Powershell Error for SharePoint Online -"The remote server returned an error: (407) Proxy Authentication Required."
I am trying to call sharepoint online from powershell. Below is the code. I get
Exception calling "ExecuteQuery" with "0" argument(s): "The remote server returned an error: (407) Proxy Authentication Required."
$loadInfo1 = [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client")
$loadInfo2 = [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client.Runtime")
$webUrl = "ZZZZ"
$username = "XXX"
$password = "YYYY"
$ctx = New-Object Microsoft.SharePoint.Client.ClientContext($webUrl)
$ctx.Credentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($username, $password)
$web = $ctx.Web
$lists = $web.Lists
$ctx.Load($lists)
$ctx.ExecuteQuery()
$lists| select -Property Title
Raj-Shpt
Hi,
About how to access SharePoint online site using PowerShell, the blog below would be helpful:
http://social.technet.microsoft.com/wiki/contents/articles/29518.csom-sharepoint-powershell-reference-and-example-codes.aspx
Another two demos for your reference:
http://www.hartsteve.com/2013/06/sharepoint-online-powershell/
http://www.sharepointnutsandbolts.com/2013/12/Using-CSOM-in-PowerShell-scripts-with-Office365.html
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Similar Messages
-
I am *almost* all the way through provisioning my on premise SP 2013 farm for SharePoint 2013 Workflows. Workflow manager is installed alongside Service Bus. Workflow Manager client is installed on the SP servers. I built a new simple list-based
workflow in SP Designer 2013, saved it, and published it without any errors. However, when I go back to the list in my portal and try to run the workflow, I get the "Sorry, something went wrong" page, and the logs say this:
05/15/2013 12:41:05.07 w3wp.exe (0x071C) 0x085C SharePoint Foundation
Runtime tkau Unexpected System.Net.WebException: The remote server returned an error: (500) Internal Server
Error. at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result) at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(IAsyncResult result) at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest
request, T content) 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08 w3wp.exe (0x071C) 0x085C SharePoint Foundation
General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Workflow.Client.InternalServerException: Exception thrown from the data layer. For more details, please see the server logs. HTTP headers received from the server
- ActivityId: 0c03f692-8153-43a7-bed5-096214b06168. NodeId: VM22. Scope: /SharePoint/default/d386fdc7-ea7b-4d46-9a39-5c114096eef8/f203a564-e83a-47a3-b11b-e432ac1e6dab. Client ActivityId : 27be1b9c-f990-f096-34a8-7ac8816bc7a5. ---> System.Net.WebException:
The remote server returned an error: (500) Internal Server Error. at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result) at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(... 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08* w3wp.exe (0x071C) 0x085C SharePoint Foundation
General ajlz0 High ...IAsyncResult result) at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest
request, T content) --- End of inner exception stack trace --- at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content) at Microsoft.Workflow.Client.InstanceManager.GetInternal(Int32
skip, Int32 count, String workflowName, WorkflowInstanceStatus workflowStatus, IDictionary`2 activationMetadataFilter) at Microsoft.SharePoint.WorkflowServices.FabricWorkflowInstanceProvider.EnumerateByMonitoringParameter(Guid monitoringParameter,
Int32 offset, Int32 count, Boolean checkPermissions) at Microsoft.SharePoint.WorkflowServices.FabricWorkflowInstanceProvider.EnumerateInstancesForListItem(Guid listId, Int32 itemId, Int32 offset) at Microsoft.Sh... 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08* w3wp.exe (0x071C) 0x085C SharePoint Foundation
General ajlz0 High ...arePoint.WorkflowServices.FabricWorkflowInstanceProvider.EnumerateInstancesForListItem(Guid
listId, Int32 itemId) at Microsoft.SharePoint.WorkflowServices.ApplicationPages.WorkflowPageBase.ConstructStatusArraysWF4(ArrayList running, ArrayList completed, Boolean onlyMyWorkflows) at Microsoft.SharePoint.WorkflowServices.ApplicationPages.WorkflowPage.ConstructStatusArrays()
at Microsoft.SharePoint.WorkflowServices.ApplicationPages.WorkflowPage.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStages... 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08* w3wp.exe (0x071C) 0x085C SharePoint Foundation
General ajlz0 High ...AfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 27be1b9c-f990-f096-34a8-7ac8816bc7a5
05/15/2013 12:41:05.08 w3wp.exe (0x071C) 0x085C SharePoint Foundation
General aat87 Monitorable 27be1b9c-f990-f096-34a8-7ac8816bc7a5
Some sort of "general server error" returns a 500 code, but I can't tell from this what the problem(s) might be. Has anyone seen this before?
