PowerMac won't reboot from CD

I'm trying to boot with the DiskWarrior CD, get to the gray apple screen and then the monitor freezes and some rogue pixels distort in the gray background. If I try to start in safe mode, I get stuck at the gray screen and the fans ramp up.
Any thoughts?

Make sure your version of DiskWarrior is compatible with 10.4.10.

Similar Messages

Older mac mini won't reboot from Install DVD?

I've passed on my 2006 era mac mini to my daughter. We can't seem to get to a factory settings because it won't reboot from the install DVD. It keeps cycling through to the normal reboot.

Could be damaged disks.
BestBuy sells disk repair kits.
But for about the same price as disk repair kit, you could call 1-800-676-2775 and give them the unit serial number and pay shipping/handling fee for replacement.
Assuming it is bad disks.

MBA won't reboot from remote disk to reach Disk Utility and repair the disk

After a routine disk repair session, it advised me that I need to repair the disk on my MBA. A few months ago it was the same, and I did it quite successfully without any problems, according to instructions: inserted the MacOS 10.6 DVD into the iMac optical drive, launched Remote Install OS, and so on. However, now my MacBook Air refuses to boot from the remote disk, so that I can reach the Disk Utility and proceed to repair disk. It sees the remote DVD Installer disk, I connect to my home WiFi, and I choose reboot from the Install DVD disk. An Apple logo appears on a grey screen with a small globe spinning below, but after a some lengthy minutes it always reboots normally!!! It seems I tried everything many times to no avail.
Any solutions???

Nope. Waiting for 10.6.4 update, which is hopefully next week and may change the situation for better.

Won't reboot from install disk

i can't boot from a bootable disk (my install disk or norton).
i'll hold down the c button just like i've always been able to do before, but it goes straight to the login page, instead of starting up from the disk.
if i try and go into account setting/startup disk it doesn't even list my bootable disk as an option...
anyone ever heard of this?
imac 2 Ghz Intel Core Duo Mac OS X (10.4.9)

just a silly question - because I've done this.
Is it the right disk? The one that came with your intel?
I tried my G4 disk by mistake and it won't work.

Powermac won't move from flat grey screen.

I have turned on my computer and it stays at a flat grey screen! I tried booting from a cd, from safe mode (requires a password that i dont know)
and multiple other things. occasionally it'll bring up a question mark in a folder then go to a face in a folder. Can anyone help?

Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238
Does it boot into Open with CMD+Option+o+f ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)
How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Powermac Won't Boot From Leopard Disc, Hard Drive, etc.

I've tried to boot the computer from the cd, hard drive and other things but it will not boot because i don't know the open firmware password. Any ideas?

In fact, I have but I first saw yours.
This seems to be a relatively frequent problem.
I've even checked that Firmware Password Protection thing.
Apple procedure is puzzling to say the least. They say
it could prevent boot from DVD and advise to install
the app from the App DVD (the # 2 DVD delivered with the
MBP to correct this and deactivate FPP if it was activated in the first place.
I checked : no Firmware Password Protection in the DVD.
Usually, Apple never behave like Micro$oft, God forbid…
Message was edited by: Hellstan

Comp won't Reboot

I have a problem where my computer won't reboot from a "power on" state. Whenever it recieves a command from Windows or the bios to reboot it turns off and then sits there looking like it's on without actually booting up. The only thing that will enable the computer to boot is to turn it on using the power button.
My computer was working fine for a month and a half and then I left my computer on when I went out and when I came back my GF6800GT was dead. I installed an old GF4 MX440 and found that I now had this boot problem. It doesn't seem to be related to the GF4 graphics card as it works perfectly in other computers and I flashed the bios on the motherboard which solved the problem for a little while, but it's back again.
My system specs are:
Athlon64 3000+
K8N Neo2 Platinum
2x512MB Corsair XMS3200-XL
Thermaltake Purepower 480W PSU
Geforce4 MX440
LG-GSA4160 DVD Drive
I have no idea what caused the problem as there hasn't been any surge that would cause the switch on my surge protector to break. I've also run Prime95 for an hour with no problems so I don't think its the RAM or CPU that stopping it from rebooting.
Does anyone have any ideas as to what might be causing the problem or if I've got a faulty motherboard?

Quote
Originally posted by RollerCam540
FastEddie: Do you edit your Power Saving features?
To some extent, yes. I prefer S1 to S3 sleep mode. With lvd scsi, i leave the drives live at all times (server apps) and only enable advanced power features for the monitor. For desktop/workstation apps, S1 with hd speep mode enabed.

