Powermac g5 w/ dual displays/

im using a sony lcd tv klvs23a10 and a crt monitor, after the computer is turned off for a while and i turn it back on the resolution on the sony goes to 800x600 and in the display preferences the sony is not detected, then i hit detect displays and back to normal . any info please

I have had this happen too...
If I shut off the monitor, occasionally it will resize, maybe 10-15% of the time, but it seems only to be when the screensaver is not activated. It never seems to do that if I run the screensaver even if the monitors are shut off..
maybe it helps....

Similar Messages

Dual Displays on PowerMac PPC dual 1.8ghz

Hello Mac users,
I have been trying to set my PowerMac PPC G5(vintage 2004) for dual displays.
I have two Apple cinema displays, either one will connect to the back of my computer via the ADC. The connector in the computer is an 18 pin (with funny jumper) female receptacle. It follows that the ADC on the display is 18 pin (with funny jumper) male connector. One of my monitors is brand new.
I am using a Radeon X800XTC card that has one ADC (female receptacle) and one DVI connector (also female).
Is this possible?? I did order what Apple told me would work, the DVI to ADC adapter, model M8661LL/B. I could not use this item on my system, as it comes with the exact opposite sex for the connectors! Also the Belkin adapter is the wrong sex as well.
Any ideas on how to connect two displays to this video card?? It is an AGP version.
Thanks,
eholz1

Hello Guys,
Thanks for the info on this. I did figure out what MY problem was. Due to the info you gave me,
I took another GOOD look at my computer, to see who was connected to where!
The displays I have use the DVI port on the video card. I took a good look at the other port on the computer (dummy that I am!). This is the empty port, which HAPPENS TO BE THE ADC (Apple Display Connector)! So I have finally awakened! I do have the correct cable to go from the ADC to the DVI.
So, now all is well, but I do feel pretty stupid confusing the DVI connector for the ADC. I assumed that the connector in the monitors was ADC, and denying the fact that they did not have 30 pins, etc!
Thanks for the help.
eholz1

Another dual display problem - GeForce FX 5200

I've seen lots of questions about dual display problem, situation when trying to connect two non-apple vga displays to your graphic card.
I have GeForce FX 5200 graphic card, with 2 display output's. And two DELL 17" vga LCD displays.
I manage to connect 1 display regulary with dvi to vga converter, but for other display I tried several difrent converters ADC to DVI to VGA, and it just did NOT work.
G5 could see other display in display settings, in arrange option I coud see two identical displays, but I don't get anu picture (desktop) on other display???
Is it problem with output's on my graphic card (Gforce FX 5200), could it be soloved with some ADC to VGA converter?
P.S. Dr. Bott ADC VGA Extractor is not compatible with GeForce FX 5200????
G5 dual 2.1Ghz Mac OS X (10.3.4)

I've seen lots of questions about dual display
problem, situation when trying to connect two
non-apple vga displays to your graphic card.
I have GeForce FX 5200 graphic card, with 2 display
output's. And two DELL 17" vga LCD displays.
I manage to connect 1 display regulary with dvi to
vga converter, but for other display I tried several
difrent converters ADC to DVI to VGA, and it just did
NOT work.
This won't work if the ADC to DVI adapter is not passing through the analog signals needed for VGA.
G5 could see other display in display settings, in
arrange option I coud see two identical displays, but
I don't get anu picture (desktop) on other
display???
Is it problem with output's on my graphic card
(Gforce FX 5200), could it be soloved with some ADC
to VGA converter?
Yes.
P.S. Dr. Bott ADC VGA Extractor is not compatible
with GeForce FX 5200????
It should work. On Dr. Botts web-site it says:
"VGA Extractor is compatible with any video card with an ADC port in a PowerMac G5"

Dual Displays (Fooling Keynote)

I read something online and I can't find it anymore. What I'm looking for is how to "fool" my Powerbook and Keynote into thinking I have dual displays so I can test out my presentation's presenter options.
I know it had something to do with attaching the dongle, changing the System Preferences and Keynote Preferences. I also remember that things had to be done in a specific order. I have tried a few combinations, but none of them work. I've also searched the web with not luck.
Does this ring a bell with anyone?
I'll be presenting Monday morning at a convention from my laptop with a projector that will be set up in my classroom. Unfortunately, I won't be able to practice until 1 hour before my presentation.
Thanks!
renee
Powermac G5 & Powerbook 15" Mac OS X (10.4.8)

Welcome to the forums, renee.
Do you have Keynote 3? If so, simply go to the View menu and choose "Rehearse Slideshow". That view will let you see the show as if you are viewing the Presenter Display.

