PowerPC G5 will not boot up. HELP PLEASE!!

hi all. i have had my g5 a while now whithout any problems until now. basically i opened firefox & mail & my mac suddenly froze, i couldn't force quit or move my mouse so i had to manually shut it down. whenever i turn it on now it either does two things 1. loads to white screen with apple logo & the fan goes faster & faster like an airplane is taking off & 2. a black screen with the fan going mad. im assuming it's either my firmware nothing more but i could be wrong.
this is what i have done so far. pressed all the keys for commands like ctl-alt-opt-del, would boot from my cd but cd tray doesn't eject so cant try this method, iv cleaned the inside of my g5 getting rid of the dust on the ram's etc.. still no luck any suggestions?
basically i am getting an imac soon so all i am worried about it all my files on my HD have gone. if there is a way of getting to my hd & recovering my files so when i get an imac i can just simply transfer them over.
thanks

thank you for your reply.. hopefully im able to still recover my files from my hd. im from england so i don't think ill purchase that one but i had a look on amazon & is this the same kibd of product? http://www.amazon.co.uk/gp/aw/d/B001A5SK56/ref=aw_d_iv_electronics?is=l&qid=1309 203015&sr=8-1
iv booked an appointment at my local apple store so ill see what they have to say first. if my hd has packed in ill go mad as i would have lost all my music & important documents arrrrrrrrrrrrgh!! im a dj so this would really kill me. fingers crossed my appointment goes well & they tell me my hd is ok

Similar Messages

  • Pt880 Neo will not boot. Help please

    Here is my setup.  I just picked up a brand new msi pt880 neo series and a p4. 2.8 fsb800/1mbcache.
    I was current using a ati 9800 pro and crucial 512 pc3200 ram. i installed two  maxtor 160g hd and i was going to run raid in a pci slot raid controller.  so far i know the ram works and the video card and the one of the hd.  My power supply supports up to 400watts. I have a btc dvd burner, floppy and a liteon dvd rom.  im also running 4 fans.  
    My problem is that when i turn it on, it powers up but nothing else works.  On the D-bracket 2 i get 4 red lights lite up and nothing else.
    Im stuck and not sure what to do now? Is it my mb or chip or a combination of things? Thank you very much for your time.

    Heya,-
    Sounds interesting enough to me aswell... I had the same problems with my Mobo too... But it turned out to be the CPU. Intel has release some 'C' versions of that 2.8GHz CPU, which might be some scaled-down Extreme Edition CPU's or even a down-graded Prescott CPU.
    So what I needed for my mobo to get it work was:
    - Updated BIOS version
    - Another CPU (working) to get the new BIOS version on my mobo...
    The shop that helped me, gave me some information from Intel. You can check your exact type of CPU in their website... They gave me the link to the Intel P4 CPU Specification Update. And in that document on page 17 I found out that my CPU with package ID: SL6Z5 is in fact a down-graded Extreme Edition CPU, and should have been sold as a tray-CPU, and not as a boxed CPU... DAMN INTEL!... But anyway, they gave me a headache and some nights of incredible sleeplessness...
    Just for your information... This is how I found out that it was my CPU causing all this problem:
    - Assemble the system with only mainboard and PSU (no memory, no vga, no keyboard)
    - Connect the CPU fan to see if the system will start running
    - Turn-on the system and see if the CPU fan will keep running
    - Shut down the system
    - Insert the CPU
    - Turn-on the system again... If it fails on your CPU, it should shutdown after 5 seconds...
    > To find out if it's related to any of your other peripherals, insert all the things step by step (first memory, then vga, etc...) and see if your system will fail on any of these peripherals.
    It just might turn out to be a harddisk that's drawing too much current from your power-supply....
    ANyway, just to share some thoughts! Good luck!

  • HT3743 my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

    my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

    If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808

  • PowerPC G5 will not boot (from CD, single-user, verbose...) - is it dead?

