PowerPC build for Linux?

Is there any plan for a PowerPC (PPC) build of Flash Player
for Linux? I would like Flash Player to work on my iBook which runs
Linux...

> Answer it and I will go away...
I did answer it .. it will be available when its ready.
If it isn't out there, then people here won't know. This is a
forum for
MM/Adobe clients, its not a direct line to god (I mean, the
MM developers).
if you're VERY lucky someone from MM will read it .. but
whether or not they
are allowed to answer it (even if they cane) with something
definite is
unlikely.
Asking over and over won't make it happen any quicker. It
will just
encourage other people to ignore your posts.
Jeckyl

Similar Messages

Flex Builder for Linux will need his companion Thermo

I’ve been developing in Flex for a long time now. My
main work is in the design area although I do a lot of coding. The
Flex Builder Linux testing is being quite difficult, since the
layout design view is not enabled yet. So we need a lot of
imagination and a little bit of experience in AS3 and MXML tag
codding.
As a designer (and developer  ) I would like to ask
for a Thermo for Linux. It’s just a request, but I think
there are a lot of guys that share my opinion.
Thanks,

Hi, thanks for your answer.
It turned out the problem was related to the *standalone* flashplayer.
This is located in linux in:
FLEX_BUILDER_INSTALL_PREFIX/Player/linux
when I was clicking on the "Run" button Flex Builder was looking for a flashplayer standalone app, and was failing to find it.
What I had to do was to add the complete the flashplayer path to the PATH used by eclipse.
Now clicking on "Run" it compiles the application and launches the standalone player with the generated swf file.
Now I wonder if there is some way to select the flashplayer to launch, and if it is possible to configure eclipse to make it launch a browser or a custom script rather than execute that swf with the standalone player.
Thanks, regards.

Suggestions for Flex Builder for Linux

I'm new to Flex, and I have to say that I'm enjoying it quite
a lot. I think the thing that really helps speed up development is
good tools. Flex Builder 3 for Linux makes a good start at
providing a very nice development tool, but there are a couple of
things I'd like to see different with this tool.
First off, please give me an update site to use to install
Flex Builder. I use Red Hat Developer Studio (soon to be JBoss
Developer Studio, Eclipse 3.2 based), and I can't get FB 3 Alpha
for Linux to install into it. I have been successful with base
Eclipse Europa and FB 3, but I'd like to have my IDE tools in one
frame. An update site would let me add FB 3 into any Eclipse flavor
I choose, as long as it supported the appropriate components.
Next, Design mode for FB 3 is a must. I am very functional
with the content assist features in the source editor (and they are
_quite_ good, I must say), but design view really helps me preview
changes quickly and rapidly test out UI designs. Much faster than
writing and launching over and over.
Otherwise, great work, and please get out a new release
soon!

cdelashm wrote:
> I'm new to Flex, and I have to say that I'm enjoying it
quite a lot. I think
> the thing that really helps speed up development is good
tools. Flex Builder 3
> for Linux makes a good start at providing a very nice
development tool, but
> there are a couple of things I'd like to see different
with this tool.
>
> First off, please give me an update site to use to
install Flex Builder. I
> use Red Hat Developer Studio (soon to be JBoss Developer
Studio, Eclipse 3.2
> based), and I can't get FB 3 Alpha for Linux to install
into it. I have been
> successful with base Eclipse Europa and FB 3, but I'd
like to have my IDE tools
> in one frame. An update site would let me add FB 3 into
any Eclipse flavor I
> choose, as long as it supported the appropriate
components.
>
> Next, Design mode for FB 3 is a must. I am very
functional with the content
> assist features in the source editor (and they are
_quite_ good, I must say),
> but design view really helps me preview changes quickly
and rapidly test out UI
> designs. Much faster than writing and launching over and
over.
>
> Otherwise, great work, and please get out a new release
soon!
>
>
Thank you for your valuable feedback. Can you please take 2
minutes to
log an Enhancement Bug in the bug base so we can track your
request and
work on it as we proceed.
http://bugs.adobe.com/jira
(Choose Flex Builder Linux Project)
Thanks
Arun

Flash Builder 4 (Linux)

Is there a planned Linux version of Flash Builder? I've been using the FB3 alpha release for a long time now, and I'm hoping that FB4 will be released for Linux. I'm sure there are many out there who are more than willing to pay for it.
Flash Builder for Linux would be one more step toward making it possible to easily develop Flash Platform applications on any operating system. I know it's possible to do this via the Flex SDK, but IDE support speeds development time by a LOT.

hi,don't waiting....
this is a port version for linux:
a project to port the Adobe Flash Builder to Linux
Hmmmm, and how exactly do you 'port' commercial software, Flex SDK is open source so sure you could develop a gumbo ide for the sdk but all those features beyond the sdk that actually are what Flashbuilder is about come out of Adobe you can't have a (one-long-dhonge) version of Flashbuilder with Adobe trade marks your post shouldn't even be here in the forums.
David.

