Poweron issue
Hello all,
i have this poblem:
my scheduled poweron doesn't work.
i've yet trashed com.apple.autowake.plist and com.apple.powermanagement.plist
i have also edit crontab, scheduling pmset wakeorpoweron command, but my mac won't startup.
i think launchd has any problems.
any ideas?
thanks in advance.
no ideas?
Similar Messages
-
I have a iPhone 4s 64GB that has intermident wifi network issues. I have completely restored the phone and am running in factory configuration with only one app installed (ping utility)and am still experiencing the following issue. When using the network (safari, facetime, etc) the network will become unresponsive. If i start a ping from the device the to the network gateway I get no response. If I ping the iPhone from the computer I get no response. If I toggle airplane move on then off everything starts working and the device will start to function normally and respond to pings. This happens continually throughout the day to any network I am connected to. I have received a replacement device and still have the same issue. I have talked to apple numerous times and they still say it is hardware. I have also deployed 100 iphone 4s to our company and hear of similar issues. Has anyone else had this issue or found a resolution? I am a very big advocate of apple products but after this exprience I will no longer be upgrading to the latest and greatest. I have reverted to using my iPhone 4 with ios5 with no issues.
I have attached the console logs from my iphone that retrieved from the iPhone configuration utility from a time when the issue was occuring.
Nov 14 12:07:25 unknown lockdownd[22] <Error>: 0173b000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 0 (ID=103)
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 1 (ID=104)
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS: @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -48, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures = 0, age = 2498, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
Nov 14 12:07:29 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
Nov 14 12:07:29 unknown kernel[0] <Debug>:
Nov 14 12:09:05 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
Nov 14 12:09:05 unknown kernel[0] <Debug>: pmu wake events: wlan
Nov 14 12:09:05 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc143bc00]::UIMInitialize - HSIC ports enabled
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
Nov 14 12:09:05 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1321290545, last update = 1321290444
Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983343.00 -300 NO DST in 310
Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Nov 14 12:09:05 unknown MobileMail[79] <Warning>: message data temporarily unavailable for messageInfo: (1199, 5)
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
Nov 14 12:09:06 unknown kernel[0] <Debug>: [95599.463363125]: AppleBCMWLANCore::systemWokenByWiFi(): Wake reason = wlan
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::handleDataPacket(): Wake up packet received: Data
Nov 14 12:09:06 unknown kernel[0] <Debug>: Wakeup Packet: f0cba106a30c0050568952630800450001793a52400080063c29c0a80012c0a801a101bbccfffd1 21b7bd29b0c2c8018fe27ac9b00000101080a1785f7b13ca56e6f17030101403431c2351e7ee3052 e97886a25233433f1f1457a3c8b132c78c218cd508942bce0325b156c8c17222ab30cb4a99331401 b1d1bc0f1c4b8b21752b218d068570e097065786e60062250a26d351e541f5c291e6220cc053b5fd baa2d7abdbe7224eff815b5154dcb783dce8cd9a00a6da15cf4f5565355a80894f1d68cff527f54b 7ad7423fb8f39093a0ef40acf9c2de6eeb492f8f8ae20bd73b61b3a1b2df30cb982b941217fe8a34 08e01045804dc254da191d4b1f3a9d1cea7b9d192e61eda2473aed4a48f6c178c765b1f82c166521 e22a3a408893216761fa77b9388bcec9b2b8cd519ac9c8b053c00889c95b8003420dbb4561300eaf 6f6a59675db183260039f62eed7afb348d9fb3147238e116ad6ac4f1ebf5b22ee99b1cb92a5c3fb3 d43c25db5bfc761ea0feda538b53bedbaa0f948ac7c63f41822a8c5f882b400 (391 bytes)
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS: @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -47, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures = 0, age = 2499, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
Nov 14 12:09:06 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
Nov 14 12:09:06 unknown lockdownd[22] <Error>: 00386000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:09:08 unknown timed[2618] <Notice>: (Note ) CoreTime: Want active time in 34.48hrs. Need active time in 117.81hrs.
Nov 14 12:09:09 unknown MobileMail[79] <Warning>: message data temporarily unavailable for messageInfo: (1199, 5)
Nov 14 12:09:18 unknown timed[2618] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:09:19 from GPS because time is unchanged
Nov 14 12:09:23 unknown CommCenter[17] <Notice>: Telling CSI to go low power.
Nov 14 12:09:25 unknown lockdownd[22] <Error>: 0173b000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 0 (ID=103)
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 1 (ID=104)
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS: @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -50, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures = 0, age = 2523, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
Nov 14 12:09:29 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
Nov 14 12:09:29 unknown kernel[0] <Debug>:
Nov 14 12:11:25 unknown kernel[0] <Debug>: pmu wake events: menu
Nov 14 12:11:25 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
Nov 14 12:11:25 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1321290685, last update = 1321290564
Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983483.00 -300 NO DST in 310
Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Nov 14 12:11:26 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc143bc00]::UIMInitialize - HSIC ports enabled
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
Nov 14 12:11:26 unknown kernel[0] <Debug>: set_crc_notification_state 0
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS: @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -48, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures = 0, age = 2524, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
Nov 14 12:11:26 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
Nov 14 12:11:27 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:11:27 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:11:27 unknown lockdownd[22] <Error>: 016b9000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:11:28 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Nov 14 12:11:28 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Nov 14 12:11:28 unknown timed[2619] <Notice>: (Note ) CoreTime: Want active time in 34.44hrs. Need active time in 117.78hrs.
Nov 14 12:11:29 unknown configd[14] <Notice>: network configuration changed.
Nov 14 12:11:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:11:30 unknown CommCenter[17] <Notice>: No more assertions for PDP context 0. Returning it back to normal.
Nov 14 12:11:30 unknown CommCenter[17] <Notice>: Scheduling PDP tear down timer for (342983790.026476) (current time == 342983490.026488)
Nov 14 12:11:30 unknown wifid[29] <Error>: WiFi:[342983490.109759]: Client dataaccessd set type to background application
Nov 14 12:11:31 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|Could not find the current user principal. Found properties: [{
"DAV::displayname" = "[<CoreDAVLeafItem: 0xdea1ae0>]: DAV:displayname";
"DAV::principal-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xf1b79b0>]: DAV:principal-URL]
HREF: [[[<CoreDAVHrefItem: 0xdeb4b30>]: DAV:href]
Payload as original URL: [/calendar/dav/[email protected]/user/]
Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]
Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
"urn:ietf:params:xml:ns:caldav:calendar-home-set" = "[[<CoreDAVItemWithHrefChildren: 0xf1b6f30>]: urn:ietf:params:xml:ns:caldavcalendar-home-set]
Number of HREFs: [1]
Unauthenticated: [(null)]";
"urn:ietf:params:xml:ns:caldav:calendar-user-address-set" = "[[<CoreDAVItemWithHrefChildren: 0xde8f6f0>]: urn:ietf:params:xml:ns:caldavcalendar-user-address-set]
Number of HREFs: [2]
Unauthenticated: [(null)]";
"urn:ietf:params:xml:ns:caldav:schedule-inbox-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xde755f0>]: urn:ietf:params:xml:ns:caldavschedule-inbox-URL]
HREF: [[[<CoreDAVHrefItem: 0xdeb4de0>]: DAV:href]
Payload as original URL: [/calendar/dav/anyoneemail.com/inbox/]
Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/inbox///[email protected]/calendar/dav/anyoneemail.com/inbox/]
Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
"urn:ietf:params:xml:ns:caldav:schedule-outbox-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xdeac3a0>]: urn:ietf:params:xml:ns:caldavschedule-outbox-URL]
HREF: [[[<CoreDAVHrefItem: 0xdeb7450>]: DAV:href]
Payload as original URL: [/calendar/dav/anyoneemail.com/outbox/]
Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/outbox///[email protected]/calendar/dav/anyoneemail.com/outbox/]
Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
Nov 14 12:11:32 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|There were some failures changing properties, according to the following response: [[[<CoreDAVResponseItem: 0xf2dfd20>]: DAV:response | Number of HREFs: [1]| Status: [(null)]| Number of prop stats: [1]| Error: [(null)]| Response description: [(null)]| Location: [(null)]]].
