POWL WD: No action has been triggered after toolbar button click

Hi,
I am using standard SAP Web dynpro application POWL for creating Service entry sheet from PO.
On the toolbar we have buttons 'Create Service Entry Sheet', 'Display Service Package', 'Document tracing'.
When I click on the row with the corresponding PO and then click on above mentioned buttons nothing happens, I can see at the taskbar : javascript:Void(0), which probably means that no action has been attached to that button.
I have debugged the WD, seems to be OK, perhaps I am missing some configurations, because I've already traced my authorizations and they are OK
What could be the problem ?
Please advise !
Thanks,
Stefan
Edited by: Stefan Kolev on Mar 6, 2012 2:56 PM

Haven't gotten any response on this post and I really need to resolve this issue. Anyone can help??
Eric.

Similar Messages

HT1430 my daughter's ipod has been disabled after too many wrong password attempts. The ipod was not synced to a computer. How can we get it started?

My daughter's ipod touch has been disabled after too many wrong password attempts.
The ipod was never synced to the computer so can't connect to itunes.
How else can we enable the ipod touch again?

Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. In your case, choose any computer with iTunes software. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

How do I know the daq card is collecting data i.e. has been triggered trigger

I want to alert the user that the daq card is collecting data after he pushes the trigger switch. I wish to update a message text box when it has been triggered. Thanks, PCI-6221 37 pin

You could use something like this, to ensure that at some specific point in your code a string indicator on the front panel is updated. After placing the string indicator, right click on it go to Create>>Proprety Node>>Text>>Text. The string indicator will update to the input of this property node when this sequence structure is reached. Does that help?
Regards,
Shane C
Regards,
Shane C
Applications Engineer
National Instruments

How do I get into iTunes to access Netflix, when I get "iTunes unable to connect until time has been set", after submiting my password?

How do I get into iTunes to access Netflix, when I get "iTunes unable to connect until time has been set", after submiting my password?

You need to follow the instructions in this article that best apply to your situation:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
If you do not have a backup in either iCloud or iTunes, then you will have no way to retain the information on your device because you will have to restore it in order to access it again.
Sorry,
GB

How can I allow the application to line through a field that has been locked after being digitally signed? We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once

How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?

You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.

My Apple ID has been disabled after I tried to change my credit card details.

Hi,
My Apple ID has been disabled after i tried to change my credit card details on my iTunes Store account. I am being charged money for purchases that i have never made even when the apps that i tried to download are free. I am being charged €1.98 every time. When i checked with my bank everything was in order from their end. I am changing the details and doing my purchases from my iPad. Being in Malta i use the Maltese iTunes Store for the purchases.
Can somebody help me out with this?
Thanks!
Jeremy

You'll need to contact support for this.
https://expresslane.apple.com/GetproductgroupList.action

My Iphone 3GS has been disbled after I put wrong password repeatedly. How do I open the phone now?

Iphone 3GS has been disbled after repeated wrong password inputs. please help open the phone.

Use itunes restore the phone.

How can I allow the apHow can I allow the application to line through a field that has been locked after being digitally signed? plication to line through a field that has been locked after being digitally signed?

How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?

HI,
Kindly post this query in Acrobat forum:Acrobat
Regards,
Florence

Customising the "Action has been completed" page

Does anyone know how to customise the page that is shown to a user when they go back to a completed activity?
By default you have a white page with the info picture and the words " Action has been completed"
I was wondering if anyone knows how to customise this completed page so that it shows something a bit nicer? (a static HTML page would be great to put in its place)
We're on EP7 SP14 if that helps...

Hi Danny,
This can be achieved by using the "Callable Object for Display". if you are not aware there are two types of callable objects.
1. Callable Objects for Execution (The one that we use mostly) - this callable object is called by the GP runtime when then user is executing the step.
2. Callable Objects for Display - this callable object will be called when the execution for the step is already complete. And during later stage user comes back and clicks on some previous step.
You can also check following link for more info
[Re: Difference between Callable Object for execution and Display|Re: Difference between Callable Object for execution and Display]
Another link
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4848c8d1-0c01-0010-33b9-87a6488c48a7|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4848c8d1-0c01-0010-33b9-87a6488c48a7]
Hope this helps
Regards,
Ashutosh
Edited by: Ashutosh Rastogi on Feb 21, 2008 5:42 PM

Photos stream has been disabled after last update

My Photos stream has been disabled after last update, after enabling it all photos were deleted and only new photos are being updated there.

Hello,
Have you check this link? http://support.apple.com/kb/ts3989

My Apple ID has been disabled after an Amex breach. What now?

My Apple ID has been disabled after an Amex breach. What now?

You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on any iOS device that you have by tapping on your id in Settings > iTunes & App Store (Settings > Store on iOS 5 and below) and then log back in so as to 'refresh' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Can you track a form if the file name has been changed after distribution?

I created a form in Adobe Acrobat X Pro -- I then used the distribute feature and sent the form to myself using the internal server. After testing the form, and making sure all was good, I copied the attachment from the email I received when I distributed the form to myself, and sent it to my boss (via outlook). He then changed the file name, and sent the form out to our members. Our members are completing this newly-changed document instead of the original form. They are able to "Submit The Form", and it still looks as though its coming back to me via the dialogue box. However, I have no received any responses in my original document's tracking. When I tried submitting this new form myself to see what happened, I just received an message that says "Your response is being queued for submission", but it never tells you whether the form was actually submitted or not. Is there any way that you can track this form even though the file name has been changed? And if people are submitting their forms to me, where are they going?
Please help!
thanks,
desiree

I understand that you don't want to redo all the linking with the markers. You can try following (make a copy of your project first to be safe) :
- close your project and quit DVDSP
- move your old asset, and replace it with the new one
- reopen your project
A warning message should tell you that this asset has changed, but your marker will remain at old position. If the asset length are not the same, old length information will be used by DVDSP. To correct this, delete the asset from the timeline, and drop it back to the timeline.
Now you just have to move the marker to the right position.

