Powermac Won't Boot From Leopard Disc, Hard Drive, etc.
I've tried to boot the computer from the cd, hard drive and other things but it will not boot because i don't know the open firmware password. Any ideas?
In fact, I have but I first saw yours.
This seems to be a relatively frequent problem.
I've even checked that Firmware Password Protection thing.
Apple procedure is puzzling to say the least. They say
it could prevent boot from DVD and advise to install
the app from the App DVD (the # 2 DVD delivered with the
MBP to correct this and deactivate FPP if it was activated in the first place.
I checked : no Firmware Password Protection in the DVD.
Usually, Apple never behave like Micro$oft, God forbid…
Message was edited by: Hellstan
Similar Messages
-
G4 PowerMac no longer boots from External FireWire Hard Drive
What would cause a G4 PM to no longer boot from an Ext. FW HD that was working fine yesterday and in fact still mounts fine on the desktop..... but when I go into system pref's and attempt to select the ext. HD (and it does show up as an option to boot from since it has an OS in Mac OS Extended Format, Journaled) but after selecting said drive the system simply defaults to the main HD instead and not the external HD I selected within system pref's.???
(I've run apple's disc utilities / First Aid ..... it simply says no repairs were necessary).
The HD in question is a Maxtor 120GB 7200 ATA133 in the following ADS enclosure:
Click Here
Same enclosure works fine with a pionner 110D S-Drive.
Any Suggestions (short of installing the Maxtor hard drive internally which I may have to try anyway)? -
Hi, I'm having some major issues trying to install OS X, and was hoping someone might have advice for me. I'm trying to format my hard drive on my MacBook Pro and install a clean copy of OS X Snow Leopard.
However, whenever I try to boot from the install disc, it freezes on the Apple logo. I still can boot from my current hard drive fine, though.
I checked Disk Utility, and I was able to verify and repair my permissions. However, when I tried to verify my disk, it said there were errors and that I needed to repair the disk (however, the repair disk function was greyed out).
I tried booting into single-user, or shell mode, and running fsck -fy, but it didn't fix the issue. I also tried using Disk Warrior to verify and fix the permissions (but Disk Warrior won't let me rebuild the disc), but this didn't fix it, either.
I also reseted the PRAM, but that didn't help either.
I'm running out of options, but thought someone in this forum might have another suggestion or idea I could try. Thanks again!
Message was edited by: Wayne MaIn fact, I have but I first saw yours.
This seems to be a relatively frequent problem.
I've even checked that Firmware Password Protection thing.
Apple procedure is puzzling to say the least. They say
it could prevent boot from DVD and advise to install
the app from the App DVD (the # 2 DVD delivered with the
MBP to correct this and deactivate FPP if it was activated in the first place.
I checked : no Firmware Password Protection in the DVD.
Usually, Apple never behave like Micro$oft, God forbid…
Message was edited by: Hellstan -
HP Pavilion 15-n084ca Notebook PC won't boot from recovery discs .
HP Pavilion 15-n084ca product # F0Q63UAABL Notebook PC won't boot from recovery discs , it gets to 97% then satys there for an hour or so then comes up with an error code .
computer won't boot windows 8 .Hi:
For PC's that came with Windows 8, In order to boot from a DVD you need to change some BIOS settings.
Please read the info at the link below for what settings to change.
http://support.hp.com/us-en/document/c03736054 -
I want to Boot from My old hard drive.
I an trying to do this work around so I can continue using protools 7 with my MBP running Snow leopard. I pulled out my old hard drive running Tiger and put it into a USB case. I installed a new 650GB hard drive in to my laptop, installed Snow Leopard and reinstalled all my old software. So far so good. Now I want to boot from the old hard drive running Tiger so that I can launch Protools 7. I choose the external HD as the startup disc and end up getting a circle with a line through it on startup.
Is there something else I need to use my old hard drive running Tiger as a startup disk?
Thanks!If the original HD still has the version of Tiger installed on it that came with the MBP (probably Mac OS X 10.4.8, build 8N1037, 8N1051, or 8N1430) or a later version of Tiger like 10.4.11, then the MBP should be able to boot from it.
To determine what OS & build number is on that drive, open the Startup Disk system preference. Hover the pointer over the drive's image in the window & the OS version & build number will pop up in a ToolTip window after a brief delay. What does it show?
Also, which MBP do you have? Open System Profiler to the Hardware Overview page. What is the Model Identifier shown in it? Is it "MacBookPro2,2" or something else?