Nov 14 12:11:34 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:19 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:11:38 unknown timed[2619] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:11:39 from GPS because time is unchanged
Nov 14 12:11:42 unknown wifid[29] <Error>: WiFi:[342983502.660924]: Client itunesstored is background application
Nov 14 12:12:29 unknown wifid[29] <Error>: WiFi:[342983549.925022]: Disable WoW requested by "apsd"
Nov 14 12:12:29 unknown wifid[29] <Error>: WiFi:[342983549.927995]: Disable WoW requested by "dataaccessd"
Nov 14 12:12:37 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Nov 14 12:12:37 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->255
Nov 14 12:13:38 unknown profiled[2629] <Notice>: (Note ) profiled: Service starting...
Nov 14 12:13:38 unknown profiled[2629] <Notice>: (Note ) profiled: Locking device
Nov 14 12:13:39 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Nov 14 12:13:43 unknown CommCenter[17] <Notice>: Telling CSI to go low power.
Nov 14 12:13:44 unknown lockdownd[22] <Error>: 016b9000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:timer fired
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(0)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:Removing timer
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 0 (ID=103)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 1 (ID=104)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS: @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -42, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures = 0, age = 2667, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
Nov 14 12:13:48 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
Nov 14 12:13:48 unknown kernel[0] <Debug>:
Nov 14 12:14:20 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Nov 14 12:14:20 unknown kernel[0] <Debug>: pmu wake events: menu
Nov 14 12:14:20 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc199f000]::UIMInitialize - HSIC ports enabled
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983659.00 -300 NO DST in 310
Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
Nov 14 12:14:21 unknown kernel[0] <Debug>: set_crc_notification_state 0
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS: @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -40, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures = 0, age = 2668, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
Nov 14 12:14:21 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
Nov 14 12:14:21 unknown lockdownd[22] <Error>: 016b9000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:14:22 unknown profiled[2629] <Notice>: (Note ) profiled: Device unlock notification received
Nov 14 12:14:23 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Nov 14 12:14:23 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Nov 14 12:14:23 unknown timed[2631] <Notice>: (Note ) CoreTime: Want active time in 34.39hrs. Need active time in 117.73hrs.
Nov 14 12:14:33 unknown Preferences[1862] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Nov 14 12:14:33 unknown timed[2631] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:14:34 from GPS because time is unchanged
Nov 14 12:14:34 unknown Preferences[1862] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x13d7b0:<VPNBundleController: 0x13d7b0>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Nov 14 12:14:34 unknown com.apple.misd[2635] <Notice>: allowing special port forwarding for test fixtures
Nov 14 12:14:41 unknown Preferences[1862] <Warning>: BTM: attaching to BTServer
Nov 14 12:14:41 unknown Preferences[1862] <Warning>: BTM: posting notification BluetoothAvailabilityChangedNotification
Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
Nov 14 12:15:01 unknown CommCenter[17] <Notice>: removing received message 2147483663
Nov 14 12:15:22 unknown profiled[2629] <Notice>: (Note ) profiled: Idled.
Nov 14 12:15:22 unknown profiled[2629] <Notice>: (Note ) profiled: Service stopping.
Nov 14 12:15:38 unknown kernel[0] <Debug>: launchd[2643] Builtin profile: container2 (sandbox)
Nov 14 12:15:38 unknown kernel[0] <Debug>: launchd[2643] Container: /private/var/mobile/Applications/E45DB0BB-3802-413A-B858-D5EE2F5C8DFF [69] (sandbox)
Nov 14 12:15:38 unknown wifid[29] <Error>: WiFi:[342983738.764213]: Client itunesstored is background application
Nov 14 12:15:41 unknown UIKitApplication:com.apple.iBooks[0xdd89][2643] <Notice>: DictinaryServices: Dictionary cache was updated
Nov 14 12:19:40 unknown kernel[0] <Debug>: 096088.069853 hsic-baseband::portActionGated: start device 0x00020001 (bus 1 port 2) completed with 0xe00002ed, retrying in 50ms
Nov 14 12:20:50 unknown wifid[29] <Error>: WiFi:[342984050.417001]: Client dataaccessd set type to background application
Nov 14 12:21:11 unknown lockdownd[22] <Error>: 00386000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:21:11 unknown com.apple.mobile.lockdown[22] <Notice>: Could not shutdown SSL connection: -9806
Nov 14 12:21:53 unknown wifid[29] <Error>: WiFi:[342984113.211059]: Client itunesstored is background application
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."} 0xde94790
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|Error refreshing properties for account: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Warn |CalDAV refresh task failed wih error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Warn |==== CalDAV refresh FAILED for "email" (8B3B7412-5AB7-4636-85FC-0613452101C4): Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}.
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|CoreDAVPropFindTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
Nov 14 12:23:24 unknown kernel[0] <Debug>: launchd[2659] Builtin profile: PasteBoard (sandbox)
Nov 14 12:23:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->1
Nov 14 12:23:25 unknown MobileSMS[117] <Error>: clip: empty path.
Nov 14 12:23:25 unknown UIKitApplication:com.apple.MobileSMS[0x1a48][117] <Notice>: Nov 14 12:23:25 users-iPhone MobileSMS[117] <Error>: clip: empty path.
Nov 14 12:23:26 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xd6ebe90 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xd6c7a50 "The request timed out."} 0x112d18d0
Nov 14 12:23:26 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xd6ebe90 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xd6c7a50 "The request timed out."}
Nov 14 12:23:29 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 1->3
Nov 14 12:23:29 unknown MobileSMS[117] <Warning>: Trying to remove already removed image
Nov 14 12:23:33 unknown MobileSMS[117] <Error>: CGAffineTransformInvert: singular matrix.
Nov 14 12:23:33 unknown UIKitApplication:com.apple.MobileSMS[0x1a48][117] <Notice>: Nov 14 12:23:33 users-iPhone MobileSMS[117] <Error>: CGAffineTransformInvert: singular matrix.
Nov 14 12:23:40 unknown imagent[49] <Warning>: [Warning] Async loading of bag failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xeeb64c0 {NSErrorFailingURLStringKey=http://init-p01md.apple.com/bag, NSErrorFailingURLKey=http://init-p01md.apple.com/bag, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xee9e340 "The request timed out."}
Nov 14 12:23:40 unknown imagent[49] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
Nov 14 12:23:45 unknown SpringBoard[15] <Notice>: Connection to the change hub got interrupted.
