB, iOS 7.0.4
What I am doing:
I purchase TV shows and movies from the iTunes store, but as we watch them while on the home Wifi network, there is no need to download the content to a device before viewing. Once a TV show or movie is purchased, it can be viewed in the Videos app as streaming content, much the same way that it does on Apple TV (which doesn't permanently store anything).
Key observation: I usually make these purchases through the Videos app itself, rather than going explicitly to the iTunes Store app. I am not sure this makes a difference, but it may.
What happens:
It all works well for several weeks or months. Then 3 bad things happen:
1) During this time I observe that the available space on the iPad steadily decreases (viewed through Settings -> General -> Usage). It starts with a value of approximately 12GB free space, and then declines, despite the fact that I am not storing any media files locally. After approximately 2 months, I now have 5GB free, and cannot account for the "missing" 7GB, not even close.
While it is to be expected that any streaming device must temporarily store content, that content is usually cleared after viewing or after some predetermined time interval, etc. I do not expect this content to simply accumulate endlessly.
2) Eventually, videos will fail to work properly. I will attempt to watch a purchased item, and it will run painfully slow, and may be missing audio. I check Usage, and my free space continues to decline. Subsequent attempts to view TV show and movies are now unreliable.
Big clue: shows that do not work properly cannot be deleted or downloaded locally.
3) The entire iPad becomes notably slower and less responsive running all of my usual apps (Pages, Numbers, Facebook, etc.)
What I tried that was illuminating:
I noted that under Settings -> General -> Usage, it shows the Video app as containing "No data". So, I tried downloading a different purchased video in order to guarantee that there is some data. While this video plays within the Video app, I observe that Usage still shows the Video app as having "No data", which is verifiably untrue.
Conclusion: the database used by the Videos app is failing to purge old streamed content, becoming corrupted, and now failing to report data storage to iOS.
What works:
Sadly, the only cure for this problem is a complete erase/restore of the iPad from iCloud backup. When I do this, all of my "missing" storage returns, and videos work normally. The iPad performance returns to its usual snappy self. But the cycle repeats, and I must eventually go through the 3+ hour restore process again.
This solution is 100% consistent with a corrupt database, and hence I suspect that the Video app is the culprit, consuming space until other systems are affected.
Has anyone else seen this?

I'm experiencing this exact issue on two devices:
iPhone 4S 32GB
iPad Air 64 GB
Both while running iOS 7.03 and 7.04 (recently updated both devices to 7.04 hoping it would help. It didn't)
My iPhone had become nearly unusable until I found your post. It had apparently accumulated >12 GB of "temporary streamed content", as after I did a backup/wipe/restore, I had recovered to around 12 GB free space.
It's unfortunate that the fix requires a complete reset/restore cycle, as it's very time-consuming, but thanks for providing that fix! It saved my iPhone 4S. Now I can comfortable wait until the 6 comes out to get a new iPhone.
Really, though, this seems like a critical bug for iOS devices. I'll certainly not stream any iTunes content until/unless this is fixed. I found that if I turn off "Show all Videos" in the Video App settings, it doesn't show the iTunes cloud content for streaming from within the App. This forces me into iTunes to do a full download if I want to watch something. Kind of a pain, but it beats a device that's maxed out on storage and basically bricked.

Quicktime file becomes corrupted only after transfer from a camera

I have encountered an unusual Quicktime-related problem with a customer that I cannot solve. This has been tested on two different cameras (a Kodak Zi6 and a Casio EX-Z80) to verify it is not camera related. The customer has also tested it on his desktop and laptop computers to verify it occurs on both. It must be confined to some specific piece of software he installs, because I've never run into this problem elsewhere. His two computers both run Vista.
1. He shoots video.
2. Opens Quicktime.
3. Plays the video (AVI or MOV... doesn't matter) while the video RESIDES on his camera. It plays fine.
4. Has tried taking the SD card out of the camera, putting it into his laptop, then playing the video while it resides on the card. It plays fine.
5. BUT... the moment he transfers the video file to his desktop and plays it in Quicktime, it becomes corrupted. It does play, but the image develops all kinds of blockyness and distorted colors. It becomes useless.
Any clues as to which software program he is installing that makes this problem occur? I have hundreds of other customers who use these same cameras and have no similar problem.
Thanks.
Richard

