PP 5.1 Spur in Soundbooth abmischen u. wieder als 5.1 ausgeben

Hallo Leute,
ich habe mit meiner Videokamera ein Full-HD Video mit einer 5.1 Tonspur aufgenomen. Ich möchte diese Tonspur und zwar jede einzelne Spur, nun in Soundbooth CS5 abmischen.
Kann mir jemand kurz beschreiben wie das möglich ist?
Ich habe bereits selber die 5.1 Spur in Soundbooth eingelesen und anschließend in 6 Monospuren umgewandelt, sodass ich jede einzelne Spur selbst bearbeiten kann. Wie kann ich jedoch nun die 6 einzelnen Monospuren wieder in eine einzelne 5.1 Tonspur umwandeln?
Ich habe hierzu schon o. g. 6 Monospuren wieder als .aac 5.1 speichern wollen, jeodoch hierbei mekert das Programm, dass das nicht mögich ist!!!
Was mache ich falsch?
Vielen Dank vorab.

Hallo Antonio,
dann mal Danke für den hilfreichen Beitrag. Die fehlerhafte pdf-Ausgabe, die Eva meint ist in meinem Ursprungspost exakt beschrieben und konnte von Adobe nachvollzogen werden. Es liegen hier kein Bedienungsfehler vor. Ich würde vorschlagen nochmal das obige genau nachzulesen.
Damit nicht der Eindruck entsteht, nur ich und Eva hätten das Problem:
www.hilfdirselbst.ch/foren/Verschobene_Textobjekte_bei_Direktexport_aus_InDesign_CS5_5_P48 4338.html
Alle bisher vorgeschlagenen Fehlerbehebungen innerhalb Indesign 5.5 sind Krücken und mit Aufwand verbunden oder verhindern schlicht die Nutzung von Gestaltungsfeatures die Transparenzen nutzten (Vorschlag von Adobe :-)) -> das kann es wirklich nicht sein!!
Da mittlerweile die Version 5.5 nicht mehr aktuell ist, glaube ich allderings auch nicht, dass Adobe da noch was nachschiebt. Für Produktionssicherheit sorgt bei mir (und vier weiteren Arbeitsplätzen) seit meinem Post von Anfang 2012 der Umweg über Acrobat Professional. Es ist zwar nicht mehr so komfortabel und schnell wie früher, verhindert aber auch weitere - dann auch nutzergenerierte - Fehler (Farben, Schriften, Auflösungen, Transparenzen, Profile und und und).
Gruß Ulf

Similar Messages

In CS5 Soundbooth 6 Monospuren als 5.1 ausgeben?

Hallo Leute,
ich habe aus einer originalen 5.1 Soundspur, so wie sie mein Camcorder augenommen hatte, in Soundbooth CS5 in 6 Monospuren umgewandelt um die Spuren einzeln zu bearbeiten können. Wie kann ich nun wieder aus meinen 6 Monospuren ein aac. 5.1 File erstellen?
Grüße

I believe LR 4 supports 7.x raw.
Understand CS6 will now read future versions of ACR like 8.x but without enhancements. THis is allow new cameras to be read.
Do not think there are any 3rd party plugins for reading 7.x on CS5.
DNG infor here http://www.adobe.com/products/photoshop/extend.displayTab2.html

Soundbooth CS5 5.1 DD-Spur neuabmischen

Hallo,
ich habe von Minnetonka den Surcode für Dolby Digital 5.1 für CS5.
Mein Ausgangsproblem ist, wie kann ich meine 5.1 Dolby Digital Tonspuren einzeln bearbeiten und dann wieder in 5.1 als z. B.: .aac File ausgeben?
Ich habe hierzu in Soundbooth mein 5.1 File in eine Mehrspurdatei mit 6 Monospuren konvertiert. Dadurch konnte ich jede Spur einzeln bearbeiten. Nun fehlt mir jedoch der letzte Schritt, wie ich wieder aus den 6 Monospuren ein 5.1 File erstellen kann, oder mache ich hierzu grundsätzlich etwas falsch?
Ich habe es über den Weg vesucht, meine 6 Monospuren nun unter "Speichern Unter" Audio Only *.aac zu speichern. Anschließend habe ich beim Codec: aac und bei den Ausgabkanälen 5.1 ausgewählt. Beim anschließend Starten erhalte ich jedoch die Fehlermeldung, dass die Anzahl der Audio-Ausgangskanäle mit den Audio-Eingangskanälen übereinstimmen oder geringer sein muss.
Aber ich habe doch 6 Tonspuren?
Des Weiteren habe ich es über exportieren versucht. Hier wird jedoch keine Datei erstellt und eine Fehlermeldung erhalte ich auch nicht!
Daher meine Frage: Was mache ich falsch?
Vielen DANK vorab für eine Antwort.