Nov 14 12:23:49 unknown wifid[29] <Error>: WiFi:[342984229.632067]: Client itunesstored is background application
Nov 14 12:24:28 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:36 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:47 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x113bdf50 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113b5750 "The request timed out."} 0x1127a260
Nov 14 12:24:47 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x113bdf50 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113b5750 "The request timed out."}
Nov 14 12:26:07 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x2c7230 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x2a0b10 "The request timed out."} 0x11257260
Nov 14 12:26:07 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x2c7230 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x2a0b10 "The request timed out."}
Nov 14 12:26:31 unknown imagent[49] <Warning>: [Warning] Async loading of bag failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x19b500 {NSErrorFailingURLStringKey=http://init-p01md.apple.com/bag, NSErrorFailingURLKey=http://init-p01md.apple.com/bag, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x18d740 "The request timed out."}
Nov 14 12:26:31 unknown imagent[49] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
Nov 14 12:31:45 unknown kernel[0] <Debug>: launchd[2681] Builtin profile: container (sandbox)
Nov 14 12:31:45 unknown kernel[0] <Debug>: launchd[2681] Container: /private/var/mobile/Applications/DD219E23-801C-44FF-A939-FC1E23D7B5CD [69] (sandbox)
Nov 14 12:31:48 unknown Ping[2681] <Warning>: WARNING: Using legacy cell layout due to delegate implementation of tableView:accessoryTypeForRowWithIndexPath: in <myping: 0x161090>. Please remove your implementation of this method and set the cell properties accessoryType and/or editingAccessoryType to move to the new cell layout behavior. This method will no longer be called in a future release.
Nov 14 12:31:49 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x11344bc0 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113fb400 "The request timed out."} 0x2f3eb0
Nov 14 12:31:49 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x11344bc0 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113fb400 "The request timed out."}
Nov 14 12:32:48 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Nov 14 12:32:48 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->255
Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
Nov 14 12:33:02 unknown kernel[0] <Debug>: set_crc_notification_state 0
Nov 14 12:33:11 unknown com.apple.misd[2685] <Notice>: allowing special port forwarding for test fixtures
Nov 14 12:33:13 unknown profiled[2686] <Notice>: (Note ) profiled: Service starting...
Nov 14 12:33:13 unknown Preferences[1862] <Warning>: loadAPTableCellImages: loading images
Nov 14 12:33:15 unknown Preferences[1862] <Warning>: -[APSettingsController specifiers]: CMSFLWLAN: _canForget(1), _canSetAutoJoin(0), _canSetAutoLogin(0)
Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 1
Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType USBHost
Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Nov 14 12:33:23 unknown kernel[0] <Debug>: launchd[2688] Builtin profile: ptpd (sandbox)
Nov 14 12:33:23 unknown lockdownd[22] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0xfe164d0 [0x3fced630]>{type = mutable dict, count = 5,
entries =>
1 : <CFString 0xfe2dc20 [0x3fced630]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0xfe16770 [0x3fced630]>{contents = "310410438874235"}
2 : <CFString 0xfe1cd20 [0x3fced630]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0xfe2cd90 [0x3fced630]>{contents = "012937000519404"}
4 : <CFString 0xfe2e1b0 [0x3fced630]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0xfe2e1e0 [0x3fced630]>{contents = "89014103254388742359"}
11 : <CFString 0xfe2d750 [0x3fced630]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0xfe2cd90 [0x3fced630]>{contents = "012937000519404"}
12 : <CFString 0xfe2e280 [0x3fced630]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0xfe16770 [0x3fced630]>{contents = "310410438874235"}
Nov 14 12:33:23 unknown lockdownd[22] <Error>: 00386000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
Nov 14 12:33:24 unknown atc[2690] <Warning>: Error: Connection invalid
Nov 14 12:33:28 unknown ptpd[2688] <Notice>: PTP interface has been activated at high speed.
Nov 14 12:33:37 unknown lockdownd[22] <Error>: 0173b000 special_case_get_domain: NN: checking BT MAC Address reported back f0:cb:a1:06:a3:0d
Nov 14 12:33:38 users-iPhone mc_mobile_tunnel[2700] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Nov 14 12:33:38 users-iPhone mc_mobile_tunnel[2700] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.*228 option 2 might work. All phones can be different.
-
When system is switch on(poweron) long beep and display is coming after hour
hello sir
when system is switch on(poweron) long beep and display is coming after hour
This question was solved.
View Solution.Hello @anandgopinainar,
I am not quite sure what you are trying to say here. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
As well if you could please elaborate on what is going on so that I understand it would help as well.
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
LDOM Issue on T2000 ldmd cannot communicate with the hypervisor as the re
Hi,
There were some issues with old primary LDOM at T2000 so I installed
new o/s 64 bit on SUN SPARC T2000 and reset SC on factor-default and
also installed LDOM 1.2 version. Seems like old hypervisor is not
deleted.
Now I am getting error.
#ldm list
Failed to connect to logical domain manager: Connection refused
So far I have trying the following steps. but still no luck
I installed version 1.2 LDOM. and also I updated SC. Plus I installed
below patches:
•118833-36, Kernel update patch
•124921-02, which contains updates to the Logical Domains 1.0 drivers
and utilities
•125043-01, which contains updates to the qcn (console) drivers.
SC> bootmode config="factory-default"
SC> poweroff
SC> resetsc -y
SC> poweron
Now I tried everything but still no luck
Here are some errot which I am getting
#Svcs -xv
[ Oct 5 00:07:14 Method "start" exited with status 96 ]
[ Oct 5 00:32:11 Leaving maintenance because disable requested. ]
[ Oct 5 00:32:11 Disabled. ]
[ Oct 5 00:32:21 Enabled. ]
[ Oct 5 00:32:21 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
Service LOG file Info:
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
[ Oct 5 00:32:21 Method "start" exited with status 96 ]
[ Oct 5 00:43:54 Leaving maintenance because disable requested. ]
[ Oct 5 00:43:54 Disabled. ]
[ Oct 5 00:45:19 Enabled. ]
[ Oct 5 00:45:19 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
[ Oct 5 00:45:19 Method "start" exited with status 96 ]
[ Oct 5 00:45:19 Rereading configuration. ]
bash-3.00# cd /opt/SUNWldm/bin/
bash-3.00# ls
ldm ldmconfig ldmd ldmd_start schemas
bash-3.00# ./ldmd_start
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
bash-3.00# ldm
Failed to connect to logical domain manager: Connection refused
bash-3.00# sc>
sc> showhost
Sun-Fire-T2000 System Firmware 6.7.12 2011/07/06 20:03
Host flash versions:
OBP 4.30.4.d 2011/07/06 14:29
Hypervisor 1.7.3.c 2010/07/09 15:14
POST 4.30.4.b 2010/07/09 14:24
bash-3.00#
bash-3.00# uname -a
SunOS ldom-srv 5.10 Generic_118833-36 sun4v sparc SUNW,Sun-Fire-T200
Thanks in advanceHi,
There were some issues with old primary LDOM at T2000 so I installed
new o/s 64 bit on SUN SPARC T2000 and reset SC on factor-default and
also installed LDOM 1.2 version. Seems like old hypervisor is not
deleted.