Compiling a LabVIEW application for Linux

Hi
I have developed my labVIEW application in windows XP using LabVIEW 7.1
Can anybody tell more what I need to do and what tools I need to complie my application for Linux. Do I just need an application builder for Linux?
Hope somebody can help.
Many thanks
Ash

hello ash,
you need labVIEW and the application builder both for linux in order to create an application for a linux target.
regards,
robert h
NI germany

Suggestion for Linux Compilers Alpha Build 18 Readme

The Alpha Build 18 Readme at
<http://developers.sun.com/prodtech/cc/documentation/linux_ea/readme.html>
does not make it clear how one should file bug reports against the
build. Perhaps you could add a statement saying, "to file a bug
report, start a new topic on the Sun Studio C forum", assuming that
this is actually what you want people to do.

Paul,
"Compilers and Tools on Linux" page specifically says that " these early builds available is strictly for evaluation and to gather feedback thru the Sun Studio for Linux forum".
We are trying to address all the problems reported on forums, however forums are not intended to be used as a primary framework for filing bugs.
We are working on providing a convenient way to report bugs not just through a support contract channel (which will be still available for you if you have one). Thats still in progress AFAIK.
regards,
__Fedor.

Oracle 11 for Linux PowerPC

Hi,
someone can tell me if there is a release of Oracle Server 11 for Linux PowerPC?
Currently, the latest supported version of Oracle for Linux PowerPC is the Oracle 10g R2.
Maybe Oracle has dropped the developments for Linux PowerPC?
Eny.

Hi;
10.2.0.5 is certified wiht PowerPc, for r11 there is Sched TBA(11.2.0.2)
Please see below oracle doc:
Release Schedule of Current Database Releases [ID 742060.1]
Regard
Helios

[SOLVED] Build nvidia-173xx (173.14.31-7) for linux-ck-kx (3.4.1-2)

I need a bit of help here. For a few months I have been using the proprietary nvidia-173xx driver for my old NV34 / GeForce FX 5200 (I have a downgraded xorg-1.10 and a compatible nvidia-173xx-utils (173.14.31-1)).
I have four kernels, and I used to be able to build the nvidia-173xx module without problems for all four kernels.
However, after the recent upgrade from linux-ck-kx-3.3 to linux-ck-kx-3.4 I can no longer build the nvidia-173xx for this kernel (but it still builds fine for the three other kernels on my system).
Here is the error I receive:
$ makepkg -sfci
==> Making package: nvidia-173xx-ck-kx 173.14.31-7 (Wed Jun 6 10:46:18 EDT 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Found NVIDIA-Linux-x86_64-173.14.31-pkg0.run
-> Found generated.patch
==> Validating source files with md5sums...
NVIDIA-Linux-x86_64-173.14.31-pkg0.run ... Passed
generated.patch ... Passed
==> Extracting Sources...
==> Starting build()...
Creating directory NVIDIA-Linux-x86_64-173.14.31-pkg0
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 173.14.31....................................................................................................................................
patching file conftest.sh
Makefile:339: /lib/modules/3.4.1-2-ck/build//Rules.make: No such file or directory
make[1]: *** No rule to make target `/lib/modules/3.4.1-2-ck/build//Rules.make'. Stop.
make: *** [module] Error 2
==> ERROR: A failure occurred in build().
Aborting...
I don’t know what to make of this error ; I’ve looked in `/lib/modules/<kernel-versions…>…' but I don’t see any file named `Rules.make' in there…
Here are the files I use for building the modules (they are all slightly customized PKGBUILDs based on AUR/nvidia-173xx) :
core/linux               --> PKGBUILD  --> nvidia.install
core/linux-lts           --> PKGBUILD  --> nvidia.install
AUR/linux-lts-ck       --> PKGBUILD  --> nvidia.install
repo-ck/linux-ck-kx  --> PKGBUILD  --> nvidia.install
In this list, #1-3 still build without a hitch, only #4 throws the error I pasted above. Ideas? Thanks in advance!
Last edited by Montague (2012-06-07 21:53:12)

Well nevermind, I don’t know what I was doing wrong before, but with yesterday’s update of nvidia-173xx (patch not longer required) and nvidia-173xx-utils in the AUR, I was able to upgrade to X.org-1.12, and I re-built the nvidia module for all my kernels. I now have a fully current arch system, yay !
In case this is useful to anyone, here are the slightly modified PKGBUILD and nvidia.install that I used (based on natrio’s package in the AUR)

Report Builder on Linux?