Powermac digital audio two displays

with a ATI RAGE 128 Pro graphics card, the one standard on the digital audio powermac. it has the ADC connection and a VGA. does that card support dual displays? would you be able to connect an apple studio monitor to the ADC port and also power a VGA monitor?

Hi, Alarkia -
The original ATI RAGE 128 Pro card does not support two monitors. It is designed for one monitor, but comes with two different connectors to facilitate connecting different kinds of monitors.
Adding a second monitor to that card is not a good idea - best case, the second monitor will mirror the first; worst case, the card will fry.
You can replace the original AGP card with a newer one which is dual monitor capable; or add a PCI card in an available PCI slot to support one or more additional monitors. Doing this will also allow the additional monitor(s) to be used in extended-desktop mode.

Wacom tablet on dual display dual card setup...

...and the cards are as follows, one Geforce GTX 460 (nvidia driver), one Radeon x1650 (radeon driver) As such, I have to use Xinerama and not RandR for my dual display setup. I have configured the driver to use my main display (Dell CRT on GTX 460) and the cursor shows up where it's supposed to, but when I draw, the cursor "splits" into two, the actual cursor, and the drawing cursor. The regular cursor moves as if it's on my main display, but the drawing cursor spans both desktops.
I've tried all kinds of things to make it work, no luck though.
xsetwacom set "Wacom Graphire4 6x8 stylus" Area 0 0 30408 12064
xsetwacom get "Wacom Graphire4 6x8 stylus" MapToOutput HEAD-0
Both of those commands produce the same result, which is shown in the video below.
xorg.conf
http://pastebin.com/d0TSwNrR
And a lovely video showing what I mean.
http://www.youtube.com/watch?v=YMGGehD81jM
Any help would be lovely.

MisterAnderson wrote:Honestly no clue how to help you, but I am interested in your setup. Are you using the proprietary drivers for your nvidia card and the opensource radeon for your ati? How did you get this setup working? I've been trying for ages!
If I remember correctly, I just used --nodeps and maybe --force when installing the nvidia driver, that way it didn't force me to uninstall the radeon driver when I install the nvidia driver. Then, look at my xorg.conf. there's no acceleration of any sort on the ati card, but I can use it for terminals and browser windows, text editors and the like. Can't watch flash videos on it though, and I don't think mplayer works on it either, I'm not at my arch box atm, so I can't verify that.
Also, as mentioned in my opening post, no composting either. The same setup works pretty good in Ubuntu with a similar config, but no compositing there either, Unity clones 1680x1050 of my main 2048x1536 display, can't split the desktops, and I just end up using Xfce4 because it handles Xinerma pretty well.. I have to turn off the compositing extension in the config on arch to get X to even start up.
:edit:
back in arch, should note that whenever I install a new package, I receive this warning. Everything still works tghough as I describes. And back on topic, anyone have any clue as to why my tablet behaves this way?
missing dependency for ati-dri : libgl=8.0.4
Last edited by RexMcLess (2012-10-02 19:58:03)

Highest dual display resolution for mac mini mid 2011

I am currently running a mac mini mid 2011. As I've understood (according to the below statement). Am I only able to use 2 secreen with 1920x1200 or could I use one screen with 2560x1600 and one with 1920x1200. I do NOT want mirroring, only dual displays.
I am going to connect the screens in the following way:
1x mini-dvi - HDMI to one screen.
1x HDMI - HDMI to the other screen.
Display Support:
Dual Displays
Resolution Support:
1920x1200*
Details:
*This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapterand 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
Thanks in advance
Rich

According to the copy&paste from wikipedia, HDMI should support higher resolution than 1920x1200. So the question is, does it aupport that on the mid 2011 mac mini. It says in the specifications
"Mac mini is designed to work with HDMI devices that comply with versions 1.0, 1.1, 1.2, 1.2a, 1.3, 1.3a, and 1.4 of the HDMI specification."
That should mean it should be able to support it, but I don't know : <
HDMI version
1.0
1.1
1.2
1.3
1.4
2.0
Date initially released
December 9, 2002
May 20, 2004
August 8, 2005
June 22, 2006
May 28, 2009
September 12, 2013
Maximum clock rate (MHz)
165
165
165
340
340[109]
600
Maximum TMDS throughput per channel (Gbit/s) including 8b/10b overhead
1.65
1.65
1.65
3.40
3.40
6
Maximum total TMDS throughput (Gbit/s) including 8b/10b overhead
4.95
4.95
4.95
10.2
10.2
18
Maximum throughput (Gbit/s) with 8b/10b overhead removed
3.96
3.96
3.96
8.16
8.16
14.4
Maximum audio throughput (Mbit/s)
36.86
36.86
36.86
36.86
36.86
Maximum color depth (bit/px)
24
24
24
48[a]
48
Maximum resolution over single link at 24-bit/px[b]
1920×1200p60
1920×1200p60
1920×1200p60
2560×1600p75
4096×2160p24
4096×2160p60
Maximum resolution over single link at 30-bit/px[c]
N/A
N/A
N/A
2560×1600p60
4096×2160p24
Maximum resolution over single link at 36-bit/px[d]
N/A
N/A
N/A
1920×1200p75
4096×2160p24
Maximum resolution over single link at 48-bit/px[e]
N/A
N/A
N/A
1920×1200p60
1920×1200p60
Maximum 3D resolution (using a full resolution 3D format) over single link at 24-bit/px
N/A
N/A
N/A
N/A
1920×1200p60

