POWL not showing all columns

Hi,
I am sending the field catalogs with 60 columns but only 40 cols are displayed. I looped through the IT of field catalog and made all col visibility to abap_true. But still then I am not getting all the cols.
Please help me.
thanks in advance.
best regards,
suresh.

Hi,
There are some limitations on ALV, I know that there are only 255 column max in ALV display(Maybe because of Microsoft Excel). and also there are limitations on the characters number, I'm not sure about that, may not more than 5000 char, you can check it in help.
Hope this helps
Bob

Similar Messages

Function module u0091GET_PRINT_PARAMETERSu0092 Not showing all columns

Hello all,
I am using function module GET_PRINT_PARAMETERS
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      DESTINATION    = LOC_DEST
      COPIES         = WF_COPIES
      LIST_NAME      = WF_LISTNAME
      LIST_TEXT      = WF_LISTTEXT
      IMMEDIATELY    = ' '
      RELEASE        = ' '
      NEW_LIST_ID    = 'X'
      EXPIRATION     = WF_DAYS
      LINE_SIZE      = 132
      LINE_COUNT     = 65
      LAYOUT         = 'X_65_132'
      SAP_COVER_PAGE = 'X'
      RECEIVER       = 'SAP*'
      DEPARTMENT     = ''
      NO_DIALOG      = 'X'
    IMPORTING
      OUT_PARAMETERS = WF_PARAMS
      VALID          = WF_VALID.
NEW-PAGE PRINT ON PARAMETERS WF_PARAMS NO DIALOG.
    PERFORM WRITE_PDF_SUMMARY USING P_VALID P_COND P_ZMGC P_ZOGC P_PDF.
    NEW-PAGE PRINT OFF.
But in my report there are 10 columns and in download file its showing only 6 columns .If I increase that size to X_65_200 Then it shows all columns But its not readable. Please tell me how can I use that fix size X_65_132 & it will show all columns .
Message was edited by:
        megha waykar

You r right,But that program is already developed in following sequence
*==> 1. Create Virtual Spool
            using FUNCTION 'GET_PRINT_PARAMETERS'
*==> 2. Write Report to Virtual Spool. Use NEW-PAGE PRINT ON option.
            NEW-PAGE PRINT ON PARAMETERS WF_PARAMS NO DIALOG.
            PERFORM WRITE_PDF_SUMMARY USING P_VALID
            NEW-PAGE PRINT OFF.
*===> 3. Prepare Path and set spool number.
*===> 4. Convert List to PDF format.
             Use function 'CONVERT_ABAPSPOOLJOB_2_PDF'
*==> 5. download PDF file
            CALL FUNCTION 'GUI_DOWNLOAD'.
and it's not showing readable download file.
I don't have to change whole coding. I just want to increase that font.

Out put in Background (SM37) not showing All columns

Hi Folks,
Im creating an out put display for my query in background , we have define an output device , after submitting the query in back ground it just showing me only 10 columns . I mean I its not showing me all columns when I went to SE37-> select job->spool ->view (display).
Why its happening?
Please help me
Cheers
Usman

When you are submitting the job in background by exexuting your query from Sq01 or Tr.code , a screen will pop-up ask for you device name, on the same screen youll see properties hit that, itll take you to another screen and change the report format 65 and 200 or 65 and 200. It depends on your out put device . You can only display report till 255 . If you want to active ALV functional enable in background spool job you have to use extracts for that . So you can download your data in correct format.
You can also decrease the length of variables in query so within 255 characters you can see all report columns.
Hope thisll help you .
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