Upgraded to 10.4.9 from Tiger 10.4.5 and now mac won't reboot

Hello everybody
I bought a mac mini recently "in perfect working order" with lots of installed software and the mac engineer who sold it said it could be upgraded from 10.4.5 to 10.4.9 apple's latest. I did this last night and now it won't reboot! I get a white screen with the little wheel turning and then it switches off and gives up entirely. What can I do?

Thanks all for your help. Yes I was hoping to use a disc for a Power PC mac mini when it's an intel. I got the disc out by holding down the mouse on startup. I contacted the seller and he says my OS has got corrupted and I can get a mac doctor to reinstall it. He never included the original OS10.4.6 when he sold it to me. It was bought as sold - does he even have the original discs one wonders. Anyway I also told him that I had originally plugged in my ipod which said it wanted iTunes updating then when I had done that a message said iTunes wouldn't work unless I updated the OS to 10.4.9. Included when I updated the software was a firmware update. So the OS has become corrupted and must be restored by a Mac authorized repairer. I hope this is possible without losing the applications already installed
Anyway that's what I'll do and thanks everybody for all your great help
Bryony

MacbookPro won't wake from sleep and reboots

Since installing Yosemite this morning, my MacbookPro won't wake from sleep, it reboots. I have also had one instance of a black screen forcing a hard reset. On rebooting I get a popup about a graphics error, my machine is a 2013 model so I wouldn't have expected any compatibility issues and it was rock solid until I upgraded the OS, any thoughts?

And this is the panic report I get every time:
Anonymous UUID:       9905C7CD-E37B-88D5-513F-68E0BA0DF20A
Sun Oct 19 16:56:06 2014
*** Panic Report ***
panic(cpu 2 caller 0xffffff802c01e80a): Kernel trap at 0xffffff7fad95fe28, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000002f335000, CR4: 0x00000000001626e0
RAX: 0x0000000000000000, RBX: 0xffffff803fd92000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80396f3b50, RBP: 0xffffff80396f3bf0, RSI: 0x0000000000000240, RDI: 0xffffff803fd92000
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x000000873104f8f7, R11: 0x00000087306c72ac
R12: 0x0000000000000000, R13: 0x000000000000023e, R14: 0xffffff803fe70000, R15: 0x0000000000000000
RFL: 0x0000000000010293, RIP: 0xffffff7fad95fe28, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000002, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff80396f3800 : 0xffffff802bf3a811
0xffffff80396f3880 : 0xffffff802c01e80a
0xffffff80396f3a40 : 0xffffff802c03a443
0xffffff80396f3a60 : 0xffffff7fad95fe28
0xffffff80396f3bf0 : 0xffffff7fada770a2
0xffffff80396f3cb0 : 0xffffff7fad8604a3
0xffffff80396f3d00 : 0xffffff7fad8631be
0xffffff80396f3db0 : 0xffffff7fad8620f2
0xffffff80396f3dc0 : 0xffffff802c4d8008
0xffffff80396f3e20 : 0xffffff7fad862d0b
0xffffff80396f3e50 : 0xffffff802c4c5a03
0xffffff80396f3ee0 : 0xffffff802c4be797
0xffffff80396f3f00 : 0xffffff802bf6be13
0xffffff80396f3fb0 : 0xffffff802c0192c7
      Kernel Extensions in backtrace:
         com.apple.driver.AirPort.Brcm4360(900.19.8)[E6DF5F6D-3476-3BA6-B49B-BAADEC7DF58 0]@0xffffff7fad84e000->0xffffff7fade24fff
            dependency: com.apple.driver.mDNSOffloadUserClient(1.0.1b8)[25CEDABE-0952-309D-AC20-A39DF84 9DFB7]@0xffffff7fad547000
            dependency: com.apple.iokit.IO80211Family(700.52)[13EA5B53-E76C-3F27-A9CA-6D3B59AE6F44]@0xf fffff7fad79b000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fac724000
            dependency: com.apple.iokit.IONetworkingFamily(3.2)[247581D8-DFC5-3AAE-B079-3D13F5514C2B]@0 xffffff7fad076000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x000000002bc00000
Kernel text base: 0xffffff802be00000
__HIB text base: 0xffffff802bd00000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 580633243873
last loaded kext at 247606911965: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7faebab000, size 69632)
last unloaded kext at 307957273457: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7faebab000, size 61440)
loaded kexts:
com.hzsystems.terminus.driver 4
com.Cycling74.driver.Soundflower 1.6.6
com.bongiovi.DPSReflector 1.0
com.apple.filesystems.exfat 1.4
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.AGPM 100.14.37
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AudioAUUC 1.70
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyDriver 266.5
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.GeForce 10.0.0
com.apple.driver.AppleIntelHD4000Graphics 10.0.0
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleIntelFramebufferCapri 10.0.0
com.apple.driver.AppleMuxControl 3.7.21
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AirPort.Brcm4360 900.19.8
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.nvidia.driver.NVDAGK100Hal 10.0.0
com.apple.nvidia.driver.NVDAResman 10.0.0
com.apple.iokit.IOSurface 97
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
com.apple.kec.Libm 1
Model: MacBookPro10,1, BootROM MBP101.00EE.B05, 4 processors, Intel Core i7, 2.6 GHz, 8 GB, SMC 2.3f36
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (7.15.124.12.8)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM512E, 500.28 GB
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4

