Powertool convertTo-UcsCmdlet returns error message
Hi
our customer is getting an error message when he tries to start the convertto-ucscmdlet.
he has installed the actual powertool version 1.0.0.0 on two systems and both getting the same message.
There is no difference if he is connected or not to an UCS system.
i searched for the logfile directory from the UCSM but wasn't successfull.
Here the message:
C:\> disconnect-ucs
C:\> ConvertTo-UcsCmdlet -verbose
WARNING: Please review the generated cmdlets before deployment.
ConvertTo-UcsCmdlet : Could not find the log files directory
At line:1 char:20
+ ConvertTo-UcsCmdlet <<<< -verbose
+ CategoryInfo : NotSpecified: (:) [ConvertTo-UcsCmdlet], Exception
+ FullyQualifiedErrorId : Cisco.Ucs.Cmdlets.ConvertToUcsCmdlet
C:\> ConvertTo-UcsCmdlet
WARNING: Please review the generated cmdlets before deployment.
ConvertTo-UcsCmdlet : Could not find the log files directory
At line:1 char:20
+ ConvertTo-UcsCmdlet <<<<
+ CategoryInfo : NotSpecified: (:) [ConvertTo-UcsCmdlet], Exception
+ FullyQualifiedErrorId : Cisco.Ucs.Cmdlets.ConvertToUcsCmdlet
C:\>
thx Alois
Hi,
I am also running into the same problem. As far as I can see the problem is related to Java, as I am experiencing the same issue on both Windows 7, as well as on Mac OS X. I am running Java 7 update 45 on both systems and neither is generating log messages in the .ucsm directory.
I have older log files in the .ucsm directories on both systems, so I know that on some previous java version UCSM has created log entries as it should. However, if I start UCSM on these systems now, no logs are created and hence the "ConvertTo-UcsCmdlet" powershell cmdlet does not work, because it depends on these logs.
The fact that I have older entries in the .ucsm log directory and the fact that the problem appears on two different operating systems to me indicates that this is a Java and/or UCSM problem that was introduced during some java upgrade.
Another thing that I noticed is the following: When I enable logging for java itself I see the following entries in the java log file:
cat *.log | grep ucsm
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/centrale-min.jar
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/centrale-min.jar
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/centrale-min.jar
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/centrale-min.jar
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/centrale-min.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/centrale-min.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/cres.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/foxtrot-core-3.0.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/swingx-1.0.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/swing-worker.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/TimingFramework-1.0.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/OfficeLnFs_2.7.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/prefuse.2007.10.21.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/log4j-1.2.15.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/log4j-1.2.15.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/Stub.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/jgraph.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/jna.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/examples.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/jfreechart-1.0.9.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/jcommon-1.0.12.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/miglayout-3.6-swing.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/jxlayer.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/JBusyComponent.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/jautocomp.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/lablib-checkboxtree-3.2.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/osx.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/osx2.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/TimingFramework-1.0.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/swingx-1.0.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/osx2.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/foxtrot-core-3.0.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/prefuse.2007.10.21.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/JBusyComponent.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/lablib-checkboxtree-3.2.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/miglayout-3.6-swing.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/examples.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/jna.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/swing-worker.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/Stub.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/jgraph.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/jxlayer.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/jautocomp.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/OfficeLnFs_2.7.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/jfreechart-1.0.9.jar.pack.gz
Missing Application-Name: manifest attribute for: http://192.168.218.147/ucsm/signed/jcommon-1.0.12.jar.pack.gz
I am hoping some of the developers out here can pick up a clue from this as I am stuck at this point. The only available course of action would be to downgrade Java, and see if that fixes the problem, but unfortunately I can't do that on these systems because of other Java applications that I need to run.
Similar Messages
-
After upgrading to Lion the bookmarks in Preview returns error message.
After upgrading to Lion the bookmarks in Preview returns error message : The File "****" couldn't be opened because you don't have permission to view it. To change the perimssion, select the item in finder and Choose File info. I have bookmarked plenty of files in Preview. How to overcome this error message???
