PowerShell 3.0 will not install. Please Help

I've got a Windows Server 2008 R2 Standard 64bit and according to system properties Service Pack 1 installed.
However looking under installed updates the KB976932 is not installed.
My goal is to install PowerShell 3.0 however I get the message the update is not applicable to the system.
So far I've verified all requirements are in place I have .NET Framework 4.5.1 Version 4.5.50938
I have PowerShell 2.0 installed and WinRM is running BITS Version 7.5.7601.17514 is also installed.
I also enabled PowerShell ISE in the features so it too works.
So the only other prerequisite is SP1 and depending on where you look that is installed also.
I've also downloaded the system update readyness tool 64bit (KB947821) and this didn't solve the problem either.
I looked at the CheckSUR.persist.log and found No errors detected. However it did have this line just below that message.
(w)
Unable to get system disk properties
0x0000045D
IOCTL_STORAGE_QUERY_PROPERTY
Disk Cache
Customer Experience report successfully uploaded. Thank you for participating. For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.
After running sfc /scannow Windows Resource Protection did not find any integrity violations.
Please someone help I've spent days trying to correct this problem and it shouldn't be this complicated this is a fairly new Windows Installation.

Hi YKK PC Tech,
The general steps of the upgrading:
1.   To install the update
KB976932, after install to check the if service Pack 1 exist as Rhys W Edwards mentioned.
2.   Install Microsoft .NET Framework 4.0 at
http://go.microsoft.com/fwlink/?LinkID=212547
3.   Install Windows Management Framework 3.0 with
Windows6.1 KB2506143-x64.msu
Best Regards,
Anna

Similar Messages

Flash player will not install please help.

I am running IE and windows 8. flash works fine for chrome and any other web browser I use. The program I use for work speficially uses IE for maps and they will not load. I have unistalled and tried reinstalling, i tried to use it before when it was already installed on my computer, ive changed all the settings in internet options to what the help page says. When i try to reinstall at the get.adobe all i get is a the page with the adobe logo, but where it should have the doanload button and all the information it is just white... please help i need to get this solved before monday.

Flash Player for IE in WIndows 8 is modified and embedded in the browser by Microsoft. You cannot update it or reinstall it from here... ONLY through Windows Update. There's a Microsoft KB update installed that prevents any modification outside of Windows Update for the ActiveX plugin in WIndows 8 or 8.1.
Firefox, Opera and Safari use a standard Flash Player plugin. Chrome (like IE) has its own porprietary build (called "PepperFlash"), which is modified and embedded in the browser by Google. It functions independently of the Standard or ActiveX plugins.
The problem you're seeing ISN'T a Flash Player problem. It's a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released it. The pages (or in this case the app) can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
Adobe can't fix this because Internet Explorer 11 isn't their product and the problem is in the browser itself, not the plugin.

Bootcamp update 3.1 and 3.2 will not install please help

I am running windows 7 32 bit on a silver mac book pro. it wants me to update my boot camp version from 3.0 to 3.1 but when i go to download it, it comes up with a progress box but then after a while it gives me an error basically stating that if this problem persists try just downloading it and installing it manually well i have done both ways even downloaded it form the apple website to which no avail. when i go to run the standalone updater it give me the error " the application was unable to start correctly (0xc0000005) click OK to close the application" i have tried running it as an administrator, and using the compatibility mode tried it with xpsp2,3 and vista sp2,3.. please help me as i am not the only one having this problem in my department

I donno if this is much help, but here goes.
This was my problem: When I upgrade boot camp from 3.1 to 3.2 using the apple update software (online, and on my windows 7 64bit) It didn't upgrade. I did the restart and everything went smoothly, but it just didn't upgrade.
Then I went on to apple boot camp software site to download the software to upgrade manually, then It says I need to locate bootcamp64.msi or something close to that.. I couldn't locate it on my hard-drive... so failure there
Turns out that file is on the MacBook Pro Mac OS X install DVD, under boot camp - apple
direct the location there and click on the bootcamp64 thing, and it should work (If you have the same problem as me)

Libflashplayer.so will not install - Please Help!

Hello,
I am using a linux netbook, however I cannot install a higher version of flash player.
I am currently using version 10.0 but want to upgrade.
I have downloaded the flash 10.2.159 from the adobe site. I downloaded the file as a tar.gz and then I extracted the file to home/user.
After doing this, I copied the libflashplayer.so file to /usr/lib/mozilla/plugins, however when I restart my netbook, flash player does not install and removes version 10.0. The 10.2.159 version has not installed on my netbook and instead, removes flash from Firefox.
Any ideas what I am doing wrong? Some help would be greatly appreciated.
Thank you.