MacBook Pro won't sleep in OS X after reboot from Windows

I have Windows 7 Ultimate 64 bit running on a BootCamp partition on my MacBook Pro running OS X 10.6.3. When I first installed 7 last year, I initially had a strange problem in that the Mac wouldn't sleep (default settings) when rebooted back into OS X from BootCamp. If I did another restart in OS X, everything returned to normal. I never found a solution to the problem but after a while it went away and things worked properly. Now, after several months and for no good reason I can think of, the problem has returned. Everything works correctly in both OSs except for this. Any help would be appreciated.
Clive

Tried repairing BootCamp in 7, no change, don't think there was anything wrong with it in the first place.
Here is a section of the log after reboot from BootCamp and it says "System Sleep prevented by active remote login session (600 second threshold)". This ONLY happens after a reboot from Bootcamp, after another reboot all goes back to normal. What could the "active remote login session" be?
From log:
21/04/2010 23:08:56 kernel PM notification cancel (pid 16, configd)
21/04/2010 23:08:56 kernel IOPMrootDomain: idle cancel
21/04/2010 23:12:00 configd[16] PowerManagement configd: System Sleep prevented by active remote login session (600 second threshold).
21/04/2010 23:12:00 configd[16] PowerManagement configd: tty sleep preventer: /dev/console
21/04/2010 23:12:00 configd[16] PowerManagement configd: System Sleep prevented by active remote login session (600 second threshold).

MacBook Pro won't sleep in OS X after reboot from Windows (again!)

This problem originally occurred about a year ago and no solution was found then but after a time, it simply went away. Well, now it's back: after a reboot into OS X (10.6.7) from Windows (7 Ultimate 64 Bit), my MacBook Pro refuses to sleep until rebooted a second time, after which it behaves correctly again. The Console log reports the following message: "System Sleep prevented by active remote login session (600 second threshold)". I've disabled Growl and DropBox (possible suspects last time) to no effect, reset the SMC and PRAM, all the usual things. I've tried when connected to mains power or battery, on wired, wireless or no network at all and still the same problem. Sleep behaviour under Windows is correct. Hopefully the problem will eventually cure itself as it did last time but I would like to discover the reason and find out what this "remote login session" could possibly be. To reiterate, this ONLY occurs immediately after rebooting from Windows.

Tried repairing BootCamp in 7, no change, don't think there was anything wrong with it in the first place.
Here is a section of the log after reboot from BootCamp and it says "System Sleep prevented by active remote login session (600 second threshold)". This ONLY happens after a reboot from Bootcamp, after another reboot all goes back to normal. What could the "active remote login session" be?
From log:
21/04/2010 23:08:56 kernel PM notification cancel (pid 16, configd)
21/04/2010 23:08:56 kernel IOPMrootDomain: idle cancel
21/04/2010 23:12:00 configd[16] PowerManagement configd: System Sleep prevented by active remote login session (600 second threshold).
21/04/2010 23:12:00 configd[16] PowerManagement configd: tty sleep preventer: /dev/console
21/04/2010 23:12:00 configd[16] PowerManagement configd: System Sleep prevented by active remote login session (600 second threshold).

Imac (Flat Panel) won't let me reboot from anything but hard drive! HELP !!

I was given an iMac flatpanel. Trying to erase hard drive and reinstall OS 10.2. The computer will not let me reboot from ANY cd or dvd. Tried everything, including an external firewire dvd-rom, and putting my macbook pro in target mode. (the message is that the imac doesn't recognize the HD and wants to initialize it!) I've zapped the PRAM, started in safe mode, I'M EXHAUSTED! Any idea how I can reinitialize the HD and start over?
Steve

Squigles wrote:
I had the same problem when I first had a MacBook, some company here in the UK wanted to charge £140 for collecting it resetting the firmware password and returning the MacBook to me. Some one sent me the instructions you see above, it worked and saved me a few ££.
Care to name and shame them?
I like to know who to avoid and who not to recommend.
mrtotes

Suddenly won't wake from sleep.