Hi Shawn,
I understand, but at least with stereo files I can add an EQ, compressor, etc. that applies to all (both) channels. Is there not a similar capability for 5.1 files? I don't so much need per-channel editing (I can always split the channels out to separate files in that case), but basic EQ/compression is really what I'm looking for.
Best,
Chris

How can I export a single track in Soundbooth CS5?

Greetings,
I have built up a single track in Soundbooth composed of several repeated clips. I wish to export this single track.
How can I do this in CS5 Soundbooth?
Thanks,
folsombob

Sorry nobody has answered this. I haven't been in this forum in a couple of weeks.
If you have all the tracks right where you want them, are you able to save the file as an mp3?
Are you looking to export it for web use?
For video tracking?
I'm not sure why you'd want to export it as opposed to saving in one of the many available formats.

Why does Soundbooth stop immediatly on playback

I have a Mac Pro 2 x 2.26 GHz Quad-Core Intel Xeon with 32 GB memory. I've recently purchased and installed Adobe Master Collection CS4. After loading a mp3 track into Soundbooth CS4, I click the playback control and it stops every time after just a split second. I've tried changing the Audio Hardware settings, adjust the Buffer Size, starting up with shift key depressed to force replacing the default preferences. I've checked to see that "Continue audio playback in background" is selected and that the Default Device is correctly set. I've also renamed the Adobe>Preferences>2.0 folder and restarted to force new preference setting to no avail.
I tried the 5 stepsdescrived by _durin_ :
If you've got a few minutes, I'd like to find out the results of this test:
1. Close Soundbooth if it's open. Open Finder, and go to Applications > Utilities > Audio MIDI Setup and launch that.
2. In the menu bar, click Audio > Open Aggregate Device Editor
3. Click the "+" button to create a new Aggregate Device. Name it whatever you like and select the Built-in Output and Built-In Line Input as the two devices, then click Done.
4. launch Soundbooth, open the Preferences > Audio Hardware and change the selection to your new Aggregate Device. Click OK.
5. See if you can reproduce the behavior you experienced before.
Thanks,
Durin
except I was unable to creat a Aggregate Device. When I hit the "+" button, nothing happened. Is it supposed to pop-up a dialogue or something to create this Device?
I also tried Bruno's suggestion
Hi, I've got the same problem on my new iMac, and finally I think I was able to fix it.
1. First of all you must be connected as an administrator of the Mac.
2. Then you have to open the preferences window for the audio hardware (Adobe->Preferences->Audio Hardware)
3. Change the selection for Default Device (e.g. select System Default I/O)
4. Now it should work
Please note that after this action, it started to work even if I restore the previous default device. Moreover, now it works also if I start it without being an administrator. Hope this could help you.
Bruno.
but when I selected "System default I/O" I got this errer:
Soundbooth has encountered an error.
[/Papago/2.0-gm/MediaCore/MediaLayer/AudioSupport/Make/Mac/../../Scr/Mac/CoreAud ioHost.cpp-536]
I am greatful for any continuing advise.

I ultimately resolved this same problem by deleting
/Library/Preferences/com.apple.audio.AggregateDevices.plist
Good luck,
Ralf

How can I recover lost work in Soundbooth 4?

While editing an MP3 file in SB4, Soundbooth crashed, and crashed hard. First the green soundwave editing pane went blank, then I received multiple "Adobe Soundbooth has encountered a fatal error and must close" alert windows (over 100) until the computer froze and I was forced to reboot (Windows 7).
When I rebooted, the MP3 file I was editing was in its original state and all 3+ hours of editing work was lost. This, despite the fact that I had manually saved the file multiple times as my editing progressed. Where did all of those manual "save" operations write their data? My expectation is that if I perform a "Save" operation while editing an Mp3 file, that all changes I made before that time are persisted to the file! It appears this is not the case.
Is there a "secret" location that Soundbooth saves files out to where I can attempt to recover them from? Thanks for any help
-Peter Laudati
Developer Evangelist - Microsoft
Blog: http://www.peterlaudati.com
Podcast: http://www.connectedshow.com

I would really like to know this as well! I just finished mastering a new mix for my website at Wedding DJ San Diego and clicked over to another app really quick, when I clicked back to Soundbooth, it blinked and disappeared completely. After reopening the app, my file is nowhere to be found!
If anyone knows how to recover the file please let us know!!!

