PowerPoint 2013 - Choosing from only custom templates

Dears,
I need to force the Powerpoint 2013 users in my organization to choose ONLY from the corporate templates based on category (Internal, external, generic). Is there a way to provide an option to select the type of template while opening PP 2013,
using a dialog box or some other way and then embed a watermark or header/footer with details of the creator, into the slides ?
Thanks,
Sudhan

To preview within PowerPoint, we just right-click the video (in the designer layout) and choose "Preview". If we do this under a User account, we receive the error I described above. However, if we try using the same PowerPoint file under an Administrators
account, performing the same actions, it shows up on the slide fine - it will even play.
Using the embed code from YouTube (current or old - with and without fixed source links and versioning, etc.) produces the same results. It'll embed the video, but it can't be played in or out of a presentation without throwing an error (for accounts with
User rights). Again, it will work under an Administrator account.
And I am aware that at one time there was an issue with PowerPoint and online videos such as those from YouTube. However, since mid-April of this year, there have been a few updates to bring back that support. I believe, now, if the video can play in the
browser, it can play in PowerPoint. See
http://blogs.technet.com/b/bgp/archive/2014/04/09/support-for-youtube-videos-in-powerpoint-returns.aspx for more details. And yes, we have those updates (or their superseded ones) installed - as I mentioned before. The problem is an access problem; exception
code c0000005 generally refers to an access violation exception, and that is definitely proven when we change permission levels from User to Administrator.

Similar Messages

  • In Outlook, allow only recipients to read mail from a custom template

    Hi all,
    The default "Do not Forward" template only allows recipients from an e-mail to read it. A delegate to the sender or recipient mailbox cannot open the message.
    How can I reproduce this with a custom template?
    I would like an e-mail to be RMS-encrypted only between the sender and the recipient(s) and be sure that the mailbox(es) delegate(s) cannot open the message.
    What I am trying to achieve is:
    - Only the sender and the recipient can read the message
    - The recipient can reply to the message
    - The recipient can print the message
    Is there any way to define "recipients" permissions when defining a template (instead of "anyone")?
    Thanks !

    Had the same problem.
    And got a confirmation from Microsoft, that it is not possible currently. But there are some AddOns availible for Outlook. Because the RMS API and outlook object model allowes that.
    Glück & Kanja Email Protection Add-Ins
    Gigatrust
    http://www.gigatrust.com/desktop_client.shtml
    TITUS
    http://www.titus.com/RMS.html
    But you have to pay for that. and it does not help with OWA
    Exchange MVP www.msxfaq.net

  • Sharepoint 2013 (Danish): Deploying site from a custom template fails with error "Duplicate content type"

    I cannot create a site-template in my own language (danish) and deploy a site based on the template.
    I created a template from a "fresh" SharePoint project site with no tampering.
    When trying to deploy a new site based on the templat I get the following error:
    In Danish:
    Beklager, men noget gik galt
    Det blev fundet et navn på en dubletindholdstype "billede".
    Tekniske oplysninger
    Fejlfinding af problemer med Microsoft SharePoint Foundation.
    Korrelations-id: 96646c9c-3213-a088-c6c4-537b0815313c
    Dato og klokkeslæt: 21-06-2014 10:23:36
    In English:
    Sorry, something went wrong
    A duplicate content type name "billede" was found.
    Technical Details
    Troubleshoot issues with Microsoft SharePoint Foundation.
    Correlation ID: 0b656c9c-52ee-a088-c6c4-5132070e3c4e
    Date and Time: 21-06-2014 10:31:35

    Need details from ULS logs about Correlation ID: 0b656c9c-52ee-a088-c6c4-5132070e3c4e
    Check below:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/e955e737-e12e-4afa-b446-bb6e0f05e9b1/duplicated-content-type-error-creating-a-sharepoint-2010-site-from-a-custom-site-template?forum=sharepointgeneralprevious
    http://aramacciotti.wordpress.com/2012/04/04/the-case-of-the-duplicated-contenttype/
    http://community.office365.com/en-us/f/154/t/69416.aspx
    If this helped you resolve your issue, please mark it Answered

  • ORA-01152 error while creating db from custom template

    I have a database based on the "general purpose/transaction processing" db, but with a custom tablespace/data added. I have attempted to clone this database by using dbca to create a custom template (including data) from this database. The template creation appears to be successful -- however, when I use dbca to try to create a new db from this custom template, I get the following error when dbca attempts to initialize the instance:
    ORA-01152: file 5 was not restored from a sufficiently old backup
    ORA-01110: data file 5: <path to my custom tablespace .dbf>
    If I select "ignore" at this point, I get further errors, the next error is
    ORA-06550: line 1, column 7: PLS-00201: Identifier 'DBMS_SERVICE.DELETE_SERVICE' must be declared
    I'm using 11gR2, and am relatively inexperienced on the dba side, any help appreciated.
    Thanks,
    Ben