The video file is able to be transfered to the hard drive of the computer and it does play with QT, but with blockyness and distorted colors, correct? That would suggest to me video card and\or driver. The reason being if the file was not supported by QT or WMP it would not even play. QT would produce error 2048 and WMP would inform it could not handle the file. But...
I would go to the Window menu of QT player and click on Show Movie Inspector to get some info on the video file.
salaminizer, makes a good point on the possibilty of NTFS\FAT32 file systems. Right clicking on My Computer>Manage>Disk Management will show info of HD's on the computer. Some bought computers will have a back-up Partition that uses Fat32. Which the video might be being saved to.
I'm thinking video card and drivers, but on two separate computers? So find out the video codecs. It's tough unless you have the same camera or what software came with it? Let me know how you make out.

Files keep getting corrupted.

Heavily used, shared, files keep getting corrupted. Seems like StarOffice8 or Solaris (not sure which is responsible) doesn't do file locking! If someone opens the file, when it's already open, there's no indication of that! Obviously that can lead to edits being lost. However, the bigger problem is if 2 people save at the exact same time. In that case the file becomes completely mangled and unreadable!
Anyone have some solutions out there?

The Captivate version number is shown at Help > About Adobe Captivate. But you have to be quick because it's right at the top and the list of credits start's scrolling immediately. Annoys the heck out of me.
Having Admin rights to your PC is not the same as Run As Administrator on an app. It's one of the (many) changes to the Vista and Win7 OSs intended to prevent malicious software from gainin a foothold.
If you're in a corporate IT environment chances are you don't have admin rights to your PC because that prevents people from willy nilly installing apps on their own workstations. However, a good IT Support dude (who usually all DO have admin rights to everyone's computer) can usually configure the security privileges for a particular application to give you admin rights to it.
In the case of Captivate 5x and Win7, the app MUST be set up to Run As Administrator. Otherwise some things just don't work.

Files become corrupt

Windows 7 64-bit
8GB Ram
Indesign CS5.5 with all updates
FIles:
small 20,000 word book (1 single document) with no pictures, from a Word file
500 page book (1 single document), with 20 small jpgs (about 2MB total), text generated from scans/OCR, inserted as unformatted text
various copies, new/moved, new/IDML, etc. generated as tests
Problems
Several (all?) files created since 05/05 (the initial manifestation occurred almost instantly) have become corrupted. It either shows up immediately or takes around 6-8 hours
Things generally done with a mouse (click and drag to make a text box, resize a text box, copy or move text, placing the cursor to edit) become sluggish (reszing a text box could take 5 seconds to 17 minutes), jerky or sticky (click and drag a handle, release it, the frame edge might move (if and when it does) 0.125" or 6"
clicking and dragging text sometimes moves the wrong text or releases it in the wrong place
New text boxes have multiple columns although the columns setting is 1
Doing some things (e.g. click on export) cause InDesign to freeze
Failed solutions
The suddenness of the problem made me think it could be a virus--tested the Word file (noted above) and my system: found no malware of any sort
Changed the mouse: touchpad, Wacom Intuos, Logitech trackball (the Wacom tablet works 100% perfectly in Photoshop 32bit, but work only like a mouse in Photoshop 64bit--32/64 bit; drivers are current)
any attempt to go into InDesign security (as directed by a technician) fail: no permissions (my account has full administrate rights; a new admin account has full administrative rights) so whatever we could have done there, cannot be done
Exported the file as an InDesign Markup IDML, opened in InDesign
Moved content of file to new file
Creating a new file by moving or opening IDML, may not work at all, or will appear to work but the corruption re-occurs in 1-8 hours
uninstalled and re-installed InDesign
I uploaded a file to technical support. They promised to call back three different time. They did not. When I have called, they say, "24-48 hours they will call back."
Thank you for any help you can give.

