PowerShot SX1 IS NOT focus clearly.

Why does the PowerShot SX1 IS tend to NOT focus clearly when zooming and even at times when not zooming? I recieved the camera new,about five years ago, as a gift and it did this right from the start. What can i do to correct this problem and why does it not focus--sometimes it does but majority of times it does not. It tend to be slight ly put of focus most of the times.
Judy

Steve,
Thanks for your help. You are correct that there is another file with the same name without the ".THM" extension.
What I said was incorrect. I was trying to import the file without the ".THM" extension and getting the afore mentioned message.
However, I just discovered that this MVI_ file is a "Quick Time Movie" format not an "avi" format.
Do I need to convert this format or does it have something to do with a codec?
Thanks,
John

Similar Messages

Canon Powershot SX1

Hi!
I'd like to know if the Canon Powershot SX1 RAW format will be supported in ACR 5.4. At the moment, the SX1 is not listed among the supported cameras (Camera Raw 5.4 plug-in release candidate).
I'd pretty much like the update to support the SX1 because I hate using Canon's software for RAW conversion (not flexible, slow, etc.).
Cheers,
Aline

See on DPReview http://forums.dpreview.com/forums/read.asp?forum=1000&message=31937565

RAW support for Canon PowerShot SX1

Hi All,
In the absence of Apple support for the Powershot SX1 IS any suggestions on how to work with this camera easily in a workflow shooting RAW?
I have seen a few archived posts with some suggestions such as the Adobe DNG converter but unfortunately the camera is not supported by the converter (just Photoshop CS and Elements).
Would LOVE to get some apple support here but at the moment I am going to have to find a workaround or go the Adobe application path...
Thanks in Advance.

Adobe converter works fine if you haven't adjusted the file.
I was using LR2 and DNG files and anything that has been cropped or adjusted won't show in aperture 3 even after going through the converter.
The only way it worked way to open it in Photoshop and change it to a photoshop file. Then Aperture 3 recognizes it.
I wish apple would just add the SX1 IS to it's raw support.

My new Nokia E 5 does not focus well, HELP!

Hey all I have bought Nokia E5 just couple of weeks ago. Camera does not focus well and the pictures are not clear. 3.2 MP Camera of my nokia N93 was alot better than its(E5) 5 Mega Pixel. Nokia should sort this out, they should have checked it before introducing in the market. I want NOKIA to sort this out OR REPLACEMENT!!!!! Can any one help me with this?

I don't own an E5, but assume you know its camera uses a different focusing technology than most other Nokia phones, EDoF (Extended Depth of Field)? Before deciding your camera is faulty, please read about how it was designed to work: http://www.allaboutsymbian.com/features/item/Camera_Nitty_Gritty_Supplemental-EDoF.php . Hope that helps.

Canon Powershot SX1 IS

So far I love Aperture 3 but it is a pain that there is still no RAW supper for the Canon Powershot SX1 IS. Will Apple ever add it. It's been out a while now. My wife's 500d has been added and it is newer than the SX1.
Come on Apple please.

Tulisuudelma wrote:
I'm sure Adobe can tell me if they even put it on todo list of some ACR release, perhaps 5.5?
Adobe has a policy of not commenting on unreleased software. Members of the ACR team may give you a hint, but not a definite answer.
If you think about it, it wouldn't make a bit of difference to you.
Tulisuudelma wrote:
…since I'm moaning at these forums. I know support will come one day, but perhaps bit sooner if people actually tell Adobe that there's a problem.
Quite the opposite: the ACR team has publicly stated here that posts like yours actually delay the support for your camera by virtue of the time wasted by them reading your "moaning posts".

How do you import "MVI_ file # .THM" from "Canon Powershot SX1 IS" into Adobe Premiere Elements

When I tried to import a MVI_ "file #" .THM file from a "Canon Powershot SX1 IS" camera into Adobe Premiere Elements, I received the following message: "This type of file is not supported, or the required codec is not installed."
How do I resolve this issue?
Thanks for any assistance that you can provide.
John

Steve,
Thanks for your help. You are correct that there is another file with the same name without the ".THM" extension.
What I said was incorrect. I was trying to import the file without the ".THM" extension and getting the afore mentioned message.
However, I just discovered that this MVI_ file is a "Quick Time Movie" format not an "avi" format.
Do I need to convert this format or does it have something to do with a codec?
Thanks,
John