Wish I had the Answer.
I have the EXACT SAME ISSUE!!!
Driving me CRazy,
I have tried everything that I can possibly read or decipher online,
still No Luck

Exchange 2013 CU5 will not install, please help

Hi everyone
Please help, I am trying to upgrade Exchange 2013 SP1 to CU5 but it just stops at the following point, please help:

Hi,
Have you disabled any third-party firewall or AV programs for a test?
Thanks,
Simon Wu
TechNet Community Support

Adobe Photoshop CS3 Will Not Install PLEASE HELP TRIED EVERYTHING

I downloaded from Adobe the Photoshop CS3 Extended Trial directly from Adobe. (BTW I am on Vista 32)
The first time I tried installing, ADBEPHSPCS3_WWE.exe successfully unpacked, I successfully transitioned to the Adobe Photoshop CS3 installation, and it appeared to install. After 30 minutes or so, the installer finished and simply said that shared components had installed but the Photoshop CS3 Component install failed.
I always got in the log Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.MFCLOC,version="8.0.50727.163",type="win32",publicKeyToken="1fc8b3b9a1e18 e3b",processorArchitecture="x86"'. Please refer to Help and Support for more information
This, I know, is everyones typical problem.
I turned off firewall and antivirus.
I uninstalled ALL Adobe and Macromedia programs, including Flash and Acrobat.
I used Windows Install Cleanup Utility to remove them.
I downloaded the CS3 Clear from Adobe and cleared at levels 1, 2, and 3.
I created the Administrator account on my computer and tried everything on the Administrator account.
I tried installing Photoshop CS3 with compatibility mode for XP SP2.
I tried:
1. Open an Administrator command prompt by right clicking on Start -> All
Programs -> Accessories -> Command Prompt and selecting "Run as
Administrator" and clicking "Allow" for the elevation prompt
2. In the command prompt, type the command below
fsutil resource setautoreset true C:\
3. Reboot the machine
I tried:
Get command prompt up. It has to be run with admin rights so save yourself some time and run it this way.........Start/programs/accessories/.....right click command prompt and click run as administrator.
Then paste these commands in 1 after the other
regsvr32 vbscript.dll (THEN PRESS ENTER)
and
regsvr32 jscript.dll (AGAIN PRESS ENTER)
I even tried installing in Safe Mode but the CS3 setup would not initialize.
I do not know what else to do. I have CS2 which I will use, but I was really hoping to move to CS3 which is supposed to be better and faster. Does anyone know anything else to do? I am not a computer noob but I am not about to reinstall Vista. If anyone has any suggestions they would be greatly appreciated.

I was in the same predicament and after spend many hours over several days trying a multitude of things I finally found an easy fix (below):
========================================
Assuming you have Internet Explorer 7 go to:
Tools/Internet option/Advanced
Click the Reset dialog box. This will bring IE7 back to its default settings. You should reboot your computer. After logging back into Windows load IE and let it take you though its initial setup. When you are done close IE and install Photoshop.. This worked for me,,, hopefully it will work for you!

Leopard will not install PLEASE HELP

I just got leopard for my macbook gen 2. It has a 512X2 processor. When I instert the disk it acts like it is going to boot up 3 times. then it spits the disk back out. I have tried to boot the disk while restarting, but it doesn't work either. Does anybody have any suggestions?

bump

TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Try this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Trying to install visual studio on my mac and it is freezing during the install and I have to reboot, I have run out of ideas as to why it will not install. amy help with this would be greatly appreciated

Trying to install visual studio on my mac and it is freezing during the install and I have to reboot, I have run out of ideas as to why it will not install. amy help with this would be greatly appreciated

maybe something is wrong with your install or your computers hardware as in a periodic defect
or the cd is dodgy
installed
vs express 2013 for desktop
vs express 2013 for windows (metro)
vs express for windows phone
on my windows 8.1 think I installed them when I was still using win8 though
without problems
when the same bootcamp partition was windows 7 ultimate 64bit
I was running
vs 2010 pro
and vs 2008 (for winCE)
without problems

I am trying to update i Tunes to new version i get a message saying iTunes has an invalid signature and will not install.Any help please.

I am trying to update iTunes to new version .
When it goes to install i get a message saying iTunes has an invalid signature and will not install.
Any help please.

Go directly to Apple link to download
http://support.apple.com/kb/DL1426
Select "Save" instead of "Run". Once downloaded, double click the iTunesetup.exe to install.

Tryed installing vista on my mac now os will not load please help

Tryed installing vista on my mac now os will not load please help

Some information please. What MBP model? What OS are you running? How didi you install Vista?

When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

http://borgdatanode42.selfhost.me/blog/index.php?#param=id_48
try to using iTunes via remotedesktop? try without.

