POWL accessing data from multiple tables/objects
Hello,
I have a query on the POWL applications.
If the powl application has to access data from multiple tables/objects, then the solution would be creating a data structure of those tables/objects and referring to that structure in GET_OBJECT_DEF methods.
Is there any other soln? or I am right here?
The queries which are saved for a particular user are transportable? if not, how can they be made transportable?
Thanks & regards,
Ravish
you are right, you can do in get_objects method.
POWL_QUERIES are transportab;e, you can save them in POWL_QUERY transaction.
Best regards,
Rohit
http://wiki.sdn.sap.com/wiki/display/WDABAP/POWL
Similar Messages
-
JDBC-XI-FILE scenario. How to extract data from multiple tables
Hi,
At this moment I didn't have the access for XI system. So here I have some silly question. Could you please clarify the same ??
If I got to extract data from single table using JDBC adapter I can put the below query in communication channel
SELECT *FROM orders WHERE new='true'.
But if I got to extract data from multiple tables, logic to be used should be like as shown below. ( from previous thread------prabhu).
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
union
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
But my query is ........how to put the above entire code in one line. (i.e in Qery place of communication channel ) ??
Thanks
KumarHi Palnati,
You either use a select query with join or a stored procedure which will contain the logic to extract the data from multiple tables. But, the limitation in case of stored procedure is u can hv only one selct query in it.
You write ur actual query provided in the parameter 'Query SQL Statement". u can also wrt a stored procedure in it. Also, u can provide a update statement in it which will update a certain flag so tht u don selct the data again.
Check the following link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm</a>
Regards,
Akshay
Message was edited by:
Akshay Salunke -
Can a block in Oracle contain rows/data from multiple tables?
Hi during my discussion with one of the DBAs, a point came up i.e. A block shouldn't have rows from multiple tables...
Is that true? I read in one of the OTN thread (i don't exactly remember the thread name) that a block can have data from multiple tables. If it doesn't have, what's the table directory in block signifies?
Please share your views.
Thanks,
CSMCSM.DBA wrote:
Hi,
As per the above link,
Table directory
For a heap-organized table, this directory contains metadata about tables whose rows are stored in this block. Multiple tables can store rows in the same block. (Logical Storage Structures)
And by default Oracle creates heap organized tables only.(heap-organized table: A table in which the data rows are stored in no particular order on disk. By default, CREATE TABLE creates a heap-organized table.) (Glossary)
So I can say a block can contain rows from multiple tables. Isn't it?
CSM
See Logical Storage Structures
Given: A segment is a set of extents allocated for a specific database object, such as a table.
Given: An extent is a set of logically contiguous data blocks -
Generic datasource by function module to fetch data from multiple tables?
I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
WHERE CARRID IN L_R_CARRID AND
CONNID IN L_R_CONNID.
ENDIF. "First data package ?
* Fetch records into interface table.
* named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
IF SY-SUBRC <> 0.
CLOSE CURSOR S_CURSOR.
RAISE NO_MORE_DATA.
ENDIF.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.Thanks
IF IT_999[] IS INITIAL.
SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
TABLE TP_DATA
FROM A999 AS A
INNER JOIN KONP AS B
ON A~KNUMH = B~KNUMH
INNER JOIN MARA AS C
ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_999
WHERE
* A~KNUMH = IT_999-KNUMH AND
( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
* A~DATBI >= SY-DATUM AND
LOEVM_KO = ''.
SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
TABLE TP_DATA
FROM A999 AS A
INNER JOIN KONP AS B
ON A~KNUMH = B~KNUMH
INNER JOIN MARA AS C
ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_999
WHERE
* A~KNUMH = IT_999-KNUMH AND
A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
* DATBI >= SY-DATUM AND
LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
TABLE TP_DATA
FROM A997 AS A
INNER JOIN KONP AS B
ON A~KNUMH = B~KNUMH
INNER JOIN MARA AS C
ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_997
WHERE
* A~KNUMH = IT_997-KNUMH AND
A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
* DATBI >= SY-DATUM AND
LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
TABLE TP_DATA
FROM A996 AS A
INNER JOIN KONP AS B
ON A~KNUMH = B~KNUMH
INNER JOIN MARA AS C
ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_996
WHERE
* A~KNUMH = IT_996-KNUMH AND
A~KSCHL = 'ZPRB' AND
* DATBI >= SY-DATUM AND
LOEVM_KO = ''.
