PP CC: Where did Estimated Time go with MP4 Rendering?

I'm exporting a MP4 file, not using Media Encoder, just Make Movie from Premiere CC.
Every version of PP previous to CC used to tell me an estimated time remaining. Now it just says the % and Pass 1 or Pass 2.
Where is Estimated Time Remaining?

I don't recall Export ever giving that info, only AME.

Similar Messages

  • Dbms_lob , where did my time go ?

    Hi all
    After using 10046 to identify the sql that is causing the slowness in a program “ less commits cause my program to go slower” i realised that i am missing something ,
    There was a lot of time missing in the tkprof file , and no sql or wait event allocate the missing time , so i put the following test case together in an attempt to understand where the time is going .
    Version of test database : 11.1.0.6.0
    Name of test database: stdby ( :-) used my standby database)
    Database non-default values
    #     Parameter     Value1
    1:     audit_file_dest     /u01/app/oracle/admin/stdby/adump
    2:     audit_trail     DB
    3:     compatible     11.1.0.0.0
    4:     control_files     /u01/app/oracle/oradata/stdby/control01.ctl
    5:     control_files     /u01/app/oracle/oradata/stdby/control02.ctl
    6:     control_files     /u01/app/oracle/oradata/stdby/control03.ctl
    7:     db_block_size     8192
    8:     db_domain     
    9:     db_name     stdby
    10:     db_recovery_file_dest     /u01/app/oracle/flash_recovery_area
    11:     db_recovery_file_dest_size     2147483648
    12:     diagnostic_dest     /u01/app/oracle
    13:     dispatchers     (PROTOCOL=TCP) (SERVICE=stdbyXDB)
    14:     memory_target     314572800
    15:     open_cursors     300
    16:     processes     150
    17:     remote_login_passwordfile     EXCLUSIVE
    18:     undo_tablespace     UNDOTBS1More accurately I used existing example from http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4084920819312
    I hope Tom does not mind .
    create table t ( x clob );
    create or replace procedure p( p_open_close in boolean default false,
                                     p_iters in number default 100 )
      as
          l_clob clob;
      begin
          insert into t (x) values ( empty_clob() )
          returning x into l_clob;
          if ( p_open_close )
          then
              dbms_lob.open( l_clob, dbms_lob.lob_readwrite );
          end if;
          for i in 1 .. p_iters
          loop
              dbms_lob.WriteAppend( l_clob, 5, 'abcde' );
          end loop;
          if ( p_open_close )
          then
        dbms_lob.close( l_clob );
    end if;
    commit;
    end;I did the tracing and the run of the pkg with this
    alter session set timed_statistics = true;
    alter session set max_dump_file_size = unlimited;
    alter session set tracefile_identifier = 'test_clob_commit';
    alter session set events '10046 trace name context forever, level 12';
    exec p(TRUE,20000);
    exitDid the tkprof of the 10046 trace file with
    tkprof stdby_ora_3656_test_clob_commit.trc stdby_ora_3656_test_clob_commit.trc.tkp sort=(prsela,exeela,fchela) aggregate=yes waits=yes sys=yesWith output of
    OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        1      0.02       0.02          0          0          0           0
    Execute      1     46.89     147.81      38915     235267     492471           1
    Fetch        0      0.00       0.00          0          0          0           0
    total        2     46.92     147.83      38915     235267     492471           1
    Misses in library cache during parse: 1
    Elapsed times include waiting on following events:
      Event waited on                             Times   Max. Wait  Total Waited
      ----------------------------------------   Waited  ----------  ------------
      SQL*Net message to client                       2        0.00          0.00
      SQL*Net message from client                     2        0.00          0.00
      latch: shared pool                             24        0.05          0.07
      latch: row cache objects                        2        0.00          0.00
      log file sync                                   1        0.01          0.01
    OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
    call     count       cpu    elapsed       disk      query    current        rows
    Parse      117      0.11       0.10          0          0          2           0
    Execute    426      0.37       0.40          6          4          9           2
    Fetch      645      0.17       0.51         63       1507          0        1952
    total     1188      0.65       1.03         69       1511         11        1954
    Misses in library cache during parse: 22
    Misses in library cache during execute: 22
    Elapsed times include waiting on following events:
      Event waited on                             Times   Max. Wait  Total Waited
      ----------------------------------------   Waited  ----------  ------------
      db file sequential read                     19778        1.12         30.31
      direct path write                           19209        0.00          0.44
      direct path read                            19206        0.00          0.37
      log file switch completion                      8        0.20          0.70
      latch: cache buffers lru chain                  5        0.01          0.02
        3  user  SQL statements in session.
      424  internal SQL statements in session.
      427  SQL statements in session.And it’s here where the time is being lost.The time of the main pkg p(TRUE,2000) takes 147.83 sec, which is correct , but what is making this time up.
    From sorted trace file
    SQL ID : catnjk0zv6jz1
    BEGIN p(TRUE,20000); END;
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        1      0.02       0.02          0          0          0           0
    Execute      1     46.89     147.81      38915     235267     492471           1
    Fetch        0      0.00       0.00          0          0          0           0
    total        2     46.92     147.83      38915     235267     492471           1
    Misses in library cache during parse: 1
    Optimizer mode: ALL_ROWS
    Parsing user id: 81
