Powerpoint 2007 Organization Chart two shape point to one shape

I am using PowerPoint 2007 and created a Organization Chart. I created 3 shape and named A, B and C. A and B is the first level and C is the second level. How to make A and B point to C? I tried all option of add shape but not work. Please help! Thank you!

Hmm. I must be doing something wrong. So here is what I did.
I created a shape that is just two points to create a line, as you did with your mask version. Then I made a null for the "Kite" layer you used. I then put in your expression, replacing "Kite" with the name of my layer. The expression then gives me this error:
"AE Warning: property or method named '2' in Class 'Array' is missing or does not exist. It may have been renamed, moved, deleted, or the name may have been mistyped. A property expression referencing it was disabled.
'Scale' (line 7) of layer 3 ('Shape Layer 1') in comp 'Comp 1'
Also, I am using the latest version of AE in case that matters. Thanks in advance for any help.

Similar Messages

Two Datasources pointing to one connection pool...

Hi All,
I have heard you should not have two datasources pointing to one connection pool that each datasource should have it's own pool. What type problems would occur if you did that in WLS 8.1? I heard in 9.2 and above you are not allowed to do that and I suspect it is because of some issue doing many (datasources) to one (connection pool).
Any comments about this?
Thanks,
-Tony

Hi Hector
Could you refer the SCN & SAP links
SAP WEB Dispatcher and DMZ
Access SAP Webgui and Portal Through Internet Using Web dispatcher
https://help.sap.com/saphelp_nwce10/helpdata/en/48/8fe37933114e6fe10000000a421937/frameset.htm
SAP Web Dispatcher - SAP Library
BR
SS

Two mount points for ipod.

Hi there,
When I connect the IPOD there appear two moint points. One with the name of the device (in this case Mike) and one with the name 'Ipod'.
The first works fine so I can sync with banshee without problems. The second throws the following error:
Unable to mount the volume 'Ipod'
Details:
mount: wrong fs type. bad option. bad superblock on dev/sdb1. missing codepage or helper program. or other error in some cases useful info is found in syslog - try dmesg | tail or so
dmesg output:
[miguel@miguel ~]$ dmesg | tail -40
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 68 00 00 08
sd 9:0:0:0: [sdb] Assuming drive cache: write through
usb-storage: device scan complete
sd 9:0:0:0: [sdb] 39075372 2048-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 9:0:0:0: [sdb] Attached SCSI removable disk
FAT: invalid media value (0x2f)
VFS: Can't find a valid FAT filesystem on dev sdb1.
FAT: invalid media value (0x2f)
VFS: Can't find a valid FAT filesystem on dev sdb1.
FAT: invalid media value (0x2f)
VFS: Can't find a valid FAT filesystem on dev sdb1.
sdb: detected capacity change from 80026361856 to 0
Clocksource tsc unstable (delta = 4398030963787 ns)
ath5k phy0: unsupported jumbo
usb 1-2: USB disconnect, address 6
usb 1-2: new high speed USB device using ehci_hcd and address 7
usb 1-2: configuration #1 chosen from 2 choices
scsi10 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
scsi 10:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
sd 10:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 10:0:0:0: [sdb] 39075372 2048-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 68 00 00 08
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] 39075372 2048-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 10:0:0:0: [sdb] Attached SCSI removable disk
FAT: invalid media value (0x2f)
VFS: Can't find a valid FAT filesystem on dev sdb1.
FAT: invalid media value (0x2f)
VFS: Can't find a valid FAT filesystem on dev sdb1.
FAT: invalid media value (0x2f)
VFS: Can't find a valid FAT filesystem on dev sdb1.
[miguel@miguel ~]$
¿Any help or ideas?
Thanks

