POWL Confirmation - Status field modification in Advance Search Query

Hi All,
I am on Confirmations POWL search query screen (Employee Self Services-Overview-Confirmations-All).
How can I add a new value "Error in Process" in Status field.
In Result screen, I can see some Confirmations which are in Error in Process state.
Thanks and Regards,
Pankaj

Hi Pankaj
Please check the below note.
i think this would be helpful to your question.
1613664
Thanks
Abhishekh Narsingpuria
Message was edited by: Zoltan Keller
please do not ask for points

Similar Messages

New field in account advanced search

Hello Experts,
I'm facing issue where the new field is not showing up on the advanced search screen for account (CRMM_ACCOUNT). The new field has been added to both search request and search result structure. The logic has also been implemented to incorporate the new field into the search query.
When add this new field to the field group, the field displays on the 'Get' drop down box and I was able to search by this new field fine. However, it doesn't get display on the advanced search screen.
Any help would be appreciated.
Thanks,
--Jamie.

Hi Jamie,
What i understand is the field has been added in Field Grp ACC_SEARCH_LOG_04 but its not showing up in Advanced Search right. I hope you should do this step i.e Goto-> Layout Generation and Uncheck 'Only Check Fields Groups' from the checkbox and Enter the Field Grp in Field Grp field over there then execute it. Hope you can see the Custom field there.
When you click Show advanced search you can see the 'Find Dropdownlist box ' select 'All Accounts' value from there and check whether your custom field is populating there or not.
Thanks,
Raju

Who is Who - dropdown list for fields in the advance search

Hello:
In the advance search of the Who is Who service, we have the Organization Unit and Cost Center as searching fields.
We can't be able to see the dropdown list for these 2 fields from the Portal.
Do anyone have any idea of what configuration is missing?
Thanks.
Regards,

hi,
according to my knowledge they don't have Unique ID but unique names attached to them.
open Outlook
go to Tools -> Forms -> Design Form -> select Message then right click on 'To' textbox and chose Advance Properties it has a field 'Name' that name can be used for reference in your development.
hope this helps you.

Duplication of attributes in Add Fields dropdown of Advanced Search

I am instantiating a secondary VO twice in the View Criteria. This leads to a duplication of query able attributes in the Add Fields drop down.
Is it possible to override certain method in af:query, and suppress the attributes appearing in the Add Fields drop down.

Unchecking the queryable attribute would remove the attributes from the Add Fields drop down all together. I need to avoid duplication and display the attributes only once.

Input field in "Advanced Search"

Hello Experts,
I'm setting the "Search Component Set" and "Search Option Set" in our portal, and I've a little question..
In our default "Search Option Set" I disabled the property "Enable Large Search Field" (and it works fine, the input field is not large!) BUT during the search when I go in "Advanced Search" the input field return large... Why??
Is possible to set a not large input field also in "Advanced search" ?
Thanks in advance

Ok,
in SystemAdmin > SystemConfig > ContentManagement > UserInterface > Search
you can find the "Search Component Set" and "Search Option Set".
Configuring "Search Option Set" (the default option set used is "UISearch") you can enable/disable the parameter "Enable Large Search Field", that works on input field width..
If I disable this parameter the input field of my toolArea is short, but if go into "Advanced Search" the input field change and became large...

Customization in Advanced Search Area.

