PP CS3 vs PP CS4 for RT previews?

I think the RT playback setting options of PP CS3 are better than what we have in CS4. I had much more RT and the images looked smoother on an NTSC monitor when I opted for Accelerated GPU Effects in PP CS3. I see that you can select an HDMI or even an S-Video out put as the external device during RT previews using PP CS4 but the way it works now I get interlacing artifacts and odd flashes of green and white when using transitions, text titles or even PIPs with motion paths. I think the old method of PP CS3 played the VGA overlay and relied on the GPU to interlace the overlay to the NTSC monitor. I think PP CS4 tries to interlace the actual video codec of the clip to the HDMI/S-Video port during the RT preview instead of letting the GPU convert the overlay. With PP CS4 I can have the NTSC monitor preview look good or the VGA preview look good but not both. I had to realy tweak the setting of my graphics card using PP CS4 unlike the easier method of PP CS3. I see the icon to inable or disable rendered areas during RT previews is gone (Icon by the marker icon in the timeline panel).
Another thing I liked better about PP CS3 is the fact that the video card CC settings did not affect the RT previews of PP CS3. In other words I could drain the monitor images to black and white using the video cards color correction settings but it did not affect Premiere's video clips at all. CC had to be done using Premiere's CC (better method I think). Now the color calibrations made with the graphics card does affect the Premiere Pro RT playback.
I don't have PP CS4 I only used the demo. I liked things the way they were. What do you folks think of PP CS4 VS PP CS3 for RT previews?

Is this what you want to hear?
Your system is maybe to slow and your video card is outdated. CS4 has more GPU acceleration than CS3. In fact Adobe has said it that Cs4 is optimized for Vista 64 and a quad core and at least 4 gigs of RAM 'are recommended'.
Your computer specs are a few years outdated so CS3 will be faster than CS4 on our computer.
That is a fact. If you would have given your computer specs when first asked we could have cleared this up.
If I'm wrong someone will correct me. You need to update your video card badly if you want to use CS4.
There is your answer. Newer versions of software tend to require more updated computers. This is how things work. Does this answer your question?
Jim,
I'm speechless. You won't upgrade out of moral principal because you don't like the company that created the internet installer? I'm speechless man. You want me to buy you a dvd of the trial? I will if you can't afford it. email me your address if this is the case. [email protected] Your smart and you could help out alot here if you just tried the software instead of just going by what you read on forums to give people advice.

Similar Messages

  • CS3 reinstall problem - asking for uninstalled CS4 beta

    I have a PowerBook G4 with 1.5 Gb RAM running Mac OS 10.4.11. I have the CS3 Suite installed and last year downloaded a beta copy of Fireworks CS4. After using it a bit, I uninstalled Fireworks CS4 with the Adobe uninstaller.
    I recently had a problem with Bridge and decided to uninstall and reinstall the software. I uninstalled Photoshop CS3 (in order to uninstall Bridge) and when I began to reinstall Photoshop, the installer ask me to insert the Fireworks CS4 disk! Since I don't have that disk, I hit cancel and the install terminated (I tried this multiple times and rebooted each time)
    I then downloaded and ran Adobe's CS4 Cleanup app. It found NO CS4 apps to clean up.
    Any suggestions would be appreciated.
    Mark

    Thanks Neil and Buko for your input. Here's where things stand now:
    1) I uninstalled FW CS4
    2) I uninstalled CS3
    3) I ran Cleanup Script
    4) I repaired permissions using Disk First Aid
    5) I reinstalled CS3
    The problems with Bridge remained (sluggish, won't display icons properly, won't show a preview image, won't operate the folder list, etc.).
    So I called Adobe support. Unfortunately, because I am having problems installing CS3 and NOT CS4, support is NOT FREE. The rep was helpful though -- she pointed me to document number 331594 (Diagnosing Bridge problems) and told me to start there. I followed EVERY step . . . disable start-up scripts, reverted to original preferences, cleaned up the cache, disabled the folder windows, and the problems remain.
    Guess I'll have to pay . . .
    Lesson learned: don't trial Adobe software. That's when my problems began.