The post of dlew86 is the good way to do it, but there is some errors in what he wrote:
First, you need to know what is the label of the firmware partition:
$ lshal -u `hal-find-by-property --key block.device --string /dev/sdd1` | grep volume.label
volume.label = 'iPod' (string)
replace '/dev/sdd1' by the device your ipod uses. The default label is 'iPod', but if you installed RockBox, it is probably different.
Now, create a fdi file in /etc/hal/fdi/policy/, e.g. 99-ipod-ignore-firmware.fdi (.fdi, not .rules like owain wrote):
<?xml version="1.0" encoding="UTF-8" ?>
<deviceinfo version="0.2">
<device>
<match key="volume.label" string="iPod">
<merge key="volume.ignore" type="bool">true</merge>
</match>
</device>
</deviceinfo>
Replace "iPod" by the label you got with the lshal command.
If volume.label is empty, you can match against the volume.uuid property instead. But in this case, the rule will apply to your ipod only.
Now, restart hal:
# /etc/rc.d/hal restart
It restart fails, it is probably due to some hald helpers still running. This should solve the problem:
# pkill hald
# /etc/rc.d/hal start
Last edited by vdust (2009-10-05 20:02:13)

Color Highlights not working in bar chart with two data points

Iu2019m using Crystal Reports 2011. I have created a bar graph using two data fields in the Chart Expert. I have set the colors for the bars in the Color Highlights tab, but the colors that I have defined have not been applied to the graph.
I have tried changing the colors numerous times and have done it in both design and preview modes. It seems to be somethign with having two data points because I don't have this problem when using just one data point. Please help!

is the colour mode Color by group or color by series

Organizational Chart with specific colors in OBIEE 11g

Hi Gurus,
How to create organizational chart in OBIEE? I tried to follow this link Oracle Business Intelligence by Sandeep Venu: Google Organization Chart in OBIEE 11G
but can't find out how to make specific chart (example chart of manager position) have a red color, the director chart have a green color.
Please help
Regards
JOE

This requirement sounds like it has a possible solution with some html coding. My idea is to :
1) Create a dashboard with two pages.
2) In the first page, create an iframe of the first dashboard.
3) In the second page, create an iframe of the second dashboard.
4) Customize the second dashboard page to have the custom background color.
Please refer to this link on how to customize the dashboard pages: http://www.appsassociates.com/resources/presentations/AA_OBIEE_Customizing_Dashboard_Appearance_NEOAUG_Fall09.pdf
Please assign points if helpful.
Thank you,
-Amith.

PDF and PowerPoint 2007, strange slides and handouts

I'm getting strange output when I create a presentation in PowerPoint and print to Acrobat. The problems happen whether I print Slides or Handouts.
-- On some slides, the slide title is partially or completely missing.
-- In grayscale mode, some graphics show up in color.
-- Solid-color shapes (boxes) show up cross-hatched.
-- For handouts only, some slides have headers and footers, and others do not.
I'm using PowerPoint 2007, up to date, and Acrobat Professional 9.1.3.
I've used PowerPoint and Acrobat for many years and only recently began to have these problems. I've tried changing some of the endless printing options in Acrobat, but nothing I've found so far has made a difference.
Those problems (with the possible exception of the color graphics in grayscale mode, I don't remember) do not happen when I print to Microsoft's XPS format.
Any ideas?
Thank you!

Thank you! That's helping a lot. I don't see how to get grayscale in that route, but at least I'm getting proper color handouts, no errors. Plus it outputs much faster. Hmmm. I haven't tried saving in PPT format instead of PPTX. And then there's an Excel spreadsheet that takes several minutes to output 14 pages via print to Adobe PDF printer (it used to be much faster, I don't know why it suddenly slowed down, I didn't change the spreadsheet), I wonder if that would be faster if I saved in PDF format rather than printing to the Adobe PDF printer.
Again, thank you. You have helped, plus you gave me leads to follow.
ATB,
Mark

Adding Organizational Chart in Pages '09

Does anybody know how to add an organizational chart in Pages '09?
How could I make the connection line not to be curve after adding shapes?
Please discuss answers here.
Thanks

Walt
It is quite versatile.
Of course it does excellent organisation charts but also any other drawing task or outlining.
You can map, space plan, diagram, in fact almost all drawing tasks. That includes wireframing websites, user interfaces and gadget modelling.
www.graffletopia.com has a wealth of "stencils" which are collections of ready made artwork which are so beautifully implemented in Omnigraffle that I wish Apple and Adobe would steal/licence it to put in their respective programs.
As a wireframer I think it earns its keep on that alone, everything else is cream. It is also a favored route to get .svg drawings into Keynote/iWork as shapes. Something Apple has totally neglected.
It should be considered the missing drawing application in the iWork suite.
Peter

Create organizational charts using application express

I would like to create organizational charts using the application express(HTMLDB). How do I go about it?
I also tried the Aria sample application for HTMLDB 2.0, but when I try to run the scripts it asks for some bind variable parameters ' :NEW ' and ' :OLD ' which I could not identify. Can anybody help with understanding the standard inputs to this?