Hi All,
There is a requirement in advanced search area of return orders.
Based on the transaction type selected, corresponding status values has to be populated.
Here im populating the transactio type values in the drop down list box and status value i have to populate in the value help/ drop down/ F4 application, but these status values should be populated based on the transaction type we have selected.
We are working on CRM 5.0 version, and i have done few things,here im listing out the steps.
1) For the Transaction type field i have enable the Roundtrip CS search option.
2) I have created a new ABAP structure for the transaction field(ZCS_Trans_Search).
3) I have appened this abap structure to the calling F4 application (Status F4 appln)
4) implementing the IF_CRM_BSP_MODEL_ACCESS_IL_2FILL_F4_STRUCTURE and IF_CRM_BSP_MODEL_ACCESS_IL_2CHECK ACTIVE_SHUFFLER methods, but still im not able to enter in to this methods in the debug mode.
These steps i have done with the ref to PCUI COOK BOOK 5.0 version, here im copying the steps given in PCUI 5.0
5.1.3.7 Context sensitive value help
The current complex value help is not fully context sensitive. It does not consider the information
the user has already entered on the screen, If it is present in different screen position or in different
line of a list than the field on which F4 is pressed. Thus, the value help often displays result set
which are not related in the current context. To make value help context sensitive following points
must be improved.
The complex value help must consider the entries of relevant fields on the calling
applications screen as search criteria.
The value help application should be enabled to set the value in the Search-Shuffler
depending on the current context.
The application should be enabled to dynamically disable the availability of the value help
icon for a field.
To implement this feature for any field in the field group following steps to be performed:
1. New field group customizing flag is added the by checking this enables context sensitive
search for a input field. Field group customizing is called Roundtrip CS Search.
<Include the figure>
2. Determine the fields to be transferred to the value help application from calling application
and create ABAP structure from this fields.This structure is called Context sensitive
screenstructure (CS structure). Assign this CS structure to the complex value help
application which is associated with the input field. This is done in:
Transaction crmc_blueprint
Open the node Application/Layout node
Edit the value help application
Enter the name of the structure in the filed Struct. For Context-Sensitive srch. Help
(F4_CS_STRUCTURE)
3. PC-UI FW takes the CS structure data from the calling application and defaults them in the
value help applications advance search screen structure. Include this CS structure to the
advanced screen structure of value help application to have the same fields of CS structure
and add the corresponding fields for the CS structure to field group of advance search.
4. Implement IF_CRM_BSP_MODEL_ACCESS_IL_2~FILL_F4_STRUCTURE in the calling
applications Model Access Class. In this method you fill the value in CS structure which will
be passed to the value help application.
IF_CRM_BSP_MODEL_ACCESS_IL_2~FILL_F4_STRUCTURE
5. Implement / or enhance if already implemented
IF_CRM_BSP_MODEL_ACCESS_IL_2~CHECK_ACTIVE_SHUFFLER in value help
applications MAC. This step is optional, With this you will be able to select the correct
shuffler based on the context sensitive data passed with new import parameters values to
this method.
IF_CRM_BSP_MODEL_ACCESS_IL_2~ CHECK_ACTIVE_SHUFFLER.
Please do suggest me.. what are the things further i need to do..
REMEMBER: I have to do this implementation in the advance Search area.
Regards.
Anilkumar.

Hi,
As I understand, you would like to have more than 5 property filter in Advanced Search web part.
According to this article, it is one of the limitation in OOTB Advanced Search web part: "The property search doesn’t allow the users to specify more than 5 property filters." As workaround, "Reuse the OOTB Advanced Search UI’s hidden controls
that determines the search attributes (ASB_PS_…)". Please refer more information via:
http://blogs.msdn.com/b/senthilkumarmani/archive/2010/06/05/custom-advanced-search-metadata-values-pre-populated-for-user-selection.aspx
Also, I find two articles about customizing the advanced search Webpart adding custom properties in case you need:
http://vuppalasanthosh.blogspot.com/2013/03/customizing-advanced-search-webpart.html
https://waelmohamed.wordpress.com/2011/05/31/add-custom-search-properties-in-your-advanced-search-sharepoint-2010/
Regards,
Rebecca Tu
TechNet Community Support

Issue while enabling Advanced Search functionality in Agent Inbox

Hi Experts,
We have enhanced the Agent inbox search to include few EEWB fields. The basic search is functioning smoothly and search is working on both standard and EEWB fields.
But after configuring the Advanced Search for agent inbox, we are not able to find the EEWB fields in the Advance search dropdowns to be searched upon.
We checked the ICCMP_INBOX/InboxAdvancedSearch view configuration and the EEWB fields are also not available in the list of available fields, but are present in the Context node 'SEARCH'.
Are we missing on some configuration?
Any pointers towards the solution would be highly appreciated.
Regards,
Saumya

