Powershot Elph 110 canon camera black image screen when on,, no image

When I turn on camera there is only a black scree with the auto function on.  Even black with auto off. Snap a picture and still black screen.  Any help wil be  appreciated

Can you playback the images and see them on the screen ? Is the problem just with taking a picture or video ?
May sound like a silly question but I've done it before, is the lens cap on ?
Can you see the menus to do a Reset All just in case the camera's firmware has gotten hung up.
You can also try removing the battery and holding the power on switch on for at least 45 seconds too.

Similar Messages

  • Black splash screen when launching Logic Express 7.2.1

    hello, i recently installed final cut express hd (universal) and a recent pro app update. ever since then, i get a black splash screen when launching Logic Express 7.2.1. i've tried reinstalling logic, but nothing changes. how do i uninstall the pro app update, will this fix the problem? should i uninstall final cut?
    thanks.

    Hi M,
    did you tryed this?
    http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html
    Best regards,
    Jorge

  • I cannot enlarge photos on Facebook, I only get a BLACK, BLANK screen when I click on them-someone suggested it might be "Screen Resolution Setting"? I've already uploaded new firefox version. Please help!

    I am not able to ENLARGE photos on Facebook, this means photos that friends post on News Feed & photos that I post in my FB photo albums. I only get a BLANK, BLACK screen when I click on individual photos. A friend suggested that I upload the New Firefox, and I did this today, but it did not resolve problem. Friend also suggested that it could be "Screen Resolution Setting"?? OR "Data Rate" too slow?? I do not know how to check these features? Please help! If it could be something else, please let me know. Thank you for your time & help!

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    You can use these steps to check if images are blocked:
    * Open the web page that has the images missing in a browser tab.
    * Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    * Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    * Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    * Select the first image link and scroll down through the list with the Down arrow key.
    * If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    See also:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load

  • My iBook G4 only goes to a black 'Darwin' screen when it boots up. How do I get it to boot up normally again?

    Last night, my iBook G4 started showing odd glitches on the screen. When I restarted it, there was a file with a blinking question mark, so I consulted the manual and it said to shut down, hold 'Option' and turn on the computer, then click the hard disk icon and then the rightward arrow. When I did these things, it led me to a black screen where something called 'Darwin' asked me for my login and password. I managed to restart from the OSX install disc and repair the hard disk volume that way, but the black 'Darwin' screen shows up every time I turn the laptop on! What should I do to get it back to normal? My iBook G4 has OSX 4.11 installed, and I bought it refurbished in June 2005.

    Thank you so much for replying; unfortunately, my screen had already gone gray by the time I read your reply and I had to take in to the Genius Bar. My laptop's up and running, but the main problem is still unknown and I'll have to buy a new one soon. Thanks again!

  • Why does my iPhone 5c go to black apple screen when I unlock it?

    When using my messaging, if my phone locks when I unlock it, it goes directly to the black apple screen that usually appears when turning my phone on. Then it will eventually go back to my messages. Does anyone know why it's doing this and how to fix it?

    Hi MrsBarnett10,
    If you are having an issue with your iPhone not unlocking normally while using Messages,   you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    iOS: Force an app to close
    Next, I would try restarting the iPhone -
    Turn your iOS device off and on (restart) and reset
    If the issue is still present, you may want to restore the iPhone as a new device -
    iOS: How to back up your data and set up your device as a new device
    Thanks for using Apple Support Communities.
    Best,
    Brett L  

  • Black/blank Screen when connected remotely

    Zenworks 10.3.3
    I've only come across one other post on this forum concerning this issue. Sometimes when we're remotely connecting to an XP workstation all that appears is a black/blank screen. The management and remote machines are MS Win XP Pro SP3, pretty well up to date with security patches and all. On the remote computer, the screen saver at logon is disabled, desktop screen saver is disabled, the NIC is allowed to bring the device out of standby, standby is enabled and hibernation is disabled. If you send it the reboot command, more often then not, you can catch it back at the login screen and go about your business.
    Might Zen 11sp1 fix this?

    Is anyone at the Device to see what state it is in when this happens?
    On 10/28/2011 12:46 PM, elphantasmo wrote:
    >
    > Zenworks 10.3.3
    >
    > I've only come across one other post on this forum concerning this
    > issue. Sometimes when we're remotely connecting to an XP workstation
    > all that appears is a black/blank screen. The management and remote
    > machines are MS Win XP Pro SP3, pretty well up to date with security
    > patches and all. On the remote computer, the screen saver at logon is
    > -disabled-, desktop screen saver is -disabled-, the NIC is -allowed- to
    > bring the device out of standby, standby is -enabled- and hibernation is
    > -disabled-. If you send it the reboot command, more often then not, you
    > can catch it back at the login screen and go about your business.
    >
    > Might Zen 11sp1 fix this?
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • Doesnt boot Black/Blank screen when a cd-rom is connected - MSI x58 Platinum

