PowerPC and Intel based USB Drive

Is it possible to have a startup disk for both PowerPC and intel based Macs on the same USB disk?

A PowerPC can't boot from USB drives. It can be done with a FireWire drive. Partition with the Apple Partition Scheme, install PPC Tiger on one partition. Cone Tiger from an Intel Mac onto the other partition. Either Mac can boot from a disk with the Apple Partition scheme, but the Intel Macs cannot install or update it.

Similar Messages

Possible to use both PowerPC and Intel-based systems together with Qmaster?

Hello,
New to the Qmaster setup, I was wondering if it was possible to set up a Qmaster cluster mixing PowerPC and Intel-based systems. If it is possible, what version of Qmaster would support this type of cluster?

While it can work, note that if there is huge difference is processing speed, the PPC machine can actually slow down the process as everything waits for it to finish it's instance and copy it back.
It's worth a try but keep an eye on how the various computers perform.
Have fun.
x

Is there a partition scheme for both powerpc and intel-based macs?

I need to partition a drive to back up using time machine from two different Macs: one is powerpc and one is intel but disk utility seems to only allow you to choose on or the other.
this is the disk utility option:
Select a new partition scheme:
* Use Apple Partition Map partition scheme if the disk will be used with Time Machine and a PowerPC-based Mac.
* Use GUID partition scheme if the disk will be used with Time Machine and a Intel-based Mac.

silvrmn wrote:
unfortunately i am alternating them between computers.
is there a way to make it work or is the only solution to get two different drives and format them accordingly?
TM will most likely work fine with both computers if you partition the drive GUID. that's been the experience of most people who do it. but apple does recommend partitioning the TM drive GUID for backing up intel macs and APM for PPC ones.
using GUID is unlikely to create problems but it may.
but if you want safety on this you'll need two separate drives.

Apple Releases Security Update 2006-004 (PowerPC and Intel)