OK, so, I finally got a chance to read this through this thread. Can you post a link to one of the problem documents, or email one to me?
(Sorry, I had thought you had done so earlier, but I realized I just misinterpretted something you said).
Another thing to try, of course, is testing against CS6 (8.0.0.370). CS6 does fix a number of bugs and it's where engineers do development, so it's most likely to get easily fixed in CS6 before CS5.5, and there's a not-insignificant chance that CS6 fixes your problem already.
I think your best bet at this point is to try to isolate the problem and determine what about your documents causes this problem. While getting a new version of InDesign out that fixes your problem is not going to happen quickly (if at all), figuring out how to avoid the problem certainly is doable. After all thousands of people use ID every day and don't see this.
The best start is to get a minimal document that exhibits the problems (as few pages as possible). Once there, exporting it to IDML and opening the IDML in ID to confirm the corruption survives the IDML. If that's the case, then you can unzip the IDML and inspect it (it is human-readable XML) and try to determine what is unique/special about your document.
This might be a long odyssey. Of course, my experience is that putting in the effort is more likely to get you results than letting Adobe Support do it for you, but you might have a different scenario.
I don't want to make excuses for them, but I suspect what's going on is that the support people you are talking to are waiting for the higher-level support people, or even for Engineering, and they don't have good control over the timliness of those other people. But that's not an excuse for giving you callback estimates that are not met -- Adobe seems to have a serious problem with this and I would not give them a free pass for it. It seems to happen all too often.
If you totally get stuck you could try asking for the Noida Duty Manager and see what that gets you (Noida, UP, India is the location of Adobe's support center).
But realistically, I'm not sure that is going to make engineering work any faster. Maybe it'll just make them give you more realistic estimates for calls-back...

Illustrator files with Charts in them become corrupt

I keep running into an issue where I create a file in Illustrator (some of them are detailed infographics), and if they contain a chart, such as a bar or pie chart, they become corrupt and Illustrator gives me an error "Can't open the illustration. The illustration contains an illegal or misplaced operator."
Then it opens the file, but much of it (anything below the chart) is missing. I've been able to restore *some* of my work by exporting a PDF version of the file to an EPS, but I lose a lot of my formatting. This is extremely frustrating, as I am losing hours of work each time it happens. I spoke with a customer service agent about the issue months ago, and even sent her a corrupt file, but never heard anything back.

The last time I made one of these infographics that ended up being corrupt, I saved as both an .ai and .eps. Both ended up being corrupt when I re-opened them. The best fix I've been able to find is to turn all charts into regular graphics by ungrouping them, and saving that. But it's not a great fix since sometimes, I need to go in and adjust the data later on, which you can't do if it's ungrouped.
I work from my hard drive, not a server
I use a legal version of helvetica
No plugins
I (luckily) do usually create PDFs but if there was a corrupt graphic in them, they won't open in Illustrator. I have to open in Adobe and export as an .eps, and when I open that, the text is often outlined or each line of text is a separate object.
When you say "link to another illustrator file," do you mean using the Place command? This might be possible but as you said, not very practical since with an infographic, I'll want to have multiple charts and will need to edit and adjust them on the fly, not open a different file each time then go back and forth to see if it looks right.
I don't have CS6
Basically I am really hoping Adobe comes up with a fix for this bug. I've been creating charts for a long time, but have never had this issue where the file becomes corrupt until now. And when you pay monthly for upgraded software, you expect better, not worse, performance :-/

Project Files constantly becoming Corrupt - CS6

Hi,
I need all the help I can get. Ever since I've started editing on Premiere Pro CS6 (switch from FCP7) I've constantly run into the same problem. For every single project I have worked on, at least twice the project file will spontaneously become corrupt. There are no warning signs, it just happens at random when I open the project. I end up opening one of the auot saves but will usually lose time, and I should not have to rely on these backups as an everyday thing.
I've tried everything I can think of, I've gone so far as to load new harddrives in to my system. I've done fresh install of my OS (10.8.2) and fresh installs of the Creative Cloud. We use CS 5.5 at work with no problems and I've used PPro on and off since the very first Creative Suite and have never encountered an error such as this.
I've had absolutely no problems with After Effects, Photoshop, or Illustartor. Only PremierePro
Thanks.
Here are my hardware specs:
MacbookPro (10.8.2)
2.4GHz Intel Core 2 Duo
GeForce 320M 256MB
6GB RAM
120GB SSD (Holds only OS & Software)
720GB HDD (scratch disk)
Codecs: both H.264 and ProRes at 1080/24p