Assuming the OS version & build number are sufficient to boot the MBP, it may be that the USB enclosure does not support booting. Most do, a few do not. What is brand/model of the enclosure? Do its specs specifically say it can boot a Mac?
If all of this seems OK, you can try running Disk Utility's two repairs (permissions & disk) on the external drive. If no errors are found, you may be able to get it to boot the Mac by reinstalling Tiger on it from the original system disc set. This will require updating the OS to the latest version you had installed on it for best results. -
A205-S5000 won't boot. Says possible hard drive problem
Laptop won't boot and says possible hard drive problem. Need to recover
personal reports and data, so thinking of removing the drive and using an enclosure
so the data, if still good, can be extracted from the drive by another computer. Question
is, will I be able to create the restore cd's from the hard drive if the hard drive is not the
boot drive ie; attached to a 2nd computer via usb and enclosure.
If it's not possible, I can try to create cd's from a different model laptop (toshiba), same vista os but
what about the product key? I will try to reinstall the bad drive and try a reboot to recovery mode but
I doubt that is going to work or complete. Idea was to get a new drive and try to install recovery disks.Satellite A205-S5000
Recovery discs must be from an identical model. If you can't burn them from that computer, best to order them
Order Toshiba Recovery Media
The restored Windows is pre-activated.
-Jerry -
How do I boot from an alternate hard drive?
How do I boot from an alternate hard drive?
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the "OPTION" key.
3. Release the key when the boot manager appears.
4. Select the desired disk icon from which you want to boot.
5. Click on the arrow button below the icon. -
My Macbook air flash had gone for a month and I saw Apple's Macbook air flash storage drive replacement program. I'm not sure whether that program is still available for the broken device or not. Now, I'm booting from the external hard drive. Warranty has gone in October 2013..
I want to send back my macbook air back to apple store. The problem is that I bought it from US and now, I'm using it in Myanmar. If the program is free of charge for my device, it's worth trying to send back to US. Since mine is broken, I'm afraid Apple will take charges for reparing.
So, if anyone having the same problem as me, I would like to get suggestion....
Thank you!!I have no idea about how to handle the international aspect of your question.
But here is the Apple writeup about the problem and the remedy. Maybe that will help you.
http://www.apple.com/support/macbookair-flashdrive/ -
It shows the grey screen that i need to restart when i try to boot from an external hard drive. both drives have snow leopard
Kernel Panics? Don't panic too!
"You need to restart your computer" (kernel panic) message appears (Mac OS X v10.5, 10.6) -
I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?
When I tried using a recently downloaded (from the App store) version of MtLion 10.8.2 (12C60) I could NOT get the new MacMini to install or boot from a USB I had previously made. I was however able to use the Recovery Mode of the MacMini to create a bootable SSD which I had installed. The problem arose when I went back into Recovery DU as it saw the seperate drives (SSD & HD) as a broken Fusion Drive. Interestingly DU from the boot volume had NO issues and reported NO faults. It was the Recovery DU that identified the faulty Fusion Drive configuration. At this point I am definately out of my depth but my speculation is that the Recovery Volume is being used in some fashion to form the method or pattern that DU assigns files to the drives, System Report sees the drives as seperate volumes with all their individual characteristics.
Disk Utility did not make a bootable USB, I don't have or use CCC or Super Duper.
Here is the longer version I've been compiling:
Having bought a late 2012 Mac Mini(6,2) i7 2.66GHZ with the standard 1TB 5400 HD and 4GB of RAM (base model) I immediately decided to install a Mercury Elite 6g 240GB SSD and up the RAM to 16GB. I received both shipments on the same day and had all my new toys in front of me. After following the video advice on OWC’s website for the installation of the second drive I started the mini and formatted the SSD to accept the OS from Recovery on the original HD. This MacMini shipped with 10.8.2 (12C2034) as the OS, the normal build of 10.8.2 is (12C60). Having used Recovery Disk Utility to format the SSD it came back with an error that DU could’t Repair. I went ahead and installed the OS on the SSD and the Mini booted normally from both drives. The issue I encountered with this setup was that iMovie encountered an “unexpected error” and would not save a completed project. I therefore decided to figure the drive issue out because I suspect the new Fusion File Management software didn’t like my configuration with drives that Recovery DU saw as needing to be “fixed”. After spending some time on the phone with both OWC and Apple Support I took the plunge and used Internet Recovery Disk Utility and allowed both drives to be “fixed” after which DU created a Fusion Drive (Logical Drive) that I then ran Repair Disk on and it showed up as a single drive in DU. It works perfectly as described by Apple’s site:
http://support.apple.com/kb/HT5446
Having checked the Link Speed and Negotiated Speed they both show as 6g so I’m pleased not to have lost performance due to it being fuzed to a 3g 5400 drive. The biggest drawback is that Apple’s Fusion Management only allows for 1 additional partition and I would have preferred more than that.