How do I use dual displays to have a full screen app on one monitor and another full screen app or the desktop on the other?

How do I use dual displays to have a full screen app on one monitor and another full screen app or the desktop on the other?
I want to have my itunes visualizer on my TV which is connected via HDMI adapter, and still have access to full screen itunes and my desktop on the main display.
Any suggestions? App downloads that can do this? Please let me know.

You can't do it. This has been an issue since Lion.

Dual display color and other related issues...

I have posted this on painter forums, though some of the issues coming together here are directly related to issues w/ Snow Leopard and dual displays. Thought I would try here....
This is so bizarre. When I ever I run P11(I think this is going on in P10 too?) w/ the OS X (snow leopard, 10.6.2 on quad core Intel Xeon Mac Pro, 10 GB of RAM) menu bar on my Eizo(making it the main display), and the Apple Cinema display left as the #2 monitor, I get very annoying brush cursor artifcats left randomly on the Eizo screen after strokes. One cannot predict when the cursor will leave it's gray "marks", but it will do it, sometimes 5 strokes in a row, sometimes after 15 strokes or so? If I move my brush back over them, or change the image percantage view, they vanish, obviously new ones coming back, as I work.
However I put the OS menu bar on the AC display, yet work back on the Eizo, this does NOT happen. No cursor artifacts. Well, at least I can summon the issue
The reason I am doing this is Snow Leopard has bad color issues w/ dual displays (well documented, much to Photoshop CS4 users frustrations, and mine). Apple needs to fix it... but for me to see the right color on the Eizo(this is my main color and superior display), it needs to be the main monitor(menu bar) in 10.6.2.
So, you can see my trap - Accurate color, or annoying cursor artifacts left on the screen (sorry, it really bugs me as I work) as I work in Painter.
Attempted fixes: Trashed all of Painter's prefs, all of Wacom's Intuos 4(latest driver) prefs and software, switched plug ins on the back of the mac for the displays(lots of restarts), ran cache cleaning Cocktail and DiskWarrior, etc. -- no change, as I can duplicate the issue w/ the above set up. A sidebar or maybe be very related note: I have an iMac w/ max amount of ram (model not very old -- maybe 1 or 2 old) and I have had a long standing issue working on the iMacs we have had w/ this brush cursor artifact problem (in Leopard and Snow Leopard). I am on one monitor w/ the iMac, so you know here the menu bar is...hmmmmmmmm.....?
Thanks!, T

I have posted this on painter forums, though some of the issues coming together here are directly related to issues w/ Snow Leopard and dual displays. Thought I would try here....
This is so bizarre. When I ever I run P11(I think this is going on in P10 too?) w/ the OS X (snow leopard, 10.6.2 on quad core Intel Xeon Mac Pro, 10 GB of RAM) menu bar on my Eizo(making it the main display), and the Apple Cinema display left as the #2 monitor, I get very annoying brush cursor artifcats left randomly on the Eizo screen after strokes. One cannot predict when the cursor will leave it's gray "marks", but it will do it, sometimes 5 strokes in a row, sometimes after 15 strokes or so? If I move my brush back over them, or change the image percantage view, they vanish, obviously new ones coming back, as I work.
However I put the OS menu bar on the AC display, yet work back on the Eizo, this does NOT happen. No cursor artifacts. Well, at least I can summon the issue
The reason I am doing this is Snow Leopard has bad color issues w/ dual displays (well documented, much to Photoshop CS4 users frustrations, and mine). Apple needs to fix it... but for me to see the right color on the Eizo(this is my main color and superior display), it needs to be the main monitor(menu bar) in 10.6.2.
So, you can see my trap - Accurate color, or annoying cursor artifacts left on the screen (sorry, it really bugs me as I work) as I work in Painter.
Attempted fixes: Trashed all of Painter's prefs, all of Wacom's Intuos 4(latest driver) prefs and software, switched plug ins on the back of the mac for the displays(lots of restarts), ran cache cleaning Cocktail and DiskWarrior, etc. -- no change, as I can duplicate the issue w/ the above set up. A sidebar or maybe be very related note: I have an iMac w/ max amount of ram (model not very old -- maybe 1 or 2 old) and I have had a long standing issue working on the iMacs we have had w/ this brush cursor artifact problem (in Leopard and Snow Leopard). I am on one monitor w/ the iMac, so you know here the menu bar is...hmmmmmmmm.....?
Thanks!, T

Possible to do dual display with a mini?