CRM 2011 Outlook Client not showing all columns in Opportunity Views

Versions:
CRM: 2011 On-Premise - 5.0.9688.1533
Outlook: 2010 Professional - 14.0.6122.5000 32bit
CRM Client for Outlook: 5.0.9690.1992
Basic Problem
The Outlook Client views that show up in Opportunities do not have all the columns that are in the view.
Some of the views do, but not all of them.
Example:
View Name: Won Opportunities
Columns in view: Created on, Location, Quote Type, Scope of Work, Quote Number, Booked Sale Date.....8 other
columns (many custom columns)
Columns in View in Outlook: Icon, Quote Number, Categories, Flag....thats all.
Other Notes
This only happens in the Opportunity section of the Outlook Client.
This does not happen in advanced find in Outlook or anywhere in the web client. This does not happen for any other entity.
This happens on all of our users Outlook clients.
I have tried recreating the view.
No error messages are recording in any logs that I can find.
Any ideas on why this is happening or how to fix it?
Thank you
Paul

1. Are you sure this is a System View and not a User Defined View? Can you take a screenshot of all the availalbe Outlook views when you click on the little down arrow to add a new view? Yes. See the screen shot at the bottom. It is a public
view.
2. What happens when you close the view and add it back? same results.
3. What happens when you restart Outlook? I ask because if you customized your System Views, those are only persistent for a given session. If your restart Outlook, then it should reset the View. we have tried that. and uninstalled Outlook client
and reinstalled. And uninstalled Outlook and reinstalled. Same results. The only view that works for opportunities is the Default Custom View. The strange thing is that the filters are working just fine. just not the columns.
4. A workaround - have you tried creating a new System View similar to the one you want? Yes. same results

SALV_WD_TABLE not showing all columns in Enhancement package 4

Hi all,
I have a problem when using the SALV_WD_TABLE component in SAP environments with Enhancement package 4. When loading the application not all columns are shown.
Any suggestions?
Thanks,
Regards,
Morten

>
Morten Pedersen wrote:
> Hi all,
>
> I have a problem when using the SALV_WD_TABLE component in SAP environments with Enhancement package 4. When loading the application not all columns are shown.
>
> Any suggestions?
>
> Thanks,
>
> Regards,
> Morten
Hi,
Are you suggesting that it was working in earlier version , now with sp4 it is not working without any modification happened ?
In that case i would raise a Support ticket.
Otherwise , you can see if there a method configure_alv and is there any column deletion is happening !!
There may be a Customizing change happened that the layout is changed and become default.

Union all not showing all columns of 2 Excel files

Hi
File Excel1.xls has 2 columns: first name and last name.
File Excel2.xls has 3 columns: first name, last name and middle name.
Why does "Union all" show only first and last names? I thought that it shows also the middle name. I see it by double clicking box
Union all. In box Union All Transformation Editor
I expect such a line:
Output column name: middle name
Union All Input 1: <#ignore>
Union All Input 2: middle name
Thanks!
gec

Hi,
I think you need to select <ignore> in union all input1 and select middlename in unionall input 2 and Type Middlename in Output Coulmn Name.
As Shown Below.
Hope this answer your question.
If it does mark this as answer please.
Regards
Kaushal

Analysis does not show all rows returned by SQL

Hi.
OBIEE 11.1.1.7.0
I have a strange problem. I have a simple table that should return customer number and sales. The report will show all of the sales, but it does not show all the customer numbers. The SQL that OBIEE creates does return all of the customer numbers. When I remove the sales and just include the customer number, the report only shows a couple of the customer numbers (it should show several hundred).
I guess what I'm looking for is any advice for how to debug this. I have spent about 3 days on this problem, so I have tried to look at it from every angle (data, RPD, report).
Any suggestions are appreciated.
Thank you.

Thank you for your reply.
New development. The issue has to do with a descriptor ID column. The customer number column is a varchar field and I set the descriptor ID column to the column_ID field. When I remove the descriptor ID setting, I received all custom numbers.

ALV not showing all the rows! Please help!