    Elapsed times include waiting on following events:
      Event waited on                             Times   Max. Wait  Total Waited
      ----------------------------------------   Waited  ----------  ------------
      latch: shared pool                             24        0.05          0.07
      latch: row cache objects                        2        0.00          0.00
      log file sync                                   1        0.01          0.01
      SQL*Net message to client                       1        0.00          0.00
      SQL*Net message from client                     1        0.00          0.00
    SQL ID : db78fxqxwxt7r
    select /*+ rule */ bucket, endpoint, col#, epvalue
    from
    histgrm$ where obj#=:1 and intcol#=:2 and row#=:3 order by bucket
    intresting , oracle is still using the rule hint in 11g ?
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        3      0.00       0.00          0          0          0           0
    Execute     98      0.05       0.05          0          0          0           0
    Fetch       98      0.04       0.17         28        294          0        1538
    total      199      0.10       0.22         28        294          0        1538
    Misses in library cache during parse: 0
    Optimizer mode: RULE
    Parsing user id: SYS   (recursive depth: 3)
    Rows     Row Source Operation
         20  SORT ORDER BY (cr=3 pr=1 pw=1 time=8 us cost=0 size=0 card=0)
         20   TABLE ACCESS CLUSTER HISTGRM$ (cr=3 pr=1 pw=1 time=11 us)
          1    INDEX UNIQUE SCAN I_OBJ#_INTCOL# (cr=2 pr=0 pw=0 time=0 us)(object id 408)
    Elapsed times include waiting on following events:
      Event waited on                             Times   Max. Wait  Total Waited
      ----------------------------------------   Waited  ----------  ------------
      db file sequential read                        28        0.02          0.12
    SQL ID : 5n1fs4m2n2y0r
    select pos#,intcol#,col#,spare1,bo#,spare2,spare3
    from
    icol$ where obj#=:1
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        2      0.00       0.00          0          0          0           0
    Execute     19      0.03       0.03          0          0          0           0
    Fetch       60      0.00       0.04          1        120          0          41
    total       81      0.04       0.08          1        120          0          41
    Misses in library cache during parse: 1
    Misses in library cache during execute: 1
    Optimizer mode: CHOOSE
    Parsing user id: SYS   (recursive depth: 2)
    Rows     Row Source Operation
          1  TABLE ACCESS BY INDEX ROWID ICOL$ (cr=4 pr=0 pw=0 time=0 us cost=2 size=54 card=2)
          1   INDEX RANGE SCAN I_ICOL1 (cr=3 pr=0 pw=0 time=0 us cost=1 size=0 card=2)(object id 42)
    Elapsed times include waiting on following events:
      Event waited on                             Times   Max. Wait  Total Waited
      ----------------------------------------   Waited  ----------  ------------
      db file sequential read                         1        0.04          0.04None of the parse , execute ,fetch and wait times makes up the 147.83 seconds.
    So i turned to oracles trcanlzr.sql that Carlos Sierra wrote and parsed the same trace file to find the offending sql .
    And it starts getting intrestting
    Trace Analyzer 11.2.6.2 Report: trcanlzr_75835.html
    stdby_ora_3656_test_clob_commit.trc (6970486 bytes)
    Total Trace Response Time: 148.901 secs.
    2009-MAY-03 20:03:51.771 (start of first db call in trace).
    2009-MAY-03 20:06:20.672 (end of last db call in trace).
    RESPONSE TIME SUMMARY
    ~~~~~~~~~~~~~~~~~~~~~
                                              pct of                  pct of                  pct of
                                    Time       total        Time       total        Time       total
    Response Time Component    (in secs)   resp time   (in secs)   resp time   (in secs)   resp time
                        CPU:      47.579       32.0%
              Non-idle Wait:       0.467        0.3%
         ET Unaccounted-for:     100.825       67.7%
           Total Elapsed(1):                             148.871      100.0%
                  Idle Wait:                               0.001        0.0%
         RT Unaccounted-for:                               0.029        0.0%
          Total Response(2):                                                     148.901      100.0%
    (1) Total Elapsed = "CPU" + "Non-Idle Wait" + "ET Unaccounted-for".
    (2) Total Response = "Total Elapsed Time" + "Idle Wait" + "RT Unaccounted-for".
    Total Accounted-for = "CPU" + "Non-Idle Wait" + "Idle Wait" = 148.872 secs.
    Total Unccounted-for = "ET Unaccounted-for" + "RT Unaccounted-for" = 100.854 secs.{font:Courier}
    {color:red}
    {size:19}100.825 seconds Wow , that is a lot 67.7 % of the time is not accounted for {size}
    {color}
    {font}
    I even used TVD$XTAT TriVaDis eXtended Tracefile Analysis Tool with the same conclution .
    {font:Courier}
    {color:green}
    {size:19}Looking at the raw trace file i see a lot of lines like this{size}
    {color}
    {font}
    WAIT #7: nam='direct path read' ela= 11 file number=4 first dba=355935 block cnt=1 obj#=71067 tim=1241337833498756
    WAIT #7: nam='direct path write' ela= 12 file number=4 first dba=355936 block cnt=1 obj#=71067 tim=1241337833499153
    WAIT #7: nam='db file sequential read' ela= 1095 file#=4 block#=399 blocks=1 obj#=71067 tim=1241337833501366{font:Courier}
    {color:green}
    {size:19}
    What is even more interesting is the sql for "PARSING IN CURSOR #7" is not in the trace file !
    The question is where is the time going or is the parser of the 10046 trace file just not putting the detail in ? How do i fix this, without speculating, if I do not know where the problem is ?
    I thought of doing a strace on the process . Where else can i look for my 100 sec
    Please point me in a direction where i can look for my 100,825 seconds as this is a test case with a production system that is loosing the same amount of time but with a lot more sql arround its dbms_lob.writeappend.
    {size}
    {color}
    {font}
    Edited by: user5174849 on 2009/05/16 11:17 PM