Hi Everyone,
Is it possible to run a version of Oracle report builder in linux? Currently right now I am running Reports 6i in Windows XP. I've found a way to run all my other apps in linux and have switched over except for a couple of Oracle apps. The main ones being Reports and Workflow Builder.
I remember there was a way to run Forms builder in Solaris not sure if there was a same version like that for Reports builder.
Thanks.

hi ,
The oracle report builder will work on linux operating system also.

How to start Oracle Report Builder in Linux

Hi all
Can someone please help by telling how can i start Oracle Report Builder in Linux????
Thank you and best regards to all

Hello,
there should be a script rwbuilder.sh
in ORACLE_HOME/bin for 10.1.2.
in ORACLE_INSTANCE/config/reports/bin for 11g
Of course, you need to have a "X Display Server " up and running and the variable DISPLAY must be set to this "X Display Server "
Example :
export DISPLAY=123.456.789.12:0
$ORACLE_HOME/bin/rwbuilder.sh
Regards

How to create a c++ shared library (.so) for linux real time (for myRio) with Eclipse to use in LabView?

I tried already these Tutorials and Advices but I didn't find a solution:
- http://www.ni.com/tutorial/14625/en/
- http://www.ni.com/tutorial/14690/en/
- http://forums.ni.com/t5/LabVIEW/Shared-Library-on-myrio-Linux-Real-time-system/m-p/2842540/
- http://forums.ni.com/t5/LabVIEW/How-to-create-shared-library-for-linux-real-time-target-in/m-p/28218...
- and some more
I want use c++ codes on linux real time. For testing reasons I want to have a function that adds 2 values and gives the result.
I've done these steps:
1. writing a c++ file in Eclipse (see screensot 2)
2. building a shared library (.so) from my c++ project in Eclipse (with Cross GCC)
3. putting this file on myRio (path: /usr/local/lib/)
4. creating a VI that calls this library from Labview with a "Call Library Function Node" (see screenshot3)
5. Setting the properties for the "Call Library Function Node" (see screenshots 4-7)
After I run this VI i get this error message: LabVIEW: (Hex 0x627) The function name for the ... node cannot be found in the library. To correct this error, right-click the Call Library Function Node and select Configure from the shortcut menu. Then choose the correct function name. (see screenshot1)
I've tried a lot things to solve this problem but I couldn't find a solution. Would be very happy if anyone can help me. I guess that I have to edit my c++ code to export my function (symbol). But I have no idea how to make it. I also tried it with a dll file in the same folder but it didn't help.
Perhaps someone can send an example which works on myRIO.
Thanks!
screenshot1
screenshot2
screenshot3
screenshot4
screenshot5
screenshot6
screenshot7

can see it in the screenshot8 there is a function called "_Z8AddierenddPd" instead of "Addieren". I copied this name to Labview (see screenshot9) and it worked.
I'm sure that there is a way to compile the shared folder with gcc without decorations (mangling). But I don't know how. If someone has a recommendation I would be very glad!
Prepend each function declaration that you want to be available without name decoration with
extern "C" <your function declaration>
Or if you have multiple functions you want to export you can in the header file where you declare your functions simply use:
#ifdef __cplusplus
extern "C" {
#endif
<all your function declarations>
#ifdef __cplusplus
#endif
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

It is not possible to install LenovoEMC Storage Manager for Linux on Ubuntu 14.10

hi,
I have big problem installing LenovoEMC Storage Manager for Linux on Ubuntu 14.10 64bit.
I downloaded it from https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/26108
Installed JRE (both 64 and 32 bit)
Selection Path Priority Status
0 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 auto mode
* 1 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 manual mode
2 /usr/local/java/jre1.8.0_25/bin/java 1 manual mode
java -version
java version "1.8.0_25"
Java(TM) SE Runtime Environment (build 1.8.0_25-b17)
Java HotSpot(TM) 64-Bit Server VM (build 25.25-b02, mixed mode)
tryed with both. but without success.
I am still getting error:
./setup-1.4.4.14439.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
1- Deutsch
->2- English
3- Español
4- Français
5- Italiano
6- Nederlands
7- Português (Brasil)
8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Any help?
Thanks!
Solved!
Go to Solution.

Ok , i got this baby working.. sudo is not a problem here.. you need to specify additional java parameter for installer!
./setup-1.4.4.14439.bin LAX_VM /usr/bin/java

Why Apple does not offer support for linux?