Closing this thread due to lack of replies

Problem in using quick and advanced search based on transient items

Hi everybody
I want to have an unbound string item in my form and allow users to use advanced search and quick search on that item.
I read the following post About advanced search and added a transient
item on view object and overrode the advance search method in application module and realized that the value of that string was
added to arguments.
Then I decided to add this transient item on entity object instead of view object so that we were able to add the item in one place and
use it in several view objects. I added an item in the entity and unchecked the persistent flag but I can't set queryable flag since it was disable.
I added the item in the view object and by use of application definition I forced the item to be shown in the advance search.
I generate the application and the item was shown correctly in the advanced search but when I set the item in advanced search its value
was not sent to advance search method.
Is it a bug ? (value of the field in the advanced search section was not sent to advanced search method )
Is it a way to add a queryable transient item in the entity object and still benefit from overriding advanced search method ?
I am using Jdeveloper 10.1.3 and Jheadstart 10.1.3.
Any help would be appreciated.
Best Regards
Navid

Navid,
JHeadstart checks whether the attribute definition is queryable before adding it to the list of advanced search attributes. A transient VO attribute can still be set to queryable, for a transient EO attribute this is not possible. We will remove this check on queryability in the upcoming patch release, since you have a valid use case. For now, you can subclass JhsSearchBean and override method createArgumentListForAdvancedSearch and comment out the check for "def.isQueryable()".
Steven Davelaar,
JHeadstart Team.

Enabling Multiple Search in Advanced search

Hi All,
I am trying to enable Multiple search on a particular field in the advanced search for that PCUI application. E.g Search for Opportunities with Partner P1 and P2.
When i perform the search the results show me all opportunities with partner P1 OR Partner P2. So i get all opportunities which belong to partner either P1 or P2 or both
I want to view all opportunities with partner P1 AND P2 i.e i want to search only for those opportunities that have both P1 and P2 in it
Is there anyway we can achieve this
Thanks and Regards,
Varun

Hello,
The MAC for the the advanced search in opportunities (application CRMD_BUS2000111) is CL_CRM_BSP_AM_HEADME_1O.
Create a Z MAC inheriting from this MAC and redefine the method IF_CRM_BSP_MODEL_ACCESS_IL~QUERY.
In you redefined method, you can for example first call the super query method and do your own additional selections after.
The FM used for the standard query is CRM_BSP_OIC_1O_SEARCH_FROM_RF.
You can maybe also check how this FM is called and make you own call of this FM.
Regards,
Frederic

Default Value of status field been shown as "Open"

Hi All,
I am facing some error regarding the status field in service request record type.The status field is showing as "open"when i had created a new service request but its not been reflected under service request detail page eventhough its not been present in piclklist.I want to remove open status as not been shown as open under service request list page.Please suggest me how can remove that "open" from status field,Thanks in advance.
Regards,
Manish.

Hi
You can go to the field setup of service request and edit the Status field. In Default Value give "" to denote null.
By default the system gives open. So when you give the double quotes the new records created would have status as null.
Hope this helps.
-MR

How enable material class for Material Advance Search in MMnn transaction?

Hello,
Isn't possible to include material characteristics in Advance Search (via TREX) for every material fields in ECC? So I can enter material characteristics value in 'Full Text Search' field of material 'Advance Search for Material Using Search Engine' searchelp in order to find material that I want.
I tried to include BUS1088 in SES_ADMIN transaction and succesfully indexed it. But I still can't search with characteristic.
Would you all help me, please.... Thanks.
Regards,
Zam

Hi Colleague,
No. This function is not provided in the R/3 System. Only one record is taken into account during the free goods determination with the existence of several valid condition records. This record is the one with the largest minimum quantity. For this record the system only generates one free goods subitem.
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: #eWith material 1, material 2 and material 3 are free of charge#e or #eIf material 1 and material 2 are ordered at the same time, then material 3 is free of charge#e.
You can refer FAQ note 549963 which clarifies this point.
I hope it can be helpful.
Regards
Ruy Castro