Doesn't work Steve. I think it is an issue with Preview being sandboxed (check the sandbox column in Activity Monitor: Preview = Yes). Sandboxed apps restrict file access to those the user has explicitly selected. My theory is that this causes the unfortunate side effect of bookmarked or linked PDFs not working. A simple test: open a file with bookmarks, manually open the bookmarked file and then select the bookmark in the first file - it should open with no complaints about permissions (which leads to a weak workaround: open all the PDFs you intend to work with!).
-
AuditActivityReport returned error message
Hi!
i'd like to get Audit Activity Report, but return error message "An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'ActivityData'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors "
this problem in BPC 5.1 MS, SQL 2003
thanks
Araithanks
i solved this problem. mistake was in string connection for OsoftDataAudit -
Returning error messages to shell with TERMOUT OFF
Hi all,
I did a search in this forum and I couldn't find the answer.
I am unloading (spooling) a table using SQLPLUS. Since I don't want to display these records on screen I am using set termout off.
But I want to see error messages on the screen. I used whenever sql error exit sql.sqlcode. It is displaying the error messages in the spool file. But I would like to have these on screen so that I can capture all my errors in to a log file.
Thanks in advance,
NarenThere is no setting in SQL*Plus to separate
errors from other text.
There is a general risk using sql.sqlcode.
The OS may not be able to cope with large numbers,
the returned value may be modulus the maxium
return code allowed. The risk is that the final
value may be the same as a successful return value.
For safety I exit with FAILURE and then
check the output file for the exact error.
-- CJ -
Returning error messages to sheel with termout off
Hi,
I did a search in this forum and I couldn't find the answer.
I am unloading (spooling) a table using sqlplus. Since I don't want to display these records on screen I am using set termout off.
But I want to see error messages on the screen. I used whenever sql error exit sql.sqlcode. It is displaying the error messages in the spool file. But I would like to have these on screen so that I can capture all my errors in to a log file.
Thanks in advance,
NarenThere is no setting in SQL*Plus to separate
errors from other text.
There is a general risk using sql.sqlcode.
The OS may not be able to cope with large numbers,
the returned value may be modulus the maxium
return code allowed. The risk is that the final
value may be the same as a successful return value.
For safety I exit with FAILURE and then
check the output file for the exact error.
-- CJ -
How to get the returned error messages in the Try/Catch block in DS 3.0?
A customer sent me the following questions when he tried to implement custom error handling in DS 3.0. I could only find the function "smtp_to" can return the last few lines of trace or error log file but this is not what he wants. Does anyone know the answers? Thanks!
I am trying to implement the Try/Catch for error handling, but I have
hard time to get the return the msg from DI, so I can write it to out
custom log table.
Can you tell me or point me to sample code that can do this, also, can
you tell me which tables capture these info if I want to query it from
DI system tablesHi Larry,
In Data Services XI 3.1 (GAd yesterday) we made several enhancements for our Try/Catch blocks. One of them is the additional of functions to get details on the error that was catched :
- error_message() Returns the error message of the caught exception
- error_number() Returns the error number of the caught exception
- error_timestamp() Returns the timestamp of the caught exception.
- error_context() Returns the context of the caught exception. For example, "|Session Datapreview_job|Dataflow debug_DataFlow|Transform Debug"
In previous versions, the only thing you could do was in the mail_to function specify the number of lines you want to include from the error_log, which would send the error_log details in the body of the mail.
Thanks,
Ben. -
Ping iTunes server returns error message
Help!! I have tried to ping the server following the instructions on the Tech Specs page (http://www.apple.com/itunes/podcasts/techspecs.html), but whenever I put the URL w/podcast id into my browser, I simply get an error message back from Apple and the XML file is not updated immediately.
Here's the URL I used:
https://phobos.apple.com/WebObjects/MZFinance.woa/wa/pingPodcast?id=108627247 where the id is my podcast (Harpeth Hall LIbrary). Am I missing something?
