PP cs2 timeline goes black when i render

i created a project and sequence with avi files. the edit went smooth but when i rendered the timeline the video went black. audio was fine. also when i encoded it as a wmv it was fine.
i'm on vista 64. never had this problem before. do i need a special codec?

For starters, if the export comes out fine, I say don't worry too much about it. Rendering isn't required most of the time.
As to why this may be happening, where did you get the AVI files?

Similar Messages

N95 screen goes black when in between open and clo...

Just noticed today that the screen goes black when sliding open or closed. Screen comes back on when slider reaches open or closed. Is this like the blank screen fault that affected so many N80s ? I'm very disgusted that I have to pay to fix my 16month old (expensive) N95 for an ongoing issue with Nokia sliders that they HAVE NOT fixed in their design. Very poor support Nokia.
Nokia 808
Nokia CK-200

Scott your grieviences are justified... but there is always a solution to a problem...even if this is a strange problem to be handled in an off the routine way, be it so... once again best of luck! not blame nokia for anything...nokia rules as always and nokia's productions have become very slow now :-( i wish they could make trendy phones like sony, sleek and stylish with new features.in some ways, nokia gets a little boring with no new features.. i dont feel any differnce between the nokia n95 8gb, n96 and n85(which i currently own)!
Scott lets hope for the best :-)
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

Screen goes black when coming out of screen saver. HP Pavilion,p7-1414 desktop, windows 8

the monitor shows the windows 8 screen with the apps, then the screen saver will come on. Then when I try to bring it out of the screen saver mode the screen goes black and nothing I do will get it to go back to the windows 8 screen. Then the mouse pointer will disappear. So I end up having to shut down the computer using the power button. If I have the screen set up for the old style windows 7 and it goes into the screen saver and I bring it back there's no problem.
fleamarketlady

Hello fleamarketlady,
Your computer goes black when it comes out of sleep mode some times.
Make sure that you are only using one cable to connect the monitor to the computer.
Open up command prompt and run the following command SFC /scannow.
This will scan the system files and correct any errors that it can.
Here is a link to command prompt.
When you go to open command prompt, right click and run as administrator.
If you are still having the problem you can perform a system refresh.
This will uninstall windows 8 and reinstall it without affecting your personal information.
Here is a link that will walk you through the steps for a refresh.
Let me know how everything goes.
Have a good day.

I'm using CS6 created a new document. trying to use my layers and my work keeps going black. when I

I'm using Photoshop CS6, created a new document. trying to use my layers and my work keeps going black. when I click on the workspace i am able to see my work but when I move my mouse any little bit it goes black again.

Good day!
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Regards,
Pfaffenbichler

Macbook Pro 15" 2010 display goes black when opening PPT

My Macbook Pro 15" 2010 main and secondary display goes black when opening some PPT documents when connected to an external monitor. Has anyone else experienced this issue and if so, what was the solution?
What I have:
2010 Macbook Pro with Snow Leopard (all latest updates)
Office 2011 - with all latest updates
Acer 24" monitor (all attached monitors go black)
Thanks for the help in advance and let me know if I can provide any additional information.

My Macbook Pro 15" 2010 main and secondary display goes black when opening some PPT documents when connected to an external monitor. Has anyone else experienced this issue and if so, what was the solution?
What I have:
2010 Macbook Pro with Snow Leopard (all latest updates)
Office 2011 - with all latest updates
Acer 24" monitor (all attached monitors go black)
Thanks for the help in advance and let me know if I can provide any additional information.

IPhoto going black when using the contract tool

my picture goes black when im trying to edit using the contrast tool!
what the heck.. any advise?

Do the other tools work correctly in the edit mode? Try the following: delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. If that doesn't help launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Premiere CS4 timeline goes black - refresh problem?