ENDIF.
SELECT MATNR "u7269u6599u53F7u7801
MEINH "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
UMREZ "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
UMREN "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
FROM MARM
INTO CORRESPONDING FIELDS OF TABLE IT_MARM
FOR ALL ENTRIES IN TP_DATA
WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
IF TP_DATA-KPEIN NE 0.
TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
ENDIF.
IF TP_DATA-KSCHL = 'ZPRA'.
* TP_DATA-MEINH = 'ZI'.
* TP_DATA-KSCHL = 'B4'.
IF TP_DATA-KMEIN = 'ZI'.
TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
ELSE.
READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
ENDIF.
ELSEIF TP_DATA-KSCHL = 'ZPRB'.
* TP_DATA-KSCHL = 'L0'.
* TP_DATA-MEINH = 'ZI'.
IF TP_DATA-KMEIN = 'ZI'.
TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
ELSE.
READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
ENDIF.
ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
* TP_DATA-MEINH = 'ZI'.
IF TP_DATA-KMEIN = 'ZI'.
TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
ELSE.
READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
ENDIF.
ELSEIF TP_DATA-KSCHL = 'ZPR3'.
* TP_DATA-KSCHL = 'B2'.
IF TP_DATA-KMEIN = 'ZI'.
TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
ELSE.
READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
ENDIF.
ENDIF.
TP_DATA-MEINH = '01'.
MODIFY TP_DATA.
E_T_DATA-MATNR = TP_DATA-MATNR.
E_T_DATA-KSCHL = TP_DATA-KSCHL.
E_T_DATA-KHETR = TP_DATA-KHETR.
E_T_DATA-KBETR = TP_DATA-KBETR.
E_T_DATA-KMEIN = TP_DATA-KMEIN.
E_T_DATA-DATAB = TP_DATA-DATAB.
E_T_DATA-DATBI = TP_DATA-DATBI.
APPEND E_T_DATA.
CLEAR WA_MARM1.
CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM -
Move data from multiple Tables to a Single Table & Convert the list to ALV.
Hi,
My aim is to get the list of Materials with their descriptions, with MRP Controller, with Unrestriced Qty. & the Reorder Qty. So, I have to fetch the data from different tables. But finally I am not able to copy or move the fetched data from multiple tables into the single final table.
Also tell me how to convert this list into ALV.
Below is the program code.
*& Report Y_REORDER_REPORT
REPORT Y_REORDER_REPORT.
tables : marc,makt, mard.
DATA: Begin of i_final occurs 0,
matnr type marc-matnr,
maktx type makt-maktx,
DISPO type marc-DISPO,
MINBE type marc-MINBE,
LABST type mard-LABST,
end of i_final.
DATA: Begin of i_marc occurs 0,
matnr type marc-matnr,
DISPO type marc-DISPO,
MINBE type marc-MINBE,
end of i_marc.
DATA: Begin of i_makt occurs 0,
matnr type makt-matnr,
maktx type makt-maktx,
end of i_makt.
DATA: Begin of i_mard occurs 0,
matnr type mard-matnr,
LABST type mard-LABST,
LGORT TYPE MARD-LGORT,
end of i_mard.
SELECT matnr
dispo
minbe from marc
into corresponding fields of table i_marc
where dispo EQ 'STR'.
SORT I_MARC by MATNR.
WRITE: /10 'Material',
75 'MRP',
80 'Reorder Qty.'.
LOOP at i_marc.