The fix Adobe gave me was as follows (these are for a Mac but I'm sure archeticure would be similar on a PC)
Go > Go to Folder > ~/Library/Preferences/Adobe
Now you will see a collective of folders for whichever adobe suite you have. Go to Premiere Pro and the next folder you should have should be labeled "6.0" change that to "60_old" or some random different label. Try opening up your original project (not the recovery proj) and see if that helps.

Images are becoming corrupted.

HI, I have a PowerMac G5 circa 2005. And something screwy is happening.
But basically, my images are becoming corrupted. I'll be looking through images with Preview and all of a sudden, part of the images will turn a different color such as green, yellow, magenta...
When I save in photoshop and re-open, a line will appear in part of the image that is slightly darker or lighter.
Here are my computer settings. I am running OS 10.5.8
Model Name: Power Mac G5
Model Identifier: PowerMac7,3
Processor Name: PowerPC G5 (3.0)
Processor Speed: 2.3 GHz
Number Of CPUs: 2
L2 Cache (per CPU): 512 KB
Memory: 6.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
I few months back I changed the harddrive, so I know it probably not that. I read somewhere that I may need to replace my PRAM battery... I reset the PRAM, the problem hasn't re-occurred yet but it may just be a matter of time. Or perhaps a new graphics card... Anyone else have the same issue?
Thanks

Sounds a bit like a Video card or RAM issue.
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
If you have any temps in the 70°C/160°F range, that's likely it.
I'd replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Opening existing Word Office Pro Plus 2010 document on a new computer with Word Office Pro Plus 2010 results in *some* of the text becoming "corrupt"/garbage