  • Dreamweaver CS3 instead CS4 for optimization on older hardware . . .

    Dreamweaver CS3 instead CS4 for optimization on older hardware . . .
    I do design for print and every year more and more customers have asked me if I would design their web site after I have designed their brochures and other collateral. For the last nine years I have never found the time to learn web production. I purchased Adobe PageMill and then upgraded to Adobe GoLive 5 but I have never found the time to learn these programs. But lately, requests for web design have persisted. I downloaded the trial version of Dreamweaver CS4 but it is too slow on my 1.25 GHz MDD Dual G4, running Mac OS 10.4.11.
    So I purchased the Dreamweaver CS3 upgrade, which was still available from Officemax.com. I also purchased "Dreamweaver CS3: The Missing Manual" by David McFarland. I'll be going through the tutorials on weekends trying to become functional with Dreamweaver.
    I'll be using it in WYSIWYG mode and not as a HTML coder.

    I would have been happy to make DWCS4 my first step up to Dreamweaver but with it not officially supported on G4 Macs and all the menus at the top running way too slow, I needed to stick with what is officially supported for the G4 by Adobe, Dreamweaver CS3.
    It is possible that future updates of DWCS4 will be more optimized and do OK on my G4. It is also possible that running my outdated version of Font Reserve 3.1.4, under Mac OS 10.4.11, is slowing down the menus on DWCS4 on my machine even Acrobat 7 Pro gives me slow menus with my current set up.
    InDesign CS3 is fast enough on my system and IDCS4 runs just as fast as IDCS3 on my Dual MDD G4.
    I don't think I will be getting an Intel-Mac desktop and laptop until 18 months from now.

  • DC CS3/CS4 for HTML testing

    Hey, Everyone -
    We're new to DC, but eager to make it part of our workflow.
    Can I use Device Central CS3 or CS4 to emulate the native browser
    of the profiled phones to test our HTML pages? Sure, I can surf the
    pages I have created, but is that experience the same or proximal
    to what I would find on the real phone? Does Device Central emulate
    Windows Mobile IE browser? Symbian? Openwave or Opera?
    The first question is "Can I trust the way my HTML content is
    being displayed?" We're working with some 3rd party generated code
    (Microsoft) that is not fully XHTML compliant. If it renders fine
    in DC, can I trust it?
    The second question is "Can I simulate the way our users will
    interact with our HTML content?" My web developer has created pages
    that allow the user to select links on the page by hitting a number
    key. It works on our desktop browsers, but the keypad does not work
    with our content on any of emulated devices found DC CS3.
    I'm getting the vibe that DS CS3 is really just for Flash
    Lite testing, even though it says that it integrates with
    Dreamweaver.
    Thanks in advance for your response.
    Dan

    Hey, Everyone -
    Upon further testing, I find that Device Central CS3 is not
    working with major web sites like wf.com (Wells Fargo mobile). The
    Up/Down Keys only scroll the browser window, they do not select
    hyperlinks or form fields. Otherwise, if I hit any of the numeric
    keys, the browser window in the display loses focus and no input
    occurs.
    Can anyone tell me, is this the case in Device Central CS4?
    Thanks,
    Dan

  • Photoshop CS4 no display preview for Smart Sharpen after making adjustments

    I just upgraded to Photoshop CS4 which seems to work fine except for the preview window in Smart Sharpen and Unsharp Mask. I get a preview display when using the sharping tools after I open a photo but if I make adjustments such as Levels or Curves the preview window is blank. It's recommended to sharpen a photo after all other adjustments and effects are applied. I can't see how sharp I'm making the image and if I'm getting any noise. Adobe said it was a problem with the driver with the graphics card and to call apple for an update. Apple says it doesn't have an update. Does anyone know a work around? Adobe had me throw away preferences and uncheck open GL. Neither worked.