Advanced Search in PCUI

Hi,
I have added new fields to the advanced search in CRM 5.0. I want to select customers with the industrysector (new field). So that I have added this field to the webapplication (application: CRMM_ACCOUNT / view: zcrmmxp /.
So I will have to customize the search question. Where can I do that? In the model Access Class?
Where do I find the search query?
Thank you for your help,
Christian

Hi Christian
I the Fields you added in the Field Group were present in the structure then you do not need to modify anything.
The search logic is already present
If you did an append structure and then added the field, then you need to modify IF_CRM_BSP_MODEL_ACCESS_IL_2~QUERY of your MAC to enhance the search logic for newly added field.
If you want to include the field in Search Result as well then enhance IF_CRM_BSP_MODEL_ACCESS_IL~READ as well.
Regards
-Asad

Advanced Search

Hi !!
We are implementing SRM 7.0. To search for SRM documents we enter to the Strategic Purchaser POWL in EP and access to Advanced Search. We can search and get the document list, but when clicking on a document like an RFX to access to it nothing happens.
What could be the problem?
Many thanks
Ezequiel

Hi,
Have you checked the portal logs in the NWA and/or the logs in the SRM backend?
Regards,
Pierre

Advanced Search Interception

I've got an Advanced Search that I need to intercept and do some pre-processing of the
search criteria before search executes.
I'd first like to add a input field to the Advanced Search UI that is not part of the
view object attached to the Advanced Search model. If the user submits search data in
this "new" field, I'd like to intercept that input data and use it to execute a query
programmatically against a different view object. The results of this query will then
"auto-populate" one of the other fields in the Advance Search model.
In my AppModuleImpl, I notice the following method in my JHS generated application:
public void advancedSearch(String viewObjectUsage, ArrayList arguments)
super.advancedSearch(viewObjectUsage, arguments);
I know I can "intercept" the Advanced Search process at this point, have access to any
search input data from the user via the ArrayList of QueryArguments, and since this is in my
AppModule, I also have programmatic access to my other view object.
I have two things I don't understand how to do:
(1) Add a "new" input field to the searchBean from my UIX Advanced Search page, so that I can
capture my "new" non-model search field.
(2) Create and add a new QueryArgument programmatically and add it to the ArrayList before calling
the super.advancedSearch(..) method. Specifically, the QueryArgument constructor takes some args
that I'm not familiar with (since JHS I think typically does this behind the scenes). Once my
"new" query field is added to the searchBean (from (1) above), I can use this data to execute a
query against another view object programmatically, and the results from that query will feed a
a new QueryArgument that I'd want to programmatically build and add to the ArrayList.
Are there any examples or tutorials of how to do this?
Thanks,
Timothy

Timothy,
The easiest way to do this, is to add a transient attrbute to the VO to get the additional input field in your search area. This attribute should have the queryable checkbox, but does not match a column in the underlying VO table.
When you generate your app, JHeadstart will then add a search field for this transient attribute, and it will create a QueryAttribute for it when you press Find button. Then, by overriding advancedSearch in your app module, you can get this QueryAttribute from the arraylist argument and do your preprocessing.
Steven Davelaar,
JHeadstart Team.

Customizing advanced search

hi,
i am planning to make a customization on the advanced search page of a module.
i want to add 2 new search criteria :
_a CUF
_a basic html <select> list filled with an sql request
how can i add those fields in the advanced search page ?
how can i modify the standard sql request ?
do i need the java source ?
thanks
Dan

Extend the VO to add the criteria columns in the VO if the criteria are not part of query column. Use personalization to add the new columns on the search page.
There are many threads with similar issue discussed. Check them out.
--Shiv

POWL Confirmation - Status field modification in Advance Search Query

Similar Messages

Maybe you are looking for