I have sourced some additional information here:
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.fosketts.net/2011/08/05/undocumented-corestorage-commands/
If anyone has a factory Fusion Drive could you please post the Link and Negotiated Speeds of both drives? This information can be found in Apple > About This Mac > More Info… > System Report > Serial ATA and the drives should show up as discrete drives with their info listed separately. -
G5 won't boot from Install Disc or Hard Drive
After 2.5 years of perfect service my G5 2.0 suddenly won't boot from the HD or Install Disc that came with it. My G5 only shows the grey screen with the apple logo, the spinning gears and the circle with the line through it.
I haven't added any hardware since day one. I've done pram,nvram and smu resets. I've selected a start up disk by holding the option key, removed and re-seated the ram one by one.
The Apple Hardware test CD shows everything passing. I ran Disc Utility from Target Mode from my MacBook Pro and it showed the G5 hard drive is in working order.
I think I have a hardware issue.
Is it worth it to get this model repaired if its something major?I was having a similar problem, except I only saw the grey apple logo, no spinning. Finally got it figured out, ended up being one of my processors (dual 1.8) was bad, took the bad one out and it works fine now. Now Im working on getting processor replaced.
-
Mac Pro 2008 won't boot from install disc - black screen
Hello,
I recently purchased a new hard drive to replace the original that came with my Mac Pro 2008. I was able to format the new drive using Disk Utility. I am now at the point where I need to install OS X onto the new drive, but the computer refuses to boot from the disc. The disc is recognized by the computer (I can access the disc and am able to use the BootCamp applications, etc.) but I just get a black screen when trying to boot directly from the disc. The computer boots fine otherwise.
I have tried the following:
I have tried using both the gray install disc that came with the computer and the Snow Leopard Install DVD disc.
I have tried booting using the "C" key and the "option" key but still receive a black screen following the chime (I've held these down for several minutes).
I have tried restarting from either install disc using the Bootcamp Assistant.
I have tried running the installation software to get it to restart from the disc.
I have tried a combination of the drives, i.e. trying to boot from the discs with just the new drive installed, just the original drive installed, and with both in bay1 and 2.
Everything results in the computer starting up, hearing the chime, and then nothing..just black screen. I have the original drive partitioned with BootCamp with OSX Snow Leopard and Windows 7 installed (I don't know that that matters).
I am at a loss as to what to try next. It doesn't seem like the superdrive because it is recognizing the disc, it just won't boot from it.
Any help is appreciated, thank you.Clone should be a must and easy to do and learn (learn by doing! 2)
6800 would 'qualify' as 5x70 series flashed etc and same rule: 10.6.5
In the past there was 10.4.6, 10.5.6, but not 10.6.6 - even though strong need for such a DVD.
10.6.8 DVD would be excellent
Lion or ML - buy, download, make an installer flash card would be what I would do at this point.
Then keep both - dual boot as you learn and test and see what ML does and waht you had that required Rosetta to support PowerPC. See www.roaringapps.com about that.
With Carbon Coyp Cloner - was share, now commercial, great utility been around since 10.2.2 at least - this time 2003. 10 yrs.
You can clone the system folders, you can even selectively choose. You can skip copy of most of your home account and do that separately to another drive if you want.
Clone Windows with Paragon or WinClone and use Windows 7 or 8 DVD to do a system repair (automatic) or to edit the BCD file. It can and should - and all you do is boot Windows 7 DVD w/ only the one drive present and go at it. Piece of cake. But yes, Windows gets fussy if you change or remove or move. BCD to the rescue. A proper program for cloning like Paragon's "Clone OS" meant for going from disk drives to SSDs, knows that and how to do it.
Back to how to clone etc:
Clone
Disk utility has RESTORE which will also clone your system but not the Lion Recovery partition. Oddly Apple did not 'endorse' making bootable clone of the system which works too but most choose Carbon Copy Cloner - it works more consistently; it allows for smart update of the backup volume. Both can backup to a sparse disk image if desired.
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
The DVD is dependent on your hardware. And your hardware changed. The drivers for the 5780 and 6xxx are bundled in the OS and lacking. Minimum build thing.
Put the new drive anywhere you want. Does not matter. Can move it later. Can be drive bay 0-3 or a Firewire external or under the DVD drive.