    Hi, the Adobe forums are full of help on your issue...
    http://www.adobeforums.com/webx/.59b6ba4a
    ...L

  • When I try to reinstall my Photoshop CS3 I get asked for my P.S. CS4 disk.I don't have a CS4 disk. Why?? Thanks! Tom

    When I try to reinstall my Photoshop CS3 I get asked for my P.S. CS4 disk.I don't have a CS4 disk. Why?? Thanks! Tom

    This usually happens when you had/ have a newer Adobe product like a trial on the system and it points to updated install components. You will have to uninstall each and every bit of Adobe software and then reinstall in the proper order. Running the cleaner tool may also be required.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

  • Bridge CS4 - pdf scrambled previews on pages after page 1

    I have a set of pdf files from InDesign that have multiple pages. On these files, the first page displays fine, but on subsequent pages the preview is scrambled and I detect some overall display glitchiness while Bridge is showing me a scrambled preview.
    I understand Adobe's hooking into OpenGL hardware acceleration, so I checked preferences in Bridge CS4 for acceleration settings. I checked the "use software rendering" option in the Advanced settings, restarted Bridge and the problem disappears.
    I'm running an ATI FireGL 3400 card with the latest driver on an XP Pro machine. Not all multiple page pdfs show the problem. The files with the scrambled previews are banner layouts and several letter size page layouts display multiple page previews normally. I'd be happy to provide Adobe support with a file (under 2MB) for testing. So far Photoshop appears to be happy with OpenGL acceleration enabled - except that I get messages that I don't have enough ram to run more than two image windows accelerated with my hardware.

    I don't have CS4 but in CS3 I could get the same results as "use software rendering" as when I clicked on "restore down" (middle symbol in upper rt corner of windows screen) even though I enlarged the window to full screen.
    In maximize window mode I had several problems with the preview without software rendering, and knew my video card was weak point. I know this is not the same issue but does not cost anything to try it. Don't know why it worked either.

  • Backsaving in Illustrator CS4, for CS?

    Can Illustrator CS4 backsave so that it can be opened in CS?

    Wade_Zimmerman wrote:
    It does no need to be saved backward it can open it as is
    I have yet to get a CS4 file to open properly in CS3. I get a warning dialog, and then a blank page 99% of the time.
    The workaround for me has been to open the CS4 file in Preview (Mac OS 10.5) and save as a .pdf which then opens fine in CS3. The main problem with this technique is that there's always a page-sized clipping mask that shows up with these files and I've got to delete that.
    Saving as... CS should not not a big deal if the files aren't too complex. If you're using CS4-only effects, expand them first and convert type to outlines. (providing you don't intend to edit these elements once opened in CS)
    My experience might be limited because I'm pre-press, and never need to alter the content of client files -- just render them for printing.

  • Premiere CS3 lauch Encore CS4...

    I have installed CS4 and kept CS3 on same system (Vista x64), as I have projects ongoing under Cs3.
    Under Premiere Pro CS3, if I export to ENCORE, it now launch Encore CS4. I was used to CS3 proceeding to DVD burning after different steps. Maybe it's just a matter of learning the rope of Encore CS4, but I just wonder if a project under Premiere CS3 can effectively proceed under Encore CS4 for DVD burning ?
    When I get there, nothing happen as it was under Encore CS3... Or Am i just missing a command to burn the DVD ?
    Thanks,
    Rob

    lanstrad2008,
    Rather than fight with the linking of PP to Encore3/4, I'd look to Jim's suggestion.
    In a nutshell, you Export from PP, and then Import into Encore (of your choice). There are other ways to do this, but the fool-proof method is (assuming SD footage to DVD-Video) to:
    1.) Export>Movie and choose DV-AVI elemental stream (Video ONLY).
    2.) Export>AME and choose PCM/WAV, or AC3 elemental stream (Audio ONLY).
    3.) Open Encore (of your choice), define your Project and Import>As Timeline, your DV-AVI file.
    4.) Import>As Asset, your WAV, or AC3.
    5.) From Encore Project Panel, drag your Audio file to the proper Timeline.
    6.) Do your navigational Assets, i.e. Menus, Playlists etc.
    7.) Check Project
    8.) Preview
    9.) Let Encore set the Transcode settings for your target output, i.e. DVD-5, or DVD-9.
    Good luck,
    Hunt

  • Please help, EX1 + PremPro CS4.1 NO Preview while editing.