    I had posted this in the OSX forum but had a suggestion to post here as well - any suggestions would be greatly appreciated!
    My PowerPC G5 (10.4.11) will not boot. It gets to the grey Apple screen, and then freezes there, no progress dial, and the fan starts racing after a couple of minutes sitting there. Here is what I have tried so far and the results:
    -Will not boot normally - freezes at grey screen
    -Will not boot from CD (DiskWarrior, 10.4 Install disc OR 10.3 Install disc - which came with the G5, each time it freezes at grey screen
    -Will not boot in safe mode - freezes at grey screen
    -Will not get into single-user mode, freezes at "DART-enabled"
    -Will not get into verbose mode, freezes at "DART-enabled"
    -Holding option when starting up allows me to select a drive (hard drive or CD), but then freezes at grey screen when attempting to boot from either drive
    -Option-Command-Shift-Delete does nothing when starting up, again freezes at grey screen
    -Option-Command-P-R does not work - well, maybe it deletes PRAM, but it never even gets to the grey screen, freezes with a blank (black) screen, so that can't be right
    -I CAN get into open firmware & eject cd, cannot boot up from there - it freezes at the grey screen with a circle w/a line through it
    -Attempted to reset NVRAM from Open Firmware, "reset-nvram" and "set-defaults" both were ok, then it froze after "reset-all"
    I have tried everything I could think of and everything I can find - Does anyone have any possible suggestions or ideas for what I can do?
    I had a couple suggestions that it could be RAM, so I'm going to try to run Apple Hardware Test, though if I can't boot from a CD, that will make that very difficult. Any thoughts?

    Hi svman8-
    Did you also reset the SMU?
    One thing known to cure various ills is to replace the battery.
    This may be a helpful link:
    How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005)
    Luck-
    -DP

  • Mac Mini (PowerPC version) will not boot - or reinstall...

    All of a sudden my MacMini is playing up. It will not boot. I have tried leaving it overnight and reinstalling the OS to no avail.
    It boots from CD and reads the install disc, but it hangs everywhere for ages. It verifies the install DVD - then just fails to install. And I have tried installing to external USB drives too with the same result.
    I have run DiscWarrior twice and that sees no problems...any ideas? Any help will be greatly appreciated,
    Neil

    Does the external HD have a GUID partition table?
    Is the external drive formatted Mac OS X Extended (journaled)?
    Is this a 2011 or late 2012 Mac?
    How was Mavericks installed on the external drive?
    Who is the builder of the drive mechanism in the external drive?
    Who is the builder of the external enclosure?
    What type of interface does the external drive have USB2, USB3, Firewire 400, Firewire 800, thunderbolt?
    Is the external enclosure directly connected to the mini?
    Have youtried a different interface cable?

  • My IMac will not boot up help?

    My IMac will not boot up.  What should I do?

    Have you tried Lion recovery mode? See http://www.apple.com/macosx/recovery/ and http://support.apple.com/kb/HT4718

  • Macbook Will Not Boot Up Correctly - PLEASE HELP

    Hello,
    So my MacBook Pro 17" boots up to the login screen where I have two names. One of the login names works fine, but the other will not let me sign in. After I put my password, the desktop background for that name comes up then it freezes and just has the spinning mouse rainbow. I really need to get back in that name as it has all of my programs and projects. How do I fix this?
    Thanks, Joe

    well, it boot up fine now. i ran one boot in safe mode, then restarted and now it boots up fine. i don't really know how safe mode works, but it seemed that one boot fixed the problem!

  • I am running windows 7. We updated firefox and it would no longer open. I uninstalled it and reinstalled from firefox website. I click on the firefox icon and it will not open. Help please

    It installs and I attempted to launch the browser and it never starts. I tried to uninstall, but it says firefox is running. I restart my computer and uninstall and try again. It still will not open after install is complete. Why won't it ever open up? Help please!