All was well but suddenly the Powermac G4 (gigabit ethernet) won't wake from sleep. Tried resetting the PMU (battery out and button pushed). Tried resetting the PRAM. Tried deleting the energy preference file. Even tried installing 10.5 on this old baby (runs just a slowly as ever, but startup takes an age). Can't run hardware testing because there's a bad firewire on the motherboard and it just stops there. Don't know what else to do. Why? this is my music server and it uses just as much power as my refrigerator if left running all the time but only needs to run when playing music.
400MHz PowerPC G4 (2.9)
boot rom 4.28f1
two Maxtor ATA drives
Studio Display with DVIator power and adapter
1G RAM (sure, I'd like more)
one PCI card with FW and 2 USB
one PCI card with 4 USB
Airport card
Modem
System Power Settings:
System Sleep Timer: 60
Disk Sleep Timer: 10
Display Sleep Timer: 10
Sleep on Power Button: No
Automatic Restart on Power Loss: No
Wake on AC change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes (does not respond)
Wake on Modem Ring: Yes

If the SMC reset doesn't work try this.....
If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Try resetting the PRAM. This should reset the NVRAM on most machines, which is the suggested fix.
Then put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong. The restart is very important.
 Good Luck! DALE

Hi guys I'm really in need of some help. I have an IMac I3 for a while now I've been having a problem of my machine refusing it shut down , it goes to a blue screen with a spinning wheel but doesn't shut down. And now won't boot from install DvD

Please some one help me ...
A) my mac won't shut down with external HD connected (if it's been used)
B) there are disk permissions that can't be fixed SUID stuff ..
C) I have now verified the Mac HD and it tells me it's corrupt in bold red writing and to start up from install DVD
D) it won't boot from DVD so I cannot run the repair , initially the machine was spitting it out on start up , now it appears to be attempting to boot off DVD , well it sounds like it is .... BUT it's hanging with the Mac Logo and a wheel ... For um .... 30min now...
E) weirdly when OSX is booted off the hard drive , it won't recognise the Install DvD or the applications one... It just spits them out....
I had an old PPC 17" and it was a beaut .... Never had a single problem with it ...
I bought this one December 2010 and it's been nothing but issues for a computer in excess of £1000 I'm extremely disappointed ... And weirdly the shutting down issue started when it was a week out of warrantee ... I feel conned and am almost at the point of throwing it at a wall and buying a PC

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

IMovie HD won't import from Sony HDR-HC1

iMovie HD 5.0.2 (111) on my G5 desktop controls, but won't import from, my new little Sony HDR-HC1 1080i DV camcorder. Same was the case with my 12" 1 GHz PowerBook until, at the advice of a Manhattan Beach Genius Bar tech, I did an archive reinstall of 10.4 and a reinstall of iMovie HD on both my G5 PowerMac and G4 PowerBook and then downloaded all the updates. Now my PowerBook works, but my PowerMac still won't import. On an empty second HD in my PowerMac I installed OS 10.4 and iMovie HD ONLY (to create as sterile as possible of an environment), made the 2nd HD my startup drive, and still iMovie HD on my PowerMac will not import from this camera (although it will from an older Sony VX-1000 regular def camcorder).
Does anybody have any solutions, or any idea why iMovie HD now imports on my PowerBook but after the same makeover still won't on my PowerMac?
Per earlier posts, I tried playing some piano notes in Garage Band, trashing the iMovie preference files, and reinstalling QuickTime (the tech had heard QT 7.0.3 could be at fault from becoming corrupted in certain updating combinations), all to no avail.
HELP!
PowerMac G5 2 x 2.67 GHz Mac OS X (10.4.3)

I have had import/capture problems using FW drives with FCE/iMovie5 and my 2gig iMac. My canon GL2 works fine but only when no other FW devices are connected to the FW port I use the computers internal drive to capture. If your using the G5's internal SATA drives this (below) may not apply.
http://discussions.apple.com/thread.jspa?threadID=277702&tstart=0
http://discussions.apple.com/thread.jspa?threadID=277704&tstart=0
Some G5 users have had to purchase a FW PCI card or have the G5 front FW port replaced. Check this link.
http://www.xlr8yourmac.com/G5/G5usb_firewirereports.html
Cheers!
Steve

PowerMac won't reboot from CD

Similar Messages

Maybe you are looking for