I have an early 2008 Mac mini (Intel) - with the standard DVI connector; using the supplied DVI/VGA adapter to connect to an LCD monitor.
I'm just wondering if it is possible to use two displays with this model and if so, how do I connect the second monitor?

Several ways of doing it in this thread:
http://discussions.apple.com/thread.jspa?messageID=8335705&#8335705
If you want to go the usb route, see also:
http://eshop.macsales.com/item/Other%20World%20Computing/VIDU2DVIA/
Be sure to examine the limitations of each method.
(I'd also consider that your 2008 Mini likely has substantial resale value and that you might prefer getting a 2009 Mini which natively supports dual displays.)

Mac Mini (mid-2011) dual display with extended desktop

Can Mac Mini (mid-2011) dual display different picture on HDMI TV and DVI monitor. I can only get it to mirror and not display different programs or extended desktop. Can i "extend" instead of "mirror"? and how

Hi David it should...
Display Support:
Dual Displays
Resolution Support:
1920x1200*
Details:
*This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapter and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
Are you using splitter maybe?

Dual Display on Mac Mini

Hi there,
I want to have a dual display setup with my Mac Mini. There's also a twist. One of the displays is a regular monitor. The other display is a 46" TV. I am not too technically minded - is there a splitter or some kind of dual display "kit" I can pick up?
Thanks!

Which Mac mini? The new one has two video outputs on it, so two displays is not a problem.

Dual Displays and Windows XP

Hello,
I have a MBP with the Radeon X1600 graphics card. Under OS X I can run dual displays without a problem, either extended or mirrored. Using Bootcamp to boot to Win XP, I can only get the 2nd monitor to run extended, I can't get it to run mirrored. What really drives me nuts (short trip) is that I have run it in mirrored mode before when I teach. I go to the Display dialog box and "see" both monitors, but the only way I can get anything now on the 2nd is to run extended? I could update Radeon driver on the Windows side, but I thought BootCamp took care of that and I don't want to mess up my laptop?

It is definitely best to reinstall anytime you make a major system change. You will have to do at least a windows repair although I am not sure if it will fully enable the dual core.
Good Luck
Jeremy

Dual Display - help with Cinema Display for MacBook Pro where MB won't detect displays.

I just got a Cinema Display (a1081 20") ("CD") off eBay to use as a dual screen with my Macbook Pro OS X 10.6.8 ("MB"). However, I can't get MB to recognize CD! I've tried power cycling both the MB and the CD with and without USB cord connected. MB won't recognize CD display in any situation. However, it is recognized in some capacity although I can't use dual display because the CD power button triggers MB to ask me if I want to restart, shutdown, or cancel.
Any help is appreciated!!

Have you tried smc and pram resets?
Try Detect Displays in the Displays preference pane.
Does the Displays preference pane Arrangement show two screens? If so do click gather windows and check the resolution setting of the new screen.

Dual Display, 2 Monitors - Extended Desktop

Hello Everyone:
There isn't a clear cut answer or solution in connected a Macbook Air to 2 external monitors in an attempt to create an extended desktop. I have read older posts that it's either doable or not doable. My questions are the following:
-Is it possible to connect a new Macbook Air to 2 external monitors for extended desktop purposes?
-Some users have reported lag issues (mouse dragging , delays, etc.). Will this happen for sure with a Macbook Air or is it a monitor issue?
-What's the best non-Apple monitor brand that would work best with a Macbook Air for dual display purposes? I've read that Dells have a problem in this regard.
-What would be the advantage or disadvantage of using a dock station in setting up a dual display environment? Would this add to the lag, latency factor?
I'm thinking of investing in a new Macbook Air, but I want to make sure I dont end up with silly issues - such as latency, monitors, etc.
Thank you for all your help and advise.
Best,
G.

Yes, extended desktop works with monitors set to differant resoultions. the Monitors pref pane allows you to select relative arrangements and rez of all monitors composing the extended desktop.
personally I run a dell CRT at 2304 X 1728 @ 60Hz along with an NEC 6FG a 2048 X 1280 @ 60Hz off a radeon 9800pro on an MDD.

Powermac g5 w/ dual displays/

Similar Messages

Maybe you are looking for