The source file had this text in a section I call "LANGUAGES":
Arabic: Hello (Peach and health) = Salam-Alekum
or Salam al salad; Thank you = Shokran; Please = Men-fad-luck; Good bye = weh-don
Bulgarian: Hello = dra-vaht; Goodbye = chow-chow; Thanks = wah-go-da-rhia;
(s:Sanya, (DigitalStar/E&E Electronics, DTV converter box)
Chinese/Mandarin: Running dog (servile follower, lackey) = zougou; This = jeige (jay-gah); That = neige (nay-gah); Hello, Mr. Lin (politely) = Lin-chenzin, ne how; Thank you = Xie xie (shay-shay); You’re welcome =
boo-kai-she
Czech: Hello = ahoj (ah-hoe-ee); Thank you = děkuji (de-quoy-yeh); You’re welcome =
není zač; Good afternoon = Dobré odpoledne;
Good morning = Dobré ráno; Goodbye =
sbohem; Goodbye for now = sbohem prozatim; Yes = ano; No = ne; Yes sir = ano pane (ano paanay); Have a nice weekend = Hezký víkend!
Farsi: Havij = carrot
After making a copy of the file, renaming it, and starting to use it, I noticed the above section looked like this:
Arabic: Hello (Peach and health) = Salam-Alekum
or Salam al salad; Thank you = Shokran; Please = Men-fad-luck; Good bye = weh-don
Bulgarian: Hello = dra-vah-DÅ7¢£8¿i¾A\ÅïÕÒb·#ªp¡€^žÏM–ehÂ*á‑L[Â¥!Ü"»¿¥g©P2<©\
Y5FUƒŽƒÄœý>ù4Õ
çÂ7¬ê=Ë"i»°ù‹þñ
%¦ðèbjS¬Ö
ÈuzdºD,%z¥.-
á©ÊˆšHíÅ\kêämÝ³¡jíúSƒ©@Žu <i
b€ÕV~Y©Ó·Š€§¥[Ò]õy›Y°¹8U¾Ÿ²ää';z8©ŒN´«§6–‡0¥Ÿºns‚† ;ËÁ_$
y°hGëÀ¾-Ô9ÕÕb'_Üª~Ð4®lÍnròŒÚHðÑ–ŠZ+pT’œd0yÙDØ®±,â;QäO‘Q#¤¾šÆ™b
Íµc‡†Ý6#K–EPu¿lÉPUZC^»F+óR¯t”âx<Yñ`gëèø‑çg/Ðp“ð5ÓH˜âi'ówSÛÇ¨êÔ3úè! ˆ%vÈÂf>Õ§ÈÂ–*=ZÒ±ª děkuji (de-quoy-yeh); You’re welcome =
není zač; Good afternoon = Dobré odpoledne;
Good morning = Dobré ráno; Goodbye =
sbohem; Goodbye for now = sbohem prozatim; Yes = ano; No = ne; Yes sir = ano pane (ano paanay); Have a nice weekend = Hezký víkend!
Farsi: Havij = carrot
In another section of the source file, I had this URL to a Yahoo Finance stock listing:
http://finance.yahoo.com/q/cq?d=v1&s=RIMM%20DRR%20NDN%20GMCR%20DF%20V%20ACN%20MOS%20SHLD%20BUCY%20NTGR%20CPRT%20EEM%20DIA%20CME%20mkl%20t%20spy%20goog%20yhoo%20uis%20fnm%20ge%20ko%20MCD%20eln%20emc%20bvf%20abt%20wpi%20agn%20frx%20sfd%20amd%20cnp%20d%20ed%20eix%20celg%20qcom%20nt%20peg%20ppl%20bby%20flex%20cof%20asyt%20proxq.pk%20nok%20fe%20sns%20ibm%20spg%20wlp%20bfly%20brka%20brkb%20zmh%20cmi%20kg%20vrx%20amt%20twx%20ctxs%20sgp%20dox%20cmvt.pk%20elx%20xel%20aapl%20amzn%20jpm%20bsx%20mdt%20duk%20se%20csco%20jnpr%20dell%20ebay%20lly%20hpq%20hurc%20intc%20inin%20lvlt%20mck%20msft%20onb%20orcl%20scln%20smtk%20wmt%20tgt%20brwix%20obehx%20qqqq%20ssdsx%20csvfx%20scdgx%20ktcsx%20t%20obhex%20slafx%20sjpnx%20scinx%20a%20adsk%20alu%20arba%20atahq.pk%20coms%20palm%20rwc%20vrcc.ob%20dis%20ila%20novl%20utmd%20rprx%20nrom.ob%20obehx%20obhgx%20obfox%20sctgx
In the copied file, it now shows this:
http://finance.yahoo.com/q/cq?d=v1&s=RIMM%20DRR%20NDN%20GMCR%20DF%20V%20ACN%20MOS%20SHLD%20BUCY%20NTGR%20CPRT%20EEM%20DIA%20CME%20mkl%20t%20spy%20goog%20yhoo%20uis%20fnm%20ge%20ko%20MCD%20eln%20emc%20bvf%20abt%20wpi%20agn%20frx%20sfd%20amd%20cnp%20d%20ed%20eix%20celg%20qcom%20nt%20peg%20ppl%20bby%20flex%20cof%20asyt%20proxq.pk%20nok%20fe%20sns%20ibm%20spg%20wlp%20bfly%20brka%20brkb%20zmh%20cmi%20kg%20vrx%20amt%20twx%20ctxs%20sgp%20dox%20cmvt.pk%20elx%20xel%20aapl%20amzn%20jpm%20bsx%20mdt%20duk%20se%20csco%20jnpr%20dell%20ebay%20lly%20hpq%20hurc%20intc%20inin%20lvlt%20mck%20msft%20onb%20orcl%20scln%20smtk%20wmt%20tgt%20brwix%20obehx%20qqqq%20ssdsx%20csvfx%20scdgx%20ktcsx%20t%20obhex%20slafx%20sjpnx%20scinx%20a%20adsk%20alu%20arba%20atahq.pk%20coms%20palm%20rwcþØ9—=t‡†|¤wžÌèûÛÌo¯€[Ú
A?Eç3îÕ|¶9¯^¡‰
ðcU|-ãŠ·Ì,ùÎ±»ÏALŒ{7Ÿ
^ú–g[-ìã˜ëzn_>2æÊ0®„Ý
5ç )¥á5Ñ7Ò-;FEØ×ßõ$ýûÚ%ù;6ÿ´¦Gø
Anyone have any ideas on what is causing the corruption and how to prevent it?
BTW, if I re-copy/paste the corrupted section from the source file, it appears correct...for awhile...and, then, later, I'll notice that it has become "corrupted" again. I have *not* compared various corrupted sections
to see if the corruption texts are identical each time.
Michael