Write: /10 i_marc-matnr,
75 i_marc-dispo,
80 i_marc-minbe.
ENDLOOP.
write: /.
SELECT matnr
MAKTX from makt
into corresponding fields of table i_makt
for all entries in i_marc
where matnr = i_marc-matnr.
LOOP at i_makt.
Write: /10 i_makt-matnr,
30 i_makt-maktx.
ENDLOOP.
SELECT matnr
LGORT
LABST from mard
into corresponding fields of table i_mard
for all entries in i_marc
where matnr = i_marc-matnr.
LOOP at i_mard.
Write: /10 i_mard-matnr,
30 I_MARD-LGORT,
40 i_mard-labst.
ENDLOOP.
move i_mard-matnr to i_final-matnr.
move i_marc-dispo to i_final-dispo.
move i_marc-minbe to i_final-minbe.
move i_makt-maktx to i_final-maktx.
move i_mard-labst to i_final-labst.
WRITE: /10 'Material',
30 'Material Desc.',
75 'MRP',
80 'Reorder Qty.',
105 'Current Stock'.
LOOP at i_final.
Write: /10 i_final-matnr,
30 i_final-maktx,
75 i_final-dispo,
80 i_final-minbe,
105 i_final-labst.
ENDLOOP.
*LOOP at i_mard.
*Write: /10 i_mard-matnr,
30 i_makt-maktx,
75 i_marc-dispo,
80 i_marc-minbe,
105 i_mard-labst.
*ENDLOOP.
Regards,
VishalChange like this,
SELECT matnr
lgort
labst FROM mard
INTO CORRESPONDING FIELDS OF TABLE i_mard
FOR ALL ENTRIES IN i_marc
WHERE matnr = i_marc-matnr.
LOOP AT i_mard.
WRITE: /10 i_mard-matnr,
30 i_mard-lgort,
40 i_mard-labst.
ENDLOOP.
LOOP AT i_marc.
READ TABLE i_mard WITH KEY matnr = i_marc-matnr.
READ TABLE i_makt WITH KEY matnr = i_marc-matnr.
MOVE i_mard-matnr TO i_final-matnr.
MOVE i_marc-dispo TO i_final-dispo.
MOVE i_marc-minbe TO i_final-minbe.
MOVE i_makt-maktx TO i_final-maktx.
MOVE i_mard-labst TO i_final-labst.
APPEND i_final.
ENDLOOP.
WRITE: /10 'Material',
30 'Material Desc.',
75 'MRP',
80 'Reorder Qty.',
105 'Current Stock'. -
How to extract data from multiple tables (always got errors)
Dear Experts,
I have a simple mapping to extract data from multiple tables as a source (A, B, C) to a target table (X). Below is the picture:
(Sources)....(Target)
A----------------***
B----------------X
C----------------***
Sample Source Data:
Table A:
ColA1
100
200
etc
Table B:
ColB1 ColB2 ColB3
10 Y Ten
20 Y Twenty
30 Y Thirty
etc
Table C:
ColC1 ColC2
11
12
13
etc
Target table (X) should be (just has 1 group INGRP1):
ColA1 ColB1 ColB3 ColC1
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
Scenarios:
1. Directly map from A, B, C to X. Unable to map with error message: "API8003: Connection target attribute group is already connected to an incompatible data source. Use a Joiner or Set operator to join the upstream data first before connecting it into this operator."
2. Map each source to Expression Operator and then map from each Expression to target table. I am able to map all attributes successfully but got error when validating it with message: "VLD-1104: Attributes flowing into TEST.EXPR_SRC.INGRP1 have different data sources."
How can I achieve the correct mapping for this purpose?