From Macfixit................
Apple has released Security Update 2006-004 for Mac OS X in both PowerPC and Intel versions. This update requires Mac OS X 10.4.7 for either PowerPC or Intel, Mac OS X 10.3.9 or Mac OS X 10.3.9 Server.
This is the fourth major standalone security update for Mac OS X released this year.
Update procedure recommendation First, avoid performing any other operations (in Mac OS X or third-party applications) while the update process is occurring. In addition, before installing this security update, make sure all Apple-installed applications and utilities are in their original locations. Moving one of these applications to a different location on your hard drive can lead to an incomplete update. Also, disconnect any FireWire/USB devices before applying the update (except for your startup drive, if it is FireWire or USB, and your keyboard/mouse), then re-connect the devices one by one (checking for issues created by any particular device) after the update process is complete and the system has restarted.
Enhancements in this release
Of most interest to general end-users:
a fix that prevents maliciously crafted Zip archives from causing condition where arbitrary code can be execute. In other words, prior to Security Update 2006-004 you could download a specially crafted file ending in .zip from a Web site or other location, and it could trigger the execution of malicious code.
a fix that disallows maliciously crafted Canon RAW images from creating a buffer overflow, potentially leading to arbitrary code execution. Prior to Security Update 2006-004, you could download or otherwise receive a Canon RAW file that could allow execution of malicious code on your system.
similar to the above, a fix that prevents maliciously crafted GIF images from causing an integer overflow, potentially leading to arbitrary code execution.
new download validation that will catch certain HTML files defined by Safari as "safe" that may actually contain malicious JavaScript code. After applying Security Update 2006-004, these files will not be automatically opened.
Protection against maliciously crafted HTML documents that can also open the door for arbitrary code execution by accessing deallocated objects.
A full list of enhancements is as follows:
AFP Server
An issue in the AFP server allows search results to include files and folders for which the user performing the search has no access. This may lead to information disclosure if the names themselves are sensitive information. If the permissions of the items allow it, the contents may also be accessible. This update addresses the issue in Mac OS X v10.3.9 by ensuring that search results only include items for which the user is authorized. For Mac OS X v10.4 systems, the issue was addressed in Mac OS X v10.4.7. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9:
The AFP server contains an integer overflow that can be triggered by an authenticated user. A malicious user with access to the AFP server may be able to cause a denial of service attack or arbitrary code execution with system privileges. The AFP server is not enabled by default on Mac OS X. This update addresses the issue by performing additional validation. Credit to Dino Dai Zovi of Matasano Security for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
On Mac OS X Server, the AFP server supports reconnection of file sharing sessions after a network outage. The storage of reconnect keys is world-readable. It may be possible for an authenticated local user to read the reconnect keys, use them to impersonate another user over AFP, and access files or folders with the privileges of the impersonated user. This update addresses the issue by protecting the reconnect keys with appropriate file system permissions. This issue only affects Mac OS X Server. Available for: Mac OS X Server v10.3.9, Mac OS X Server v10.4.7.
An unchecked error condition exists in the AFP server that may lead to a crash. By carefully crafting an invalid AFP request, an attacker may be able to trigger this condition and cause a denial of service. This update addresses the issue by handling the formerly unchecked error condition. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7
Bluetooth
The security of the Bluetooth Setup Assistant has been improved in this update for Mac OS X v10.4.7. The length of the automatically generated passkey used for pairing has been increased from six characters to eight characters. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
Bom
An issue in Bom's compression state handling may cause heap corruption. By carefully crafting a corrupt Zip archive and persuading a victim to open it, an attacker may be able to trigger this condition which could lead to an application crash or arbitrary code execution. Note that Safari will automatically open archives when "Open `safe' files after downloading" is enabled. This update addresses the issue by properly handling such malformed Zip archives. Credit to Tom Ferris of Security-Protocols.com for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
DHCP
A stack buffer overflow exists in bootpd's request processing. By carefully crafting a malicious BOOTP request, a remote attacker may be able to trigger the overflow and cause arbitrary code execution with the privileges of the system. Note that bootpd is not enabled by default in Mac OS X, and must be manually configured in order to be enabled. This update addresses the issue by performing additional bounds checking. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
dyld
Malicious local system users may specify dynamic linker options that cause output to standard error. This output contains informational content and potentially user-specified content. As a result, privileged applications that parse or reuse standard error may be influenced inappropriately. This update addresses the issue by ignoring the problematic dynamic linker options in privileged applications. Credit to Neil Archibald of Suresec LTD for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
An improperly handled condition in the dynamic linker may lead to including dangerous paths when searching for libraries to load into privileged applications. As a result, malicious local users may cause the dynamic linker to load and execute arbitrary code with elevated privileges. This update addresses the issue by properly selecting search paths when executing privileged applications. Credit to Neil Archibald of Suresec LTD for reporting this issue. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
fetchmail
Several issues in the fetchmail utility were discovered. The most serious issue could lead to arbitrary code execution when fetching mail from a malicious POP3 mail server. All issues are described at the fetchmail website (fetchmail.berlios.de). This update addresses the issues by updating fetchmail to version 6.3.4. In addition, fetchmail is no longer distributed as a privileged utility. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
gunzip
A race condition may allow a malicious local user to modify the permissions of files owned by another user executing gunzip. This issue is only exploitable when executing gunzip on files in directories that are modifiable by other users. This update addresses the issue by properly handling files while decompressing. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
A directory traversal vulnerability is present in the command line utility gunzip when it is used with the non-default "-N" option. By carefully crafting a malicious compressed file and persuading a user to open it with "gunzip -N", an attacker may replace or create arbitrary files with the privileges of the victim. This update addresses the issue by properly stripping paths from files when decompressing. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7
Image RAW
By carefully crafting a corrupt Canon RAW image, an attacker can trigger a buffer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of Canon RAW images. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7.
ImageIO
By carefully crafting a corrupt Radiance image, an attacker can trigger an integer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of Radiance images. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
By carefully crafting a corrupt GIF image, an attacker can trigger an undetected memory allocation failure which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of GIF images. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7.
By carefully crafting a corrupt GIF image, an attacker can trigger an integer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of GIF images. This issue does not affect systems prior to Mac OS X v10.4. Credit to Tom Ferris of Security-Protocols.com for reporting this issue. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
LaunchServices
Download Validation may erroneously identify certain files containing HTML as "safe". If such a file is downloaded in Safari and Safari's "Open `safe' files after downloading" option is enabled, the HTML document will automatically be opened from a local URI. This would allow any JavaScript code embedded in the document to bypass access restrictions normally imposed on remote content. This update provides additional checks to identify potentially malicious file types so that they are not automatically opened. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
OpenSSH
Attempting to log in to an OpenSSH server ("Remote Login") using a nonexistent account causes the authentication process to hang. An attacker can exploit this behavior to detect the existence of a particular account. A large number of such attempts may lead to a denial of service. This update addresses the issue by properly handling attempted logins by nonexistent users. This issue does not affect systems prior to Mac OS X v10.4. Credit to Rob Middleton of the Centenary Institute (Sydney, Australia) for reporting this issue. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
telnet
When connected to a TELNET server, the client may send the contents of arbitrary environment variables to the server if the server requests them. Some environment variables may contain sensitive information that should not be sent over the network. This update addresses the issue by ensuring that only non-sensitive variables and variables that the user has explicitly requested are are shared with the server. Credit to Gael Delalleau and iDEFENSE for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
WebKit
A maliciously-crafted HTML document could cause a previously deallocated object to be accessed. This may lead to an application crash or arbitrary code execution. This update addresses the issue by properly handling such documents. Credit to Jesse Ruderman of Mozilla Corporation for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7
AppKit, ImageIO
Buffer overflows were discovered in TIFF tag handling (CVE-2006-3459, CVE-2006-3465), the TIFF PixarLog decoder (CVE-2006-3461), and the TIFF NeXT RLE decoder (CVE-2006-3462). By carefully crafting a corrupt TIFF image, an attacker can trigger a buffer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of TIFF images. Systems prior to Mac OS X v10.4 are affected only by the TIFF NeXT RLE decoder issue (CVE-2006-3462). Credit to Tavis Ormandy, Google Security Team for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7./