    Update: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
    I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
    Ben

  • Office 2013 simply refuses to update templates

    Hi All,
    Was wondering if you could help as i'm really getting thin on ideas now.
    I've been working with Azure RMS for a couple of weeks with no problem but all of a sudden I can't get Office 2013 to update the custom templates I've been creating on multiple devices.
    I've created custom templates before that have refreshed in Office perfectly but new ones simply will not download. As far as I'm aware everything is set as it should be  in terms of the template is published and my user account is within the scope
    of users who can use the template.
    I have installed the RMS sharing app on my Win 8.1 machine and when right clicking a file to complete an in place protect the most up to date templates are present but whilst working directly within Word or Excel etc the templates are out of date.
    I've tried all sorts of combinations of deleting the templates folder in: %AppData%\Local\Microsoft\MSIPC\Templates and deleting the LastUpdateTime dword, signing out of office and signing in again but nothing I try seems to help.
    Does anyone have any ideas of what I could try?
    Thanks in advance!

    While this feature (departmental templates) is in Preview, Office applications don't recognize these templates, by default.  From
    https://technet.microsoft.com/en-us/library/dn642472.aspx#BKMK_HowToConfigureCustomTemplates, see step 8 and the behavior you're seeing:
    Not all applications can support departmental templates. To do so, the application must first authenticate with the RMS service before downloading the templates. If the authentication process does not occur, by default, none of the departmental templates
    are downloaded. 
    There is a script that you can run (see the Note) for this to work with Office applications during the Preview period. We were hoping to get the script on the Download Center, but it's currently on the Connect site.  If you have problems accessing it,
    email [email protected] 

  • PowerPoint 2013: New problem experienced in last seven days - Placeholders not taking objects Cut from them and attempted to re re-anchored.

    Hello,
    I am running Office 2013 Professional Plus and in PowerPoint 2013 (15.0.4605.1000 64 bit) on Windows 8.
    Ihave always been able to anchor content to placeholders (tables, text, images, and so on). In the last week this is no longer the case if an object has been anchored already.
    For example, I have an existing slide with a Content placeholder, and a table anchored to it. I cut the table, reselect my placeholder to get the white handles, and attempt to paste. It will paste the table as it was, but it is no longer anchorable to a
    placeholder.
    This is a critical issue for us as we are about to upgrade our corporate  brand/template and be required to upgrade thousands of documents and hundreds of thousands of pages of content.
    Can anyone advise a workaround? This is my first post on MDN and apologize for any missing elements.
    Anthony

    Hi Anthony,
    Thank you for posting in the MSDN Forum.
    Since the issue is more relate to the end-user, I'd like to move it to
    Office2013 pro general discussions forum.
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thanks for your understanding.
    Best regards
    Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can't publlish slides from Powerpoint 2013 to sharepoint slide gallery

    Just upgraded to office 2013 - previously had 2007.  I had no problems in the past publishing slides to my slide gallery in Sharepoint, or copying slides from the gallery to Powerpoint.  Now I can't publish and I can't copy to Powerpoint from sharepoint.
    I have a couple slide libraries in my sharepoint... so when I go to publish from PowerPoint 2013 I browse and choose the right one
    https://[our server]/sales/2012%20Sales%20Slides/
    Then hit publish... I'm trying this for a single slide only. When I do so I get the error:
    1 of 1 slides that were being published to https://[our server]/sales/2012 Sales Slides/ filed.  Try publishing again.
    When I try selecting slides from my gallery and hit the "Copy to Slide Presentation" button I get the error:
    This feature requires Microsoft Internet Explorer version 5.5 or later.
    I'm using IE9.  SharePoint 2007
    Please help.