A perfectly reasonable question, phrased in
a perfectly reasonable way (in my opinion).
On this, I believe, we'll have to agree to disagree. I point you to the following document,
particularly the section "Questions Not To Ask":
I'm not sure why you feel the need to point me at a
document entitled "Questions Not To Ask",
particularly when I wasn't the one asking the
question....I pointed you to the section "Questions Not To Ask" in the document entitled "How To Ask Questions The Smart Way" not because I believe you need help asking questions, but because the advice given in that document directly contradicts your opinions:
"Q: How can I use X to do Y?
A: If what you want is to do Y, you should ask that question without pre-supposing the use of a method that may not be appropriate. Questions of this form often indicate a person who is not merely ignorant about X, but confused about what problem Y they are solving and too fixated on the details of their particular situation. It is generally best to ignore such people until they define their problem better."
I admit, I failed to follow the advice of ignoring the person when I first replied, but the issue is whether it was an appropriate question, which I think this quote clearly indicates it is not.
Robert

Can't line up two shapes on top of each other -they repel away with each try. Need help!

I have been using Illustrator since version 88 (1988), and I just recently upgraded from CS4 to CS5.5. I'm on a Mac intel running v10.6.8
I was trying to lock a rectangle over a circle. I'm in preview mode and couldn't see the snap to point action, so I zoomed up to 3200% and turned off preview to view it better. I made the circle first, then I made the rectangle. I selected the complete rectangle with the direct selection tool and grabbed it by the top left point and dragged it to the top control point on the circle. After letting go of the rectangle it jumped away, only a .5 of a pixel but still it wouldn't stay in place. (at the 3200% view it looks like 3/8 of an inch jump)
A slight miss alignment in PostScript can cause a mitre limit problem "down the road" if my design happens to get reduced —and besides I'm just not used to Illustrator being inaccurate.
Being that this is CS5.5, I'm hoping someone else that has experience this and has a fix. Perhaps there is just a menu turn off/on that I'm not aware of for this version...
Any help here would be greatly appreciated.
See reference images below showing the jump distance -— its as if the two shapes have magnetically opposit polarity and they repel each other:
--Rob

Whenever installing a new version, at least review the information about new features.
Turn off the infernal Align To Pixel Grid feature.
JET

Organizational charts thru ADE

Hi Guys
Oracle have mentioned that it is possible to create organizational charts using ADE (Application Data Exchange) but not how to do it? Does anyone know how this is done or can they point me in the right direction?
Many thanks
Ciaran

Hi Raju,
thank you for taking this question!
Please check the link below:
FAQ: HR-OCI 4.6 (Human Resources, Organizational Charting Interface )
SAP Help answering your questions circumstences: <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/43/69acffed1b30f3e10000000a11466f/frameset.htm">Click here...</a>
I hope i could help you!
Kind regards,
Zsolt

Embedding SWF into Powerpoint 2007....

I use this method to place a SWF in Powerpoint 2007. (see below).
My question is... how do I make the path relative and not absolute? So whatever path/destination I put in the "Movie" property is absolute and if and when I sent this PPTX file to someone (like in a folder) the SWF no longer plays. I wanted to make a path that is relative... so instead of putting "C:\Use\Profile\Desktop\Flash.swf" I wanted to know if I could do something like "Flash.swf" and then it'll play the SWF since it'd be in the root (or maybe a subfolder).
Place SWF in Powerpoint 2007:
1. Click Office Button.
2. Click “Powerpoint Options”
3. Under the “Popluar” tab check “Show Developer tab in the Ribbon”. Click OK
4. Click the “Developer” tab.
5. Click the “More Controls” button (wrench/hammer icon)
6. Choose “Shockwave Flash Object”. Click OK.
7. Cursor turns to crosshairs. Drag box to house the object.
8. In the “Properties” pop-up, find “Movie”.
9. Under “Movie”. Paste in the path of the file. (i.e. C:\Users\Profile\Desktop\flashAnimation.swf
a. Try to put the SWF in the same root location as the PPTX.