Thanks.Go to the server running Workflow Manager and open the Event Viewer; Applications and Services Logs; Microsoft-Workflow; Operational; and look for the underlying error. In our case, the CU for Workflow Manager did something to the SQL permissions and
we ended up using the workaraound described here:
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/054d2a58-8847-4a6a-b1ab-05a79f49fe65/workflow-manager-cumulative-update-february-error?forum=wflmgr
Joe -
I created a web app with claims based authentication ,
basiclly i follwe this blog
http://donalconlon.wordpress.com/2010/02/23/configuring-forms-base-authentication-for-sharepoint-2010-using-iis7/
but when i login it throws 503 error
Server Error in '/' Application.
The remote server returned an error: (503) Server Unavailable.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[WebException: The remote server returned an error: (503) Server Unavailable.]
System.Net.HttpWebRequest.GetResponse() +1126
System.ServiceModel.Channels.HttpChannelRequest.WaitForReply(TimeSpan timeout) +81
[ServerTooBusyException: The HTTP service located at http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc is too busy. ]
System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +10258154
System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +539
Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message) +0
Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr) +61
Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst) +36
Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo) +26062081
Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLogin() +270
Microsoft.SharePoint.IdentityModel.SPWindowsClaimsAuthenticationHttpModule.GetSecurityTokenFromWindowsIdentity(WindowsIdentity windowsIdentity, HttpContext httpContext) +21
Microsoft.SharePoint.IdentityModel.SPWindowsClaimsAuthenticationHttpModule.AuthenticateRequest(Object sender, EventArgs e) +1176
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
any thoughts?
thanks in advance!
Share Knowledge and Spread Love!Hi ,
I was also facing the same issue on changing my credentials. This effects the ServiceTokenApplicationPool and other pools related to the Web applications
To resolve this follow these :
1. Open IIS Manager , under Connection section you can see the Name of your site collection(as
siteCollectionName(Username))
2. Open SiteCollection , select Application Pools. A new window with your Web application pool names would open.
3. Right click on web app, select Advance Setting... , under Process Model select Identity
4. check for Custom account , click set and enter your Credentials and click
OK
Atlast Refresh the IIS manager.
Thank you.
Under application pools Do select the ServiceTokenApplicationPool also and follow steps 3 and 4 -
Hi all,
I'm on the process of transition from Exchange 2003 to 2010, everything is going perfectly alright however ActiveSync is bugging me!
when I try to test activesync I get the following error:
[PS] C:\>Test-ActiveSyncConnectivity -MailboxCredential $user -TrustAnySSLCertificate |FL
RunspaceId : 136b8f68-26ec-4e29-a5bb-cf5ee816e04b
LocalSite : SITE
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : cas01
LocalSiteShortName : SITE
ClientAccessServer : CASSERVERNAME
Scenario : Options
ScenarioDescription : Issue an HTTP OPTIONS command to retrieve the Exchange ActiveSync protocol version.
PerformanceCounterName :
Result : Success
Error :
UserName : user1
StartTime : 12/12/2012 1:02:23 PM
Latency : 00:00:00.0312496
EventType : Success
LatencyInMillisecondsString : 31.25
Identity :
IsValid : True
RunspaceId : 136b8f68-26ec-4e29-a5bb-cf5ee816e04b
LocalSite : Reckon_NS
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : CASSERVERNAME
LocalSiteShortName : SITE
ClientAccessServer : CASSERVERNAME
Scenario : FolderSync
ScenarioDescription : Issue a FolderSync command to retrieve the folder hierarchy.
PerformanceCounterName : DirectPush Latency
Result : Failure
Error : [System.Net.WebException]: The remote server returned an error: (400) Bad Request.
HTTP response headers:
MS-Server-ActiveSync: 6.5.7638.1
Content-Length: 46
Cache-Control: private
Content-Type: text/html
Date: Wed, 12 Dec 2012 02:02:23 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
UserName : user1
StartTime : 12/12/2012 1:02:23 PM
Latency : -00:00:01
EventType : Error
LatencyInMillisecondsString :
Identity :
IsValid : True
environment:
Ex 2003 'Exchange' virtual directory permission: Integrated Windows Authentication, Basic
Ex 2003 'OMA' permission: Basic Authentication
Ex 2003 'ActiveSync' permission: Integrated, Basic
Ex 2010 successfully redirects users from 2010 to 2003 webmail if you login to OWA with a mailbox on 2003Yes Martina,
It has been done through ESM
I cannot test using testexchangeconnectivity.com since I cannot put the 2010 one into production, I will get into trouble if I change the DNS record to the new mail server!