Hi Experts,
     I have webdynpro ALV report and I am using SALV_WD_TABLE as the reusable component. In component controller's WDDOINIT I have written the code for pulling teh data from R/3 table and binding it to ALV table.
In the view's WDDOMODIFYVIEW event I have written the following code to get subtotal and grand total of Qty column based on product column.
      I have coded like this:
      lr_field_settings ?= l_value.
lr_field = lr_field_settings->get_field( 'PRODUCT' ).
lr_field->if_salv_wd_sort~set_group_aggregation_allowed( ABAP_TRUE ).
lr_field->if_salv_wd_sort~create_sort_rule( ).
l_sortrule = lr_field->if_salv_wd_sort~GET_SORT_RULE( ).
l_sortrule->set_sort_order( if_salv_wd_c_sort=>sort_order_ascending ).
l_sortrule->set_group_aggregation( ABAP_TRUE ).
*...Aggregate Field PRODUCT
lr_field = lr_field_settings->get_field( 'QTY' ).
lr_field->if_salv_wd_aggr~create_aggr_rule( ).
lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule( ).
lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
It is working now but my ALV table is not showing all the rows. I have 6 products and it is showing from product 2. But it is calculating grand total and subtotal correctly. I am not able to see the first product row and subtotal for that. Even if I click on the ^ icon in the ALV table below it is not showing all the rows.
What could be the problem?
Please help
Thanks
Gopal

did you somehow manage to set the "first visible row" property on table object
to 2.   Only thing I can think of that could cause this effect.
Cheers
Phil

ADF FACES: af:table not rendering all columns

I'm using ADF EA 17 with myFaces 1.0.9 on JBoss 4.0.1/JVM 1.4.2_07-b05. The af:table is embedded within an af:panelgroup (being body of af:panelbox).
The af:table is not rendering all columns (only last 2 out of 8 cols total). The model behind the af:table is a java.util.List. Debugging shows that the list is filled up with beans correctly and that each of the properties of such a bean corresponding to a table column are also set correctly.
Strange thing is that sometimes all columns are rendered ok. Especially if i make heavy changes on the jsp (e.g. removing all but 2 cols from the af:table) and dropping it into the .../jboss/server/../tmp/deploy/tmpXYZ-exp.war directory. Restarting JBoss results in the old behaviour. Also closing browser and re-opening it yields to the missing columns again.
I've set breakpoints on the bean properties representing on table column and i can see, that the getter methods aren't called (all but those 2 that get rendered finally)
Table has multiselection enabled with 1 command button.
This happens with both IE 6 and Firefox 1.0.4; no oracle, myFaces exceptions visible on console or any log file.
Has anybody made same experiences so far or an idea what the problem really is ?
best regards,
Christoph.

I've tried it also with a plain af:table without any surrounding af:panelgroup or/and af:panelbox. Same result.
The bean holding the table-model (the java.util.List) is in session-scope. the table-model is update by an actionListener fetching values from an EJB. Could the session-scope be a problem ?
Potential candidates from my point of view, that might cause trouble here:
--) Caching (i've seen that sort of "CachedRenderers" are used
--) partial page rendering
--) multi-threading issue.
--) or any silly mistake of mine :-)
best regards,
Christoph

Cache does not show all config items

SXI_CACHE is not showing all my config items.
When looking at SXI_CACHE, I noticed that only the config items pertaining to actual SAP services (Business Systems) seem to show up?? Is this normal? I've refreshed the cache (both delta, and full).
Also, when I double-click on Services, all the services show up, but the ones that are not actual SAP systems have an 'X' in the 'Flag' column ("Event has occurred") What does that mean?
Background:
We are in the prototype stage; I am the only one in the box. I created a simple File-BAPI scenario just to demonstrate that things worked. For the last couple months, the comm channel was set to Inactive. Attempted to reActivate the comm channel to get back in to it, and it's not working. I've double-checked everything I can think of, from the obvious (is there a file to be pulled), to the not-so-obvious (was the scenario changed by someone else in my absence).
Also, there are not sender agreements listed in SXI_CACHE?
Thanks in advance,
Brian