Now I am getting error.
#ldm list
Failed to connect to logical domain manager: Connection refused
So far I have trying the following steps. but still no luck
I installed version 1.2 LDOM. and also I updated SC. Plus I installed
below patches:
•118833-36, Kernel update patch
•124921-02, which contains updates to the Logical Domains 1.0 drivers
and utilities
•125043-01, which contains updates to the qcn (console) drivers.
SC> bootmode config="factory-default"
SC> poweroff
SC> resetsc -y
SC> poweron
Now I tried everything but still no luck
Here are some errot which I am getting
#Svcs -xv
[ Oct 5 00:07:14 Method "start" exited with status 96 ]
[ Oct 5 00:32:11 Leaving maintenance because disable requested. ]
[ Oct 5 00:32:11 Disabled. ]
[ Oct 5 00:32:21 Enabled. ]
[ Oct 5 00:32:21 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
Service LOG file Info:
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
[ Oct 5 00:32:21 Method "start" exited with status 96 ]
[ Oct 5 00:43:54 Leaving maintenance because disable requested. ]
[ Oct 5 00:43:54 Disabled. ]
[ Oct 5 00:45:19 Enabled. ]
[ Oct 5 00:45:19 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
[ Oct 5 00:45:19 Method "start" exited with status 96 ]
[ Oct 5 00:45:19 Rereading configuration. ]
bash-3.00# cd /opt/SUNWldm/bin/
bash-3.00# ls
ldm ldmconfig ldmd ldmd_start schemas
bash-3.00# ./ldmd_start
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
bash-3.00# ldm
Failed to connect to logical domain manager: Connection refused
bash-3.00# sc>
sc> showhost
Sun-Fire-T2000 System Firmware 6.7.12 2011/07/06 20:03
Host flash versions:
OBP 4.30.4.d 2011/07/06 14:29
Hypervisor 1.7.3.c 2010/07/09 15:14
POST 4.30.4.b 2010/07/09 14:24
bash-3.00#
bash-3.00# uname -a
SunOS ldom-srv 5.10 Generic_118833-36 sun4v sparc SUNW,Sun-Fire-T200
Thanks in advance -
Netra T1 105, issue with LOM prompt
Hello all,
I am having issue in accessing OK prompt from LOM menu. When I do the poweron, it sits on LOM event: power on. When I do, console it shows stand by. Please help me out here as I am working on making this server to respond. Thanks.Hi. Could you tell me if patches 108620-04 or higher & 108673-02 or higher are already installed on the Netra t1 105?
*How to determine if the Netra[TM]T1 model 105 server PROM patches are current [ID 1010561.1]*
Description
How to determine if patches 108620-04 or higher & 108673-02 or higher are already installed on the Netra t1 105.
Steps to Follow
These two patches have to do with OBP(OpenBoot PROM) and the user prom.
108620-04 Hardware/PROM: Netra t1 Standalone User PROM Update
108673-02 Hardware/PROM: Netra t1 System PROM Update
108673-02 delivers OBP 3.10.27.
This can be checked via the OBP with the .version command.
OBP Example:
ok .version
Release 3.10.27 ME created 2000/06/22 16:45
OBP 3.10.27 2000/06/22 16:45
POST 1.17.0 2000/03/06 12:18
This can be checked via Solaris[TM] with: prtconf -V
Solaris[TM] Example:
# prtconf -V
OBP 3.10.27 2000/06/22 16:45
If you see Release 3.10.27 you do not need to install this patch.
108620-04 delivers the dropins
These can be checked at the ok prompt with the show-dropins command.
Example:
ok show-dropins
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,0
Dropin name Size Checksum Date Date Version Vendor
created flashed
OBP 4a1bc cc30 06/22/2000 3.10.27
keyboards bf0 dd75
fonts af6 6b86
obdiag bd34 aec5
pci1002,5654 d34 7190
pci1002,4755 cb0 c382
pci1002,4750 1794 3f65
class060400 44e 17cc
userprom 246 b3ba
pci108e,1001 32a4 d714
pci1011,22 47e 69c9
pci1000,3 2824 feb4
class010100 1210 ce35
i2c 1fe 5a8f
i2c-cs2 1f4 bd2a
nvinit- 172 0 10/08/1999 00/00/0 0.0
POST 45340 519 03/06/2000 1.17.0
PROM size = 100000 bytes Available for Use = 3d958 bytes
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,400000
Dropin name Size Checksum Date Date Version Vendor
created flashed
ebus-14.400000 b0 9fa6 06/09/1999 06/09/1999 1.0
SUNW,flapjack
probe+ 250 c2b5 01/06/2000 01/06/2000 2.0
SUNW,flapjack
banner- 1aa 6f35 12/10/1999 12/10/1999 1.0
SUNW,flapjack
tty-control 150 a863 12/01/1999 12/01/1999 1.0
SUNW,Flapjack
PROM size = 200000 bytes Available for Use = 1ff984 bytes
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,800000
Dropin name Size Checksum Date Date Version Vendor
created flashed
PROM size = 200000 bytes Available for Use = 200000 bytes
ok
The part that is of interest is about two thirds of the way down to do
with ebus-14.400000, probe+, banner- and tty-control.
If the Checksum matches you you don't need to install this patch.
On the other hand it won't cause any problems to reinstall both patches. -
U310 Windows 7 boot issue - black screen
Hi
my u310 w7 500Go i3 I bought less than two months ago got problems since some time already for booting. Nothing happens except Caps light blink on the keyboard + power and battery lights. Only black screen (no bios, lenovo message whatever)
Until now I was able to get it back 3 times after 'trying' a number of times (30 ?) pressing the power button on/off or just waiting. One time I just waited for 1 hour and it was booting on the first press of power button. This time I am about to give up.
I have tried to press F2, F8, F10,F12 just after poweron (not sure if i have to use function key or not at that time, i set it back in bios to'normal' mode with Fn)
I tried with power cable plugged/unpluged.
I tried connecting an external DVD drive with W7 recovery disk. I tried to press recovery button. Nothing happens. (DVD drive lights up)
help would be much appreciated!
