PowerMac running Leopard wakes up but the Apple display doesn't
I installed Leopard 10.5.1 on my old Dual G4 MDD (2x867MHZ). My monitor is an Apple Display 20". Whenever the system goes to sleep and I try to resume, the computer comes up, but not the display, which remains in suspended mode. The computer is fully functional since I can VNC into it from another Mac. I can't seem to find a solution for this problem online. I already reset the PRAM and the PMU, and I am running out of options. The computer has an airport card but no other expansion card or any attached peripherals. It used to behave properly with Tiger, therefore I think the problem seems related to the Leopard install. Any hint, or indication that this is a known issue, would be greatly appreciated.
Hi! Sleep problems are common with Leopard. I can set my monitor only to go to sleep and it may wake up fine for several days and then not. It seems worse since the 10.5.1 update. I may just use a screen saver and not let the monitor sleep. Tom
Similar Messages
-
2nd generation ipod touch wont turn on. The screen blinks but the apple icon doesn't show up.
I have a 2nd generation ipod touch that I got from a friend. I drove all the way across the country (three day trip) and it worked perfectly. It was in a hard case and has no damages to it. I haven't dropped it or gotten water on it at all. But for some reason the screen wont turn on. It blinks on and off when I plug it into the charger (and theres like a soft clicking noise that I hear when the screen blinks) but the apple logo wont show up. And it doesn't seem to actually be charging. It doesn't seem to actually die all the way either.... It's weird.. but I know no damages have happened to it so I don't know what to do. I've tried to reset it (pressing and holding the home and power buttons) but that wont work either. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
anybody able to help me with my setup for apple tv. i've followed the directions in the guide and my tv doesn't seem to register in part. it's weird because my tv system info identifies the apple tv but the screen never went black and it doesn't show anything, too, my imac doesn't seem to register the apple tv unit either
I would try connecting it to another tv to see if it works there if it does
then likely your tv can't handle the default resolution and you should lower it on the other tv
if not then you should connect it by usb to the computer and use itunes to restore it's firmware -
my ipad froze during a upgrade. it might have run out of battery. i brought it with me to work and i'm charging it but it keeps displaying a black screen. it wont even let me power it off.
If it is totally black, all the time, and you can never see anything on the screen, I agree with stef7 - it needs replacing. Is it still under the manufacturer's warranty?
Is the proximity sensor (dot(s) on top of the phone) covered by a case or screen protector? That would make the phone "think" you are holding the phone at your ear to talk, and will turn off the screen to save battery.. -
I have a new Apple TV which is working fine except that I cannot access .mov files which are in my iTunes Library. How can I get to these? I can run them on my computer and select Apple TV on the screen, but the Apple TV goes to a black screen
Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.
-
my phone was showing the apple pic when i eraseed all content and settings so i did Pressed both home and sleep/wake buttons until the Apple logo appeared, then released the sleep/wake button and continued pressing the home button alone until iTunes detected the phone in Recovery Mode but an error is coming (1015) plz help me!!!!
plug into itunes and take it from there
http://support.apple.com/kb/HT1808 -
my Mac book will power up but the apple sign remains in the middle of the screen and a gear turning below it -nothing else happens -can you help?
A couple of things to try:
PRAM reset by holding down cmd-opt-p-r on restart. Hold down the keys until you hear the second startup tone.
If you have a wireless keyboard, wait until you hear the startup tone, then press the keys.
http://support.apple.com/kb/HT1379
Boot into Safe Mode by holding down Shift key on restart. Same timing applies to wireless keyboard.
Safe Mode takes a while to boot. It will show a progress bar. It will boot to the login screen. Log in, then restart normally.
http://support.apple.com/kb/ht1455
Boot into Recovery HD by holding down cmd-r. Same note for wireless keyboard. Once booted, run Disk Utility and repair Macintosh HD (or whatever you have renamed it).
http://support.apple.com/kb/ht4718 -
FCPX crashed and I reported it here. Tom Wolsky suggested I trash prefs, perform an fsck, reboot and redownload FCPX from the App store. The reboot was okay but Safari will not let me access the App Store to redownload FCP. I'm running 10.6.8 but the App Store icon is grayed out. I get a "Safari doesn't recognize addresses starting with macappstore."
How do I get to the App Store to get FCPX back? I'm using the Trial version now.How are you linking to the App Store from Safari? From this page?
http://www.apple.com/finalcutpro/trial/ -
my ipod touch wont turn on ive tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.
Try:
- Another cable
- Another USB port
- Reboot the computer
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my iphone I fell to the ground yesterday, from a height of approximately 1 meter. after this I trailed off, now only turns on when I plug the usb but the apple appears and just turn off and turn back, there is nothing more that I recommend doing?
With that behavior you need to take the iPhone to an Apple store genius bar for an out-of-warranty replacement. In the US that is $269 for the iPhone 5.
-
i want to install my photoshop 5.0 limited edition but the pc displays i should check if it is a 32 or 64 bit application. i changed my windows os from xp to win7 64 bit (i think that is the problem) how can i install and run my photoshop 5.0 le on this system?
Kglad Creative Suite 2 is only applicable to individuals affected by the activation server shut down. A complete list of affected software titles can be found at Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products.
-
My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton. How can I make my Iphone work???? I know it is not dead because I can see the apple logo on, and every time I connect it to a USB port to charge, or a wall charger, the battery appears with a bit of red. Still, it wont turn on. It's been like this for three days now and I haven't stopped charging it. IT just WONT charge? Any tips I can use to solve the issue?
-EstebanHello estebie67,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like the iPhone is experiencing issues upon startup, and may not be loading the firmware or operating system correctly. If you have not already done so, try resetting the iPhone while connected to power:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above does not resolve your issue, it will be best to restore the iPhone in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?
The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck
-
Ipod classic try to start but the apple just flashes on and off.
Ipod classic I try to start but the apple just flashes on and off.
I can't reset and it doesn't show it charging. Not recognized by computer.
It was working just fine in my car, I stopped for an hour, and when I came back it just started the flashing thing.
Anyone have any ideas?Reset it this way.
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
If it is still not working.
Then Restore it using iTunes
Good Luck! -
i forgot the answer of my security question as opposed i sent to apple for get back the answer . but the apple didn't answer me so pleas help me >?
Hello there, Faisal-almutairi.
The following Knowledge Base article has the information you need for what to do in your situation:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
Specifically:
What should I do if I don't remember the answers to my Apple ID security questions?
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID password
contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.
Maybe you are looking for
-
I replaced my iPod, now I get error 9808 and cannot connect to Itunes store or sync my ipod
Hi I replaced my iPod, but since then I have not been able to sync it to itunes. When I try and go into store it gives me an error message 9808 "check connection". How do I solve it:?
-
It seems that none of the techniques described in the Apple iTunes troubleshooting tutorial have worked. I have spent hours on this. I think that when I downloaded DVD converter and burner program that some preference got tweaked. or When I ran a 'd
-
Possiblity to expand / narrow / reset all drillstroughable parts of the report with one button
Hi, has anyone done that bevore? Is this possible .. I have parts of a big Report, that are expanded (where i can see all detaildata) and parts where the detaildata is there, but arent showed by Standard (are narrowed). I wish i could have a button,
-
I'm trying to use the web interface to the CVS entries in some packages, but it seems that the files there are outdated. I've heard about migration to SVN, so maybe this is a known problem that will get solved soon. Just wanted to ask and make sure.
-
Disk utility doesn't allow to partition
when I pressing the button "apply" it sends this error what's wrong?