Powermac Firmware would not install

I downloaded the update featured here:
http://www.apple.com/support/downloads/powermacg5late2004systemfirmwareupdatefor macosx1043.html
I have 10.4.4 installed right now and when the installer reaches the step in which to choose which hard drive to install the update, it errors saying that the hard drive selected must have 10.4.3 or higher installed (which I have)
With 10.4.4, is the update no longer needed?
Thanks for the help.

Anthon if you are unable to validate your software on the new Mac then it is likely due to a connection error. Please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection error.

Similar Messages

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

I downloaded newest itunes version and it would not install properly and now i can't open it. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. anybody having this problem.

i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

BootCamp made for Windows Vista would not install in WIndows 7

Hi,
I am trying to install Bootcamp drivers on Windows 7 with the Mac OS CD that came with my Intel-based iMac. The problem is that I bought my iMac when the latest Windows was Vista, and it would not install on Windows 7. The Bootcamp drivers for Windows 7 on Apple Support pages are "UPDATES" that require BootCamp 3.0 already installed in Windows. However, I cannot install BootCamp 3.0 in the first place, because it would be installed only on Vista. What should I do to have BootCamp installed on my Windows 7 so that I can set the default booting OS to be Mac OS again?

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Boot Camp: Installation and Storage
Dah•veed

Officejet Pro 8600 N911g new firmware will not install.

My printer: Officejet Pro 8600 N911g
Current Firmware: CLP1CN1416AR
My problem: Downloaded the latest firmware update (Version CLP1CN1322CR). When I go to install it, my printer shows as listed, but in the STATUS cloumn, it is listed as "Not applicable".
I turned my printer on/off.
I tried updating via network, and when it checks for an update, it states there are no updates avaiable.
I tried updating via USB.
I tried updating via the LCD panel on the printer, and when it checks for an update, it states there are no updates avaiable.
Is there something wrong as to why this current firmware will not install?
Thanks for any help.

New Firmware (CLP1CN1416R) was installed automatically (Printer was set for "Auto Update"). Prior to new firmware install, printer has performed flawlessly...no problems. Immediately after printer updated it's firmware automatically I began to have multiple problems.
First, it kept asking me to perform an "Alignment" which I dutifully performed only to have message come back that 'Alignment Failed". Printed sheet looked fine, and printer printed fine but now before any page will print the "Alignment Recommended" message comes up which I have to then override (Click 'Do Not Align' button at bottome of 'Alignment Recommended' message box. This is getting really OLD!! Simply unacceptable for a business class printer!!
Also, the printer randomly has started giving other messages such as "There is a problem with the printer or ink system" AND "Cartridges are Missing" ("when I've just recently put in new catridges and levels are OK!!) AND "Paper Jam" (when there is no jam!!)
None of these problems have occurred prior to the automatic firmware update. I believe the reason HP hasn't posted the new firmware update to their Customer Service website is that they know there are bugs in it and don't want to compound the problems the new version has already created. I seriously question why an automatic updating of firmware was done with equipment set to "Auto Update" and yet that same new firmware is not available to those who might have had their printers set for "Manual Update".
HP Customer Service - You need to issue a statement from the company as to what has happened with this firmware update. If there are problems, take responsibility for it and make it right. HP knows who it sent out auto updates to. These printer owners should be immediately notified and the situation made right. It is not real assuring to have your front line staff not know why the new firmware is not on the website. I do not like the idea of having to pay for a Support Call when the problems with my out of warranty printer are directly tied to the Auto Updating of said printer with apparently defective firmware.
I'd really appreciate a response back from someone in HP Customer Service.

Moved Itunes to an external drive. When prompted to update versions, the download would not install, now I get an error message indicating file msvcr80.dll is missing.

I moved my ITunes to an external drive. Whe I was prompted to run the update for a new version of Itunes, It downloaded but would not install. now when opening Itunes I get an error message indicating the file msvcr80.dll is missing. How can I restore this, and e

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I attempted to download ITunes up date 11.1.4 and it would not install. Got two error messages, error 7 windows error 126 an "privileges. Also meesage that msvcr80.dll was missing. Would like help.

I attempted to download itunes up date 11.1.4 and it would not install. Received the following error messages: error 7 windows error 126 and "privileges. Did uninstall itunes , but could not ger new download. What do you suggest?

Hello, Jack.
You will find this article helpful in troubleshooting the error that you are receiving.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Regards,
Jason H.