Soundbooth cs4 will not launch in wondows 7

I have been using CS4 production premium since the end of February.
At that time I opened Soundbooth several times just to take look and learn the landscape. That was several months ago.
I am now at the point where I would like to learn Soundbooth and when I tried opening it, the application would launch to the point where it reads that it is " loading player media core.pm".
When it reaches this prompt the application goes away. It does not lock at that point, it goes away.
I have tried most of the other applications in the production premium package and they all launch.
I am running windows 7 on an HPz800

When it shuts down at this point, it's either a bad codec in Windows, which isn't very likely or you'd have seen sound problems elsewhere, or something in the SB install has become corrupted, namely the interface to the media core.
Have you tried uninstalling and reinstalling SB from the Production Premium discs?

How to view higher frequencies in Soundbooth CS5

I am using a zoom h2 portable recorder and set the settings to 96khz at 24bit. But I load the audio file into Soundbooth CS5 it only shows up 10khz in the Spectral Frequency Display. How do I view above that? I would like to see all the way up to 96,000Hz.

Best place to start is by telling us which camera model the NEF files are from.
Supported cameras are listed here
Camera Raw plug-in | Supported cameras
Compatible Adobe apps are listed here
Camera Raw-compatible Adobe applications

Soundbooth cs4/cs5 Error

Hi, i have been getting an error message whenever i try to change the audio default device to the system default device input/output. as of now it is on default input/output but i cannot hear a thing.... i use soundbooth RARELY the last time i used it was about 2 weeks ago and it was working great! today i tried using it again and this was when i discovered the issue. i get this error when i try changing the default audio:
once again i had never experienced this before till today. i have done the following to try to solve this problem:
1) reinstalled CS4
2) reinstalled soundbooth only
3) googled and found this: http://forums.adobe.com/thread/461119?decorator=print&displayFullThread=true
the link i found seems to be the same problem only the solutions offered up there did not work for me.... i am running snow leopard and have been running it ever since it came out...i did not have the problem even then...why now?
i also tried what that user said to:
1. First of all you must be connected as an administrator of the Mac.
2. Then you have to open the preferences window for the audio hardware (Adobe->Preferences->Audio Hardware)
3. Change the selection for Default Device (e.g. select System Default I/O)
4. Now it should work
i got stuck on step 2 because i cannot find the audio hardware file/folder i do not have it....
lastly i tried this : http://forums.adobe.com/thread/548571
once again i do not have those files ive searched on my macbook....
someone help

I am having a sililar problem: Adobe Soundbooth CS4 on Macbook Pro Intel. I created a multitrack project, several aif files, several layers. Saved as an .asnd. Now double clicking it launches Soundbooth generates this error: "General error opening the file, or perhaps the file is of an unsupported version". I've tried copying and retitling the file, I've tried opening the program, then clicking <file> and <open> to open the file instead of just double-clicking on the file.
Now here's a kicker: I can open it in After Effects (no multiple layers, acts like a multitrack mixdown)
I can open it with The Unarchiver.app get all the sound files, including both edited and raw, lots of metadata files. Can import the sound files into Soundbooth but not the metadata (!?) so I'm not getting anything like a reconstruction of my original project - which I'd settle for.
I begin teaching a class that uses this software, among others, in January. I'm considering telling the kids to download Audacity and use that instead.
Mark

Soundbooth quit, but running in the background

Has anyone ever quite Soundbooth, yet hours and even days later found that it is running in the background in windows? I have windows 7, with a dual core processor, and the last time I had soundbooth on was 18 or so hours ago, yet right now using the windows task manager, I can see that soundbooth is taking up a full 50 percent of one of my cores processess. (It ISN'T on in running applications). And this is the first time I've found this happening...
I couldn't find any articles about this so I wasn't sure if it's just a weird glitch happening to me...