Right after installing Security Update 2006-004 (Intel) on my macbook pro I am having troubles with my wireless connectivity. Here is the dump from the console:
Aug 3 15:49:43 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: WirelessAssociate2() = 88001006 for network RadioActive
Aug 3 15:49:43 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: (had password)
Aug 3 15:49:51 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: WirelessAssociate2() = 88001006 for network RadioActive
Aug 3 15:49:51 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: (had password)
Aug 3 15:49:59 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: WirelessAssociate2() = 88001006 for network RadioActive
Aug 3 15:49:59 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: (had password)
I can reboot and it will work, but if I put my macbook to sleep it, when I wake it, it will do the same thing again.
I am also getting timeouts waiting for results of 1st wireless scan to complete in console.
Anyone else having this issue?
MBP15-2GHZ Mac OS X (10.4.7)

Can i put a intel based hard drive in my ibook g4?

Im wondering if its possible to install a intel based hard drive in my ibookg4,and am wondering if it would be more reasonable to do that instead of buying a completely new computer.Any websites you could show me,or info you could give me would help me a lot.Thank you

There really aren't "Intel based" hard drives.
However, what your iBook needs is a 2.5" PATA hard drive. If you're looking to use a hard drive from, say, a MacBook, that won't work because MacBook hard drives 2.5" SATA drives. What was your plan, exactly?
You can check iFixit.com for instructions to replace the drive--it will take a few hours, and there's a LOT of screws involved, but the project is certainly doable.
Take a search through the boards for other similar topics & you'll find some good advice.
~Lyssa

Iphone display stuck with the itunes icon and picture of usb drive

My iphone display is stuck with the itunes icon and picture of usb drive. I've tried resetting the phone but it comes back each time. When connected to PC nothing happens. When I open itunes the phone is not recognized.

see if this link helps http://support.apple.com/kb/HT1808

FCP X does not recognize projects and events on USB drive after a time machine restore of the MBP macintosh disk

FCP X does not recognize projects and events on USB drive after a time machine restore of the MBP macintosh disk.
I upgraded from an i5 to an i7 15" MBP and restored my files using my time machine backup. All seemed to go ok, except I had to use the migration assistant because on the initial boot the MAC didn't recognize the backup database on the USB device. MAybe this is a hint.
Since when I start FCPX it too cannot finnd the project or event directories.
Before my upgrade, I had a choice of files either on the Macintosh disk or the 2TB USB disk.
Now only files on the Macintosh are accessible to FCPX. The USB drive is visible under events and project but it finds no projects or events.
Please help if you can.
Thanks
Barry

Thanks... alas no one has responded.
I think I have the structure that you are recommending.
I have a root level directory (Final Cut Events) with the files in them.
The puzzling thing is that it used to work before the migration!.
Anyway I'm going to move the contents to the root and see what happens.
On a slightly different note...
I also posted a question about CPU utilization. Can I ask a question or two?
While rendering a short clip, I noticed burst of disk activity when the render started (likely loading the media files into ram since I have about 4Gigs available, then almost no activity while the render is happening, then more disk activity when its done.
However the cpu activity is not as high as I would have expected since rendering requires a lot of cpu.
What is your experience? I know some render is done by the GPU, but in my older i5 the CPU was about 100%, now in my i7 its about 50%.
Please look at the attached utilization for CPU and disk activity.
Thanks for any thoughts... Barry