Every time I try to edit in premiere pro CS4, after a while (or straight away) the timeline goes black. Everything around the clips (not including the clips) goes black and I can see anything on the timeline except the clips. If I move the timeline off the screen and back on it refreshes normally? This problem in intermittent by persistent. I have done all the updates for premiere and my graphics card.
My system is:
OS: Win7 64Bit
Intel core i7 920
6GB Ram
ATI HD5770 1GB GDDR5
C drive is 200GB SATA1
Thanks

Hi,
I had an almost identical problem.
Windows 7 64bit
Premiere Pro CS4 4.2.1
Cineform neoscene
Nvidia GT240 (latest driver 257.21)
Premiere pro would work fine until I loaded up internet explorer, then the timeline would go black as soon as I dragged a clip around. I needed to completely log out of windows to get the timeline visible again after moving a clip.
I switched to firefox, but that had the same effect.
However I then tried the seamonkey browser and premiere now works fine!
Hope this helps.
Kerrin

My iPod touch goes black when I try to face time. Can anyone help with a fix.x

My iPod touch goes black when I try to use FaceTime. Can anyone help.x

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>FaceTime and sign out and then sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Display goes black when in a call

I have noticed an annoying feature with my Nokia N8: The display goes black when in a call (holding the phone to my ear). When the call is finished I have a difficulty to close the call. Is this a Nokia special feature for saving battery that can be turned off or is it an error?
Solved!
Go to Solution.

Hey Is1987Is! Sorry you are having this problem.
It is normal behaviour for your screen to go black when held near your ear.
Is your screen just not coming back on once you finish your call or take it away from your ear?
Incase it is a bit more of a serious case of your phone having a black screen after hanging up a call. You can try this troubleshoot.
To make sure your proximity sensor is not over sensitive causing your phone to have a black screen, during incoming and outgoing calls aswell as alarms.
First thing is try to verify sunlight/IR oversensitivity with a typical desk lamp.
This could be done by making a phone call (or setting alarm) and putting the phone under the desk lamp when the phone is ringing (or alarm activated).
If phone is oversensitive to IR, display should go blank caused by IR radiation from desk lamp.
If this is the case you should take your phone to your Local Nokia Care Point, and they will be able to fix it for you!
I hope this helps, let me know if your phone goes black screen during an incoming calls when you test it under the lamp!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

Why is the display going black when editing in FCP X?

Here's a tough one that the Genius Bar couldn't make heads or tails of:
I'm using FCP X to edit some videos, as I have for a few years now. Upon launching Final Cut Pro it loads my timelines etc as it always does, but sometime soon after (either while waiting for background tasks to run, or when click on an event) the screen goes black. I've replicated the same problem with multiple external drives, projects, etc.
And yes, I have uninstalled and reinstalled FCP X following the specific instructions on the Apple.com website. No such luck. Taking it to the Apple Store resulted in a lot of head scratching, confirmation that something is definitely wrong, and a then this Support Forum question.
Anybody heard of something as bizarre as this? I'm hoping so. Thanks.
My Gear:
MacBook Pro w Retina Display
OS X Mavericks 10.9.2
Final Cut Pro X 10.1.1
multiple external drives (Lacie, WD, etc)

What do you mean by saying the screen is going black?
Do you mean the whole monitor or just the Viewer in FCP X?
Try these general troubleshooting strategies even if you've already done them.
Use this free app to trash the preferences. This should be the first thing you try when any problems occur.
http://www.digitalrebellion.com/prefman/
2. Open Disk Utility and Repair Permissions.
3. Trash FCP X using this free app and reinstall it.
http://www.digitalrebellion.com/fcsremover/
If these 3 measures don't work, create a new User Account (Admin) in System Preferences and try running FCP X from that as it sometimes works miracles.

Screen goes black when hooking up to TV via mini-DVI to video adapter...

Hello,
Ever since I upgraded my PB12" to 10.5.x (now running 10.5.5, but this issue has been there since upgrading to 10.5.1), when I hook up the mini-DVI to video adapter (different adapter than for hooking up to an external display as the mini-DVI to video adapter has composite and sVideo out) to my TV, the PB screen goes black. It's set up to mirror the PB on the TV, and the PB continues to run, picture works on the TV, but I loose picture on the PB. Only way to get it back is to reboot the PB (with the mini-DVI to video adapter unplugged). So, basically, if I try and use the mini-DVI to video adapter, I loose picture on the PB. This never happened under 10.4.x — only since upgrading to 10.5.x.
Anyone have this issue? Know of a fix?
Thanks,
Kristin.