thanks
herveyHi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Please try disconnecting all cable and battery from the unit , Now press the power button for 30-40 sec then release , perform this action 4 -5 times , now connect AC adaptor to check by powering on and booting the system. If system is working fine you can shut down and connect the battery to check
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español -
Oracle 10g RAC install issues on VMware
Hello,
I have 2 virtual machines (VMs) configured each as follows:
- 1 local disk 20GB on SCSI 0:0 partition type is ext3
- 4 shared disk. partition type for each disk is OCFS2
- OCR 0.5 GB on SCSI1:0
- Voting 0.5 GB on SCSI1:1
- Database Data 10 GB on SCSI1:2
- dB flash recovery 20 GB on SCSI1:3
- 2 ethernet interface (1 bridged, 1 host-only)
- CD-ROM
- 700 MB memory
Each VM is able to read/write to the shared disks. Here is the contents of each vmx file
RAC1
#!/usr/bin/vmware
config.version = "8"
virtualHW.version = "4"
scsi0.present = "TRUE"
scsi0.virtualDev = "lsilogic"
memsize = "700"
scsi0:0.present = "TRUE"
scsi0:0.fileName = "localdisk.vmdk"
scsi0:0.writeThrough = "TRUE"
ide1:0.present = "TRUE"
ide1:0.fileName = "/dev/hda"
ide1:0.deviceType = "cdrom-raw"
floppy0.startConnected = "FALSE"
floppy0.fileName = "/dev/fd0"
Ethernet0.present = "TRUE"
displayName = "shared-rac1"
guestOS = "rhel4"
priority.grabbed = "normal"
priority.ungrabbed = "normal"
disk.locking = "FALSE"
diskLib.dataCacheMaxSize = "0"
scsi1.sharedBus = "virtual"
powerType.powerOff = "hard"
powerType.powerOn = "hard"
powerType.suspend = "hard"
powerType.reset = "hard"
scsi1.present = "TRUE"
scsi1.virtualDev = "lsilogic"
scsi1:0.present = "TRUE"
scsi1:0.fileName = "/var/lib/vmware/Virtual_Machines/rac/sharedstorage/crs.vmdk"
scsi1:0.mode = "independent-persistent"
scsi1:0.deviceType = "disk"
scsi1:1.present = "TRUE"
scsi1:1.fileName = "/var/lib/vmware/Virtual_Machines/rac/sharedstorage/voting.vmdk"
scsi1:1.mode = "independent-persistent"
scsi1:1.deviceType = "disk"
scsi1:2.present = "TRUE"
scsi1:2.fileName = "/var/lib/vmware/Virtual_Machines/rac/sharedstorage/dbData.vmdk"
scsi1:2.mode = "independent-persistent"
scsi1:2.deviceType = "disk"
scsi1:3.present = "TRUE"
scsi1:3.fileName = "/var/lib/vmware/Virtual_Machines/rac/sharedstorage/dbFlashRecovery.vmdk"
scsi1:3.mode = "independent-persistent"
scsi1:3.deviceType = "disk"
floppy0.present = "FALSE"
Ethernet1.present = "TRUE"
Ethernet1.connectionType = "hostonly"
uuid.location = "56 4d e6 e2 77 57 0b 3d-94 69 08 da df 9c f1 20"
uuid.bios = "56 4d e6 e2 77 57 0b 3d-94 69 08 da df 9c f1 20"
scsi0:0.redo = ""
scsi1:0.redo = ""
scsi1:1.redo = ""
scsi1:2.redo = ""
scsi1:3.redo = ""
ethernet0.addressType = "generated"
ethernet1.addressType = "generated"
ethernet0.generatedAddress = "00:0c:29:9c:f1:20"
ethernet0.generatedAddressOffset = "0"
ethernet1.generatedAddress = "00:0c:29:9c:f1:2a"
ethernet1.generatedAddressOffset = "10"
ide1:0.startConnected = "TRUE"
tools.syncTime = "TRUE"
Ethernet2.present = "FALSE"
Ethernet2.connectionType = "hostonly"
ethernet2.addressType = "generated"
ethernet2.generatedAddress = "00:0c:29:9c:f1:34"
ethernet2.generatedAddressOffset = "20"RAC2
#!/usr/bin/vmware
config.version = "8"
virtualHW.version = "4"
scsi0.present = "TRUE"
scsi0.virtualDev = "lsilogic"
memsize = "700"
scsi0:0.present = "TRUE"
scsi0:0.fileName = "localdisk.vmdk"
scsi0:0.writeThrough = "TRUE"
ide1:0.present = "TRUE"
ide1:0.fileName = "/dev/hda"
ide1:0.deviceType = "cdrom-raw"
floppy0.startConnected = "FALSE"
floppy0.fileName = "/dev/fd0"
Ethernet0.present = "TRUE"
displayName = "shared-rac2"
guestOS = "rhel4"
priority.grabbed = "normal"
priority.ungrabbed = "normal"
powerType.powerOff = "hard"
powerType.powerOn = "hard"
powerType.suspend = "hard"
powerType.reset = "hard"
disk.locking = "false"
diskLib.dataCacheMaxSize = "0"
scsi1.sharedBus = "virtual"
scsi1.present = "TRUE"
scsi1:0.present = "TRUE"
scsi1:0.fileName = "/var/lib/vmware/Virtual_Machines/rac/sharedstorage/crs.vmdk"
scsi1:0.mode = "independent-persistent"
scsi1:0.deviceType = "disk"
scsi1:1.present = "TRUE"
scsi1:1.fileName = "/var/lib/vmware/Virtual_Machines/rac/sharedstorage/voting.vmdk"
scsi1:1.mode = "independent-persistent"
scsi1:1.deviceType = "disk"
scsi1:2.present = "TRUE"
scsi1:2.fileName = "/var/lib/vmware/Virtual_Machines/rac/sharedstorage/dbData.vmdk"
scsi1:2.mode = "independent-persistent"
scsi1:2.deviceType = "disk"
scsi1:3.present = "TRUE"
scsi1:3.fileName = "/var/lib/vmware/Virtual_Machines/rac/sharedstorage/dbFlashRecovery.vmdk"
scsi1:3.mode = "independent-persistent"
scsi1:3.deviceType = "disk"
scsi1.virtualDev = "lsilogic"
floppy0.present = "FALSE"
Ethernet1.present = "TRUE"
Ethernet1.connectionType = "hostonly"
scsi0:0.redo = ""
scsi1:0.redo = ""
scsi1:1.redo = ""
scsi1:2.redo = ""
scsi1:3.redo = ""
ide1:0.startConnected = "TRUE"
ethernet0.addressType = "generated"
ethernet1.addressType = "generated"
uuid.location = "56 4d 52 90 f0 35 50 a3-08 04 7d 41 6a e8 e5 c7"
uuid.bios = "56 4d 52 90 f0 35 50 a3-08 04 7d 41 6a e8 e5 c7"
ethernet0.generatedAddress = "00:0c:29:e8:e5:c7"
ethernet0.generatedAddressOffset = "0"
ethernet1.generatedAddress = "00:0c:29:e8:e5:d1"
ethernet1.generatedAddressOffset = "10"
tools.syncTime = "TRUE"
Ethernet2.present = "FALSE"
Ethernet2.connectionType = "hostonly"
ethernet2.addressType = "generated"
ethernet2.generatedAddress = "00:0c:29:e8:e5:db"
ethernet2.generatedAddressOffset = "20"I was successfully able to install Clusterware and a database, however I get an error when I attempt to run the dB the second instance. The first instances runs without any issues.