GR/IR not auto clear in system

Hi All,
GR/IR not auto clear in system
Normally every week end the system automatically clears the open items in f.13, But this time it has not clear the open items
What could be the reason the system not to clear open items on the week end.
So that's the reason the user manually cleared the open items
- User has performed F.13 on 26th of Oct but system didn't auto clear the open items.
- Those documents are posted prior to 26th of Oct and user would like to know what cause to incident.
Please suggest me what should be the reason to come out of this issue.
Thanks in advance
nandha
Edited by: nandhasapfi on Nov 8, 2011 1:07 PM

Hi All,
I trying to auto clear fbl3n open items in f.13, every week end the system defaultly auto clears all the open items in the system but last weekend it has not been done that job.
Suggest me what should be the reason for the above issue.
And i checked in OB74 for the G/L a/c 123456 they have configured the below thing
chart of account ABC
a/c type S
criteria 1 zuonr assignment
criteria 2 vbund Trading partner
criteria 3 ebeln   purchasing document
criteria 4 ebelp   item
criteria 5 empty
Suggest me Still any thing required to configure for auto clear the open items of fbl3n
Thanks in advance
Edited by: nandhasapfi on Nov 10, 2011 11:45 AM

Why HDV capture in FCP 6.0,3 is not as clear as original footage?

I have tried several capture's settings for HDV footage captured in Sony HDR-HC7. Once it is in my computer's hard disk and ready to strt editing it seems that the video is not very clear mainly the edges of moving objetcs look if they were a liitle bit "dreagged". I ve been told in the Final Cut Training course that the defect is only possible to be corrected in Color program . It fact it is reduced a little when the filter "Film Look" is applied but it does not look as good as the original footage. Is there something I should need to do?. Thanks

#2 Blurry Playback
Shane's Stock Answer #2: Blurry playback
ONLY JUDGE THE QUALITY OF YOUR MATERIAL ON AN EXTERNAL BROADCAST MONITOR, OR AT LEAST A TV.
The Canvas shows you what happens after the codec you are working with has been applied. The Viewer shows you the material in its native format. Once you drop the footage from the Viewer into the timeline, it inherits the attributes of the sequence. If it is a DV sequence, the footage will render out as DV.
1. Disable overlays on the Canvas.
2. Make sure you've rendered everything (no green bars at the top of the timeline).
Video playback requires large amounts of data and many computations. In order to maintain frame rate and be viewable at a normal size, only about one-fourth of the DV data is used in displaying the movie to the screen. However, the DV footage is still at full quality, and is best viewed thru a TV or broadcast monitor routed thru your camera or deck.
NOW...seeing that you are working with HDV, the only way you are going to be able to see the actual quality of what you have, you will need an HD capture card and HD monitor. Matrox MXO plus Apple Cinema Display is a cheap way to go, works with laptops. Or if you have a MacPro, then the Decklink Intensity and HDTV would be a good inexpensive choice. other than that...www.aja.com www.decklink.com
Shane
Shane

Bursting - empty tag not being cleared in email channel loop

If you check the following, I pass the cust num and email address to the email delivery channel for the subject line.
<xapi:message id="222" to="[email protected]" attachment="true" subject="Unigas Statement to be emailed to ${CUST_NUM} to ${EMAIL}">
Problem is, that if the cust num or email address tag is empty, the previous tag value is used! its like its not being "cleared" between bursting loops.
Using 5.6.3 EBS.
Rob
http://www.scnet.com.au

Since your email is failing I am going to assume the rest of your script is working. So I am looking specifically at these lines:
$process = '../includes/process_mail.inc.php';
if (file_exists($process) && is_readable($process)) {
include($process);
The things that need to be confirmed here are that the path is right and it has proper permissions. Have you tried eliminating that "and" statement in your "if" and see if those work independently. I have a feeling that if the path is right that the file does not have the proper permissions on your server for global read access which would make, "is_readable" fail and thus end your script.
Can you test those and post back?