Use Joiner? I have no key to join the sources
Use Set? The sources have different number of columns
Thanks in advance
PratThanks Nico,
I think it will results data like this:
100 10 Ten 11
200 20 Twenty 12
300 30 Thirty 13
etc
and not the expected:
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
But it inspired me to solve this by adding key expression in each source table (B & C) to be joined to table A with this formula:
100+TRUNC(INGRP1.COLB1,-2)
Regards
Prat -
Problem fetching data from multiple tables
Hi,
I am facing a problem in fetching data from 3 different tables. i am able to get the data from 2 tables but when i try accessing data from other table, i am getting redundant data. please help, my query is as under.
select a.*,b.*, c.BidAmount from carregister a , watchlist b, Bidmaster c where a.CarID= b.CarID and b.UserID = 23 and c.BidAmount=(select max(BidAmount) from BidMaster where carid=a.carid group by c.BidAmount);
Regards,
Ujjwal B Soni
<Software Developer>
Baroda Gujarat IndiaHi,
I got the solution. The solved query is as under :
select a.*,b.*,(select max(BidAmount) from BidMaster where carid=b.carid) as MAX_AMT from carregister a , watchlist b where a.CarID= b.CarID and b.UserID=23;
Thank you all for replying me.
Warm Regards,
Ujjwal B Soni
<Software Developer>
<Baroda Gujarat India> -
Does ODI has ability to extract data from multiple tables
We have requirement using ODI to extract data from multiple tables depending on certain logic and spool 100+ files.
How efficient ODI is in data extraction from several multiple tables especially when the extraction is dependent on certain business logic conditions ? Also, if anyone used Peoplesoft Application Engine process to extract volumes of data, how efficient Peoplesoft Applicaiton Engine process is as compared to ODI ? I will really appreciate if someone throws some light on this ? Thanks in advance.
RamOne more option
Create two Integration Interfaces and launch them sequentially:
1st Interface : select a IKM ... Append and activate the Distinct rows check box.
2nd Interface : select an IKM ... Incremental Update and set the UPDATE option to No.
Be aware that the update key in this Integration Interface should be composed of all the target columns mapped. Also activate the Distinct rows check box.
Thanks,
Sutirtha
Edited by: Sutirtha Roy on Jul 21, 2009 10:08 AM -
Displaying data from multiple table/column
hello ..
anybody can help me how to diplaying data from multiple table/ column in PHP. TQFollow the "How do I SELECT, INSERT, UPDATE and DELETE data from PHP?" example from http://wiki.oracle.com/page/PHP+Oracle+FAQ and change the "select ..." query to your favourite join, e.g.
select country_name, region_name from countries, regions where countries.region_id = regions.region_id; -
Jdbc getting data from multiple tables
hi guys
how can i get data from multiple tables in MSAccess
please help>
here is code thata i want to do
i have 3 tables in my MSAccess databace
Stud_O which consist name,surname fields
Stud_I consist address,tel
Stud_E department,faculty fields
Based on this I would guess that you are missing a key field. There is no way to connect the tables.
I make the class to insert data to the tables. But
cant do getting datas from this tables.
can anybody help me in making query
and method that displays reultset strings to the
textBoxes
A select ...
select name,surname from Stud_O. Use the executeQuery() method. -
Update On data from multiple Tables
How can i update data from multiple tables(Using a Join)
using a single update statement.Hii
Suppose i have following tables
create table emp_mas(empno number primary key,name varchar2(30));
create table emp_grad(empno number primary key,grade varchar2(1));
SQL> select * from emp_grad;
EMPNO G
100 A
101 A
102 B
SQL> select * from emp_mas;
EMPNO NAME
100 GREG
101 THOMAS
102 SAM
I would like to update information of employee 'GREG' Using a single update statement as
UPDATE (SELECT E.EMPNO,E.NAME,G.GRADE FROM EMP_MAS E,EMP_GRAD G WHERE E.EMPNO=G.EMPNO) J
SET J.NAME='GREG THOMAS',J.GRADE='B' WHERE EMPNO=100
Then i am getting Error message like this.
ERROR at line 2:
ORA-01776: cannot modify more than one base table through a join view
How can i achieve the result -
Loading data from multiple tables to multiple sheets of excel using SSIS
I have a requirement in which I want to load data from 13 tables to 13 respective sheets of single excel file using SSIS.