Here is the error message the first time I started the second instance
[oracle@shared-rac2 ~]$ srvctl start instance -d mddb -i mddb2
PRKP-1001 : Error starting instance mddb2 on node shared-rac2
CRS-0215: Could not start resource 'ora.mddb.mddb2.inst'.However, the second time I attempted to start the instance, the following error was generated:
[oracle@shared-rac2 ~]$ srvctl start instance -d mddb -i mddb2
PRKP-1001 : Error starting instance mddb2 on node shared-rac2
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.mddb.mddb2.inst' has placement error.
crs_stat -t indicates:
[oracle@shared-rac2 ~]$ /u01/app/oracle/product/10.2.0/crs/bin/crs_stat -t
Name Type Target State Host
ora.mddb.db application ONLINE ONLINE shared-rac2
ora....b1.inst application ONLINE ONLINE shared-rac1
ora....b2.inst application ONLINE UNKNOWN shared-rac2
ora....C1.lsnr application ONLINE ONLINE shared-rac1
ora....ac1.gsd application ONLINE ONLINE shared-rac1
ora....ac1.ons application ONLINE ONLINE shared-rac1
ora....ac1.vip application ONLINE ONLINE shared-rac1
ora....C2.lsnr application ONLINE ONLINE shared-rac2
ora....ac2.gsd application ONLINE ONLINE shared-rac2
ora....ac2.ons application ONLINE ONLINE shared-rac2
ora....ac2.vip application ONLINE ONLINE shared-rac2After attempting to start the instance the second time, srvctl indicates:
[oracle@shared-rac2 ~]$ srvctl status database -d mddb
Instance mddb1 is running on node shared-rac1
PRKO-2015 : Error in checking condition of instance on node: shared-rac2Has anyone ever encountered this issue before? If so, is there a workaround or a solution to overcome this?
Is this a VMWare interaction issue or is it related to Oracle?
I've been stuck at this for quite a while now and any help is tremendously appreciated.
Message was edited by:
bassamkh
Added srvctl outputHello,
I monitored the following file when starting the second instance.
- /u01/app/oracle/product/10.2.0/crs/log/shared-rac2/alertshared-rac1.log (on RAC1)
- /u01/app/oracle/product/10.2.0/crs/log/shared-rac2/alertshared-rac2.log (on RAC2)
There was no output generated.
Regarding the article you sent, I did not follow it, however I followed this article: http://www.oracle.com/technology/pub/articles/chan-ubl-vmware.html
I did not follow it step by step as I do not want ASM in my testing environment. However, the concepts have been used as described and in the same order. All of the shared disks are Oracle Clusterware Filesystem (OCFS2). -
Hi All
Okay here it is. Is it possible that an iMac USB keyboard
can screw up the power supply or bung something up within
the iMac?
Here's the back story. I inherited a G3 Lime iMac from a
former employer for my son. It worked fine for a while and
then, when it would boot up it would just shut off after
the chime and Apple icon. I replaced the PRAM battery,
checked for faulty RAM, etc etc... and deduced it as being
an old system and the power supply just went on it...
Now, I just bought a G3 400 Strawberry, supposedly in working
order, booted it up fine (with the previous keyboard and
puck mouse plugged in). FOund that the CD drive would not
accept a CD (so I have to remove it and see if there's one
stuck in it).
THe issue came when I tried to eject using the mouse on
start up. I held it down and it shut down the computer.
I turned it back on and it shut down after the chime and
Apple logo, just like the Lime one from above! I remove
the keyboard/mouse tried a restart, same thing. I unplugged
it, plugged it back in and restarted, and it booted fine.
I restarted again just to be safe and it shut down again.
Did the Keyboard/mouse screw something up? Has anyone ever
heard of this? I'm confused and frustrated.
ANy help or suggestions would be appreciated.
Thanks
SteveSteve Smiley wrote:
Hi Gentlemen
Thanks for the responses.
I'm kinda ****** that this is happening now. Just wanted an older
Mac for my son to play some OS9 Reader rabbit games The imac was
the perfect choice because he can't do much damage to it (especially
the monitor).
"SheepShaver is an Open Source PowerPC MacOS run-time environment. That is, it enables you to run PowerPC Classic MacOS software on your computer, even if you are using a different operating system. However, you still need a copy of MacOS and a PowerMacintosh ROM image to use this program. SheepShaver is distributed under the terms of the GNU General Public License (GPL). "
http://gwenole.beauchesne.info/en/projects/sheepshaver
Installing Mac OS Classic on SheepShaver is a struggle. There is some instability once you have completed the installation.
I checked the PRAM battery (was fine) reset the PMU, tried to eject CD using firmware,the weird thing is is that it won't start up with a keyboard attached (tried my original imac one and also my G5 iMac one) same issue... I have to unplug it, and reboot a few times for it to boot up... seems like the keyboard has something to do with it... maybe a USB port issue?
Does the keyboard work fine in Open firmware?
Here are in some other commands that you can do in open firmware.
Hold down command-option-o-f then poweron your machine. Continue holding until the Open Firmware screen appears.
#In case you have a cd you don't want. How to eject a cd from the internal cd drive:
eject cd
#insert the cd
mac-boot
#You will need to quickly press the and hold down the c key.
In case you act too late, shutdown your machine. Hold down the option key. This will bring up the startup manager. Power on your machine. Click on the dvd image. Click on the arrow icon.
List of devices:
devalias
List of variables
printenv
This is a quote from the web:
Sometimes if volumes don't appear in Startup Manager (what you get when you hold down the Option key at startup), you need to reset the Mac's PRAM, NVRAM, and Open Firmware. Shut down the Mac, then power it up, and before the screen lights up, quickly hold down the Command, Option, P, and R keys, until the Mac has chimed twice more after the powerup chime. Then, before the screen lights up, hold down Command-Option-O-F until the Open Firmware screen appears. Then enter these lines, pressing Return after each one:
reset-nvram
set-defaults
reset-all
Why set nvram variable? I've had open-firmware based Pegasos PPC and it simply had boot command, so instead of:
setenv boot-device ud:3,\:tbxi
should be enough to write:
boot ud:3,\:tbxi -
When will you fix battery issues on ios 5.1.1? I have the same settings but 85% less battery life!!!
I have read many tips about what to do for increasing battery life. However
I hav the same setting with ios 5.1.1 that I was using with the previous
version (ios 5.1) but with 85% less battery life time. It is so frustrating because this
issue come back every 2 update : one killing your battery and the second
to fix this, and it starts again... I am really sick of this.
I am using an iPhone 4.Hi All – I have also experienced the battery drain issue on upgrade to 5.1.1.
Like many on the forum I have tried ALL suggestions to resolve this issue, none of them have resolved the problem that Apple owners seem to be experiencing, it’s not in our minds as some suggest. My iPhone 4 and iPhone 3GS are working a treat under 5.1.1, in fact I believe the 3GS is running better than under 4.3.x.
However I do think I have tracked the problem down, which I will document here, but first a list of the things I’ve tried:
- Fully discharge battery to <5% and then back to 100% and leave charging for 3 hours after
- Turn off all notifications
- Turn off all location services
- Turn down brightness
- Turn off ALL iCloud services (effectively delete the account)
- Reconfigure email account to ‘MANUAL Fetch’ only
- Factory restore to fresh 5.1.1 from within iTunes and then restore from back-up
The only thing that stops the battery discharging at around 5% every 8 hours is turning off Wi-Fi during standby mode. Prior to 5.1.1 the iPad would drain maybe 1% every 24 hours in standby mode with Wi-Fi on.