    user5174849 wrote:
    After using 10046 to identify the sql that is causing the slowness in a program “ less commits cause my program to go slower” i realised that i am missing something ,
    There was a lot of time missing in the tkprof file , and no sql or wait event allocate the missing time , so i put the following test case together in an attempt to understand where the time is going .
    Version of test database : 11.1.0.6.0
    What is even more interesting is the sql for "PARSING IN CURSOR #7" is not in the trace file !
    The question is where is the time going or is the parser of the 10046 trace file just not putting the detail in ? How do i fix this, without speculating, if I do not know where the problem is ?
    I thought of doing a strace on the process . Where else can i look for my 100 sec
    Please point me in a direction where i can look for my 100,825 seconds as this is a test case with a production system that is loosing the same amount of time but with a lot more sql arround its dbms_lob.writeappend.I guess that the separate cursor that is opened for the LOB operation is where the time is spent, and unfortunately this part is not very well exposed via the usual interfaces (V$SQL, 10046 trace file etc).
    You might want to read this post where Kerry identifies the offending SQL via V$OPEN_CURSOR: http://kerryosborne.oracle-guy.com/2009/04/hidden-sql-why-cant-i-find-my-sql-text/
    The waits of this cursor #7 are quite likely rather relevant since they probably show you what the LOB operation is waiting for.
    The LOB is created with the default NOCACHE attribute therefore it's read and written using direct path operations.
    Regards,
    Randolf
    Oracle related stuff blog:
    http://oracle-randolf.blogspot.com/
    SQLTools++ for Oracle (Open source Oracle GUI for Windows):
    http://www.sqltools-plusplus.org:7676/
    http://sourceforge.net/projects/sqlt-pp/

  • I have serious reservations about yosemite. Where did the time in the upper right corner go when i open safari? Plus why is my display print lighter and harder to read? this update needs an update!!

    Yosemite is not an improvement !!!where did my clock go in upper right corner ?  some of the print is hard to read on safari ..it looks faded
    how do i get my old display back or else repair these problems?

    Yosemite is not an improvement !!!where did my clock go in upper right corner ?  some of the print is hard to read on safari ..it looks faded
    how do i get my old display back or else repair these problems?

  • Where did the time zone selection go when making an event in Calendar?