    I am having this same issue.. I have about 8 users that can't publish from PowerPoint 2013 to SharePoint 2010 but I also have a few that can. The interesting part is the ones that can publish were all upgrades rather than fresh installs. I created a fresh
    VM of Windows 8 and Office 2013 and was unable to publish. However, when I uninstalled 2013 and installed 2010 on the same VM I was able to publish. I then upgraded to 2013 and was able to publish UNTIL I rebooted at which point I was unable to publish. The
    frustrating part is there are no errors anywhere: event viewer, SP logs, Office UI, nothing.
    Does anyone have any ideas? I am pretty much out.
    Michael

  • No Preview Displaying with Custom Templates in 2013

    We have deployed custom PowerPoint and word templates using the instructions in Deploy custom templates in Office 2010.<o:p></o:p>
    In 2010, they seem to be working perfectly fine. When you select File - New there is a <companyname> folder next to Featured folder and when you click on it you can see 3 thumbnail images
    of the custom templates. When you click each thumbnail it presents the appropriate preview image that are specified in the XML file. <o:p></o:p>
    In PowerPoint 2013, you can see the thumbnail image but the Preview is blank. I have attempted to use both .png and .jpg files as well as saving the template as .pptx and .potx. The .pptx seems
    to work the best as the .potx seem to just give a spinning wheel in the preview window. In Word 2013 there is no preview comes up at all - it just creates the new file. You can still create a new file using the template. <o:p></o:p>
    We are using the Group Policy to deploy the templates to all users. The Registry settings appear to be correct and I have tried some suggestions in the forum without any change. <o:p></o:p>
    Is there a different way to deploy them to 2013 users.
    Any ideas??
    Diana

    Hi,
    Just tried this on my desktop, issue also repro’s on my Office 2013, but everything looks OK for Office 2010.
    Since we did this with the instruction specified for Office 2010, there might be some updates on below code for 2013 version of Office in
    XML configuration file which used to create thumbnail and preview files:
    <o:preview filename="1big.gif" source=<path> />.
    The bad news is we cannot find any descriptions/documentations on the internet about this for Office 2013 currently. We might still need to wait to see if Microsoft will publish any technical articles on this to guide
    user on how to make it on Office 2013.

  • Slow spooling and printing from Powerpoint 2013

    Has anyone experienced slow spooling and printing of PowerPoint documents from PP 2013?
    If I attempt to print the same document from PP2010, it spools and prints normally. It seems that the document background has something to do with slowness.
    I saw an older KB where Microsoft suggested to disable background printing. Disabling background printing makes it even worse.
    Thanks
    here is a link to a PowerPoint file
    https://www.dropbox.com/s/hle8x32j6wemday/SLOW.pptx?dl=0

    Hi,
    Does this only happen with PowerPoint documents? What about other Office files? How many machines are affected by this issue?
    Please first check whether you have the same print settings in PowerPoint 2013 and 2010.
    Also, if this is a network printer, please try to add it as a local printer, then try again and see if issue persists.
    Regards,
    Ethan Hua
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • I have several custom templates in the my templates/templates chooser. How do I remove and/or delete them.

    I have several custom templates in the my templates/templates chooser. How do I remove and/or delete them?

    Hi Muizen,
    Your remark that Yvan's "remarks are completely useless to (you)" may be correct, but that's hardly his fault.
    Your question was posted in the Numbers community, a place for discussions of issues and techniques specific to the Apple spreadsheet application Numbers, part of the iWork set.
    This community is one of several at the Apple Support Communities site, a place for discussion of technical issues specific to Apple hardware and software.
    Your question regarding removing unwanted templates, posted in the middle of a discussion of Numbers templates (with a side trip to templates made with Pages, the word processing and page layout application that is also part of the iWork set) contained no reference to any application other than Numbers having produced those templates.
    Yvan may have added 'unclearness' to your understanding of the issue, but the origin of that unclearness is your initial post. In case you've forgotten it, here is that post again, quoted in its entirety:
    "Hi Edgar,
    I am struggling to remove custom templates that I don't need.
    The advise is:
    Use the Finder to navigate to the templates and send them to the trash. Look in:
    Username/Library/Application Support/iWork/Numbers/Templates/My Templates.
    However after Application Support iWork does not show up.
    Do you have a solution?"
    Where in that post do you make it clear that the custom templates you are talking about are "MS Word" templates? Where do you even mention that fact?
    In your most recent post you state: "I tried this approach but reported that there is no iWork in my system."
    Actually, you did not report "there is no iWork in (your) system,"t. You did report that "iWork does not show up" when you followed the path given.
    You had made no mention to that time that iWork was not installed on your computer, and the fact that you had posted a question about removing templates in a forum(and in a discussion thread) specifically for one of the iWork applications would lead any reasonably intelligent reader to assume that the application was on your computer, and that, like the other users in this discussion, you were asking about Numbers templates, or at least about templates for one of the iWork applications.
    Given that assumption, and given that the supplied path was the correct path to a user's custom templates for numbers, the most likely explanation of iWork's name missing from the path would be the one Yvan assumed—a misstep by the user at the beginning of the path.
    Regards,
    Barry

  • I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
    You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
    You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
    Menu > Format > Import Styles
    The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
    Peter

  • Why do I only have photos option to choose from for uploading my resume?