We all know the history of Apple. It clearly shows a trend to be open source, excepting for the licenses they share with Microsoft. In my personal case, I love open source because it has solved several of my problems. Just to share this with everyone, I am the network manager of a educational institution and I used to have my servers running on windows platform. Since we used to buy it all from Microsoft, they would give us free software for or labs, software like Visual Studio. They even assigned us engineers to plan everything for our servers, free of cost. Guess what? It was a disaster. We had our database destroyed by an external attack. We were “lucky” to have Microsoft in our servers and in our firewalls.
We had to take action, so I decided to switch to Debian, and to use IPCOP (a great dedicated firewall, if there is anyone interested, the link is: http://ipcop.org/ , please note, I am NOT affiliated with them, and I will receive no compensation or benefit if you chose to access it or not ). Both open source. The result, no external attack has been able to pass trough. After that, we switched most* of our e-learning platforms to open source, and guess what? We are saving over 60,000 yearly just in software. So for those who are looking for a good way to get good security without loosing an eye, try open source.
Now back to the point, I do not fully support any operative system. They all have their good features, or at least they should. The ones I know, are because I use them. My home network is composed by computers running in five different versions of Linux, two running in Mac OS X Tiger, and some others running in XP pro. My main computer is running in Ubuntu, and is really sad to see that there is no software from apple available for Linux. That is honestly the worst part of Linux, having no iTunes or QuickTime available. No way to see multimedia in the web, etc. A suggestion for apple would be, give support for Linux, there are a lot of us wanting the same.

Apple makes software and hardware. Therefore they
offer a total solution. Now they even can have
windows xp running on their hardware. Making a
version of mac os to run on linix isn't practically.
Under a mac is unix and you can run unix software
with the mac so you could do ever thing you are
doing with a mac.
I did not know Linux was one type of computer, like Mac...
Next topic, If I was willing to pay for it, this thread would not exist, because I can actually use a commercial software to adapt the windows web plug ins to Linux... If I was in charge of Apple, I would propose to develop free software support of my products, - plug ins and so - to other operative systems... But of course, even if I did, it would not be up to me. It would have to pass trough several layers of bureaucracy, and it would take a lot of time to be approved or rejected.
Anyway, the main issue is, the three most important OS's are Windows, Linux, and Mac. And that can't be denied. Now you can even run Windows in a Mac PC, and vice versa... besides being fancy, what else could I do with a Mac PC using Windows, when I can build a machine able to run Windows for less than 300 bucks? OK if you want to try a Mac in a i386 or a x86... but I still rather to be the proud owner of a PowerMac G5 than the owner of a Pentium 4 / AMD using Mac OS.
Also, I thought it would be fun to see the reactions and opinions of other people with this topic, hence, I was not expecting anyone from Mac to read it, and really do something about it, because I know they won't.

OWB 9.2 (for linux) can be installed on ES3.0?

Hi,
I am having OWB 9.2 for Linux. I installed the same on Linux AS2.1
When I am trying to install it on ES3.0 (2.4.21-4.EL #1 Fri Oct 3 18:13:58 EDT 2003 i686 i686 i386 GNU/Linux), I am facing the below error
"Initializing Java Virtual Machine from ../../stage/Components/oracle.swd.jre/1.3.1.0.0/1/DataFiles/Expanded/jre/linux/bin/java. Please wait...
[oracle@bplinux55 Disk1]$ Error occurred during initialization of VM
Unable to load native library: /OWB_DISK/Disk1/stage/Components/oracle.swd.jre/1.3.1.0.0/1/DataFiles/Expanded/jre/linux/lib/i386/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
The Java version installed on the m/c is
java version "1.4.2_04"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_04-b05)
Java HotSpot(TM) Client VM (build 1.4.2_04-b05, mixed mode)
How I can install OWB9.2 on ES3.0, or Oracle will issue some patch for the same.
Regards
Vipin Rana

I had a similar problem using Red Hat. The solution was to reinstall JVM. There is an article in metalink describing the process:
http://metalink.oracle.com/metalink/plsql/ml2_gui.startup
Subject: How to Reload the JVM in 9.2.0.X
Doc ID: Note:209870.1

Oracle 8i for Linux: Which platform

Does anyone knows which platform is supported by Oracle 8i for
linux?
Here we using LinuxPPC (fpr PowerPC-Platform) with all the given
reqirements!
Does Oracle 8i runs on systems with PowerPC-processor?
Thanx for answer
Dieter Fiebelkorn
null

I had an Alpha I wanted to install 8i on under Linux, but at
this point it only supports Linux on an Intel box. You may want
to check the migration path to see if Oracle plans to port to a
Power-PC
null

PowerPC build for Linux?

Similar Messages

Maybe you are looking for