    So in iOS5 and iOS6 there was an option to select the time zone the event was going to be in when creating it in the Calendar app.
    Now in iOS7 it appears it is no longer there unless you turn time zone support ON.
    I want to be able to have time zone support OFF like I had in iOS5 and 6 and still have the time zone selection option when creating events.
    I'm at a loss for why this option was removed. Is there any way to get this back? My coworkers are having issues creating meeting events when out on the road and figuring out the right time zone +/- when moving between time zones.

    You can middle-click a tab with the mouse scroll wheel to close that tab.
    Did you try Save mode to be sure that it is not caused by an extension or theme?
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    You can also check:
    * http://kb.mozillazine.org/browser.tabs.closeButtons (1)
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • HT3275 where did my time machine back up go to on new hard drive?

    Hi, I recently had hard drive fail on my late 2006 iMac.  Had a new hard drive installed.  Restored my computer from the most recent time machine back up from my external drive, but can't find restored data on iMac.  Any ideas?
    Went to the latest backup and hit 'restore' took about 2.5 hours for the data to transfer to new hard drive.  I can tell it's chewing up the new hard drive space but the data/profile from my old mac is nowhere to be found on the new hard drive.

    It might have created a new user and loaded under that.. new user being the old user. But if you have issues do it again, only this time pick where the backup will go.
    http://pondini.org/TM/16.html
    The other questions might also be relevant as a new hard disk will make the Mac appear to the TM backup as a new computer.
    See 14-18 for restore info.

  • Where did Quick Time Pro 7 go?

    I downloaded the program and it was verified in Control panel that it loaded. I am not able to find it anywhere on my computer. I can find Quick Time, but not Pro 7. Where would it be located?

    I'm not sure if this helps but after installing Snow Leopard, I was Option + Opening a video file and it gave the the option for Quicktime 7 which I could not find in my Applications folder. I didn't even realize it was still on the computer after the OS upgrade. I looked in the Utilities folder and there it was.
    Try there.
    -Frank

  • Where did my Time Machine backed up files go?

    I frequently back up my MacBook Pro to an external hard drive using Time Machine. When I am no longer using files I've backed up I delete them from my MacBook Pro and leave them on the backup disk in case I need them later on. The last time I backed up my MacBook Pro Time Machine told me (after it had already deleted the old backups) that my backup disk was full so it had deleted some old backups to make room for the new backup. This seems crazy to me but ok on this forum: http://pondini.org/TM/C4.html it indicates that Time Machine doesn't actually delete the old files, it just deletes everything in the old backup that isn't backed up on another one of the backups. Ok whew. But now I cannot find the old files that were on the deleted backups, but not backed up on any of the other backups, anywhere on my backup disk. Where do they go?
    Would appreciate some help as these were critical archival files and it's hard for me to believe that Apple would create a product that simply deletes saved information without asking first.
    Thanks.

    As Eric says Time Machine is designed to recover the disk drive to its current condition. So if you delete files then they become candidates for deletion by TM when it needs disk space for new backup.
    If you do not wish that to happen then you must not use TM but copy them to another to an archive disk drive without using TM. You can then have TM backup your achieve drive so that the data on it is protected.
    This archive drive can not be the same one that TM is using or else you can do a backup of the archive data for protection.

  • Where did the time display go and why is the screen stuck on master track? Thanks.

    My time display disappeared and the screen is stuck on master track. Any ideas? Thanks.

    If the GarageBand application window appears to be messed up, parts missing, or in the wrong place, it might be a problem of corrupted preferences files. Try to repair permissions and to remove the file "Your Home Folder/Library/Preferences/com.apple.garageband.plist" from your user library.
    See HangTime's fix for "oddball problems":
    http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    Is your profile signature "GarageBand '09, Mac OS X (10.5.8)" still current, John? If not, and you are now using Lion or Mt. Lion, the User Library will be hidden.
    Then you can reveal it from the Finder's "Go" menu:
    Finder > Go,   then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences" sub folder and remove com.apple.garageband.plist.
    Regards
    Léonie

  • Hi all, my first time on.  I shared my imovie project to Media Browser.  Fine.  Then after it downloaded it 'disappeared.'  Where did it go?  Having found it, how do I then share it with idvd?  I am told the image quality will be much better this route.

    Hi all, my first time on.  I shared my imovie project to Media Browser.  Fine.  Then after it downloaded it 'disappeared.'  Where did it go?  Having found it, how do I then share it with idvd?  I am told the image quality will be much better this route.