Thanks for the reply, Melon.
I disabled the only 2 Add-ins that were present - [COM Add-Ins > Sharing Add-in for Microsoft Lync 2010] and [Actions > Instant Messaging Contcts (English)].
This did not fix the issue. After they were disabled (and they currently still are), I copied back un-corrupted text from my good source file and the text at the end of the document has become corrupted again. Except for the ][Languages] section,
which is much further up in the document, the corruption seems to be consistenly near the end of the document.
I tried to highlight some of the corrupted text and change font, as suggested, and the text just becomes corrupted text in the new font. :-)
I notice that, if I start selecting text (starting from a paragraph mark above the corrupted text - I always keep hidden formatting symbols turned on), as I "arrow down", the "selection" includes lines in blocks lower down -- that is, the corrupted text is
repeated down the page.
Since this may not make sense, I'd be glad to upload samples of the good, original, source text and the corrupted "versiion" of it.
I still need to test the file on one of my computers at home.
Thanks.
Michael

Saying the file for my Iphoto app has become corrupted. Never backed up the file, So now what?

Every time I try to open up my IPhoto app I keep getting a pop up message saying the file for my iPhoto app has become corrupted and needs to be restored from back-up. The problem is I never backed it up. and if by slim chance I did but can't remember for some reason I can't find the back-up file on my Mac Book pro. Any recommendations as to how to proceed would be greatly appreciated. Thank you in advance

This is a good lesson for all of us. Having only one sets of files without a backup is a ticket to disaster. I know several folks who lost all of their photo library when the hard disk on their computer died. It's shame. Those files that are important to you should be saved in at least one different location than just on your computers hard drive. Its even better to keep two backups.

Disk image become corrupt after copied to portable hard drive

Every time I copy a .DMG image to my portable Hard Drive it become corrupted; and when I try to open the .DMG I get the error "Image Data Corrupted". I have formated the drive several times, I tried OS X Journaled, Fat32, both with GUID and MBR. I have verified and repaired the hard drive in disk utility but I am still getting this error. I am running 10.8.2.

Burn a Repair CD to boot from:
http://www.howtogeek.com/howto/5409/create-a-system-repair-disc-in-windows-7/
After booting from it try the restore from Image:
http://www.howtogeek.com/howto/7702/restoring-windows-7-from-an-image-backup/
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

My ipod keeps getting corrupted and I have to reset it

My ipod keeps getting corrupted, and I have to keep resetting it. I have owned four ipods. Yes that's right. Four. I have been returning them but every single one does this. It is the same every time. I press the middle button when "Music" is selected, and the device completely shuts off when I do this and goes to the Apple icon. If I press play, then it will play songs, but only at random, and I cannot access my playlists. I have to reset the ipod to fix this problem. What's going on with this?
ipod Nano Windows XP

Im not sure EXACTLY what would cause this, but if you have had 4 nanos do the exact thing, its either a issue with the nanos being sold at the place your getting them at, like the local store in your area, or its a issue with your PC. I know some people report a issue with a certain malware program that sneaks on there system and causes havoc with the iPod service and in turn causes weird things with there pod.
The iPOd Service is a program that runs in the background of windows and, in basic terms, acts like the "Middle guy" translating things from the PC to the pod.
Scan your system for any viruses with a antivirus program and scan for malware with Ewido http://www.ewido.net/en/download Then download install and run the latest iPod updater on your nano here http://www.apple.com/ipod/download/

PowerMac 9500 System 9.1 keeps becoming "corrupted"

Similar Messages

Maybe you are looking for