Whenever i open my macbook the rainbow spinning wheel continues to spin and will not load PLEASE HELP

whenever i open my macbook the rainbow spinning wheel continues to spin and will not load PLEASE HELP

Which os version are you using?
Please describe in detail all you have attempted to do in order to resolve the issue.
Troubleshoot the spinning beach ball

Please help: Windows XP will not install PLEASE

I know this maybe answered else where but I have limited computer access at the time and ANY help will be GREATLY appreciated.
K8N Neo2 Platinum w/amd64 3500
1 gig of kingston mem
200 gb and a 60 gb Maxtor sata drives (non raid setup)
A cd burner and a dvd burner
I can post and boot to bios with no problems and everything shows up fine.
I insert Win xp pro cd and everything goes well and then all of a sudden it starts saying it can't find files on the cd while copying them onto the hard drive. I have tried several times and it always happens, sometimes different files. I have also tried an Win XP Home cd with the exact same results. The Win xp pro cd came with the SP2 on it.
I have tried many combos on my drives: installing on the 200gb, installing on the 60gb, unplugging one or the other, plugging in to sata 1/2 and sata3/4!!!! I have also reinstalled all the hardware again, checking each cable as I went along. I also reseated the cpu and cleaned thermal compound, but fresh on and hooked up fan (Zalman cnps7000a)
I HAVE NOT installed the raid drives when xp ask for the f6 thing. I don't want raid, just 2 drives.
PLEASE Any help will be greatly appreciate!!!!!
LoneStar

Hi. I just popped onto the forums to post a topic almost identical to this one, but with a few key differences - so I'd thought I'd stick it in here instead of taking up space.
Here's the gist of things -
My Dad and I recently built a PC over Christmas (well, he built, I watched and drank tea.), and it worked fine - half life 2 was downloaded and then completed. Now however, the problems have begun. (this isn't about half life 2, by the way.)
First, the specs - (I know these need more detail, such as PSU and voltages. I'll add those soon.)
MSI K8N Neo2 Nvidia nForce 3 Ultra Chipset motherboard
Athlon 64 Bit 3000+ CPU
1GB Corsair RAM
160 GB Sata Hard Drive
nVIDIA GeForec 6800 GT
Windows XP Home Edition SP2
Bios V 1.3
Plus onboard sound, floppy/7-in-1 card reader and DVD/CD RW. I'll post the motherboard specs later, I'm at work at the moment and I can't remember them.
Right, down to business - I tried to connect and install an external wireless LAN card through a USB connection (I know this card works as it was used on my old PC) and to cut a long story short, I messed it up by using the wrong drivers - and I made things worse by trying to fix it in a hurry, basically screwing up windows. So, I'd thought I'd re-format the hard drive and re-install windows. It was a new PC, there was nothing important on it, and I thought it was about time I learnt how to do a format anyway.
Now the problem - despite formatting my hard drive (and thus removing the old, bad, copy of windows) Windows XP Home will now not complete its installation.
It gets through to the third part of the installation (i.e. my computer has rebooted twice so far) where it asks you questions like "Lets set up windows together" and "Lets choose your automatic update settings". Here, (and I've tried this formatting/reinstallatino twice) the PC reboots for no reason, and the standard "Your computer has restarted due to a failure" on a black screen with white writing pops up - offering to start normally, with last known good configuration or in safe mode.
Still with me? Phew, almost there...
Now, whatever I choose, the computer reboots again and then a BLUE screen with white writing pops up saying my computer was turned off in order to stop damage occuring. Here's a summary of the writing including what I thought were the important points:-
"DRIVER_IRQL_NOT_LESS_OR_EQUAL
Disable bios memory options like caching or shadowing
STOP: 0x0000000D1 (0x00FFFFE3, 0x00000002, 0x0000000, 0xF7AD24EB)
Usbochi.sys-address F7AD24EB base at F7ACF000, Datestamp 41107d6"
Also, two more important points. When my dad was putting together the PC, we made changes to the bios, AFTER windows was installed. (Although I'm at work and haven't got them with me yet - I'll post them later.) This means these changes are still present - could they be causing the problem? (And hence would resetting the CMOS help?)
Secondly, I have a SATA hard drive. I've already tried using the SATA drivers from floppy during windows installation, but when I do this the same problem occurs, even earlier - this time windows doesn't even finish copying basic setup files. It jams on "cdaudio.sys" and then crashes to the blue screen.
Any suggestions or ideas you guys have would be of great help - I'm all out of them myself!
(Also, one more point - I conducted the format by changing the bios boot setting to boot from CD, then booting from the windows CD, then deleting the partition/formating the HD/re-installion windows in this manner.)
Remember - a big shiney hug for the first person to help me back to half life 2 goodness!
Cheers,
Spurros.
EDIT - the floppy I used to install the SATA drivers had nforce 3 SATA RAID driver (G72-NVSA020) written on it.

TS1717 iTunes will not open- please help!

My iTunes will not open. I've tried uninstalling and reinstalling, but the same message keeps showing up when I try to open iTunes. The error reads "C\Windows\system32\dssenh.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
Please Help!!!

Taken at face value, you're having trouble with one of the Windows OS dlls associated with Cryptographic Services.
I'd first try the fixit from the following Microsoft document. (One of the things it does is reregister your copy of the dssenh.dll file.)
You cannot install some updates or programs
... but if you still get the issue, I'd try an sfc /scannow as per the instructions in the following document:
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

PowerShell 3.0 will not install. Please Help

Similar Messages

Maybe you are looking for