If you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.
If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that can combine video and audio to HDMI.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

My laptop screen goes black when i plug in an Hdmi cord

Initially I had both my tv and computer off. I connected the dvi to the tv and the hdmi to the laptop and turned them both on. I had no issue using my laptop as i tried to sync the computer to the TV. However i must have accidentally hit something in the graphics options as my laptop screen went black. I unplugged the hdmi cord from my laptop and the screen came back up. But now for some reason everytime i plug in the hdmi cord to the laptop the screen goes black. When i take it out it the screen comes back up. Did i change something that is causing this to happen? Any help would be greatly appreciated. Thanks

I have pretty much the same exact problem and setup as DaveA1. I have a Toshiba Satellite Laptop C55T-A5123 which I just purchased a few months ago and when I connect my laptop to my SONY TV via the HDMI cable the screen on my laptop goes black and the TV says no signal. It was working just fine up until about a week ago when I was watching a movie through my VLC player and then the screen flickered a couple times then video went completely out and I've never been able to get it to come back even once.
Here's the specs on my laptop:
http://www.newegg.com/Product/Product.aspx?Item=N82E16834114907
So far I have tried on two different TVs, swapped HDMI cables which work on my other HDMI devices, system restore and attempted to update various different drivers. I am curious to find out if Dave was able to find a solution to his problem.

Satellite L405D-11V - Freezes and screen goes black when watching video

Ok, so I have the Toshiba Satellite L405D-11V, I have had a fault, basically, the computer would freeze at any time and the screen would go black, with the fan and lights still going, this could be on start-up, or a few hours into using the laptop, so I decided to ring up Toshiba's tech support and they arranged for my laptop to be collected and sent off for repairs.
I was able to track the repairs online through the tracking service, and was able to see what they were doing to my laptop, it said that they ordered a part, it was in progress and the repairs were finished.
However, I got the laptop back today, I turn it on, everything is fine, I start using the laptop everything is fine, then I decide to watch a video on youtube, and it freezes again, so, I power off holding down the power button, hoping it was just a one off, I turn it back on, and load up the video again, it freezes and the screen goes black again, after working out that when ever I watch a video or play a game, it causes the computer to crash and freeze like before the repairs. So there is still a fault, but im not sure what to do
Its still under warranty, I purchased the laptop from Comet, but I dont really want to send the laptop off for repairs again and to find it will come back with the same fault, is it worth sending it off again, perhaps seeing if comet will replace the laptop as its still under a year of buying the laptop, or is it just gonna be worth saving all the hassle and buying a new laptop? If this fault has happened to anyone else, I could sure use some help, and if someone could shed a little light as to what might be wrong?
Thanks

Hi buddy,
Did you change something on configuration after you got your notebook back from repair? Did you update a driver or something else?
What operating system you are using on your Satellite L405D?
To be honest its really hard to say why it happens because the technicians test everything to check if your notebook runs properly.
In my opinion you should try updating the display driver. Maybe its causing the issue
If not I would recommend installing Windows from Toshiba recovery disk to restore factory settings. These settings are pretested by Toshiba and should work.
If you still have the problem you must contact the technicians again. I mean you could track the repair online and according your posting everything worked well during repair so in my opinion it shouldnt be a problem to contact the guys exactly.
Explain your problem very detailed. I think everything can be clarified then. :)

PB screen goes black when TV is plugged in

I occasionally plug my PB G4 12" into the TV using the Video Adapter. This used to work fine - the desktop would span both TV and PB screen, just as it does when I have my external monitor plugged in.
But when I upgraded to Leopard this stopped working - when I plug the TV in, the PB screen goes black 90% of the time. And when I unplug the TV the PB screen stays black - I always have to shut the laptop down while the TV is plugged in and start it up once the TV is unplugged. But the PB still works fine when I plug an external monitor in.
Any ideas how to make this work again? Thanks.

Hi MrEleffe,
Welcome to the support community!
To fix any possible software issue that may be causing this to happen, please try to first back up all your data using the BlackBerry® Desktop Software and then perform a clean reload of your BlackBerry® Device Software. For further steps, please see the following KB articles.
For Windows®:
"How to back up BlackBerry smartphone data using BlackBerry Desktop Software for Windows" KB12487
"How to perform a clean reload of the BlackBerry Device Software for Windows" KB11320
For Mac:
"Back up and restore BlackBerry smartphone data on a Mac computer using BlackBerry Desktop Software" KB18776
"Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" KB19915
Please test to make sure the issue has been resolved before restoring your backup file.
If that doesn't help, then the issue may be hardware related. In that case I recommend contacting your mobile network provider again for other options.
Please let me know how you make out with that.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

PP cs2 timeline goes black when i render

Similar Messages

Maybe you are looking for