Open Item not getting Cleared automatically

Dear Sir,
For a GL "Cenvat Clearing" , we have ticked the option "open Item Management" in FS00 .
Our business scenario is as below :
After MIGO , we do excise posting using J1IEX and here in the posted Fi document the GL "Cenvat Clearing" gets Credited . Subsequently during the MIRO this GL i.e "Cenvat Claering" gets Debited .
My problem is that when I see in FBL3n for this GL the relevant transaction still appear under the open Items . Pl guide me , as what is the reason for this entry not getting cleared automatically .
Regards
B Mittal
Regar

PO number cannot be taken as sort feild hence the value is in blank always.
You need to identify some value for this feild and as a process you need to tell your users to incorporate the same at the time of doing MIRO.
Or other wise you can take out the assignment of sort key to this GL account, and as a process you can instruct your user to use reference feild and input a value. If you fell that this is a tedious process,
the Identify another feild that is common for both debit and credit line items and try to post with a common valuie using, one ABAP program which will update this feild. Mind that this feild need to be in the OB74.
reward if useful
sarma

Document not auto cleared after performing FF67

Hi all,
firstly i would like to acknowledge that i'm using version 4.7.
after performing FF67, bank recon document generated in main bank & clearing bank GL accounts. But it is not auto clear in the clearing bank GL account. the treatment is as post GL account & manual clear.
after checking:-
1. trans type ABC using int. algorithm 15 - use assignment field to clear.
2. posting type in posting rule is 4 - clear debit GL account
in FF67 screen variant, assignment field entered the same as assignment value in clearing bank account. by right, the documents will clear off automatically.
anyone can assist what else that i miss out?
thanks in advance.

hi..
we can perform manual clearing or F.13, but the pupose of having such posting rule and posting type is to minimize steps of clearing.
by right, once ff67 posted, the clearing bank gl account will get cleared.

Payment Document not getting Cleared

Hi Experts,
I have created a document type for incoming payments and used the same for Clearing Sales Invoices. Now i am not able to reverse the same using FBRA and FB08 as well
In FBRA i get the following error message
Document xxxxxxxxxxx xx 2011 is not a clearing document
In FB08 i get the following error message
Document includes already cleared items - reversal not possible
Please advice

Athaus,
Could you tell me how you cleared the BRS clearing and then the document it cleared (ie. transactions and fields)?
Thanks, Cara

GR/IR clearing account not having cleared document

Hi Friends,
In FBL3N, Against GR/IR (160224) clearing account, is it mandatory to have clearing document against each line items.
MIGO and MIRO done.
client is asking for some line items it's showing cleared doc, for some line items's it's not updated clearing document.
Regards,
suresh

If an item is "Open", it implies that some attention or some action from business is pending. If you are not clearing any items then how can you analyse the GR/IR account ?
Over a period of time line items for Gr/IR gets accumulated and business cannot go and review all items which may run into thousands. If you are doing clearing regularly, User can review only open items and take appropriate action.

GR/IR Clearing a/c not getting cleared..

Dear All,
My GR/IR clearing account is not getting cleared automatically after Invoice posting..is it the standard behavior or anything
missing?
For example- GR/IR Clearing a/c is 13110100,when GRN is done it is getting credited and once invoice is posted it gets
debited so it should show cleared when we run FS10N / FBL3N
please let me know whether it is needed to clear manually?
Naren

Hi
F.13 is for executing the setting configured under Financial Accounting -> General Ledger Account -> Business Transactions ->Open item clearing - > Prepare Automatic clearing. In this place, the GL account needs to be updated with the relevant criteria like, what are the fields to be matched for clearing like Reference field, assignment, etc.
After that, if F.13 is executed for this GL account then it will clear based on the criteria specified above.
Hope it clarifies
Regards
Lakshmanan Krishnan

How to get rid of "Delivery costs have not been cleared" status = MM_EKKO

Hi dear experts,
During pretreatment of MM_EKKO archiving object (TA: SARA), I get an amazing huge amount of PO position which can not be archived due to "*Delivery costs have not been cleared*".
I tried several ways to find out how to solve this issue but without any success.
Point is that we do not clear delivery cost regarding those PO positions, but delivery cost are transfered directly to a global account.
It means that those PO's won't never be cleared.
Any ideas about how I can fix this issue?
Best regards,
Daniel

Yep,
no idea why, but when I uncheck the "Final Invoice" box save and went back into the same PO and check again the same "Final Invoice" box, then, as a miracle, SARA=>MM_EKKO=> Pretreatment knows that this document is cleared and can be archived.
It is just that for now, really old PO's are located in the present residence time
I hope this slyness will help someone else one day.
Regards,
Daniel
Edited by: Daniel Putzschler on Jul 28, 2009 2:02 PM

PowerShot SX1 IS NOT focus clearly.

Similar Messages

Maybe you are looking for