Problems with RAID and a Flash USB Drive

I'm attempting to install on a RAID 1 array using just one usb flash drive. Yes, just one. I'm trying out the idea's in this thread: http://bbs.archlinux.org/viewtopic.php?id=64281
Partitioning scheme:
sdb1 -> boot partition
sdb2 -> swap
sdb3 -> raid 1 array -> root
I set the partitiions to type 0xfd (linux raid autodetect) in fdisk (probably not necessary) and created the array with:
mdadm -C /dev/md0 -n 2 -l -b internal missing -W --write-behind /dev/sdb3
I then installed like normal, specifying that I needed usb and raid hooks in mkinitcpio.conf
I added "md=0,/dev/sdb3" as a kernel option in grub's menu.lst, specifying that the md driver should assemble /dev/md0 (my root partition) out of /dev/sdb3 before trying to mount it.
This process was succesful using a partition on my hard drive.
However, using a usb drive causes a kernel panic during boot when trying to mount /dev/md0.
Looking at the messages reveals that before my usb drive was detected, md attempted to create the array, unsuccessfully, as /dev/sdb didn't exist yet. "md: unkown device name /dev/sdb3" or something to that effect.
In mkinitcpio.conf, the usb hook comes before the raid hook, so this shouldn't be happening, should it?

I think rootdelay will not work in that special case, rootdelay makes the system to wait after all the hooks are executed, and you need to wait before executing the raid hook.
I don't know if there is an easy way for that, but one solution is to modify the raid hook to wait for /dev/sdb3 to be created :
- edit /lib/initcpio/hooks/raid, add this before the /bin/mdassemble command :
until [ -e /dev/sdb3 ] ;
do
sleep 1 ;
done
- rebuild your boot images with mkinitcpio (you'll need to chroot to your system)
that should work
PS: someone correct me if I'm wrong, but from what I know, the usb hook does not create your /dev/sdb (if you edit the usb hook, you'll see that it only set rootdelay if it is not yet set). it is the udev daemon, which is launched in the background by the udev hook, and the udev daemon is quite long to create USB device nodes.

Windows 8 and iPhone 5 USB Driver

I upgraded my iPhone to version 5 and Windows 8 does not recognize the device. Any ideas how to fix this? I was able to connect my iPhone 4 successfully before on Windows 8. Any ideas what driver I need to download to get my iPhone 5 working on Windows 8. When I do a search automatically for drivers, it returns nothing.

carlamich:
Step 1: Install the latest version of iTunes on Windows 8 (using compatibility mode). Windows 8 gives you that option for compatibility mode:
Right click itunes installer.
Cick run in compatibility mode windows 7. If it has no issues, itunes will be installed for windows 8 or it will fail.
(reboot your machine)
Step 2: Stopped all apple services
Open a command prompt and type:
net stop "Apple Mobile Device"
net stop "Bonjour Service"
net stop "iPod Service" (find all Apple services or just use the GUI Services under control panel)
Step 3: Unstalled the unknown USB driver
For this, you need to go to Device Manager and uninstall unknown USB drivers.
Don't be scared, if Windows does not understand that driver, free up the space for a driver that actually works when you plug in your cable:
(please tell me you know how to get to device drivers)
Step 4: Start up all services and fire up iTunes 11 without my phone plugged in. (nothing plugged in / bare startup mode)
net start "Apple Mobile Device"
net start "Bonjour Service"
net start "iPod Service" (find all Apple services or just use the GUI Services under control panel)
Step 5: Plug your iPhone5 and let the USB manager do its thing and iTunes immediately will recognized it.
Step 6: Give me some credit becuase I typed all this stuff for you?

Internet Sharing for PPC and Intel based Macs

I have OSX 10.4 Server running with NAT and DHCP enabled. The internet is accessed through a wired connection, and 2 Powerbooks(PPC based) and an Intel iMac and MacBook connected to the server via Airport. The wireless signal is WEP protected, and the Intel based Macs can connect to the wireless network, recieve a good IP address and access the internet. These two connected computers can be seen on the Server Admin DHCP Clients tab.
My problem is with the PPC based Mac, the 2 PowerBooks. Those computers can connect to the wirless network, but they get an invalid IP address. Not only is the IP invalid, so is the Subnet Mask.
All computers are running 10.4.7, and all installed from the Combo Updater.
Any suggestions?