Puzzled by this I did some research to understand what the iPad is doing whilst in standby mode with Wi-Fi on, so below is a trace from the iPad system log so that hopefully someone can look at this , identify the issue and hopefully fix it in a future ios 5.1.x release:
3 Jun 2012 12:02:43 - CommCenter [56] (Notice): Telling CSI to go low power.
3 Jun 2012 12:02:43 - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x18000, stateNum 0, dev 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::powerOff(): fStateFlags(34a22)
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 0 (ID=103)
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 1 (ID=104)
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLAN Sleeping on BSS: @ 0xc0e90800, BSSID = 4c:17:eb:55:b6:eb, rssi = -57, rate = 54 (100%), channel = 11, encryption = 0x8, ap = 1, failures = 0, age = 34, ssid[ 9] = "SKY67278"
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(0000002f)
3 Jun 2012 12:02:43 - kernel [0] (Debug): AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:02:43 - kernel [0] (Debug): (null)
3 Jun 2012 12:02:09 - CommCenter [56] (Notice): Telling CSI to exit low power.
3 Jun 2012 12:02:09 - kernel [0] (Debug): pmu wake events: wlan
3 Jun 2012 12:02:09 - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8002, stateNum 1, dev 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::powerOnSystem() : Powering On
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::powerOn(): stateFlags(24a23)
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANBusInterfaceSdio::powerOn()
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::powerOn(): Tearing down WoW mode
3 Jun 2012 12:02:09 - kernel [0] (Debug): [9395.720807416]: AppleBCMWLANCore::systemWokenByWiFi(): Wake reason = wlan
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::handleDataPacket(): Wake up packet received: Data
3 Jun 2012 12:02:09 - kernel [0] (Debug): Wakeup Packet: 40500428A49D4C18EB55B6DA08004500004e000040004011b948c0a80001c0a80005d3880089003 a67ef03e90000000100000000000020434b414141414141414141414141414141414141414141414 1414141414141410000210001 (92 bytes)
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLAN Woke on same BSS: @ 0xc0e90800, BSSID = 4c:17:eb:55:b6:eb, rssi = -60, rate = 54 (100%), channel = 11, encryption = 0x8, ap = 1, failures = 0, age = 34, ssid[ 9] = "SKY67278"
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
3 Jun 2012 12:02:09 - kernel [0] (Debug): en0: BSSID changed to 4c:17:eb:55:b6:eb
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleD1946PMUPowerSource: AppleUSBCableDetect 0
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleD1946PMUPowerSource: AppleUSBCableType Detached
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect
3 Jun 2012 12:02:09 - kernel [0] (Debug): AppleBaseband::resetDetectInterrupt with 0
3 Jun 2012 12:01:58 - CommCenter [56] (Notice): Telling CSI to go low power.
3 Jun 2012 12:01:58 - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x18000, stateNum 0, dev 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::powerOff(): fStateFlags(34a22)
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 0 (ID=103)
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 1 (ID=104)
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLAN Sleeping on BSS: @ 0xc0e90800, BSSID = 4c:17:eb:55:b6:eb, rssi = -59, rate = 54 (100%), channel = 11, encryption = 0x8, ap = 1, failures = 0, age = 34, ssid[ 9] = "SKY67278"
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(0000002f)
3 Jun 2012 12:01:58 - kernel [0] (Debug): AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:01:58 - kernel [0] (Debug): (null)
3 Jun 2012 12:01:24 - CommCenter [56] (Notice): Telling CSI to exit low power.
3 Jun 2012 12:01:24 - kernel [0] (Debug): pmu wake events: wlan
3 Jun 2012 12:01:24 - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8002, stateNum 1, dev 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0xc0a6a800 (this 1, provider 0)
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::powerOnSystem() : Powering On
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::powerOn(): stateFlags(24a23)
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANBusInterfaceSdio::powerOn()
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::powerOn(): Tearing down WoW mode
3 Jun 2012 12:01:24 - kernel [0] (Debug): [9360.861496125]: AppleBCMWLANCore::systemWokenByWiFi(): Wake reason = wlan
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::handleDataPacket(): Wake up packet received: Data
3 Jun 2012 12:01:24 - kernel [0] (Debug): Wakeup Packet: 40500428A49D4C18EB55B6DA08004500004e000040004011b948c0a80001c0a80005a9a50089003 a91d203e90000000100000000000020434b414141414141414141414141414141414141414141414 1414141414141410000210001 (92 bytes)
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLAN Woke on same BSS: @ 0xc0e90800, BSSID = 4c:17:eb:55:b6:eb, rssi = -61, rate = 54 (100%), channel = 11, encryption = 0x8, ap = 1, failures = 0, age = 34, ssid[ 9] = "SKY67278"
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
3 Jun 2012 12:01:24 - kernel [0] (Debug): en0: BSSID changed to 4c:17:eb:55:b6:eb
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleD1946PMUPowerSource: AppleUSBCableDetect 0
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleD1946PMUPowerSource: AppleUSBCableType Detached
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect
3 Jun 2012 12:01:24 - kernel [0] (Debug): AppleBaseband::resetDetectInterrupt with 0
These repeating messages appear approx every 30 seconds the wakeup packet contains the MAC addresses for my router and iPad, so one of them is misbehaving. This may be to do with how these have been implemented:
http://en.wikipedia.org/wiki/Wake-on-LAN
http://en.wikipedia.org/wiki/Sleep_Proxy_Service
Either way I believe this is the source of the power drain issue whilst in standby with Wi-Fi turned on, perhaps this could be a router issue and that is why the issue not hitting everyone post 5.1.1?
All the best. -
T2000 Service Console / ALOM Issue
Has anyone run into this issue:
sc> poweron
Host poweron is disabled due to:
Host flash image invalid, flashupdate required.
So I go, run flashupdate - everything completes as normal - no errors or anything out of the ordinary. I'll then reset the SC (I've used the resetsc command and just removing power) as per normal.
But once again i get:
sc> poweron
Host poweron is disabled due to:
Host flash image invalid, flashupdate required.
after the reset. I've tried 6.3.7 and 6.4.6 firmware releases and they both behave the same. clearfaults doesn't work either.
I've also replaced the battery on SC just in case.
I'm wondering if some how my SC has gone bad and I have to replace it or is there a trick to reset this fault?
cheers and thanks,
benI am getting the same message. Were you able to determine a fix?
Thanks,
Mike -
PowerOn Failed : Result - failed:errcode=20000, errmsg=No enough memory
Hi,
When I tried to start a VM from ovm manager I get this message 'PowerOn Failed : Result - failed:errcode=20000, errmsg=No enough memory to run vm'
As per this document (https://communities.oracle.com/portal/server.pt/community/view_document/217?docID=198299) I have tried these commands to increase memory
[root@ovm-rac-exp01 ~]# xm info | grep -E '^free_memory'
free_memory : 15590
[root@ovm-rac-exp01 ~]# /opt/ovs-agent-2.3/db/db_kv.py srv ovm-rac-exp01 -t int -f mem_free 15590
old: ovm-rac-exp01 => 0
new: ovm-rac-exp01 => 15590
but after a few seconds mem_free returns to 0
How can I set the mem_free parameter ?
ThanksI am experiencing the same behavior.
* The OVM server (2.2.2) in my test lab has 8GB physical memory with 563MB assigned to Dom0 per GRUB config: kernel /xen-64bit.gz dom0_mem=563M
* When attempting to start a single Windows 2008 (HVM) VM, allocated 1024MB, and with no other guest VM on the system I see the following in /var/log/ovs-agent/ovs_root.log:
"2011-10-18 12:35:28" DEBUG=> select_tgt_host: vm('/OVS/running_pool/W2K8_SVR01')=>memory=1024
"2011-10-18 12:35:28" ERROR=> select_tgt_host: faild. => errcode=20000, errmsg=No enough memory to run vm(/OVS/running_pool/W2K8_SVR01), required memory=1024.