Here's the error message:
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
An invalid character was found in text content. Error processing resource 'https://phobos.apple.com/WebObjects/MZFinance.wo...scoutwert
The call was intended to be basically a one-way notification. No real return value per se other than the http 200 success header if your message is received. Having said that, it's certainly pretty gross looking if you ping in a browser. A bug has been filed against this behavior so that in the future you can get a more friendly assurance in a web browser that your ping went through. In the meantime you might consider just pinging on the command line like this:
curl -I https://phobos.apple.com/WebObjects/MZFinance.woa/wa/pingPodcast?id=108627247
If it was received by the iTMS server, you'll see:
HTTP/1.1 200 OK
in the output. That 200 means the ping was received not that it has run yet.
d -
CALL Transaction 'MIRO' return error messages in MESSTAB
Dear All,
We have created a test function module to call transaction 'MIRO', the function works fine on one server but the same give error messages on other server.
The messages returned by call transaction is as follows
======================================================
Messages retunrned by 'CALL Transaction MIRO' as on server I (success)
======================================================
1 MIRO SAPLMR1M 6000 I E F5 096 1,002,010.00 INR Advance to Vendors CTU
2 MIRO SAPLMR1M 6000 S E F5A 034 BusA CTU
3 MIRO SAPLMR1M 6000 S E M8 060 5200000423 CTU
======================================================
Messages retunrned by 'CALL Transaction MIRO' as on server II (error)
======================================================
1 MIRO SAPLMR1M 6000 S E F5 480 RE Doc. Header Text CTU
2 MIRO SAPLMR1M 6000 I E M8 584 CTU
3 MIRO SAPLMR1M 6000 S E F5 480 RE Doc. Header Text CTU
4 MIRO SAPLMR1M 6000 S E 7Q 333 1008473 CTU
5 MIRO SAPLMR1M 6000 E E F5 480 RE Doc. Header Text CTU
In fact, when the MIRO screen is displayed to user and user enter the data in MIRO and simulate, there is no error.
But when we post the transaction the screen is exited without displaying the invoice document number.
Where as if we call MIRO directly, it works fine without any error.
Kindly help.
Regards
Ruhi HiraThe sample code is
FUNCTION Z_TEST_MIRO.
""Local Interface:
*" EXPORTING
*" REFERENCE(ERRCODE) TYPE N
*" REFERENCE(INVOICENUMBER) TYPE C
*" REFERENCE(OLDINVOICENUMBER) TYPE C
DATA: BEGIN OF tran_opts,
dismode TYPE ctu_params-dismode VALUE 'A',
updmode TYPE ctu_params-updmode VALUE 'S',
cattmode TYPE ctu_params-cattmode,
defsize TYPE ctu_params-defsize ,
racommit TYPE ctu_params-racommit,
nobinpt TYPE ctu_params-nobinpt VALUE 'X',
nobiend TYPE ctu_params-nobiend,
END OF tran_opts.
DATA: BEGIN OF MESSTAB OCCURS 10.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSTAB.
ERRCODE = 0.
GET PARAMETER ID 'RBN' FIELD OldInvoiceNumber.
DATA BEGIN OF BDCDATA OCCURS 1.
INCLUDE STRUCTURE BDCDATA.
DATA END OF BDCDATA.
CALL TRANSACTION 'MIRO' USING BDCDATA OPTIONS FROM tran_opts MESSAGES INTO MESSTAB.
LOOP AT MESSTAB.
WRITE: / MESSTAB-TCODE,
MESSTAB-DYNAME,
MESSTAB-DYNUMB,
MESSTAB-MSGTYP,
MESSTAB-MSGSPRA,
MESSTAB-MSGID,
MESSTAB-MSGNR,
MESSTAB-msgv1,
MESSTAB-msgv2,
MESSTAB-msgv3,
MESSTAB-msgv4.
IF MESSTAB-MSGTYP = 'S' AND MESSTAB-msgid = 'M8' AND MESSTAB-msgnr = '060'.
invoicenumber = messtab-msgv1.
ENDIF.
ENDLOOP.