We're having the same problem here!
Rarely we manage to get the right IP address assigned to one PPC machine by playing with various network settings but we didn't found a reliable way to get the PPC machines always working.
This is really strange... any suggestion is appreciated.

Flashhelp, Safari and Intel-based Macs

I'm having problems with my Flashhelp project properly
displaying on Intel-based Macintoshes in Safari. The project
displays all of the flash-based UI elements, but doesn't display
the topic matter itself. The exact same projects work fine with
Firefox. As far as I can tell, this is localized to Safari only on
Intel macs. Has anyone else run into this problem?
A couple of notes:
1. version 9,0,47,0 of the Flash Player plugin
2. version 2.0.4 of Safari
3. I don't believe that this is related to the stubborn Flash
security issues that have plagued Flashhelp projects, since we
automatically generate a FlashPlayerTrust cfg file for our help
system when it's installed (so that we're added to the Trusted
List, and the end user doesn't need to updated their Flash security
settings to view our help).
Any ideas?

Yeah, I completely understand. It's the Intel Mac / Safari
combination is our fastest growing group of users. I also have
access to a copy of Flare 3, and am exploring converting the files
over to Flare Projects and building them as Webhelp. Unfortunately,
that means that we'll be losing all of the work that we put into
our custom Flashhelp skin. Yet with all of the Flash security
issues that we've suffered through, maybe I won't miss it that
much.

Obscure Nano and Mini XP USB Driver Problem Finally Solved

I had a rather obscure USB driver registry problem that few others would probably have, but this might be helpful.
I was unable to get Windows XP SP2 Media Center Edition to properly recognize either my iPod Mini or Nano 3rd generation. The iPods would be seen by XP in Device Manager (would show Apple iPod USB Driver) when connected, but would immediately disconnect. The Apple iPod USB Driver properties would then show “This device cannot start (Code 10).”
I first tried all the Apple-recommended fixes: the five Rs; reinstalling the Apple iPod USB driver; disconnecting all other USB devices; switching USB plug-in points; putting the iPod into Drive Mode; and all the other things shown in the troubleshooting guide “iPod shows up in Windows but not in iTunes,” http://docs.info.apple.com/article.html?artnum=93716
None of the above worked. And on occasion after uninstalling and reinstalling the iPod USB driver, I would get a blue screen with the error message “driverirql_not_less_orequal,” sometimes followed by stop codes and something called “USBPORT.SYS.”
Apple phone support was unable to help, claiming that XP Media Center Edition was not supported, though the problem appeared to have no relation to MCE versus Home or Pro.
Then I finally stumbled onto the solution. I previously had installed a USB drive encryption program (NTINinja) on my computer. Although I had uninstalled the program months earlier, it had left a registry entry which was interfering with the iPods. When I deleted the registry entry, the problem was solved.
Those of you having similar recognition problems as described above might check Control Panel, System, Hardware, Device Manager, Universal Serial Bus Controllers, USB Root Hub, Properties, Details, then select Class Lower Filters in the drop-down box. If there is an entry, that might be the problem.
To get rid of the entry, first write down what it is. Then go to Start, Run, Regedit. Backup the registry (File, Export). Then go to Edit, Find, and type in the suspect entry. It should find the registry key containing the entry in HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\.
Right click on the LowerFilters key and select Modify. Then delete the suspect entry. Close the registry editor. You might have to reboot – can’t remember.
I can’t guarantee the above is completely accurate, but it may help someone.

OK now! Dag, I was going crazy. I had two brand new Raptors and was trying to hook them up in a RAID 0 config. I am no dummy. It would hang at detecting arrays. I could not figure it out for the life of me. I will not talk about all of the combos that I tried. My buddy told me to try datalifeguard from WD. I did. Well, one HD showed no serial number in the extended test. An error message popped up. Said the drive was not working. So, Newegg sends me a dead drive and wastes days and days out of my life. I hooked up the one good drive just now. What do I see? For the first time in my life, I am seeing the raid bios! This almost cost me a divorce. Seriously though, the wife would come in and rub my shoulders like a fighter after a few hours of getting my azz whipped by this new rig. I am now going to make the floppy with the newer drivers like was done here. Just incase. I am in Raid bios now in the other room. Time to go set up XP on one drive for now. I refuse to wait for the RMA'ed second Raptor.