D'oh!
I meant to say this ISN'T the first time I've found this happening; it's like the fifth...
(And I also know "quit" shouldn't end with an "e")

No connection between soundbooth and extendscript toolkit 2

I would like to control soundbooth using extendscript toolkit 2. From extendscript I can make a choice to connect to extendscript toolkit 2 itself, to Bridge CS3 and to Soundbooth CS3.
Bridge and Extendscript connections work OK but conncetion to Soundbooth does not work. I can start Soundbooth from Extendscript but then it hangs trying to make a connection.
Working under Windows XP service pack 2, dutch
leo

See Here...
Device Not Recognised
http://support.apple.com/kb/TS1538
And Here
iPhone, iPad, or iPod touch not appearing in iTunes
iPod appears in Windows but not in iTunes
Also, Here...
Unable to Update or Restore
http://support.apple.com/kb/HT1808

Soundbooth cs3 wont open in OS X.6.2

I recently upgraded to MAC OS 10.6.2 and found that Soundbooth CS3 gives me an error message when I try to open. The message is that "SoundBooth cannot open at this time. It must be repaired by first uninstalling and then reisntalling Soundbooth."
I uninstalled and reinstalled Soundbooth and re-downloaded the the OSX 10.5 patch. Any suggestions on how to get Soundbooth to launch? I need to get the CS3 version to open so I can upgrade to CS4.

I posted library pro file etc to desktop but it wont stop asking each time. big pain!
What else have you already tried, other than removing the ProAppSystemID?
Did you try that as described here? Re: Aperture requires the serial number each time
And did you
When did this problem start? After migrating your system to a new computer? In that case reinstall Aperture - Pro applications do not migrate well. And enter the serial number from an administrator account.
Regards
Léonie

How do I convert a .cda to .wav in Soundbooth CS4?

I have just installed the Premiere CS4 production suite which includes Soundbooth CS4 v 2.0.1.
With earlier versions of this suite (Premiere and Audition rather than Soundbooth), I could open .CDA (music cd) files in Audition and convert them to .WAV files and then import these into Premiere. It was a frustrating two step process, but at least it worked.
Now, with the CS4 suite, it is not letting me import any .CDA files (error message says the file format is not supported) to either Audition or Premiere. I even tried going through Encoder, but that doesn't work either.
How in the world are we supposed to bring in music from a CD? This should have been resolved so we don't have to go through the Soundbooth step. But now it won't even let me do that! Adobe sure is turning out to be very frustrating!!

The artwork in the PDF might already be a vector graphic.
If not you need to trace it either automatically or manually

Can't Edit in Adobe Soundbooth

Hi everyone,
I have run into a problem...
When I select "edit in adobe soundbooth", then change my audio, quit soundbooth (saving work), then the modified audio is now in my audio track, and also as a separate file in the project panel. Super.
BUT, if I need to adjust my audio again, the "Edit in Adobe Sounbooth" option is no longer available.
Are my eyes decieving me?
Please help.

Thanks Joe,
That's helpful... I think.
But it makes no sense to me... why not just *always* have "Edit in Adobe Soundbooth" available...?
In essence, Adobe has created a "Edit in Soundbooth... but you only get one shot at it" tool (without resorting to the other less direct method you describe).
It's rather disappointing
Now, I notice that I have the "Edit in Soundbooth" option available for this audio file as it is presented in the Project pane... can I launch the soundbooth session from there, and get the results you describe? Or must I go into windows explorer, locate the file (no idea where it is, frankly), and then launch Soundbooth from there?
There is a distinctly unprofessional feel about this situation.
(sorry, I'm new to Premiere)

"Edit in Soundbooth" is grayed out. Am I out of luck?

Is there any way at all for me to use Soundbooth to edit audio in Captivate 5? I purchased the CS4 suite with Soundbooth separately from Captivate 5 and the button in the audio edit window in Captivate to edit with Soundbooth is grayed out. Am I out of luck?

Hi there
When you right-click the audio clip in the library, isn' the generic "Edit with" an option as shown below?
Click image for larger view
You then browse to whatever editing application you like and edit.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

PP 5.1 Spur in Soundbooth abmischen u. wieder als 5.1 ausgeben

Similar Messages

Maybe you are looking for