    So, I am wondering what is the best sequence settings for ex1 cam. I am having a ton of problems with cs4 and am thinking (PRAYING) it is a user error.
    Project: 2hr long recital where we had three Sony EX-1 cameras. All shooting 1920x1080p (HQ). And there are two shows, but I'll edit them in different projects.
    In CS3, I would start the project and just pull the footage in... no problem everything played fine. Then when I upgraded to CS4 it was CHOPPY to the point I could not edit.
    Sequence Settings: General:
    Editing Mode: Desktop. But was the EX1 1920x1080 hq by default... but that wasnt working. So far, Desktop is the only thing that has even let video show up... if I import only 25minutes of footage, it plays back smooth! NOTHING has worked like this, so is Desktop the way to go?
    Video Previews: I-Frame Only MPEG
        I really do think this is where the problem is. The video is killing me, audio plays back like a champ (if i turn off the video and press play). I dont know enough about this to know if I am correct or not. Should I do I-frame or AVI? and if AVI which Codec? Also, should i click max bit depth and render quality? i'd assume no for a preview.
    Thanks a million for any help!!!
    System
    Dual Core 2 6600 (2.4GHz)
    8 GB ddr2
    64-bit vista prem
    NVIDIA GeForce 8800GT
    1.5 TB of storage
    OS Drive is a Raptor 10k
    I am on my way to work now to get CS3 to downgrade. /sigh.

    I have a similar problem with HQ EX1 footage. in my case, the problem crops up when shooting lengthy events where the continuous footage ends up being split between two SxS cards. For some reason PPro CS4 has trouble after importing the long file into the project. The culprit seems to be the "importerprocessserver.exe". It locks up after importing the lengthy split clip and prevents further preview. PPro itself doesn't crash. Shorter EX1 footage works fine. It is strange that the split clip seems to import successfully, however the moment I try and preview it the "importerprocessserver" locks up and no further preview is possible (of any footage).
    My workaround has been to move the folder containing half of the split file to another hard drive and import it separately. PPro no longer sees the split files as linked and imports them individually. When I do this I have no difficulty editing EX1 footage.
    I'll be submitting a bug report on this today.

  • Removing CS3 bridge, keeping CS4 Bridge...

    I am cleaning out previous version of CS3 suite from a mac. However I've had some issues that I wondered if anyone has a solution to.
    When running CS3 Bridge, images there are not in CS4 Bridge. There is no export feature I know of (is there?). How do I get everything that is in CS3 Bridge to CS4 to show up before I delete CS3 apps ?  (this macbook pro I am using was loaded from CS2 days up to CS4...I have inherited it at work and need to make room but still keep images intact, plus I never used Bridge before so any noob help is appreciated)

    Bridge only creates preview thumbs for its own cache library and not the
    original files, they keep untouched in the same folders as you have them now
    on your system.
    You can safely uninstall CS3 without losing images. However you will need to
    cache the images again when opening CS4 but that is only taking some time.
    You will need to recreate new workspaces for PS and Bridge and also set the
    preferences again to your wishes but that is only once. Keep in mind that
    actions and brushes that you have created or loaded on your CS3 app don't
    copy automatically. Best you save them from PS CS3 first in a folder you can
    easily access and in CS4 load them again from that folder.
    For exact location for prefs in CS3 and CS4 see those knowledge base
    articles:
    http://kb2.adobe.com/cps/401/kb401600.html
    http://kb2.adobe.com/cps/405/kb405012.html
    When running CS3 Bridge, images there are not in CS4 Bridge. There is no
    export feature I know of (is there?). How do I get everything that is in CS3
    Bridge to CS4 to show up before I delete CS3 apps ?  (this macbook pro I am
    using was loaded from CS2 days up to CS4...I have inherited it at work and
    need to make room but still keep images intact, plus I never used Bridge
    before so any noob help is appreciated)

  • CS3 Bridge and CS4 on the same machine.