    i7 920
    MSI x58 Platinum *latest bios, updated it after experiencing this issue*
    Corsair 3x2gb TR3X6G1600C8
    OCZ OCZ700MXSP 700W SLI/CrossFire Active PFC
    geforce 280gtx
    Windows 7 64bit
    This is a build working perfectly for over a year.. well one day my mom turned off the computer when I got home it wouldn't boot I disconnected/reseated everything and was able to figure out if I didn't have my dvd drive hooked up it will boot perfectly fine. I should note that the drive shows up fine in the bios and that with a pata hard drive it will load windows fine.
    I've tried 2 pata drives and 1 sata drive all working/tested in other machines .. and it stops at the same exact spot every time right after the bios and before the Windows logo would normally pop up it will just sit on a black/blank screen forever. I have never heard of a issue like this where it wasnt the ide channel going bad or the drive itself but since a harddrive on the ide channel works i assume its good.
    I didnt know if i should post this in the windows 7 64bit forum or this but im leaning towards motherboard as the issue because it still freezes at same exact spot even with no hard drives connected , so I couldnt boot anything from the dvd-drive. I'm also thinking its the mobo because i had it repaired a year ago, see my old thread here
    https://forum-en.msi.com/index.php?topic=127312.msg958264#msg958264
    Any idea's or suggestion please let me know.

    A PSU acting up can cause some strange things to happen. Have you confirmed that the DVD drive is working correctly?
    Quote
    I couldnt boot anything from the dvd-drive.
    Is the DVD drive enabled in the boot sequence?

  • My images from my canon camera are to warm when viewed in LR4

    When I load my images into light room 4 the color is not correct. However the color is correct when they are viewed using the Canon software, Tiffen DFX and other programs. My monitor is calibated using Huey Pro. I use a Canon 7D and shoot RAW exclusively.

    Could be a calibration or profile or an expectation issue, or even a bug.
    Are your Huey profiles ICC4 or something less?  LR has had issues with ICC4 profiles.  Are you using a wide-gamut monitor?  Are you using dual monitors of different models and  calibrations?
    Have you tried all the camera-match profiles in the Camera Calibration area?  Adobe-rendering will never be exactly the same as Canon-rendering but the profiles with the Camera prefix attempt to match the Canon rendering insomuch as a profile can do this.
    Does the warmth issue happen for tungsten and daylight/flash lighting or more just one of those?
    Are you using a custom-WB measured by the camera and using As Shot in LR or something else?
    Can you give us a side-by-side screen-shot that shows the LR and the DPP version, and perhaps provide a sample raw file and DPP-rendered JPG for download using www.dropbox.com or the like?

  • Canon camera and image gateway

    I have a Powershot A530. I have installed the software which seems good enough. But I am unable to access Image Gateway because apparently I do not have correct Mime plugin (?) application/x-canon-login
    What so I need to do to get this from somewhere?
    Given that apple supports my camera (& lots of other canon models) it would be reasonable to be able to access image gateway.
    Sorry if this is a basic question - I don't know where to start.
    Thanks
    Kate

    Thanks for this
    I've tried it and got lots of publicity stuff and downloads for manuals etc and virtually everything except what I am looking for.
    Anyway, good idea, so I just will be persistent and try and find what I think I need.
    Cheers Terence
    Kate

  • Black out screen when editing

    Has anyone had problems where the screen blacks out and directs me to my iPads app menu? This happens whenever I try to edit a document , highlight , or even flip pages. I've tried to restore my purchases, I have all my programs updated... I am confused

    Hi, thanks for the reply. Yes I'm using adobe reader. I subscribed to the
    covert PDF to word doc and it was working fine then a week or so later it
    just blacks out and shuts itself off completely. It happens as soon as I
    select a word , then drag the blue dots to choose a sentence to make note
    of, it won't even let me finish selecting the sentence before it shuts off.
    Hopefully there is a way to get it back to the way it was

  • Nokia 700 black/unresponsive screen when making ca...

    Screen goes black/unresponsive as soon as call is dialed. No possibility therefore of activating loudspeaker, etc. Just got phone today. Disappointing. Common issue with 700? Other threads with this issue in other models but haven't seen it posted for 700.
    Solved!
    Go to Solution.

    Thank you for the suggestions, but no screen protector has been applied. The sensors are not blocked. Problem was apparent with first call right out of the box. Noticed another post about this as well as same issue with N8 and other handsets.
    Screen goes black immediately upon pressing "send" when making a call. Phone does not have to be anywhere near the face. Calls can be completed holding handset to ear but screen is not accessible to activate loudspeaker or perform any other multitasking until call is completed.
    Issue also occurs when an alarm or reminder goes off. Screen is black and inaccessible. Otherwise performs normally.
    Updated software via Nokia Suite to version 111.030.0609 but issue persists. Will have to send brand new handset in for repair by Nokia, it appears.

  • I get a black capture screen (preview), but video captures fine.  What gives?