When you clone pull the old drive and boot from the newly cloned.
After that keep a backup clone around all the time. Takes less than 10 minutes to do a smart update to copy just the changes to keep it current. So you have working copy of the system. I keep Clone "A" that I keep "as was" the system as of last month or whatever (like 10.7.4 before upgrade to 7.5).
Comes easier after doing it once and have all your ducks in a row. -
MacBook Pro Won't Boot from Leopard DVD
My brother's MacBook Pro (2009 13") won't boot from the Leopard install DVD. Here is what happened:
- I tried to do Bootcamp on it. I installed Windows 7 but realized that there were no Bootcamp drivers for that.
- Deleted Widnows 7 and put the XP install disc in. Somehow, it formatted my Mac partition instead of my Windows partition.
- Now that the MBP was only running Windows XP, I connected it to my iMac in target disk mode and wiped it (GUID, one Mac OS Extended (Journaled) partition).
- I tried to put the Leopard (10.5.0) install DVD in there so I can restore from the Time Machine backup, and it sees it when I hold option at bootup but refuses to boot from it.
- I reset the PRAM and tried again, no luck.
What is going on here? Does it have to do with the fact that it was doing Bootcamp? I either want to boot from the disc or somehow restore from Time Machine some other way. I can use another computer (my iMac) if I need to.Haha yeah, I posted right before. The thing I'm wondering now: Does this mean that a Mac that came with Lion cannot be downgraded to Snow Leopard? Well, I'll save it for another question if I ever cross that bridge.
Limnos wrote:
Just so we know, this is the original OS disc that came with this computer? Even if you're trying to use a retail installer disc I am not sure those came out the the sufficient sub-version required to boot the computer (I think it needs at least 10.5.7 but don't have the specifics of your model).
Edit: I guess I'm a slow typist. -
2007 iMac won't boot from startup disc
My brother passed away and I inherited his Mid 2007 iMac. Works fine, but all accounts are still in his name and I do not have his passwords. Trying to wipe the hard drive and do a clean start, but unable to boot from startup disc. It was purchased with Snow Leopard, but has been updated to Lion 10.8.3. It appears that there may be a security feature that rejects any attempt to boot from startup disc. Is there another way to wipe hard drive and start clean?
Sorry for your loss ...
The original startup disc will not work on a Mac running v10.8.3.
The fact that you do not have the admin password is a problem because you will need it to repair the startup or restore OS X using OS X Recovery -
IMac can't/won't boot from Leopard DVD
My 1GHz G4 iMac can't or won't boot from the DVD, although I know the media is good.
I get stuck on the grey screen, the rotating bug stops rotating after about 5 minutes.
It will still boot from the hard disk fine, and will boot with other DVDs as well. Hardware diagnostics check out fine.
I did try single user mode, it will get there OK.
Verbose mode spits out a lot of messages (who knew? - lol), but nothing that seems to point to any one issue. It too stops spitting out messages after about 10 minutes.
Any ideas?I did try the clicking the mouse thing just for the heck of it... no joy.
I do see a few other threads like this one, so I'm not alone on this.
The error messages I see are (not going to type them out all the way):
launchd[1]: Failed to count the number of files in /System/Library/StartupItems no such file or directory
Then a bunch of mDNSResponder errors, also saying either no such file/directory or invalid destination port.
Then a message saying Folder Manager is being asked to create a folder (cach) while running as uid 0
Then Cannot use ATS Persistent Store - switching to old FODB cache code
kextd[47]: root filesystem is read-only; skipping kernel link data generation
followed by a couple of errors from configdp[41]
Then nothing....
Still stuck...
Maybe you are looking for
-
How do i get my file back when it seems to have been lost or replaced?
My Mac froze and then shut down so i started it up again to find my indesign file had been replaced with a much older file with practically no work on. I closed the document and tried opening it again but it now will just open as a much older file. I
-
Problem with the date conversion
Hi Friends, i am facing the problem with the date conversion, Actuall my requirement is to pass the date to the screen based on the user setting roles(SU01). I have fetched the user setting date format by using the funciton module SUSR_GET_USER_DEFA
-
I'm looking for Conversion Agent Java API. Would you please advise where I can find this API. Thanks.
-
Once I have upgraded os to os4, none of my contacts are getting synced into iphone (old 3g) with outlook 2007 and Windows 7. Have tried all options on support but none works, anyone please help, its terrible without contacts... INDIA <Edited by Host>
-
I can't insert any disc in my disc drive slot something is blocking insideside
please help...