Yes, EAS works perfectly fine with 2010 mailboxes.
OK.
It might be that it's not possible to run Test-ActiveSyncConnectivity against a mailbox stored in Exchange 2003.
Installing KB937031 and enabling Windows Authentication is really all that needs to be done in EX03, in order for Exchange 2010 to proxy the EAS requests.
Martina Miskovic -
Hi Community,
I need you assistance on an issue I'm facing.
The remote server returned an error: (401) Unauthorized.
The remote server returned an error: (401) Unauthorized.)
I'm connecting to a web service (userprofileservice.asmx) to auto populate email address in an Info Path form. It was working fine Friday/Monday. Open the form today and I received error:5566
It's populating in preview but when I open the form in the browser (info path web part) that's when I receive error:5566
I need your help guys please, this is doing my head in.
Cheers Matt
Not sure how you do that?
I'm using SOAP UI to test I can connect to the web service and check the envelope request
details. Before it was giving me 401 error until I granted my account permission to that asmx on the web server.
It's strange because I can connect to the web service by soap UI and see all the information.
I can connect to the web service by using the URL.
Works fine in preview mode.
Was working fine on the production environment until yesterday and now I have error 5566.
All the configuration on the web server is the same.
I'm at a brick wall.. Help -
error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
pattern is like:
success
success
success
success
Error
success
success
success
success
success
success
error
successHi,
As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
the log files in the server side:
https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support -
Installed SP 2013 Foundation in my Hyper-V machine
Created and done all the steps mentioned here http://blogs.msdn.com/b/shariq/archive/2013/05/07/how-to-set-up-high-trust-apps-for-sharepoint-2013-amp-troubleshooting-tips.aspx && http://msdn.microsoft.com/en-us/library/office/fp179901%28v=office.15%29.aspx
for self signed certificate
copied those two certificates in my local machine(base machine) D drive
(D:\Cert)
Both VM and base machine are in same domain
Installed VS 2013 in my base machine and create a Provided hosted app with the copied certificates, (For creation i followed the above mentioned URL)
Just created and hit F5 to run in my base machine, but getting this error
Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.
Please help me to resolve this issue, trying to figure out from last 2 days
Thanks in Advance
ArunHi Harminder,
This happens because an app has already been deployed and you are deploying it again using the same version.
Resolution:
Open the AppManifest.xml file and change the version.
Vivek Jagga - MCTS SharePoint
SharePointExcellence -
I have access to sharepoint site and I have tested this by manually creating the lists and announcements in the sharepoint site.
now the same thing when I try to do it through the c#.net code it always gives me the following :
"An unhandled exception of type 'System.Net.WebException' occurred in
Microsoft.SharePoint.Client.dll Additional information: The remote server returned an error:
(401) Unauthorized."
My code looks like below:
string userName = "[email protected]";
SecureString password = new SecureString();
foreach (char c in "abc123".ToCharArray()) password.AppendChar(c);
using (var context = new ClientContext("https://sharepoint.partners.extranet.adlabs.com/sites/UniTest"))
context.Credentials = new SharePointOnlineCredentials(userName, password);
context.Load(context.Web, w => w.Title);
context.ExecuteQuery();
KrrishnaHi Krrishna,
You code is used to access SharePoint Online, if you are use SharePoint 2007, we can use SharePoint web service or custom web service to achieve your requirement.
Lists Web Service
http://msdn.microsoft.com/en-us/library/lists(v=office.12).aspx
Creating a Custom Web Service
http://msdn.microsoft.com/en-us/library/ms464040(v=office.12).aspx
About SharePoint 2007(MOSS 2007), you can also post it to the forum below, you will get more help and confirmed answers there.
https://social.technet.microsoft.com/Forums/en-US/home?forum=sharepointdevelopmentlegacy
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
Hello,
I have a lightswitch web-application in development, which I need to copy from one computer to the other. I have tried doing it both through Git and by simply copying the solution and opening the project on another machine. The project builds without errors,
but when I try to debug it, it opens a web-browser, loads to 100% and pops up an error - Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.
Now, I have tried repairing Visual Studio on my machine, reinstalling .NET framework and setting <basicAuthentication enabled="false" /> in web.config, yet it still does not run.
When using Fiddler, it shows an error while loading the application - "HTTP/1.1 500 Internal Server Error" , which I honestly don't know what it means.