    Hello Everyone,
    I have adobe photoshop CS3 and Illustrator CS4 on my machine.  Any known issues for running bridge CS3 and CS4 on the same machine?  Some experts at telling me not to use Photoshop CS3 with Bridge CS4, just wondering.  Thanks for you replies.

    Bridge is not really a stand alone product, and tuned to work with its current version of PS.  Also, Bridge CS4 has some features changed and/or added.  So if using CS3 Bridge you might have aspects that don't work with PS CS4.
    I would keep CS3 on the machine if you don't need the HD space, until you feel you no longer need the older version.  But use them as a pair as intended.  Also, only have one Bridge running at a time.
    I did not upgrade to CS4, but from what I have read I see no reason to use Bridge CS3 as the upgrade is faster, less prone to crashes, and has added features.
    CS4 PS on the other hand can be tricky if you don't have a newer computer with a good video card.

  • Why is Merge into single pdf using InDesign CS3 and not CS4 ?

    I'm new to this so the question may be trivial, but it beats me:
    I've created some InDesign files in CS4 and want to combine them into one PDF. So I opened Acrobat 9 Pro and
    navigated to "Merge files into single pdf". I chose the CS4 InDesign files to Add and clicked the Combine Files button.
    BUT, this starts up InDesign CS3 and not InDesign CS4 and returns a pop-up saying "unidentified error".
    Why is starting CS3 InDesign and not CS4, and what is the "unidentified" error ! ?
    As background I intially installed CS3 and then updated to CS4, leaving the CS3 applications intact. When I initially
    bought CS3, just before CS4 was released I may have created pdfs from InDesign as an experiment, but it is possible I have not done this
    since upgrading to CS4.
    Thanks for any help

    Thanks Michael, I was not aware of quality issues. Actually this is not really significant for my usage this time. What I'm doing is just using ID to capture notes/images/links etc in several free format ID documents. I then planned to merge them quickly into one pdf using Acrobat. I can easily shuffle the file order around to create a handy portable pdf reference document with the Merge feature.
    Doing something similar from ID seemed to me to require me to create pdfs for each ID doc and them to merge them in Acrobat. I did start to write a simple script to do this in ID, but I then realised that I wanted the ordering to vary and the ID files would likely to change. Then I found the merge and bingo, that solved it..... Well it solved it on another CS4 installation that had never seen CS3, but not on my machine which had been upgraded from CS3.
    I tried looking in the registry for obvious entries that might point Acrobat to use ID CS3 rather than CS4, but couldn't spot anything. I wonder if there is something buried in there ?
    Thanks again for helping
    Regards.

  • Opening InDesign CS3 documents in CS4

    I am hoping someone from Adobe can help me with this question. Here is the scenario:
    I work on the support team in a prepress environment where we get hundreds of client supplied InDesign files weekly. Some clients supply their files in InDesign CS3 and some supply the files in InDesign CS4. We have both applications.
    From our experience, we have found that if we open a InDesign CS3 document using InDesign CS4, there is a potential for items to disappear in the document. I don't know what changed from 3 to 4 to cause this problem. This has happened to us more than one time and we have experienced money losses due to on press errors.
    One would say, as we have, if the document is supplied in InDesign CS3, work on it in InDesign CS3. Easy enough, right?
    Well, not really. If you have CS3 and CS4 both installed on your mac at the same time, simply double-clicking on the file will default to CS4 (since it is newer).
    We have told our operators that they need to identify what version the file was created in; which is not the easiest thing either.
    If you "get info" on the file, you do not get accurate information. It may say "CS4", even if it is "CS3", I think this is because your system is reading what the newest application that you have install is.
    I have found that by dragging the file over the CS3 icon in the doc, it will attempt to open the file in CS3 and if it truly is a CS4 document, you will get plugin errors and the file won't open. This works, but my 38 mac operators are so used to just double-clicking a file to open it, they sometimes forget to do it my way, and thats when we get errors.
    Is there a plugin available that would prompt you, when double -clicking on a file as to what version it is, or what version InDesign that you would like to open the file in?
    What did Adobe change in InDesign CS4 that would cause items to disappear or change when working on CS3 documents in CS4?
    Thank you in advance.

