Powershot A4000 IS: My computer cannot recognize my camera when connected, saying "Windows cannot op

Powershot A4000 IS: My computer cannot recognize my camera when connected, saying "Windows cannot open the device because the configuration  (in the registry) is incomplete or corrupted". This a recent occurrence. I have reloaded the latest Camerawindow software to no avail. Any recommendations to solve this problem?
Solved!
Go to Solution.

Hi Tedson,
Because of the number of steps that may be involved, I recommend that you contact us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • TS3716 My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music.  I didn't have problems loading music originally, but this is a new occurrence.  Could you help?

    My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music.  I didn't have problems loading music originally, but this is a new occurrence.  Could you help?

    Hey, Thanks a lot.  It took quite a bit of time to resurrect this ipod.  I tried the upgrade again, but still would not recognize my ipod. So I went to the next step and reset my ipod, wiping of all of the information like it was new.  This helped my laptop see the ipod on itunes, but did not sync. So, I deleted the itunes off my computer completely, restarted and then reinstalled the newest itunes, and then restarted.  Finally, it recognized my ipod and started to download each song.  It took awhile as there was 602 songs, but finally it works.  Yea!!!  I never had any problem with my old nano, but this touch has been another animal for sure. Thank you again and also the community for information.  This was a helpful forum and will recommend to others if they get stuck with their ipod or iphone.  Take care, Karen

  • Mac pro does not recognize ipad device when connected via usb port, suggestions?

    mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions?  itunes 10.7

    Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
    The most likely issue:  Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

  • Why does the organizer no longer recognize my camera when I try to download?

    Why does Photoshop Elements Organizer no longer recognize my camera when I try to download?  Is there a new way to downolad?

    Detective" for $30.  Is this something worth investing in or should we be
    able to solve this ourselves?   My brain hurts.
    No it is not worth investing in this because it is a very expensive way of getting viruses. These detectives and those who say they can find the fault on your machine by installing their software are bunch of hackers.
    If your camera is not recognized then it suggests that either your USB is faulty or the cable linking the two is faulty.
    Can you connect anything else like a flash drive to your USB port that you are using for your camera and is it recognized?

  • HT4623 my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ... i have updated all software on the pc and disabled Norton as the

    my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom

  • My new computer with Windows 8.1 does not recognize my iPhone when connected via USB.

    My new Dell Computer with Windows 8.1 does not recognize my iPhone 5 when connected via USB.  I have reinstalled iTunes to no avail.

    Hey, I may have to if I can't get this one to work!!
    I have tried a different USB to no avail.  Both cables work on my old Dell so I don't believe they are the issue. 
    I uninstalled iTunes as directed by Apple Support and reinstalled.  Apparently, Apple Mobile Device Support is not loading with it because it does not show up in programs. 

  • Photos does not recognize my camera when I try to import

    When I try to import I keep getting an "error -9937". Tried using image capture as a possible solution but it also doesn't recognize my camera. Went back to iPhoto and now it no longer recognizes my camera. It worked perfectly fine until this recent update. Any ideas? I don't want to use the Cloud.

    I have seen quite a few similar questions, but none was solved:
    com.apple.imagecapturecore error 9937
    AFTER UPDATING UPDATE OS X 10.10.3 IMAC NO LONGER RECOGNIZES JPG AND CANNOT DOWNLOAD FROM CAMERA
    And all were for Canon cameras.  Is your camera also a Canon Powershot?  If that is the case contact Canon for help.
    As a work-around:  Try to read the photos from a card reader and not directly from the camera.  It is less bother and you avoid problems, if the batteries in the camera are low.

  • Siri recognizes a name when I say it, but says that she "can't find so-and-so" in my contacts, when that person is in my contacts

    As of my update to iOS 7 on my iPhone 5, Siri seems not to be able to find my fiance in my contacts. Her name is there, and Siri recognizes her name and spells it correctly when she says, "I don't see S*** R****** in your contacts... perhaps you meant one of these?" and then delivers a list of people sharing my fiance's first name.
    I also have her associated as my "girlfriend" in the contact. If I say, "call my girlfrend", Siri calls her right up. No problem.
    While I could just always say "call my girlfriend", I have to assume that there's at least one more person in my contacts with which this issue will arise in the future, so I want to know how to solve it. I've reset the phone, I've deleted and re-added the contact...nothing seems to work.
    Any advice?

    I have this issue also.  I ask Siri to call a contact, it repeats and spells the contact exactly as it is in my contacts, then says it cannot find it.  This happens for multiple contacts...