Upgrade would not install (3.6.8) error message Licence file for this version could not be found

The latest upgrade 3.6.8 downloaded but would not install. Error message read "the licence file for this version could not be found.". Visit Firefox homepage for more info
== I tried to install the latest Firefox upgrade. Have tried about 6 times

It can also help if you delete the Firefox program folder (C:\Program Files\Mozilla Firefox) before installing a new full Firefox copy.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that are locked in any way.
You can skip the step to create a new profile, that is not necessary for this issue.

HT5022 Airport Utility 5.6 would not install

Airport Utility 5.6 would not install on my MacBook Pro with 10.7.5 (Lion): "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance." Hello, Apple?

Use the workaround described in this thread: How do I configure an Airport Express when I get this message in Airport Utility? "This version of AirPort Utility doesn’t support this base station."
Pay attention to the caveat in the final paragraph, restated here for emphasis:
Keep in mind that Apple's decision to abandon support for your original AirPort Express was for reasons known only to them. Remember that you are using obsolete equipment, should some future OS X feature not work for you.

Premiere pro would not install

I subscribed to adobe premiere pro, but it would not install on my computer. I got a new computer. How can I download it to this one?

What are your computer specs?
Exactly what happens when you try to install?

NEED HELP ADOBE READER WOULD NOT INSTALL. STATES "ACCESS DENIED"

ADOBE READER WOULD NOT INSTALL. STATES "ACCESS DENIED"

Hi dharamsishah,
Are you still facing this issue?
The computer you trying to get Reader installed on it. Is it your own computer or work computer?
It seems you might not have permission to install application.
You may try to create a new user profile with admin rights and then try installing again.
Regards,
Ajlan Huda.

Office jet 4500 would not install by their directions on web on Mac computer.

I just talked with support for HP. They wanted $25.00 to fix my problem because my software update on Mac to Maverick made my cd obsolete. Driver would not install correctly by following their web instructions. Neve buy another HP product

Hi,
Kindly go to this link and see if you can download the drivers for your printer
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r...
Select the OS from the dropdown menu and check it out
Thanks
I am an HP employee, these posts are according to my knowledge and HP is not responsible for it.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution
I work for HP.

I am on Windows XP. Updated to latest iTunes but it would not install. Tried again and the system hung. I did a restart and iTunes had completely vanished from my system. Tried to do a new install but it won't finalise. Can anyone offer any suggestions?

I am on Windows XP. Updated to latest iTunes but it would not install. Tried again and the system hung. I did a restart and iTunes had completely vanished from my system. Tried to do a new install but it won't finalise. Can anyone offer any suggestions?

OK, lets do a complete overhaul to make sure it's working ok.
First to check your Windows system file for any corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer.
Start iTunes and see if it is ok.
If it doesn't, will have to go through the whole process of uninstalling and installing acccording to the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
(Referenceinstructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components)
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Carbon X1 2014 - New Touchpad firmware will not install

Hi,
Becuase of the very fiddegy Touchpad on my new Carbon X1 2014 (20A8) I was looking forward to installing the new firmware update realeased 19 Aug 2014, becuase it should address some of the annoying issues I have with the touchpad.
According to the readme file, my computer is supported, but when I run the SynReflash.exe to upgrade, I consistently get this message back: "Reflash cannot find firmware updates for the devices on this system".
What's wrong here?? Can you help?
PS. Running Windows 8.1 Update 1 (x64). The UltraNav driver (18.0.7.40) is installed and working, even though I have to disable all gesture support to get a somwhat predictable mouse action when using the touchpad.
Some help would be great.
Thanks.

I would like to have a response in this forum from Lenovo. We are more people with touchpad problems and issues with installing the latest firmware update for the Synaptics 'pad'.
I checked the version of the touchpad and it's: TM-2937, FW 1581359.
Is the firmware update not designed to work with this touchpad in my Carbon X1? If not, then why is my X1 (20A8) listed as a supported device in the firmware text file???
Some help or clarification please.....
Thank you.

ITunes would not install correctly with the latest update on my computer and laptop and gave an error of some kind. Now the earlier version will not work when recovered and I have no iTunes at all on either computer. Help?

I tried to update iTunes with the latest release and it screwed everything up on my desktop (Windows 7) and on my laptop (Windows Vista) giving error messages related to runtime error, etc. Tried to recover previous version and it would not recover fully. Now have no itunes on either computer and it will not install properly or open after quasi installed. Help please

Howdy LarrySfromTX,
The following article provides steps that can help get iTunes back up and running.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen

Powermac Firmware would not install

Similar Messages

Maybe you are looking for