Powerpivot add-in menu does not show in Excel 2010

To whom it may concern,
Sometimes, excel.exe *32 is left in the windows 7 professional task manager but all excel sheets are closed (sometime VB script opens excel sheet, and then close the excel sheet); then, manually open an excel sheet 2010 with powerpivot add-in,
powerpivot add-in menu does not show in Excel 2010. If excel.exe *32 is deleted from task manager manually, then, open Excel 2010 with power-pivot add-in, the powerpivot add-in menu is always visible. Try to figure out why excel.exe *32 is still left running
in the task manager.
jianmin chen

Ed, I read your reply. I thought about closing it before, but today I still experience the same issue after I reinstall the powerpivot for Excel 2010.
I came cross powerpivot error: unable to load the table in the powerpivot windows when the excel sheet is opened, yesterday it worked fine. After I reinstall powerpivot for Excel 2010, SQL 2008, the issue goes away.
And I tried to use pivot table instead of powerpivot in Excel 2010, and then plan to write stored procedure to build some relationships used to set up in powerpivot windows; so, I am still planning to use excel sheet, instead of writing a windows form application.
Try to get more experience in excel.
jianmin chen

Similar Messages

Acrobat Pro "save as" function in the file menu does not show the current directory of the file

I have installed CC but Acrobat Pro gives me headaches.
The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
I use Windows7 professional 64bits.

I use what seems to be the latest version available on the Cloud:
To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
So here it is, open:
When I do a "Save as", it takes me to a totally different place on the disk!
Very annoying...
Thanks for your time!
JJ

My Safari preferences menu does not show "security"

My Safari preferences menu does not show the option Security (only lettering types) wahat do I have to do?

Click the little "pill" icon (upper right of the window) to expand all the tabs.

Popup menu does not show in JTextField

I have a JPanel with a popup menu that works perfectly, as long as the right mouse button is clicked on the JPanel. However the popup menu does not show if the right mouse button is clicked on a JTextField that is within the JPanel.
What has to be done that the popup menu shows always?
this.addMouseListener(new java.awt.event.MouseAdapter()
public void mouseReleased(MouseEvent e)
this_mouseReleased(e);
protected void this_mouseReleased(MouseEvent e)
if (e.isPopupTrigger())
popPopup.show(this, e.getX(), e.getY());

There are up to 20 JTextFields in the JPanels an the application has a lot of JPanels of course. Adding the listener to each and every JTextField means a lot of extra code. Is there really no generic solution to this problem???

Spry menu does not show sub menu on iPhone

Hi there,
Spry menu bar from CS6 does not show sub menu on iPhone. Please help.
Thanks,
Tee
<TA

I was debating Sudarshan's
if your Spry menu is triggered on 'hover', it will not work on an iPhone as touch-screen phones cant do 'hover'.
any menu with NO hover (mouseover) effect or trigger will work on touchscreen devices. Pick a menu plug-in that doesn't have any associations to 'hover' factor.
as most touch-enabled menus will still contain hover rules or mouseover javascript handles. Even most JQuery menus will contain :hover rules.
There is no disagreement about that with you, Al.

The main menu does not show in explorer/PC!!

I have a problem that i hope somebody can solve. When i am publishing my site from iWeb directly to me.com the website is working fine. If i export the website and then preview it in explorer on PC the main menu does not appear for some reason. I would be greatful if somebody could give me an explination on what is wrong? Please!

Where are you "exporting" your site to?
The iWeb navigation menu will not show on a PC running IE if Java is turned off.
You can get round this by "hiding" the standard navigation using the "page" inspector and building your own.
See...
http://iwebfaq.org/site/iWebNavigationmenu.html

Add table list does not show database view in Configuration Manager

Hi,
I am trying to add a database view in the table tab of the configuration manager. The view does not show up in the list of available tables in WCM 11.1.1.6 version. This is possible in the 11.1.1.4 version. Anyone else facing this issue?
Thanks
Soumya

I think what is being asked is "How do I expose a database view as a schema table in Configuration Manager?"
This is accomplished by creating a database view within the WCC database schema (and with the WCC schema user as the view owner). The view then will appear as a table in the "table" tab in Configuration Manager.
One caveat in 11g is that the user created by RCU does not have any privileges to read/create views in its own schema. You may need to grant privileges to views for the WCC schema user before this will work.

Hi my add no:301705896039 does not show my 'buy it now' option... and cannot put a reserve price

As said above...cannot put a reserve price on my add... I did put a buy now price... but it does not show up on the add!!!

pylapatus wrote:
As said above...cannot put a reserve price on my ad... I did put a buy now price... but it does not show up on the ad!!! For an auction you do not need a reserve price -- just start the auction at the minimum price you want. You should not start at 0.01 -- most auctions these days rarely get 2 bidders. And you need at least 2 bidders for an auction to work for you. If there is a bid, the buy-it-now option will disappear. You do have a bid showing for that item -- so Buy-It-Now is removed for your auction. Option of last resort: You can (1) cancel the bid, (2) then cancel the auction and (3) list again with options properly set up.

Airport Express: Airport pop-up menu does not show up in iTunes on my PC after setup procedure

I have set up Airport Express following the manual. The device glows green, so I presume it is working properly. However, the Airport popup menu does not appear in iTunes on my PC running Windows 7. I am trying to stream audio to a FiSKD500 speaker. I can stream music frommy iPhone 4 when it is plugged into the speaker,

Is there really nobody else with this problem? Really?