IF OldInvoiceNumber = InvoiceNumber OR InvoiceNumber IS INITIAL.
ERRCODE = 1.
ELSE.
ERRCODE = 0.
ENDIF.
REFRESH BDCDATA.
ENDFUNCTION. -
Getting a "Return" error message when compiling
I have the following code below that works when I don't use any methods.
When I insert the side method(), I always get an error message "missing return statement".
I can't figure out what I am doing wrong.
It runs fine as it is but I am trying to modify it by using separate methods (just to learn how to use and call methods).
I am trying to replace what I have in the main method in separate method called "side".
Here is the code
import javax.swing.*;
public class Round
private String output = "";
//message error occurs when this method is added;
public String side()
for (int row = 1; row <=5 ; row ++)
if (row == 1 || row == 5)
return output += " * * \n";
public static void main(String args[])
String output = "";
//the for loop (before the else) is copied into the side method.
for (int row = 1; row <=5 ; row ++)
if (row == 1 || row == 5)
output += " * * \n";
else
if (row == 2 || row ==4)
output += " * * \n";
else
output += "* *\n";
JOptionPane.showMessageDialog(null,output);
System.exit(0);
}Thanks for your help.I did as you suggested and still get the same results.
I also tried using on one return statement after the for loop but still got an error message.
Do you know how I can fix this?
thanks
public String side()
for (int row = 1; row <=5 ; row ++)
if (row == 1 || row == 5)
return output += " * * \n";
else
if (row == 2 || row ==4)
return output += " * * \n";
else
return output += "* *\n";
[\code] -
Hello,
I have been trying to fix this problem with no success for awhile. When I try and backup and sync my iPad Air iOS 7.1.1 iTunes keeps returning the error message
" iTunes cannot sync apps to the iPad because the apps installed on the iPad could not be determined" iTunes is current with all updates and is running on a MacBook Pro 8,3 running OS X 10.9.3.Hi RayCanada,
Welcome to the Support Communities! I'm not sure what steps you have taken so far to troubleshoot this issue, but I have a couple of suggestions for you to try. The first thing I would suggest is to quit all apps and sign out of the iTunes Store on your iPad, disconnect it from your Macbook Pro, and turn it off. Then restart your Macbook Pro.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT1311?viewlocale=en_US
Tap Settings > iTunes & App Stores.
Tap your Apple ID.
Tap Sign Out.
Turn your iPad Air on, and sign into your iTunes Store account using the same Apple ID you used to purchase the apps. Connect it to the MacBook Pro using the Apple USB cable that it came with. Try to sync again with your iTunes library on your Macbook Pro.
Alternatively, you can download any iTunes Store purchased content using the same Apple ID directly to your iPad. Here's how:
Download past purchases
http://support.apple.com/kb/HT2519
Not sure which Apple ID you used to make purchases? You can review your entire purchase history using your computer:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/ht2727
I hope this information helps ....
- Judy -
V8.16 returns error message upon opening database.
When opening a database using V8.16 support files and drivers the following error message is returned. "ODBC - Tunnel Error ORA-01456: may not perform insert/delete/update operation inside a READ ONLY transaction.
This error does not occur using V8.15.
What is the cause of this problem?You don't by any chance have the 'connect in read-only mode' option checked on your DSN do you?
Justin Cave -
How to validate and return error message
JDev 9.0.5.2 ADF UIX and Struts
Scenario:
I have a uix input page with 2 view objects (VO1-updates an entity object, VO2-sql viewobject, no entity).
I have a Save button and its event where I want to handle the validation check and then commit the data. I need to manually check the VO2 fields in java and if none of them are populated, I need to stay on the same page and return a message. If one of the fields is populated, I need to save the data in VO1 and insert the values in VO2 into a table using java.
I have been looking at the dataForwardAction class for the page but I am not sure if I should be overriding methods and which ones, as well as how to remain on the page if VO2 does not have at least 1 value populated with a message to the user.