    Right-click on your Windows Taskbar and select Start Task Manager. Look in Task Manager for processes running that are Firefox-related, such as Firefox.exe or plugin-container.exe. If you see either of those, right-click each of them and select "End process". Then try again to start Firefox in [[Safe Mode]]. <br /><br />
    *If Firefox will start in Safe Mode, select the option you are presented with to disable your add-ons and plug-ins and restart Firefox normally. You likely have a plug-in, add-on, or a combination of two or more that is causing the problem. Because Firefox allows users to customize endlessly, sometimes there can be conflicts between customized items. From the Firefox menu bar, go to<br /><br />Tools -> Add-ons<br /><br />then re-enable them one by one, restarting Firefox after each and testing after each one to see which one or combination of two or more is causing the problem. <br /><br />
    *If Firefox will not start in Safe Mode, make sure you again check Task Manager and end any running instances, then uninstall Firefox and download a fresh copy from mozilla.org/firefox using another browser temporarily. Re-install Firefox (see: [[Installing Firefox on Windows]] for more help ) and try running Firefox again.
    Please report back your progress.

  • Accidentally deleted bonjour from my computer.  iTunes will not open.  Help Please.

    Accidentally deleted Bonjour from my computer.  iTunes will not open.  Running Windows XP. Help please.

    Uninstalling and then reinstalling your iTunes should also get your Bonjour reinstalled.
    For the reinstall, use an installer downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    ... or you could get it back via your Apple Software Update for Windows.
    If you'd prefer not to uninstall iTunes, try the following procedure.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.

  • I am trying to update i Tunes to new version i get a message saying iTunes has an invalid signature and will not install.Any help please.

    I am trying to update iTunes to new version .
    When it goes to install i get a message saying iTunes has an invalid signature and will not install.
    Any help please.

    Go directly to Apple link to download
    http://support.apple.com/kb/DL1426
    Select "Save" instead of "Run".  Once downloaded, double click the iTunesetup.exe to install.

  • N91, will not send texts. help please

    N91, this phone will make and recive calls, and recive texts, but comes up with "msg not sent" everytime you try to send one. Have tried different sims, with the same results! Can anyone help please
    Thanks

    Hi
    I was told its a big that is being fixed. In the mean time to clear this delay out (that builds over time after alot of sms). Backup your DRM activation keys, contacts using PC suite (PC suite phone memory backup that backups phones ROM). Then do *#7370#. You will have to then re-install any SISX appplications you bought though, re-synch contactsetc
    mobile101

  • I have a rogue contact on my Skype iPad app that will not delete.  Help please

    I have the Skype app for my iPad but have a rogue contact under iPad contcts thT will not delete.  have deleted app and reinstall
    ed three times but it is still there. help please.  has anyone else had this problem.

    I have this exact same problem.  Did anyone ever answer you?

  • TS1541 I tried importing email addresses from gmail and now my address book is locked up and will not work. Help please.

    I tried importing email addresses from gmail and now my address book is locked up and will not work. Do I need to delete my address book software and reinstall? If so, what is the proper way to do this? New to Macbook software. I have tried several things and nothing has helped. I have backed up photos, movies, etc. My addresses are on my iphone so I can sync them later right if I loose my data?
    Thanks for your time and expertise,
    T.