Add-in option does not show anywhere in Outlook

Windows Vista Enterprise SP2 - 64bit : Office Pro 2007 SP2
I have downlaod and installed the add-in (admin priveledges), which seemed to go smoothly.
After starting Outlook and going to create a new message, the Add-in does not appear anywhere on the ribbon. I have checked the Trust Center and the add-in does not appear anywhere, not even the disabled section.
I have uninstalled, reinstalled, rebooted etc, but still no luck.
The dll files exist in my Prog Files (x86) directory.
Does anyone have any suggestions.
Thank you

Hi Kaj
Another thing to check would be whether there is the registry entry for the addin. Follow these steps:
- Run 'regedit'
- Go to HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins
- See if there is a subkey under it by the name - AcrobatDotComAddin.Connect
- If yes, ensure that the 'LoadBehavior' value for the key is 3.
In case there is no entry by that name, the addin is not installed properly.
Two possible ways to try again:
- Exit all apps, unistall the addin(from control panel), reinstall the addin, start outlook.
- In case it still does not appear(after trying the above step) and you are confident of playing with the registry, you can also try adding the following entry in the registry:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins\AcrobatDotComAddin.Connect]
"Description"="Acrobat.com Add-in for Microsoft Outlook Beta"
"LoadBehavior"=dword:00000003
"FriendlyName"="Acrobat.com Add-in for Microsoft Outlook Beta"
Save the above text to a file(test.reg)and then double click it. This would help only if the addin is installed and you can see the files in the appropriate folder.
Aditya

Creative Cloud Menu does not show installed Lightroom App

I'm wondering if there is something I can do to fix the problem. Lightroom does work as long as I dig through menus to find it.

Did you have a stand alone light room ?
You need to uninstall the stand alone Light room from the Computer. Then you can follow these links:
1. Lightroom Mobile app says I'm running on a trial but I have been using LR 5 for quite some time now on my laptop. Will my trial expire and roll over to my account, or will I have to pay?
2.Re: I´m a CC member (PS and LR). Why does LR say it´s 28 days left on a trial for LR mobile?
3.Why doesn't LR show as installed in CC
Please refer to:
Lightroom 5 is installed but Creative Cloud doesn't think so… can't update LR
Re: Creative Cloud not showing apps.
Reinstall LR5 over the creative cloud
http://helpx.adobe.com/lightroom/kb/lightroom-trial-ccm.html
They are useful.
Regards
Rajshree

Open with menu does not show pages

When i download email with a pdf attachment, i want to open it in pages. The open with dropdown has 8 choices, but does not include Pages? How do
I edit what appears in this drop down?

Pages does not open .PDF files. TO do so you will need iBooks which is an Apple app that is free in the app store.
Good Luck !

Create PDF Acrobat X Pro - does not display embedded excel 2010 tables in word 2010 properly

Hello,
I bought Acrobat X Pro and the first document I used 'Create PDF' on was a Word 2010 document with embedded (read linked) Excel 2010 tables.
When I opened the document after creating it the linked tables had a little arrow in the corner of a white box with a help text message of "click here to activate". The pdf is basically unusable.
Is there a setting to ensure that these embedded excel tables are created as normal tables - I do not want to have to keep pasting in tables/images into my Word documents when they are all updating automatically.
Thanks in advance for any help you can give me.
Regards,
Craig

Hello,
i am having exactly the same issue with Acrobat X Pro - with linked Excel 2010 tables in Word 2010.
Has there been a resolution to this eissue - it is potentially very time consuming to work around this issue for me.
I would post my files but I don't know how to attach them to the thread - only my second post .
Cheers,
slobbering_dog
This is the Word File - the table is an Excel 2010 spreadsheet linked (via Paste Special >Link) .
This is the resultant PDF file:
Thanks in advance - again !!
Message was edited by: slobbering_dog_72

Brige CC Place menu does not show Illustrator and Indesign

Hello,
In my Bridge CC the menu item "place" is only showing "in Photoshop" and "in After Effects". But it doesn't show Place "in Indesign" and "in Illustator" and "in Premiere".
How can I fix that? I think it happens after I switched to 2014 versions only.
Thanks in advance,
Wilmar Boer

Why did you have to call Support? An Adobe Engineer who programs Photoshop gave you the answer a whole day ago.
Of course the Blur Gallery is available in version 14.2.1. It's just not called out in the same place in the menu structure as in the newer versions.
-Noel

My Add-on appearance does not show even if I enable it.

I once had this add-on appearance when opening Mozilla Fox. After some computer automatic update, the add-on appearance disappeared. I can find it, it is enabled, but no picture is displayed. I tried downloading other appearances, but none of them worked as well.

Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy > Firefox will: "Use custom settings for history"
*Deselect: [ ] "Always use private browsing mode"
When you are in Private Browsing mode then the persona is disabled and you get the default theme and possibly a purple PB icon in the Firefox menu button or the right end side of the menu bar (tab bar on Linux) and "(Private Browsing)" appended to the title bar.

Powerpivot add-in menu does not show in Excel 2010

Similar Messages

Maybe you are looking for