Any help is greatly appreciated.Hmm, I believe while, ActionError.GLOBAL_ERROR is a static string variable, it is used to hold the value that identifies the global error properties. I know I add multiple errors to global errors. Regardless, instead of ActionErrors.GLOBAL_ERROR you can use your own property, such as "test". Then on your jsp page you can use this tag: <html:errors property="test"/> and it should pull the relevant action error information. The value "context.errors.password.bad" by the way refers to a value in your ApplicationResources.properties file or whatever message resource file you have designated in your struts config as default.
-
How to return error message using macro or others ways
Hi !
I need your help to find a technical solution.
We have an alv object with 2 parameters (a checkbox and a writable field which is for address mail.) When you push the button B1, the function module SX_INTERNET_ADDRESS_TO_NORMAL is called to verify the email address.
If I use the classic way to show the exceptions returned by the function module, the user can read the message but when he does an action on the program this dump. (The program has been killed.)
I am looking for a way to show the error message and the possibility to change the email address. I think that using a popup information would work but I do not find this way very nice. Can I use macro to have the message on the status? In positive case, could you explain me how to use it?
Thanks!check the context in which the message statement is running, [here in sap library - message processing|http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbaae335c111d1829f0000e829fbfe/frameset.htm], you will get the answer why!
-
(newbie) How to return error messages to JSP page.
Hello,
I'm using a very simple Model 1 architecture (no framework such as Struts used.) The webapp just consists of a login.jsp which collects database connection parameters and then activates a servlet to return a PDF report to the browser.
I have a very common need: I would like the errors entered by the user on the login.jsp to be displayed at the top of a new return of the login.jsp (with the bottom of the JSP still providing the edit fields for reentry), errors such as:
1.) User did not enter the username, password, and database name
2.) Having a wrong username/password for the given database.
(2) is more complex than (1), because it would involve feedback from the servlet (which makes the DB connection).
I'm not sure how to code this, however, with just JSP, JSTL and JavaBeans. Does anyone know of an example with source code on the web where something similar to this is done?
Thanks,
GlenNo problem on posting here. Seeing as JSP forum is not accessible, this is the next best choice.
What sort of complexity are you after here?
You can go with the very simple:
Print out the error messages as you discover them.
if (request.getParameter("username") == null){
// print out the message
out.println("Please enter your username");
// or alternatively
List errors = new ArrayList();
errors.add("Please enter your username");
}The best way to get feedback is to write your login method to return whether login succeeded or not. That can be a boolean true/false value, or you could return a User object to indicate success, and null to indicate failure.
How much of the code is in servlet, how much in JSP? -
ITunes on Windows Vista PC can't connect to AirPort Express. PC returns error message -15000
I'm running PC with Vista and newest update iTunes.
I have set up a network through my AirPort Express, and i am streaming music wirelessly from my PC to AirPort. This used to work, but now i get an error message saying that an error occured while connecting to the AirPort, with the error code -15000. What's wrong? this used to work earlier?
This is particularly annoying since it used to work, until the latest (or the one before that) iTunes update.
Need help!This is always a Windows firewall problem. Try opening UDP port 6002 in your firewall software.
Maybe you are looking for
-
Hi all, I am making a Zreport in PP for the client. In the report output there is one column named as "Actual finish date" which as the name suggests is the process order finished date for confirmation. For this I am using "GLTRIactual finish date" f
-
My Ipad 2 was to be reformatted and I lost all my apps I purchased from iTunes. Is there a way of getting these back
-
My phone is saying No SIM card installed, when I clearly have my SIM inserted?
My phone is saying No SIM card installed, when I clearly have my SIM inserted. I can't make or receive calls. What can I do to fix this?
-
Question about getSpaceContents and XSLT.
Hello everybody. Have some problems with understanding of working with getSpaceContents. I Have some *.xmls in ContentSpace and need put each of them into varaiable (to work with it in loop). How should I do it correct? The point of loop is :I have s
-
Add unidentified members to Essbase outline automatically on load
We are using FDM to map and import data files to Essbase. Due to the number of members in each Essbase dimension, and since all of the source members are identical to the target members, most of the FDM mappings are taken care of by single "like" map