Apple and Intel Shun USB-3

Intel and Apple are working together to bring "Light Peak" to the world of computing. Neither are adopting USB-3 at this point because they believe Light Peak will be far better. It's due to premier first part of next year on a Macintosh near you. Of course the name will be changed to "iPeak" or something like that.
RealDave

Yes, it will be interesting to see how they implement this new technology. Nobody really knows except
for Apple and Intel and the various manufacturers involved, Foxconn among others. The data lines are
Fiber using infrared transmission and the cable will probably also incorporate copper wires to power the many different devices. 100 meter lengths will be possible @ 10Gbps. and eventually up to 100 Gbps.
Very interesting. They are looking to replace all current specs. SCSI, Firewire, HDMI, Ethernet, USB, with
this one spec. Quite an accomplishment if it actually happens. Time will tell.
RealDave

Is RAM interchangeable betweem PowerPC and Intel machines?

I have a MacBook with a 2 GHz Intel Core Duo processor, and 1GB 667 MHz DDR2 SDRAM (2x512) and I'd like to upgrade the RAM. I'll probably go with either an extra 2GB (thus total 2.5), or with two 1GB (2x1GB). The discussion forum has been helpful in how to go about that. I have another question:
I have an iMac G5 (PowerPC) and PowerBook G4 that could use more RAM as well. Would it be possible to put the RAM from my MacBook into either of these?

Hi,
sorry to say, but No.
Intel-Macs (apart from the Mac Pro) use 200-pin RAM modules, whereas the iMac G5 uses 240-pin modules.
The Powerbook G4 use 200-pin modules but according to Apple they have to be PC2-4200 DDR2 compliant while the MacBook modules are PC2-5300 DDR2.
It might be worth to try if the MacBook modules do work in the PowerBook, but no guarantee for this.
Regards
Stefan

AMD Radeon 6770m and Intel HD 3000 Driver for Windows 8.1 Pro 64 Bit

Hi, I use
Laptop : HP Pavilion DV 6 - 6019 TX.
OS : Windows 8.1 Pro 64 Bit.
VGA : - AMD Radeon 6770m
- Intel HD 3000
Now, the graphic was error, each after booting, the windows logo appears then to black screen (can't get the desktop).
In device manager - display adapters, only AMD problem (Microsoft Basic Display Adapter), then I uninstall the driver to be able to install AMD drivers.
I tried with "14-4-mobility-win7-Win8-win8.1-64-dd-ccc-WHQL", it is said that the last AMD drivers, but when at the end of install, it said failed to complete.
i also update driver Intel HD 3000 from this " https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 "
File name: win64_152822.exe
Version: 15.28.22.64.3517 (Latest)
Date: 04/10/2014
Size: 138.68 MB
OS: Windows 7 (64-bit), Win 8 (64-bit), Win 8.1 (64-bit)
anyone please help me? i already try 5 days to try some driver but still black screen because AMD driver can't install. if you know the driver, please write the link. thanks a lot

1. In bios, do you found fixed and dynamic? if you don't found, install bios mod. Use dynamic
2. Uninstall all programs and drivers previously, before of "Advanced Micro Devices, Inc. - Graphic Adapter WDDM1.3 - AMD Radeon HD 6700M Series" Release July 2014. You can use http://www.wagnardmobile.com/DDU, for example.
3. Do you install windows 8.1 on windows 8.0? do you use windows 8.1 fresh installation? Can you testing install a new copy of windows 8.0 fresh? install drivers and later install updates... or fresh install windows 8.1?
4. You testing install Windows 7 with http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55092.exe and update to windows 8?
5. You testing install http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55092.exe in windows 8 initially?
NOTE: Excuse me my bad english, I try to help you. You should install drivers in order: Intel Chipset Device Software, Intel Rapid Storage Technology, Intel Management Engine Interface (6-series / 7-series / 8-series / 9-series) and then AMD software: http://forum.notebookreview.com/hp-drivers-software-forum/556469-drivers-hp-dv6-4xxx-dv6-6xxx-dv7-5x...
NOTE 2: My computer support Windows 8.1 native, but your computer not... http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5077... will be no new official drivers for these devices
NOTE 3. Test leshcat or guru3d drivers, and review forum respectively

PowerPC and Intel based USB Drive

Similar Messages

Maybe you are looking for