StackTrace:
File "/opt/ovs-agent-2.3/OVSServerSelection.py", line 336, in select_tgt_host
raise OVSException(ERR_NO_MEMORY, {"vm_path": vm_path, "memory": memory})
"2011-10-18 12:35:28" ERROR=> start_vm: failed! vm('/OVS/running_pool/W2K8_SVR01') errcode=20000, errmsg=No enough memory to run vm(/OVS/running_pool/W2K8_SVR01), required memory=1024.
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 124, in start_vm
raise e
"2011-10-18 12:35:28" INFO=> OVSPolicyServer.execute_policy(): vm('/OVS/running_pool/W2K8_SVR01'), action=start_vm action_params=(vm_path, ) => failed:errcode=20000, errmsg=No enough memory to run vm(/OVS/running_pool/W2K8_SVR01), required memory=1024.
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 124, in start_vm
raise e
* There seems to be plenty of memory available:
# xm info | grep memory
total_memory : 8156
free_memory : 7490
node_to_memory : node0:7490
* Starting the VM manually using 'xm create' works:
# xm create /var/ovs/mount/C974E8A5DEFF4FD18CBD8D74BE9092D3/running_pool/W2K8_SVR01/vm.cfg
Using config file "/var/ovs/mount/C974E8A5DEFF4FD18CBD8D74BE9092D3/running_pool/W2K8_SVR01/vm.cfg".
Started domain W2K8_SVR01 (id=2)
* Memory usage seems as expected:
# xm list
Name ID Mem VCPUs State Time(s)
Domain-0 0 563 4 r..... 392.1
W2K8_SVR01 2 1024 1 ...... 1.2
# xm info | grep memory
total_memory : 8156
free_memory : 6453
node_to_memory : node0:6453
* Trying the procedure suggested here ( https://communities.oracle.com/portal/server.pt/community/view_document/217?docID=198299 ) is of no use as 'mem_free' reverts to value of zero within a few seconds. It seems the agent is re-reading what it thinks is total available memory (from where?) and updating the database. I tried stopping the agent, changing 'mem_free' value and then restarting the agent but it makes no difference. Not sure procedure in docID=198299 is supported anyway.
* Sorry I can't help much but at least you are not alone in experiencing this issue... -
Hi,
Customer has 11 physical OVM servers, due to power shutdown all the servers had get shutdown and user of the servers poweron-d one by one atlast 3 OVM servers are getting issue,
in VM manager all VM servers shows active.
11 Virtual OS's belongs to 3 OVM server showing error.
find the below error messages.
Start - /OVS/running_pool/113_HubRepFE
PowerOn Failed : Result - failed:errcode=00001, errmsg=CDS accquire lock /etc/ovs-agent/db/collect_srv_stat.lock timeout. locker process is 27936.
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 124, in start_vm
raise e
Start - /OVS/running_pool/113_HubRepFE
PowerOff successfully.
Update VNC Port - 0
Update Server - NULL
Update VM Status - Powered Off
Start - /OVS/running_pool/113_HubRepFE
PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/E99CCA2A4AEB418AB1098EFF19C12760/running_pool/113_HubRepFE/vm.cfg'] => Error: Unable to open config file: /var/ovs/mount/E99CCA2A4AEB418AB1098EFF19C12760/running_pool/113_HubRepFE/vm.cfg
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVM.py", line 57, in xen_start_vm
run_cmd(args=cmd)
File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 131, in start_vm
raise e
Kindly provide us the solution to resolve the issue
Regards
DravidanDravidan wrote:
Kindly provide us the solution to resolve the issueOpen an SR with Oracle Support. You will need to reset the ovs-agent's lock database and you need support to walk you through this process. -
New DVR Issues (First Run, Channel Switching, etc.)
I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half. -
Pension issue Mid Month Leaving
Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010 0.00 6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
AshwaniDear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis 01/2010 0.00 8,750.00
/139 VPF Basis 01/2010 0.00 8,750.00
/3F1 Ee PF contribution 01/2010 0.00 1,050.00
/3F3 Er PF contribution 01/2010 0.00 509.00
/3F5 Ee Mon PF contribution 01/2010 0.00 1,050.00
/3F6 Ee Ann PF contribution 01/2010 0.00 12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010 0.00 96.25
/3FA PF basis for Ee contri 01/2010 0.00 8,750.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3F4 Er Pension contributio 01/2010 0.00 541.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3R3 Metro HRA Basis Amount 01/2010 0.00 8,750.00
1BAS Basic Salary 01/2010 0.00 8,750.00
RT table for year 2009. DOL 27.10.2009
/111 EPF Basis 07/2009 0.00 9,016.13
/139 VPF Basis 07/2009 0.00 9,016.13
/3F1 Ee PF contribution 07/2009 0.00 1,082.00
/3F3 Er PF contribution 07/2009 0.00 628.00
/3F5 Ee Mon PF contribution 07/2009 0.00 1,082.00
/3F6 Ee Ann PF contribution 07/2009 0.00 8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009 0.00 99.18
/3FA PF basis for Ee contri 07/2009 0.00 9,016.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FC Pension Basis for Er c 07/2009 0.00 5,452.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3R4 Non-metro HRA Basis Am 07/2009 0.00 9,016.13
1BAS Basic Salary 07/2009 0.00 9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani -
Open PO Analysis - BW report issue
Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM DOC_ITEM DOCTYPE COMP_DEL
650000001 10 UB X
650000001 20 UB X
650000001 30 UB
650000001 40 UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampathHi Priya and Reddy
Thanks for your response.
Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No. Doc.No. Item Processkey Rocancel Elikz
41 6500000001 30 11 X ---
42 6500000001 30 11 --- X
43 6500000001 30 10 X ---
44 6500000001 30 10 --- ---
(Here --- means blank)
Thanks and Regards
sampath
Maybe you are looking for
-
How do I transfer everything from iPhone 3GS to my new iPhone 4S?
I purchased an iPhone 4S to replace my iPhone 3GS (which I will keep for spare, other chores). What I assumed I could do (and it seems I accomplished when I had upgraded from a 3G to 3GS) was that there was a way to restore my 3GS backup to the iPho
-
Dear Expert, Currently i am facing a strange issue regarding email notification and I am not sure where was the problem stuck even I have raised a message to SAP but till no any success. In our case we are getting a notification and approval mail in
-
I want to print report name at runtime but I cant find. I use form name on forms by get_application_property('current_form') but i cant find for report. Can anyone Help MAQ
-
Oracle Development Suite ( Form Builder + Report Builer ) vs Toad
Hi guys I a beginner in oracle world and I would like to ask >>> 1- What is the difference between toad and Oracle development suite and which one is better? 2- Could toad be used to create .fmb files ? What is the extension format of toad forms if t
-
I was wondering about layers. I'mworking on a website for a friend and the main layout is a table that is centred. I'd like to add some layers to it to do a custom dropdown menu with a transparent layer and the show-hide behaviour. But layers seem to