Powermac G5 will not FTP out!

Hi, can anyone save me £35 because my Powermac G5 will not FTP out!
Why?
What switches on/off?
I want to upload site but cannot connect to the server!

Hi 3dismyname,
I can't save you any money, other than pointing you toward terminal also. But I did start my own thread concerning Apple's implementation of the ftp protocol in the finder, and it's limitations a while ago .
Here's a link to the thread. Please follow our advice and report this as a bug to apple if you could take the time to do so.
Thank you
G4 MDD Dual 1.25   Mac OS X (10.3.9)  

Similar Messages

  • PowerMac G4 will not connect to the internet via ethernet

    I am normally a very mac savy person, but I cannot get this to work...
    I have an Airport Express connected to speakers, a USB printer and an ethernet hub, which is connected to a cable modem and also a PowerMac G4 via ethernet. There is also a wireless iMac thrown into the mix. All hardware has up-to-date software.
    The wireless iMac gets online, prints and plays music wirelessly.
    The wired PowerMac G4 will not connect to the internet via ethernet, it is killing me.
    I have gone through all the settings and cannot figure this one out. I really appreciate all advice.
    Thanks,
    G4   Mac OS X (10.4.8)  

    Hi pradagirl,
    Welcome to Apple Discussions!
    Leaving the other peripherals out, tell us the connection sequence from the G4 outbound.
    Also, you might gain more insight at the Networking Forum
    Regards,
    John
    G5Dual 2Ghz  23" ACD  iSight   Mac OS X (10.4.8)    20" Intel iMac 

  • My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    Hey erinoneill24,
    Thanks for using Apple Support Communities.
    Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
    iPod displays "Use iTunes to restore" message
    http://support.apple.com/kb/ts1441?viewlocale=it_it
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
    If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
    Have a nice day,
    Mario

  • HT1414 my iphone 4 running on IOS 5 will not come out of recovery mode and gives the error code -1. Can any one help me please because i've been without a phone for 2 weeks and still not getting anywhere.

    Hi there could someone out there please help i've got a Iphone 4 running on IOS 5 and it will not come out of recovery mode> It comes up with the error code -1 which i've looked everywhere on the web but no one seams to have the same issue.
    This is a reconditioned replacement phone from the apple genius guys which i paid £130 for and only got 3 months warranty with and as soon as the warranty run out it crashed on me and never been able to get it back out of recovery mode. I've been back to the apple genius guys and they have told me there's nothing they can do other than charge me £130 to take the phone off me and give me another reconditioned phone with a 3 month warranty. Which as you can properly tell i dont want to.
    PLEASE PLEASE HELP ME thanks for your time

    This is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.

  • Ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help

    ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help and my itunes will not see that its connected. i also tried going though control panel and restarting the service and nothing happens. also i tried redoing the driver but its saying it cannot find any drivers for it

    lol ok nvm i fixed it

  • OS Windows Vista Ultimate - HP LAser Jet 1000 - Firefox will not print out internet page etc...

    OS Windows Vista Ultimate - HP Laser Jet 1000 - Firefox will not print out internet page etc...
    That simple, find an page you want to print, hit the print button and zero zip zlich.
    Works just fine with IE?????

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • HP LaserJet P3005x will not come out of sleep mode

    Printer will not come out of sleep mode (after being in sleep mode for an extended period of time (over 24 hrs)).  When this happens, I can not ping the printer and pressing any of the buttons on the printer will not bring it out of sleep mode.  I'm testing now to see if I can recreate this with the printer attached to my PC via USB.

    Hi arosecarter,
    I understand your monitor is not coming out of sleep mode. Take a look at the following support document, Resolving Problems with Sleep and Hibernate Modes (Windows 7). Step 3 might be of particular interest to you, as you mentioned your keyboard and mouse are not really working for you either. Perhaps it is another connected device that is causing the issue? Anyway, hopefully this document will be of help to you. Best of luck. Have a wonderful day.
    Ryan1216
    I work on behalf of HP
    The advice and opinions given here are my own and not those of HP

  • Ports 1,2,3 will not dial out port 0 fine

    Dear community,
    I could use a little direction..
    I have a 2821 "COMHS00ARB" SN: FTX1302A1UP 
    It has a VIC2-4FXO on port zero I have an analog phone line that functions perfectly, on ports 1,2,3 I get dial tone and they will receive calls but will not dial out. 
    other interesting observations: 
    1: If I connect a laptop to GE 0/1 I get not LAN Lights port GE 0/0 is fine and is the uplink
    2: the Gig E port on the NME port I can not get LAN lights if I plug cable in from laptop
    3: Aux on front of chassis same no lights on LAN
    My first thought is to replace the VIC2-4FXO card to see if its faulty
    My second thought is that maybe the 2821 has taken a hit from lightening.. however all internal phones seam to be fully functional, although when I select the line on the corresponding LCD hard button I do not get the hard button to light, even on the working line? 
    Any directions would be greatly appreciated, 
    Also if I replace card do I need to worry about firmware versions? 