    First, this is a user forum, not an official Adobe support site, so you aren't talking to Adobe employees for the most part.
    Second, though it is subtle, there is a visible difference between the icons for file created in CS3 and CS4, but you do need to look.
    There is (or perhaps it's now "was") a known issue with master items disappearing when placing one ID file into another in CS4. Be sure your copies are updated to the latest patch. Another reason to avoid opening CS3 files in CS4 is potential differences in text flow due to text engine differences which will affect how lines break.
    If you want to train your people in a hurry, tell them the next time you have to re-run a job because they opened it in the wrong version you'll deduct the cost from their pay.
    Peter

  • Opening CS3 file in CS4 - fonts wrong!

    I have an FLA created in CS3 (Mac). It includes a couple of
    fonts that were made into symbols. I'm both using those symbols to
    set the font for dynamic text boxes on stage in various symbols (by
    selecting the font-name-with-asterisk from the font menu), and in
    Actionscript to create text.
    When I open the file in CS4, wherever I have used the menu
    option (selecting the font with asterisk in its name), when I
    select the box the font menu is showing a DIFFERENT font. And when
    I publish none of that text shows up!
    The font names with asterisks are still in the font list, but
    now they're in a separate section separated by a line from the
    regular font list.
    I'm not sure what to do - am I stuck using CS3 for the life
    of this file? I'm not even sure how many text fields are in this
    document, scattered among a number of symbols. If it was just a few
    I could probably just manually re-select the font for each. I mean,
    I assume I could do that...?
    Is there a global find/replace option to fix this? Is this a
    known bug?
    - Bob

    I'm sorry to say this, but you're stuck with CS3. This also
    happened to me and I couldn't solve it by now.
    Here you have some resource
    http://www.jumpeyecomponents.com/blog/2007/07/13/create-fla-components-for-flash-cs3/
    http://younsi.blogspot.com/2009/02/flash-cs3-to-flash-cs4-migration.html
    Kind regards,
    Petra
    fla
    erectii puternice
    cs4
    migration
    erectii puternice
    erectii
    erectie

Maybe you are looking for

  • Inspection Lot Type 03 Confirmation Pop-Up

    Gurus, Can anyone tell me why I am getting a Pop-Up that has the fields for 'Yield', 'Scrap' and 'Rework Qty' and Radio buttons for Partial Confirmation, Final Confirmation and No Confirmation on an 03 Lot when I complete all results and hit save in

  • Duplex Scanning with HP7520 on MAC OS X 10.10

    Is there a way to scan both sides of a document into a single file?  With the prior operating system, this would work if I scanned one side of the document and then fed the second side and used the same document name and checked "Combine into a singl

  • Web service call on hosted env fails with hex to raw conversion error

    Hi, I use Enciva to run some hosted Apex applications, and I've had a call open with them for a few days re: setting up a web service call to an e-mail checker, provided by a company called Rolosoft. The e-mail checker runs fine from outside the host

  • Question to Otterbox owners AND about Waterproof Headphones

    I just ordered myself a waterproof Otterbox and I have two questions here, really. 1) It says that with the Otterbox, you must either use the headset or speaker-phone function. It doesn't make a lot of sense to me, but I haven't heard anyone here men

  • Mails are sent from wron account

    Hi, My iPad is set up with two email accounts (both from Google; one Gmail and one Google Apps). When I send mail, the from address is always the same no matter which account I set as default. The compose screen shows the correct account but the mail