    You can probably resolve this by removing some Address Book preference files rather than deleting your Address Book application.
    First turn off Synchronize in Address Book Preferences if you can.
    Next restart Address Book and try to export everything to your Desktop.
    I have had a play and found my Address Book preference files. In the following ~/Library is the Library within your Home folder. Any numerals may differ on your Mac. Quit Address Book before doing anything with these.
    1 - Display details and things set in Address Book Preferences
    ~/Library/Preferences/com.apple.AddressBook.plist
    2 - Has no data - not sure what this does
    ~/Library/Preferences/com.apple.AddressBook.abd.plist
    3 - Has last sync date - may have more if I used sync
    ~/Library/Preferences/ByHost/com.apple.AddressBook.sync.000393735c06.plist
    4 - My contact details
    /Library/Preferences/AddressBookMe.plist
    5 - Individual addresses and groups stored as separate files within:
    ~/Library/Application Support/AddressBook/Metadata
    6 - All of these addresses are are also in this single database:
    ~/Library/Application Support/AddressBook/AddressBook-v22.abcddb
    If you wish to remove all addresses drag both 5 & 6 to your Desktop.
    If you wish to reset preferences drag 1 your Desktop.
    Removing 3 may resolve sync issues but I am unable to test this.
    If you wish to reset everything drag all except 4 to your desktop.
    Apple has an interesting page at: http://support.apple.com/kb/TS2481
    I hope this helps.

  • I have updated to iOS8. Now cannot connect to BT speaker I have been using for months. BT discovers it but will not pair. Help please

    I have updated to iOS8. Now cannot connect to BT speaker that I have been using for months. BT discovers it but will not pair. I have tried switching both off & on but nothing helps.

    I am sure the BT speaker not the problem because it works fine with iOS8 on my iPad!
    ... And no I am not trying to connect both at once.  To be sure I have switched the iPad off completely and switched the speaker off & on but still with the same failure to pair.  The iPhone sees the speaker but then gives me the pairing unsuccessful message when asked to connect.

  • IPhone will not turn on, help please!!!

    My phone will not turn on! The apple logo comes up for a couple secs then it turns off. It does this even when plugged into wall and computer, any help would be greatly appreciated because I can't get on iTunes to restore it! Thanks!

    Try to force your phone into recovery mode. Disconnect it from the USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. http://support.apple.com/kb/HT1808
    Then you can restore your phone: http://support.apple.com/kb/HT1414

  • My Razr maxx will not boot.  Help

    My phone worked this morning, then I shut it down to charge it with the automotive charger from Motorola.  I tried to start it and nothing happened.  I have read all of the posts about holding down the power and the - (minus) volume button and also the + (plus) volume button and nothing  happens.  I then tried to plug it not the wall socket and nothing happens, I do not  even get a sustained white light.  It flickers when I plug it in then goes off.  I have an old Razr Maxx and it will boot up but will not import my contacts from the SD card.  Help

    If there on your SD card they can be Save when you Pull the Card but when you install it in your Replacement Razr don't format the card or they'll be Gone and i just remembered if you have a SD Card adapter you can put your micro in it and then put the Adapter in your Computer and get your Pictures i have done this in the past. Sorry your Maxx didn't come around and Good Luck on the Next one. Let me Know how it's Working when you get it.. b

Maybe you are looking for

  • Bank Master Data ( Creation of new Account )....

    Dear SAP Gurus,    Good morning to all,i have one doubt regarding creating a new Bank Master Data in Production, please help me.My user has a requirement which is like one Cash Credit Account has been opened with SBI bank where with the same bank and

  • How to read text in .kep files

    hey friends, how to read text in .kep files please help me . with regards, s.jagadeesh babu

  • How to fill color in a cell having particular string when using convertto-html

    Hello Scripters, I have downloaded AD health check script but I am wondering if the cell color be changed for a particular string. Like all the cells having text "Failed"..should be in red color. Here is the script- Function Getservicestatus($service

  • Final Cut Studio Upgrade: Printed Manuals?

    Does anyone know if there are printed manuals included for each of the applications in the upgrade version of Final Cut Studio 2? They couldn't tell me at my local Apple Store and didn't have a boxed upgrade version to examine. Thanks for whatever in

  • Flash keeps 'not responding' when exporting .swf & file WAY too big

    Hello! I am creating an animation using ActionScript2 on Flash Professional CS5 and whenever I try to export (or even test) my animation, the progress bar comes up but the progress does not move. Then after about a second the dreaded '(not responding