    I'm applying for jobs and have Dropbox plus PDF but when it comes to attaching my resume on job sites I only have the option to choose from photos.  Why?!!!!  Why in the heck do I only have this ONE limited option?  I have PDF and Dropbox- how come I can't choose my resume from there to attach my resume on job applications on line? 
    Is there some setting or some kind of control I need to fix?  Any feedback appreciated. Sorry, I'm frustrated!

    There are are certain functions that can only be executed during the "WhilePrintingRecords" pass of the report execution. Any formula that uses one of these functions cannot be summarized.
    Also any formula that is is based on aggregated values cannot be summarized.
    HTH,
    Jason

  • ITunes no longer loads "checked" songs onto my iPhone 5.  It seem to be all or nothing or choose from the 4 categories.  What happened to "sync only checked songs?"

    iTunes no longer loads "checked" songs onto my iPhone 5.  It seem to be all or nothing or choose from the 4 categories.  What happened to "sync only checked songs?"

    In the case you aren't trolling, here's some alternative mapping services.
    Apple is constantly working on improving their new Maps service, but until it reaches the level of finesse necessary to be usable, take a look at some alternatives.
    If you would like to send a suggestion to Apple, please go to http://www.apple.com/feedback or you can Report a Problem via the Maps app by tapping the bottom right.
    Bing Maps offers a very good maps service with Bird's Eye, a feature similar to Flyover. It's arguably better than Google Maps.
    http://itunes.apple.com/us/app/bing/id345323231?mt=8
    You can use Google Maps by creating a shortcut to the Home Screen with help from the article below.
    http://www.ign.com/articles/2012/09/20/how-to-get-google-maps-on-ios-6
    MapQuest also has a very nice app available.
    http://itunes.apple.com/us/app/mapquest/id316126557?mt=8
    Nokia Maps is another great service that you can add to your Home Screen via a web shortcut.
    http://m.maps.nokia.com
    Waze is another very well reviewed app.
    https://itunes.apple.com/us/app/waze-social-gps-traffic-gas/id323229106?mt=8
    Here's an article detailing how to receive Public Transport directions.
    http://www.wired.com/gadgetlab/2012/09/transit-apps-ios6-woes/?pid=3798
    If you want a YouTube app, Google has made a very improved version available on the App Store.
    http://itunes.apple.com/us/app/youtube/id544007664?mt=8

  • How to get only custom fields from a SharePoint 2010 list?

    I am working with the Client Side Object Model. In a console application I am retrieving all fields from a custom list. The problem is the Clientcontext fetches me a bunch of internal fields I do not want to be included. Also this causes some of the fields
    to appear more than once.
    string siteURL = "http:XYZ";
    ClientContext context = new ClientContext(siteURL);
    Web oWebSite = context.Web;
    context.Load(oWebSite);
    context.ExecuteQuery();
    //Get the list by title
    List produktKatalogListe = spLists.GetByTitle("Produktkatalog");
    CamlQuery camlQuery = new CamlQuery();
    camlQuery.ViewXml = "<View/>";
    ListItemCollection listItems = produktKatalogListe.GetItems(camlQuery);
    context.Load(produktKatalogListe);
    context.Load(listItems);
    context.Load(produktKatalogListe.Fields);
    context.ExecuteQuery();
    foreach(Field field in produktKatalogListe.Fields)
    Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
    Is there a way to print only custom fields? This would mean omitting fields like
    internalID, GUID...
    I tried the following:
    if(!field.Hidden)
    Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
    Unfortunately this not only does not solve the issue but is also not a very good solution for the case I do want to display custom but hidden fields.
    Algorithmen und Datenstrukturen in C#:
    TechNet Wiki

    The following approach seems to solve the issue. Instead for checking if the field is not
    Hidden I checked whether it is not FromBaseType.
    if(!field.FromBaseType)
    Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
    Algorithmen und Datenstrukturen in C#:
    TechNet Wiki

  • I can't email a photo directly from iPhoto.  First, I only have two "themes" to choose from instead of 8, and when prompted to fill in the "to" and "from", the "from" box has "MobileMe" already in it, and I can't get rid of or change it. I have OSXLion

    I can't email a photo directly from iPhoto.  First, I only have two "themes" to choose from instead of 8, and when prompted to fill in the "to" and "from", the "from" box has "MobileMe" already in it, and I can't get rid of or change it. I have OSXLion

    I understand, as that was the place I would change it before 8.3 but now that option of Mail Days to Sync is not available?  Any idea why that would be?

Maybe you are looking for