Can anyone know SSIS logic for developing package for this?see similar example here
http://visakhm.blogspot.in/2013/09/exporting-sqlserver-data-to-multiple.html
In your case you need to use loop to iterate through tables
First get list of tables in a object variable created in SSIS using INFORMATION_SCHEMA.TABLES view
Then add a for each loop based on ADO.NET variable enumerator to iterate through tables and inside loop follow method as in the above link to create the sheet first and populate it.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
How to get data from multiple tables
Hello Everyone,
I need to read data from a few tables (VBAK, VBAP, VBUK, VBUP etc.) because I'd like to get all open Sales Orders. I've tried to use RFC_READ_TABLE but it looks like it can read only 1 table at a time. I've tried to read data from individual table and then join them but it didn't work out very well because I got about 1.5 millions records from just the VBUP table. So anyone knows if there is any function that I can use to join those tables and just get the records I need?
Any help would be highly appreciated.Hi Nhan,
Thank you for your reply.
Do I have to be a SAP developer to create BAPI on SAP? What kind of access rights do I need?
I've tired to use other BAPIs such as BAPI_SalesOrder_GetList and it doesn't work for me because I don't have all customer numbers and I need to get all un-shipped orders for all customers.
I've read a post on the internet brieftly menitoned that we can create a table to store information about the tables we want to join and then call the RFC_READ_TABLE function. Do you know if that is possible?
Is there any other way you can think of? -
Loading Data from multiple tables into essbase using ODI
Hi,
We have a scenario where data comes from multiple tables. I would like to know how will ODI load this data for the right combination of the membersHi,
I take it each data table has a field which maps to the other table. You can just drag the datastores on to the source interface and create a join between the tables.
Cheers
John
http://john-goodwin.blogspot.com/ -
Accessing data from db table on another client on a separate server
Hi
We are trying to access data from a db table on client 400 NSQ with a program running on client 200 NSD. We are also trying to find the name of the table in which the connection configuration should be maintained. The two clients are on separate servers.
Regards
B.Garlipp
Edited by: B.Garlipp on May 31, 2010 9:22 AMCreate an RFC destination for NSQ system client 400 into your system where program is running (in this case NSD Client 200)
Now in your program you can call function module RFC_READ_TABLE (with reference to this destination) to read entries from the other system.
If you know ABAP, In fact you can create a Z RFC FM specific for this tables, so that you get the data in exact structure. This is because RFC_READ_TABLE returns data in text format with a delimiter.
Cheers.
Edited by: Rashid Javed on May 31, 2010 10:36 AM
Maybe you are looking for
-
Hi, I have Final Cut Pro X version 10.0.2 and OS X version 10.9.2. When I try to export my FCP video I keep getting the error: The operation couldn't be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1. From what I gather reading t
-
TreeView in Left and Image List in Right in Ipad
How can i Impement this Functionality in IPAD : TreeView in Left Side and Images in Right Side. [IMG]http://www.mediafire.com/imgbnc.php/f69fea1bf8f4a5de6dfbd65ea4eb1e0634aba2ceb7fa b2854a0dd449ac385e766g.jpg[/IMG] I am Totally New in IPaD Developmen
-
Error -1074116136 when changing external sampling CLK
I am running a PXI 5105 with an external sampling CLK supplied to the PFI1 by a PXIe 6556. As long as I start up with a fixed frequency, things will run fine. But as soon as I change the 6556's CLK frequency on the fly, I will run into the following
-
TS1424 I don't see the purchased menu item in the bottom menu
Trying to locate my purchases but I don't have a "purchased" menu option
-
Windows System Image Manager (WSIM) fails to catalog
WSIM (version 6.3.9600.16384) from Windows 8.1 AIK does not work with Windows 10 Preview Enterprise. It fails to generate a catalog file for the Windows 10 .wim image. Error message shown below Log file 1:39 PM : This application requires version 6.3