    I get a black capture screen when capturing with CS6 on a Windows 7 machine.  I'm capturing through Firewire from DV tape, via the VCR function of a Canon XL2 camera.  I have tried restarting, etc.; also toggled the "preview video" radio from the Settings button in the capture Window.  Nothing works and I need to be able to preview my video as I'm capturing.  It is not good enough that the video actually captures fine.  Also, I am forced to turn off Device Control in order to capture because it kicks me out of every capture (an immediate message of : "no frames captured") unless I do.  Please help.

    I'm not familiar with the process of rolling back to a previous update and I assume that is what you are suggesting?  It looks like I'm running 6.05.  Are you suggesting I roll all the way back to 6.00 past 6.04. 6.03, etc? And if I do roll back, does that mean I have to completely uninstall and reinstall CS6 first?  That would be a royal pain. 
    A little more updated info:  It's not just in attempting to capture from a DV tape that I get the black capture screen, but the live firewire signal is also black, though again it actaully captures just fine, I just cannot monitor the screen while doing it. 
    And it's definitely not something physical, like a bad firewire cable, because I also have the old 2.0 version of Premiere installed on the same machine so I tried an experiment:   I open CS6, then open the capture screen (which of course remains black).  So I close CS6 and open 2.0 and then open the capture window.  It too is black.  But if I restart my machine and open 2.0 without first opening CS6, and then open the capture window, the display is just fine.  So obviosuly some service from CS6 is remaining open when I close it and thus affecting 2.0.
    This problem is really starting to irritate me.

  • Installed my new canon camera n trashed my old canon software but when i connected camera its telling me that connection software for another canon is running n software can't be launched

    Installed a canon A3400IS camera to my OS X Yosemite computer n trashed my old canon camera software but the when i connect the camera its telling me that the connection software for another canon is running and that the software cannot be launched

    Take a look at the specs of your camera:
    http://shop.usa.canon.com/shop/en/catalog/cameras/powershot-camera-specials/powe rshot-sx500-is
    First, get yourself a decent brand (I have Verbatim and Sandisk) absolute minimum 4 GB, better 8 or 16 GB SDHC card, class 6 or higher (that number is in a little circle on the front of the card and means it can handle faster read/write speeds).
    Presumably, you are shooting in 1280 HD which will result in MUCH bigger file sizes. My camera does both 1280 HD as well as 1920 HD and in the latter, a 3 minute video easily uses up to 3 GB.
    Once you get a larger capacity card, you will be able to shoot up to 20 - 30 minute videos (depending on the card capacity - they have maximums). When I shoot video, I only use 16 and 32 GB cards. You might also call Canon and ask them two questions (or email their support, they're pretty good at answering):
    1. What is the maximum card capacity the SX500 can handle (cards can go to 32, 64, 128 GB)?
    2. What is the highest class number the camera can handle? (I said to get at least class 6; many more now come in class 10, and then there is a brand new version called UHS-1). If you get a card that is too fast, it will result in lower quality videos/pics. When I got my SX40, I called Canon and got their recommendations on cards because I was not happy with the quality output of the cards I had.
    And, lastly, make sure that, if you are using a card reader, it is fast enough to read whatever card class you will be using - that is important as that determines how long it takes it transfer the stuff to the computer. Also, I'd suggest using a USB card reader rather than attaching the camera - it makes it so much easier to handle and saves the camera battery.
    Start with these suggestions and you'll find that you'll be happy with the output of your camera.

  • I just had my hard drive replaced, and now when I am online get a black screen when trying to open a pdf. Any help would be appricated

    I'm getting a black/blank screen when trying to open a Pdf. off the internet. Can some one please tell me what to do to fix this? I just had my hard drive replaced and never had this problem before. Thank you

    try downloading adobe acrobat reader and installing it......

  • Apple TV blurry black screen when streaming from iMac?

    My Apple TV shows a black blurry screen when trying to stream from my 2013 iMac.  ATV works perfectly with iPad/iPhone but not iMac.  Audio from iMac is fine, just no video.  Both products are entirely up to date as far as software goes and restarting both + wifi hasn't achieved any results.  Any **** would be appreciated, thanks.

    I've found out it is an Mavericks 10.9.2 and 10.9.3 failure! Online I have found more people with the very same Problem, and all of them are running 10.9.2/3  - ON THEIR IMACS (different Models)!
    My Apple TV and Streaming Services were functioning just fine 2-3 Monts ago, the only thing that changed was Updating my iMac Mid 2011 to 10.9.2 -> Then i've got the black screen when streaming, could not activate DisplayMirroring, when i played something in itunes or VLC the sound went through AppleTV but no video.
    Then have checked it with iPad 2 = OK, iPhone 5 = OK, MBP Early 2008 with SnowLeopard = OK,
    so i decided to Install an 10.9 on an external drive - and guess what? It works! Tried to Update (ComboUpdate) to 10.9.1 and it was still OK, got the BLACK SCREEN after ComboUpdate 10.9.2, and tried to Install 10.9.3 just to see if it will solve the problem -> NOT
    this must be a joke!

Maybe you are looking for