The application uses ComponentOne and Telerik modules, but they are both installed on both machines.
The application does run perfectly on the original machine, but it is not working on any other one.
Both machines are using Win 8.1 and Visual Studio 2013 Update 4.
I have tried to look this up online, but most people's problem are when they are deploying the app, not just debugging. I would be really happy for any help with this issue.
Thanks!I have the same problem on one of my development machines. Whenever I create a new project, the System.IdentityModel.Tokens.Jwt nuget package is not referenced properly. The project compiles correctly but you are not able to debug as I get the same error
as you.
If you open up your references and there is an error next to any of your references make sure that you correct them. In the case of the jwt reference error, I have to remove the jwt reference and then add it back from the packages folder.
This may not be your problem but could point you in a direction? -
When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table
in the list I created returns this error.
I can connect fine with InfoPath
[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
thank you for your help
Andrew
Hi Andrew. In order for us diagnose this issue, you'll need to capture some network traces using a tool such as Fiddler and share them by sending a Frown.
To capture a trace using Fiddler, start Fiddler, enable the Tools > Fiddler Options > HTTPS > Decrypt HTTPS traffic option, start the capture, reproduce your issue, then stop and save the capture. You can find more information here.
Once you've done that, please send a Frown through the Power Query ribbon and attach the traces.
Thanks,
Ehren -
The Remote server returned an error (404) not found in SharePoint Client Context code
Hi All,
I am getting an error with below line.
"The Remote server returned an error (404) not found"
It occurs when I am trying to fetch some data from SharePoint 2010 List.
For eg. I have a webpart in which i am showing some content on page load and that content is coming from a List.
But I am getting error.
Screen shot for your reference.Here is my code:
ClientContext context1 = new ClientContext("site url");
context1.AuthenticationMode = ClientAuthenticationMode.Anonymous;
List list1 = context1.Web.Lists.GetByTitle("List1");
CamlQuery query1 = new CamlQuery();
query1.ViewXml = @"<Query><Query><OrderBy><FieldRef Name='Title' Ascending='True' /></OrderBy>
</Query></Query>";
Microsoft.SharePoint.Client.ListItemCollection listCollection1 = list1.GetItems(query1);
context1.Load(listCollection1);
context1.ExecuteQuery();
Even i removed the line no. 2 from above code and placed below but still same issue.
context1.Credentials = new NetworkCredential("user", "password", "domain");
Hope someone will solve my issue here. -
Hi
I configured forms based authentication mode in Sharepoint 2013 site. When i tried to log in with windows authentication prompt it throws the following error
The remote server returned an error: (500) Internal Server Error
[WebException: The remote server returned an error: (500) Internal Server Error.] System.Net.HttpWebRequest.GetResponse() +8548300 System.ServiceModel.Channels.HttpChannelRequest.WaitForReply(TimeSpan timeout) +111 [ProtocolException:
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first
1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
How to fix this issue?
Regards,
SivaDid you create a new web application or modify an existing web application?
I would start by checking the ULS logs, maybe there is an incorrect setting within one of the web.config files, or SQL permissions.
Also, as suggested above, check application pools are running.
This blog post is a great guide for setting up FBA, check it through to make sure you haven't missed any steps:
http://blogs.technet.com/b/ptsblog/archive/2013/09/20/configuring-sharepoint-2013-forms-based-authentication-with-sqlmembershipprovider.aspx -
Seeing this error when retrieving data from a SharePoint list. I have full access to the list. Any help would be appreciated.
DataSource.Error: SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
Details:
https://xyz/_vti_bin/ListData.svc/ListName
I think I figured out how to use Fiddler. Here's the information I captured-
This is a Tunnel. Status: OPEN, Raw Bytes Out: 3,797; In: 7,604
The selected session is a HTTP CONNECT Tunnel. This tunnel enables a client to send raw traffic (e.g. HTTPS-encrypted streams or WebSocket messages) through a HTTP Proxy Server (like Fiddler).
To enable Fiddler's HTTPS-decryption feature and view decrypted traffic, click Tools > Fiddler Options > HTTPS.