  • ITunes on my computer does not recognize my IPod when connected to my computer

    When my Ipod is connected to the computer, it does not recognize there is a device. I have been able to sync my Ipod to my Itunes in almost 4 months. Songs transfer to Ipod but the playlists do not. I have tried to figure out the problem and nothing has worked so far to correct the problem. I hope someone is able to help me.

    Hello bre8613,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning recognition issues:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Your iPhone, iPad, or iPod touch may not appear under Devices in iTunes after you connect it to your Windows PC. Any of the following may also occur:
    The device cannot be restored in iTunes.
    An exclamation point, question mark, plug symbol, or "X" appears next to the device's entry in Device Manager.
    During an update or restore, the device may no longer be recognized by iTunes
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Computer does not recognize ipod touch when connected?

    when I connect the Ipod to the computer in Windows 7, the screen does not show the icon for this device. Can anyone provide an explanation and solution?

    iOS: Device not recognized in iTunes for Windows

  • How do i transfer music from my windows 7 computer to my iphone 4s when it says the device has timed out?

    when i connect my iphone 4s to my windows 7 pc, it says the device has timed out so cannot connect. what do i do? i need to transfer music from my pc to my phone but it wont connect. please help, thank you!

    Temporarily disable any security software on the computer, then attempt to sync content to the device.
    If that resolves the problem, contact whomever supports the security software (not Apple) and inquire how to prevent their software from intereferring with iTunes.

  • TA38529 itunes doesnt recognize my shuffle when connected.. whats the problem?

    my computer recognizes the ipod shuffle but my itunes program wont recognize and sync

    See here: iPod: Appears in Windows but not in iTunes
    B-rock

  • HT1420 How do I authorise my computer for iTunes when there is no "authorize this computer" or Advanced menu ?  When Apple say Store menu do they mean from the top of the store when logged in ?

    Where is the iTunes Store menu that has Authorize this Computer located and/or Advanced menu ? How do I authorise my computer for iTunes if I cannot find Authorize this Computer or Advanced menu ?  Thank you.

    It's done via the Store drop-down menu at the top of iTunes - if you are using iTunes 11 on a PC then pressing Alt-S should get the Store menu to appear e.g. (screenshot is from a Mac, but it should be similar on a PC) :

  • My ipad is recognised as a camera when connected to my computer running on Windows XP. When my ipad has photos on it and I connect it to my computer it is initially recognised as a camera before my computer crashes.

    When my ipad has photos on it and I connect it to my computer it is initially recognised as a camera before my computer crashes. Resulting in me having to reboot the system again and going through the disc checks to resolve errors. This has happened on several occasions. On previous occasions when I have not had any photos on my ipad it has connected to my computer without any problem.Is there a way of solving this problem without having to remove all of my photos from my ipad.

    Being recognized as a camera is normal. Your computer sees the DCIM folder and doesn't know the difference between a 'real' camera and an iPad.
    One way to stop it could be to tell windows explorer what to do. When you plug your iPad in do you see a little pop up window listing things to do with the device? If so, there should be an option to 'do nothing', which means you tell your computer 'hey, ignore this device'. Your iTUnes will still work when you connect them, the windows protocols that search for images, etc. should just let it be and hopefully stop the crashing.

  • Itunes wont recognize my ipod when connected..what is the deal?

    why wont itunes recognize my ipod touch...

    My Ipod is doing the same, if you work it out could you tell me?
    I did go onto yahoo answers and they said to redownload itunes.
    Then if that didn't work, to take the ipod back.

Maybe you are looking for

  • 802.1X Switch IOS version

                       Hi, I' have realy big layer two access network made of etherogenius Cisco switch with different IOS version and train. My customer bought ISE (ADVANCED AND BASE LICENSE). As far I read on DS it is seem that if you have Minimum IOS

  • How to resize Tabs, Menu bar and Bookmarks Bar 36.0, no "userChrome.css" file help?

    So I lost my profile when FF updated, and had to create a new one. From what I can tell, to do what I want to do I need a Chrome Folder inside the new profile folder. There was none, so I created one. I also created a .css file named exactly how I pu

  • Updating to 4.1 bricked my 3g

    Today i wanted to restore my 3g and all was fine and dandy until the last 1mm of bar left on the screen of the phone when itunes came up with the following error The iPhone "iPhone" could not be restored. An unknown error occurred (1002) and now my p

  • Uploading a (custom size) long page.

    I am making a magazine for iPad. I currently have my pages set to iPad 3 size, but some of the articles have long free scrolling pages. All my pages upload correctly in Folio Builder apart from the long free scrolling pages with a custom length. It s

  • Problems activating / deactivating Tabstrips

    Hi people, I'm creating a dialog program that has a tabstrip with a set of 4 tabs, which (excepting the last one in the right side, which remains active permanently) must activate or deactivate given some conditions (values exist on internal tables).