How to check remotely that a PC has been restarted after Labview Runtime 2011 has been installed on it?

Hello,
I am deploying a Labview 2011 application on 150 XP-machines in various plants worldwide. Currently all machines still have an old Labview 8.21 runtime (+old DAQmx). I have sent a procedure to my colleagues in the plants so that they install the new runtime (+ new DAQmx). On my side I have built a code to check from my Pc if a certain registry key is present on the 150 PCs which tells me that the new installer ran or not.
The key that I found is:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Installer\Products\1C5E801AE54C4AE43A59FC169F95CA28]
"ProductName"="NI-DAQmx MAX Configuration Support 9.3.5"
"PackageCode"="61EEAEC207A28A842B3341ED6809453D"
"Language"=dword:00000009
"Version"=dword:0923c001
"Assignment"=dword:00000001
"AdvertiseFlags"=dword:00000184
"InstanceType"=dword:00000000
"AuthorizedLUAApp"=dword:00000000
"Clients"=hex(7):3a,00,00,00,00,00
This works well but it does not tell me that the PC has restarted after the installer has been run. If I do not restart the PC and try to execute my Labview 2011 executable I get a long error message (NIDAQmx not registered,...).
As it seems difficult to get the properties of a key to know when it was installed I was rather leaning towards checking if a certain DLL (?) has been registered or not. But it is just a vague idea and I do not know how to put that in place.
I am attaching the current code that I have and that works well but cannot make the difference between Labview 2011 runtime installed and PC restarted or not.
Thanks for the help
Christophe
Solved!
Go to Solution.
Attachments:
Check Remote Registry Key.vi ‏45 KB

You might look for a file that would be created as part of installation to determine the install date/time (ini or other support file created as part of runtime install)
Combine that with a query of the station's uptime and you could calculate if the station has been up longer than the time since the install. Not perfect, but should be possible...
http://en.wikipedia.org/wiki/Uptime#Using_WMI
wmic /node:"my-server" os get lastbootuptime
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Re: Satellite P - CD/DVD drive has been disabled after installing itunes 8

*Help*! After installing itunes 8 my CD/DVD/RW has been disabled.
This has happened before and I have restored it by deleting the upper and lower filters in the Vista registry but then itunes tells me that "The registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." and I am unable to burn anything from itunes.
Does anyone out there know how to restore the CD/DVD/RW drive and retain the full use of itunes please?

Have you tried to reinstall iTunes?
Reinstall the old iTunes, reboot the computer and clean by using CCleaner. Then you can install the newest version of iTunes.
If it doesnt work try to remove the upper- and lower filters again. Maybe you should do this after you have reinstalled iTunes.
Last but not least, this could be useful for you:
http://aps2.toshiba-tro.de/kb0/TSB84026P0000R01.htm

My account has been "disabled" after my credit card expired. I updated it to buy the additional i cloud storage but now it won't let me do anything! help, please!

my credit card expired so my iCloud storage was deactivated. I updated my credit card and now it not only wont let me purchase more storage, but says my account has been deactivated. help, please!

Hi mamamuddpie,
If your Apple ID account has been disabled, follow the steps below to reset your password and gain access. There is a link in the article to the Apple ID Security team if you need help with this.
If your Apple ID has been locked - Apple Support
http://support.apple.com/en-us/HT204106
You might see one of these alerts:
“This Apple ID has been disabled for security reasons”
"You can't sign in because your account was disabled for security reasons"
"This Apple ID has been locked for security reasons"
If your Apple ID was locked, you can go to iForgot to unlock it with your existing password or reset your password. You can also click the Reset Password or Forgot Password button in the alert. Remember to type your full email address when you're asked to enter your Apple ID. For example, [email protected] or [email protected]. If you use two-step verification for Apple ID, you need to use your recovery key and a trusted device to regain access to your account.
If you can't reset your password and you don't use two-step verification, contact Apple Support. Update your password in iCloud settings
After you change your password, you might need to update it in iCloud settings on your devices.
iPhone, iPad, or iPod touch
Go to Settings > iCloud.
Tap Edit, if asked.
Type your new password and tap Done.
Mac
Go to Apple menu > System Preferences.
Click iCloud.
Click Sign Out.
Type your new password and click Sign In.
Windows
Choose Start > Control Panel.
Double-click iCloud.
Click Sign Out.
Type your new password and click Sign In.
Email
If you use an email app to get iCloud email, the app will ask you to enter your new password when you check for mail. If OS X Mail doesn't ask you for your password, check your Mail preferences. For any other mail app, check the app's documentation to get help changing your email password.Update other services, such as iTunes and FaceTime
If you use your Apple ID in the iTunes Store, App Store, iBooks Store, iMessage, Game Center, or FaceTime, you might need to update your password for those services.
iPhone, iPad, or iPod touch
Go to Settings and tap the service.
Tap your Apple ID. For iMessage, tap Send & Receive and then tap your Apple ID.
Tap Sign Out.
Sign in with your Apple ID and your new password.
Mac or PC
If you try to sign in to the iTunes Store or Mac App Store, make a purchase, or update an app, you'll be asked to enter your password.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Dec 17, 2014
When you are able to access your account again, check to make sure your billing information has been updated.
Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support
http://support.apple.com/en-us/HT201266
I hope this information helps ....
- Judy

POWL WD: No action has been triggered after toolbar button click

Similar Messages

Maybe you are looking for