Actually, I wasn't using Business Service, I was using Business Systems from the SLD as Services without Party.
However, I just created a Business Service, filled in the Inbound and Outbound Interfaces, created Comm Channels, RD, ID, SA, RA, and activated all - still no luck. This time, some of the pieces DO show up in the cache. The ID, RA, and the Receiver CC show up in the cache, the RD, SA, and the Sender CC do not.
This has got to be a cache problem. We are using a VERY old and slow machine to run XI on. Each time I activate something in the DR or CD, I have to go to SXI_CACHE and Start Delta Refresh. I'm thinking there may be a timeout setting or something. What's frustrating is that it used to work just fine.
Any other cache related ideas?
***EDIT - just rechecked - getting messages from newly created Business Service, but they are failing in mapping....I guess I need to delete and recreate everything and try again. Maybe that will clear up the cache issue....
Message was edited by: Brian Vanderwiel

Vertical scrollbar not showing all the records when I scroll down.

Vertical scrollbar not showing all the records when I scroll down.
Using Oracle forms 10g , operating system windows
I have two fields with number of items dispayed = 15.
I have a vertical scroll bar with them. There are 34 records in the table but the scrollbar only shows 15 records.
Here are the properties for block / scrollbar.
WORK_CATEGORY
- Subclass Information
- Comments
* Navigation Style                                Same Record
- Previous Navigation Data Block
- Next Navigation Data Block
- Current Record Visual Attribute Group
- Query Array Size                                0
- Number of Records Buffered                      0
* Number of Records Displayed                     60
* Query All Records                               No
- Record Orientation                              Vertical
* Single Record                                   No
- Database Data Block                             Yes
- Enforce Primary Key                             No
- Query Allowed                                   Yes
- Query Data Source Type                          Table
* Query Data Source Name                          WORK_CATEGORY
* Query Data Source Columns
* Column Name                                   JOB_TYPE
* Column Type                                   VARCHAR2
- Column Type Name
- Parent Column
* Length                                        30
* Precision                                     0
* Scale                                         0
* Mandatory                                     Yes
* Column Name                                   WORK_CATEGORY
* Column Type                                   VARCHAR2
- Column Type Name
- Parent Column
* Length                                        30
* Precision                                     0
* Scale                                         0
* Mandatory                                     Yes
- Query Data Source Arguments
- Alias
- Include REF Item                                No
* WHERE Clause
* ORDER BY Clause                                 job_type
- Optimizer Hint
- Insert Allowed                                  Yes
- Update Allowed                                  Yes
- Locking Mode                                    Automatic
- Delete Allowed                                  Yes
- Key Mode                                        Automatic
- Update Changed Columns Only                     No
- Enforce Column Security                         No
- Maximum Query Time                              0
* Maximum Records Fetched                         0
- DML Data Target Type                            Table
- DML Data Target Name
- Insert Procedure Name
- Insert Procedure Result Set Columns
- Insert Procedure Arguments
- Update Procedure Name
- Update Procedure Result Set Columns
- Update Procedure Arguments
   Don't know where am I going wrong. I'll really appreciate if you can help me in this.
Thanks.
Edited by: 831050 on Sep 14, 2011 8:05 AM