You can insert a .swf file into PowerPoint using the method you described with both an absolute and a relative path. But that will just insert it and play it as a linked file.
What you seem to want to do is to embed the file. That's tricker. The .pptx file extension apparently has a known and unfixed bug that won't let you embed a .swf. There's nothing out there, that I could find that may be of help. But you could try these two steps:
In the properties panel for the insered swf, find the EmbedMovie property and set it to "True".
Then Save As... your Presentation to the older file format (.ppt not .pptx). This may show up in the Save menu as "PowerPoint 97-2003 Presentation".
This may work, you should take note that the file size should increase significantly. If the Presentation's file size doesn't increase, then you know it hasn't been embedded and the animation will not play if you email the file (because it's not included).

Help for PowerPoint 2007 crash when running embedded SWF file with latest Flash Player?

I have developed in Xcelsius 2008 SP4 a dashboard with only Excel as the source. I output to PowerPoint and then save it as a PowerPoint 2003 PPS file. On more than a few machines that have PowerPoint 2007, PowerPoint crashes when I attempt to run the presentation. This happens only with later versions of Flash Player. I have tried uninstalling/reinstalling the latest Flash Player but it still crashes. However, when I revert back to Flash Player 10.1.159..., in PP 2007 the presentation runs perfectly.
With regard to the error I receive in PowerPoint 2007, it is as follows:
Error Signature:
AppName: powerpnt.exe AppVer: 12.0.6500.5000 AppStamp:49a68f9d
ModName: flash10u.ocx ModVer: 10.3.181.34 ModStamp:4e011a1d
fDebug: 0 Offset: 003a893c
Of note is that this behavior does not happen in PowerPoint 2003 nor does it happen when the file is saved as a SWF and launched directly in the browser on the problem machines.
I have to assume that this has happened to others so any help you could provide would be VERY appreciated.
Thank you

Hello,
on the first glance I see these: data="file:///Macintosh HD/Users/user/Documents/Website/Working.swf", what means the path to your swf file is pointing to your local hard drive which nobody can see except you. Please replace all thes pathes with the correct ones and load up your file(s) again.
If the problem remains, please send a link to your website in question, no matter how it looks like..
Hans-Günter

Anyone have an interactive organizational chart template, or know where I can get one?

Anyone have an interactive organizational chart template, or know where I can get one? I am trying to put together a toolkit for organizations of different shapes and sizes to use for plannning, and was hoping to present boxes with titles, and space for them to enter the names of the staff assigned to the respective positions.
Have to believe that others have already developed a solution for this and hoping someone out there is willing to share . . .

List the files you have from the download and maybe we can tell you which one you want.

Agents determination using Organization chart

Hi,
I have a Organization chart.
and I assigned a Job in that Organization chart to the Agents assignment in TASK.
Job Is assigned to a user ( US.....)
I am not knowing how to get that agents So as to start the task.
I am taking about the AGENTS field in the control tab of the ACTIVITY
Regards

Hi,
In my Scenario I have an Org Object.
In my Org Object there are two positions.
1 Manager
2 Admin
Both the positions are assined a Job and User each.
Now I want the person in the Manager position must be Doing the activity,
Your Questions
You tell me who are the possible agents? -
> the person in Position assigned ( Manager in this case )
Whats their Position? -
> The position which is assigned( Manager in this case)
How you identify them?----> This is what I am asking you
To whom you need to send the workitem?-------> Manager in my case
Regards

Coding an organization chart

i have been asked to create an organization chart like structure which can be modified dynamically. can any one help on this.

Keynote does not have the same kind of tools to do this as PowerPoint. There are "connection lines" in Keynote which will move with an object, but that's about it. You might look at some other tool to do org charts, such as OmniGraffle.

Powerpoint 2007 Organization Chart two shape point to one shape

Similar Messages

Maybe you are looking for