    Hi
    I do
    • In iMovie - select a project
    • Share to Media Browser and as Large (not HD or other res.)
    • Close iMovie
    • Open iDVD and select to start a New iDVD Project
    • Import movie - from Media button - down to the right - and here from Movies
    Yours Bengt W

  • How to burn a video produced in iMovie in iDVD: with gratitude for the advice received I used the "professional quality" setting in iDVD for a video which in iMovie is 1h 20min long.  however this also failled. where did I go wrong, please?

    how to burn a video produced in iMovie in iDVD: with gratitude for the advice received I used the "professional quality" setting in iDVD for a video which in iMovie is 1h 20min long.  however this also failled. where did I go wrong, please?
    the message sked me to alter the quality of the DVD as the content was too large for the quality sellected.
    PLEASE HELP again,
    THANK YOU VERY MUCH
    MIchael

    Check the Advanced ➙ Project Information menu option to make sure the playing time of the entire project, movie plus menu is below the 120 minute limit.
    OT

  • Where did the iPhone Calendar list function(s) go with iOS7? The Calendar has gone all 'spread sheet' on me and definitely not user friendly. Please advise.

    Where did the iPhone Calendar list function(s) go with iOS7?  The Calendar has gone all 'spread sheet' on me. If you select an item (grey dot) from the month display it will open up the 'spread sheet' at the current time of day, not necessarily when the calendar entry takes place.  I liked iOS6 where you could turn your iPhone to landscape mode and get that special 'spread sheet' feel if that's what you're into.  Has a 'List' presentation been removed from the iPhone Calendar with iOS7?

    The List view is displayed by tapping the Search magnifying glass.

  • HT201365 When I upgraded my iPhone 4s to IOS7, I lost all my app icons. Where did they go? Interestingly they are still listed in notifications and I could play words with friends when I got a message on the home screen that it was my turn (but still no i

    When I upgraded my iPhone 4s to IOS7, I lost all my app icons. Where did they go? Interestingly they are still listed in notifications and I could play words with friends when I got a message on the home screen that it was my turn (but still no icon)

    Hey linfrommi,
    Thanks for the question. I understand that you are having trouble locating some application after the update to iOS 7. To troubleshoot this issue, let’s reset the home screen layout of your iPhone, which should move all of your applications to the second “page”:
    Reset iPhone settings - iPhone
    http://help.apple.com/iphone/7/#/iph7a2a9399b
    Reset Home Screen Layout:  Returns the built-in apps to their original layout on the Home screen.
    Thanks,
    Matt M.

  • Before I downloaded Lion every time I would upload a pic from iphoto there would be two files.  One that was 1.8MB and another that was 50KB.  Now I can only find the 1.8MB one.  Did this option disappear with Lion?

    Before I downloaded Lion every time I would upload a pic from iphoto there would be two files.  One that was 1.8MB and another that was 50KB.  Now I can only find the 1.8MB one.  Did this option disappear with Lion?  I really need this option!

    Sorry but this is not clear.
    When you would "import" what?
    two files would show up in "images".
    Do you mean in the All Images search in the Finder?
    IF so:
    1.Never interact with photos that are in iPhoto via the All Images Search. This does not understand the iPhoto Library and it's very, very easy to damage the library this way.
    2. What you were seeing was the original file you imported and the thumbnail created by iPhoto for viewing on the iPhoto Window. That thumbnail is not designed for user access.
    What are you trying to do ultimately?
    Regards
    TD

  • Where did this backup window come from on my desktop.  I have always used time machine to backup to an external disc and within the last 2 weeks, this backup window keeps appearing.  Where did it come from?  Thanks for any help

    where did this backup window come from on my desktop. It specifies personal data & settings and tells me when the next backup is scheduled [which I never set up].   I have always used time machine to backup to an external disc and within the last 2 weeks, this backup window keeps appearing.  Where did it come from?  Thanks for any help

    To check your S.M.A.R.T status open disk utility and click on your drive and then click on the info icon.

  • HT1222 Just bought a ipad mini with retina. On my settings page its showing ios7.0.4 software update. "Estimating time remainin..." but doesn't seem to complete update. This message has been showing since last evening. How can I end or complete this opera

    I just bought an ipad mini with retina display. On my settings page it shows an update occurring for ios.7.0.4 with the message "Estimating time remaining..."
    This update and message appeared last evening but doesn't seem to complete. It also says "downloading", but nothing is happening.
    How can I complete the download or eliminate it?

    If it's slow on startup it would be extensions loading or LaunchDaemons starting up. 
    You should have a look in:
    /Library/LaunchDaemons
    /Library/Extensions
    You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. 

Maybe you are looking for