One of the items is a list item.. here are it's properties:
* Name                                          JOB_TYPE
* Item Type                                     List Item
- Subclass Information
- Comments
- Help Book Topic
- Enabled                                       Yes
* Elements in List
* Label
* List Item Value                             LIST20
* List Style                                    Combo Box
- Mapping of Other Values
- Implementation Class
- Case Restriction                              Mixed
- Popup Menu
- Keyboard Navigable                            Yes
- Mouse Navigate                                Yes
- Previous Navigation Item
- Next Navigation Item
- Data Type                                     Char
- Data Length Semantics                         Null
- Maximum Length                                30
- Initial Value
* Required                                      Yes
* Copy Value from Item
- Synchronize with Item
- Calculation Mode                              None
- Formula
- Summary Function                              None
- Summarized Block
- Summarized Item
- Current Record Visual Attribute Group
- Distance Between Records                      0
* Number of Items Displayed                     15
- Database Item                                 Yes
* Column Name                                   JOB_TYPE
- Primary Key                                   No
- Query Only                                    No
- Query Allowed                                 Yes
- Insert Allowed                                Yes
- Update Allowed                                Yes
- Update Only if NULL                           No
- Visible                                       Yes
* Canvas                                        CANVAS2
- Tab Page
* X Position                                    47
* Y Position                                    137
* Width                                         187
* Height                                        18
- Visual Attribute Group                        DEFAULT
- Prompt Visual Attribute Group                 DEFAULT
- Foreground Color
* Background Color                              white
- Fill Pattern
- Font
* Font Name                                     Tahoma
* Font Size                                     10
* Font Weight                                   Demilight
* Font Style                                    Plain
* Font Spacing                                  Normal
* Prompt                                        Job Type
- Prompt Display Style                          First Record
* Prompt Justification                          Start
* Prompt Attachment Edge                        Top
- Prompt Alignment                              Start
* Prompt Attachment Offset                      10
* Prompt Alignment Offset                       0
- Prompt Reading Order                          Default
- Prompt Foreground Color
- Prompt Font
* Prompt Font Name                              Tahoma
* Prompt Font Size                              10
* Prompt Font Weight                            Bold
* Prompt Font Style                             Plain
* Prompt Font Spacing                           Normal
- Hint
- Display Hint Automatically                    No
- Tooltip
- Tooltip Visual Attribute Group
- Direction                                     Default
- Initial Keyboard State                        Default
- Keyboard State                                Any

Show all columns

Hi,
For big table how about the way to show all columns in one line using Toad 10?
Best Regards

HuaMin Chen wrote:
Hi,
For big table how about the way to show all columns in one line using Toad 10?
Best RegardsApart from what Billy said, what is a "big" table? In what way would all columns not be shown in one line?
Even on the TOAD forums they wouldn't know what you're talking about.

Text Entry Box not showing all text

I am creating a simple exercise where I would like the user to copy text from the course, paste it into word, and report back what the word count is. I thought perhaps the Text Entry Box would be the best way to go, since if you click on the existing (default) text, you can copy it. However after I place the paragraph of text in the box, and resize in the editor so that all the text shows, it does not show all the text when playing back, either previewd or published. It only shows the last few words of the last line at the top of the box.
Is there something I am missing? Or, is there an easier/better way to do what I need?
Thanks

Hi all
If this is Captivate 4, there may not be any need for a widget to do this. I'm guessing you haven't tried enabling the Scroll Bar for the Text Entry Box (TEB)?
When I just plop a TEB on a slide, I get this in edit view:
During playback it looks like this:
But if I edit the TEB properties and enable the Show Scrollbar option:
I get this in the output:
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

SelectOneChoice not showing all values from database

Hi!
I have to put a list of values in my select one choice. When I do the query in database, all the values are selected. But, with the same query on JPQL, the select on choice do not show all values in database. Anyone can help me, please?
P.S.: I am using SelectOneChoice with SelectItems, in JDeveloper 11g
Code:
<af:selectOneChoice id="selAction" value="#{row.idCmd}"
unselectedLabel="<Selecione>">
<af:forEach var="alertTypeNode"
items="#{bindings.actionFindAll.iteratorBinding.allRowsInRange}">
<af:selectItem value="#{alertTypeNode.dataProvider.idCmd}"
label="#{alertTypeNode.dataProvider.nmCmd}"
id="si1"/>
</af:forEach>
</af:selectOneChoice>

In your page binding check the rangesize setting for the executable you use - set it to -1.

Transaction MD04 does not show all open sales/orders deliverys

Hi,
Transaction MD04 does not show all open deliverys and sales orders for plant 0705 and certain materials.
Can anyone tell me the reason for this?
Regards,
Brijesh

Hi
Run SDRQCR21 report in Transaction SE38 for that material it will resolve your issue.
Please confirm
Amit

POWL not showing all columns

Similar Messages

Maybe you are looking for