Request Count: 1
Bytes Sent: 107 (headers:107; body:0)
Bytes Received: 107 (headers:107; body:0)
Tunnel Sent: 3,797
Tunnel Received: 7,604
ACTUAL PERFORMANCE
ClientConnected: 11:06:11.389
ClientBeginRequest: 11:06:11.395
GotRequestHeaders: 11:06:11.395
ClientDoneRequest: 11:06:11.395
Determine Gateway: 0ms
DNS Lookup: 176ms
TCP/IP Connect: 77ms
HTTPS Handshake: 0ms
ServerConnected: 11:06:11.649
FiddlerBeginRequest: 11:06:11.649
ServerGotRequest: 11:06:11.649
ServerBeginResponse: 00:00:00.000
GotResponseHeaders: 00:00:00.000
ServerDoneResponse: 00:00:00.000
ClientBeginResponse: 11:06:11.649
ClientDoneResponse: 11:06:11.649
Overall Elapsed: 0:00:00.254
-= Fiddler Event Log =-
See http://fiddler2.com/r/?FiddlerLog for details.
10:33:33:8092 Fiddler Running...
10:33:33:8118 Fiddler.Network.AutoProxy> AutoProxy Detection failed.
10:33:33:8118 AutoProxy failed. Disabling for this network.
10:33:33:8118 Windows 8+ AppContainer isolation feature detected.
11:01:21:4125 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4145 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4185 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4258 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4268 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4298 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4398 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4398 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4518 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4518 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4528 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4828 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5789 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5820 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5879 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6179 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6530 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6924 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance -
hi
am using below code to get the byte array
byte[] myDataBuffer = client.DownloadData((new Uri(sourceUrl)));
for source of type .txt/.jpg no problem with accessing.but the file type with .master/.wsp/.cs
it is returning "The remote server returned an error: (403) Forbidden error for some file types" Error.how can i get rid of this.please help me
Thanks in AdvanceHi,
It seems there is something wrong with your code, from your code the account and key are the same, because their appsetting name are the same.
string account = ConfigurationManager.AppSettings["StorageAccountName"];
//string account = CloudConfigurationManager.GetSetting("StorageAccountName");
//string key = CloudConfigurationManager.GetSetting("StorageAccountAccessKey");
string key = ConfigurationManager.AppSettings["StorageAccountName"];
string connectionString = String.Format("DefaultEndpointsProtocol=https;AccountName={0};AccountKey={1}", account, key);
return CloudStorageAccount.Parse(connectionString);
If you use CloudConfigurationManager.GetSetting, please consider set azure project as the startup project, if not, this value will be null, this resulted in solution being started as a web project that didn't run inside the Azure emulator. Since CloudConfigurationManager.GetSetting
tries to get setting by contacting Azure (or Azure emulator in this case), and it is not running, it returns null.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi,
I have started using the client object model so that i do not have to go to sharepoint admins to perform some basic operations on remote server. While assigning list item level permission i am getting following error, could you please help. thanks.
The remote server returned an error: (401) Unauthorized.
at
System.Net.HttpWebRequest.GetResponse()
at
Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute()
at
Microsoft.SharePoint.Client.ClientContext.EnsureFormDigest()
at
Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
at
SetDowntimeItemPermission.SetPermission.Main(String[] args) init seems your request was unauthenticated i'm not sure are you using a web application with FBA or desktop application my suggestion would be try to impersonate your request by passing network credentials (COM works on network credentials )
NetworkCredential credentials = new NetworkCredential("username", "pwd", "domain");
ClientContext context = new ClientContext("http://site-url");
context.Credentials = credentials;
Best Regards, Ashutosh | SharePoint World
Maybe you are looking for
-
My project is upgraded from RoboHelp 7 to RoboHelp 9 I found that when i preview topic, my header / footer images cannot be display, it is empty space, text is fine, whichever text inside a master pages can be display, only the header / footer images
-
hi everyone i have a e71 on fw v200 now when i wanna take pictures at night i see lines in the window before taking pictures they have a red like tint is this normal? its only at dark and if i take a picture with flash the photo is without these line
-
When trying to open a report definition file, RAXIIR.RDF from an 11.5.9 environment, using Report Builder 6.0.8.11.3, the following message is displayed: "Warning: Opening a report saved with a newer version of Report Builder. Functionality may be lo
-
Flash Pro CS6 crashes when creating symbol
Okay...here's one I gotta share. I'm building some banner ads for a client. I open up Flash Pro CS6. I create a square on the stage. And when I right-mouse click on the drawing, choose Create Symbol...Flash completely locks up. I get that little Wind
-
Parallax is choppy-Firefox vs Chrome
I am working on a parallax site and when I "preview in browser" at home everything works silky smooth in Chrome. When I take the files to work and try it there (on an amost identical machine) the animation / scrolling is extremely choppy in Chrome bu