    Hello,
    It seems that the number you are trying to dial is not correct or the dialplan does not recognize it.
    HTH,
    Alex
    *Please rate helpful posts

  • Our facetime will not call out - ipad mini

    My ipad mini will not call out....using email address???  Appears to be activated.....

    Are you trying to message another Apple device? Is that device iMessage activated?
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
     Cheers, Tom

  • Phone will not get out of recovery mode/will not update or restore

    Iphone will not get out of recovery mode. I have pressed the home and lock screen at the same time, and nothing happens. I connected it to iTunes to try to update my phone or restore it, and it will not do anything. The progress bar shows up on the screen but does not make any progress and iTunes says it cannot connect to my phone. I have tried everything and went to the AT&T store and they told me to contact Apple support. What do I do now?

    You will have to restore it from Recovery Mode

  • I have a iphone 4s and i can't get the charger to come out of the phone its stuck on one side and will not come out

    I Have a iphone 4s and can't get the charger to come out...it was hard to get out the time before but i thought it was just me so then i charged it last night tryed taking it out and it is stuck on one side and will not come out...any suggestions on how to get it out?

    You will just have to carefully pull harder. Push the other side back in so it is aligned, then pull it straight out.

  • Just recently my messages app will not rotate out of horizontal view.  All other apps do - anyone ever have this happen?

    Help list,
    Just recently my messages app will not rotate out of horizontal view.  All other apps do - anyone ever have this happen? Know what I can do?
    Allen

    I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
    DT

  • DVD will not POP OUT ?

    Hi guys has anyone had this problem where there DVD will not pop out but you can hear it trying ?
    B540 i5
    Solved!
    Go to Solution.

    hi Buckie,
    I've seen some issues like these on laptops but not recently on the IdeaCentre B540 (your issue might be similar to this thread though).
    Can you try to:
    1. Press WinKey+E to open Windows Explorer. On the left pane, check if you can see the CD/DVD drive then do a right click > eject to open the CD/DVD tray.
    2. If same problem, use a paperclip to force eject the DVD tray
    Spoiler (Highlight to read)
    Credits to this website for the picture.
    Credits to this website for the picture.
    3. Open Device Manager (press Winkey+R > type devmgmt.msc) and verify that the CD/DVD drive have no errors (exclamation or question mark right next to it). If this is ok, verify that you see the CD/DVD drive when you open Windows Explorer (see Step 1). If it's not visible, apply this microsoft fix.
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Airport CD will not come out

    I have been trying to eject the AirPort Extreme Disc and it will not come out. I have tried several ways, iTunes, the eject botton on the keyboard, the file menu. When I try to eject it make a little noise and the then the disc disappears off the desktop but it is not ejected. I then have to restart to get it to appear again.
    suggestions?
    Thanks,
    1.25 Power PC DP G4   Mac OS X (10.4.7)   many macs

    ebhome, Welcome to the discussion area!
    Check out the suggestions in KB 88215, Power Mac G4: How to Eject a Disc From the DVD or CD Drive.

  • TS3694 I have attempted to update my iphone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!

    I have attempted to update my iPhone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!

    Without knowing what you did and exactly what happened (error messages) all I can suggest is:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • AVI files?

    Hello! I was wondering if one of you can give this novice some advice about Final Cut Pro. I am taking on a project of editing a show that I did and had video taped. The videographer is on a PC and has the files in AVI format. (He was going to put th

  • Send Mail using SO_OBJECT_SEND

    Hi All, What are all the parameters that has to be filled in order to send a internal mail to SAP to a User using the function module SO_OBJECT_SEND? A sample code or link will be helpful. Regards, Senthil G.

  • [solved] send keyboard event / key to specific background window?

    Hi! So... is this possible / how? I'd like to send keyboard events to a window in the background - maybe even in regular intervals. While I'm dong something else, in another window (or nothing). Thx! Last edited by whoops (2011-07-21 11:05:44)

  • Upgrade WLC 5508

    I'm trying to upgrade my Cisco WLC 5508 with 125 AP's from 7.0.116 to 7.4.110, so it can support the new AIR-CAP2602 and the old AIR-LAP1142 at the same time, but for some reasons the AP's will not accept the new software. (Cisco Controller) >show bo

  • I'm looking for a great sounding FireWire Audio/midi interface.....

    Does anyone have experience with the Mackie Onyx 400F FireWire Audio Interface and Logic 7 ? I'm hoping to get the very best i can for around $700. Some reviews i've read say that the sound is some of the best around. (for the price) Namely, the mic