PP CS4 color key not working

I have a very basic use case. I have done a simple 1 min screen capture video showing a software product demonstration. I have set the background to cyan for easy key out.
However when importing to PP and adding a color key to cyan, Preview shows the color being removed. But after rendering the sequence out. The final video show a cyan background with no key color effect.... I have tried adjusing the options on the color key and different video output formats and options. But each time the color key does not seem to be reflected in the final render. like I siad preview window is correct, but after media encoder renders color key seems to habe been turned off.
if I switch to chroma key, it work correclty. But I should not have to, since it is a solid color. and should be very accurate to key out using color key.
And/also if I import the sequence (with color key) into AE... it render our correctly. The exact same thing. Renders inccorrectly from PP, corrrectly from AE, no changes etc..
I am assumeing there must be some setting somewhere I am not paying attention to. I do not know AE well enough to rely on that to get my work done.

to Chris Cox:
>"Tony - then you'll need to contact NVidia and ask them to fix the driver.."
I'll be happy to do so -- but to be effective in getting nVIDIA to accept responsibility for this problem, may I ask where you believe nVIDIA has done something which needs fixing?
a) Is there a relevant industry standard to which you believe nVIDIA is failing to comply?
b) Is there some specification published by nVIDIA to which you believe nVIDIA is failing to comply?
c) Is there any documentation published by Adobe (e.g., design guidelines for graphics cards manufacturers to assist them in making Photoshop-compatible products) to which you believe nVIDIA is failing to comply?
d) Are there specific generally-accepted good software engineering practices to which you believe nVIDIA is failing to comply?
>"As for your display color management: we haven't seen that. That sounds a lot like your display profile is wrong, but I'm not sure why it differs from CS3. Could you check your color settings in Photoshop and for the display again?"
These look right to me. Are there any specific settings you'd like me to report?

Similar Messages

  • CS4 Acrobat Key Not Working

    I have a copy of CS4 that installed fine and all the apps like Dreamweaver, Photoshop, etc. are working fine, but Acrobat 9 will not take the software key I was given. When I open a PDF it asks me to first enter my password, then looks like it may be installing something, then prompts me for a serial number or to use the trial.
    I haven't had a need to edit a PDF since I installed the software until now and had been viewing files in a browser...
    D

    Ok, here is some detail info of the issue:
    On my netbook: CPU=1.6ghz, RAM=2Gb, VGA=Intel500, SSD@60mb/s
    - Bridge cs3 = Hardware Render = impressive response time. [way beyond 30fps]
    - Bridge cs3 = Software Render  = <10fps
    - Bridge cs4 = Hardware Render = not available
    - Bridge cs4 = Software Render  = 2 or maybe 3fps (!!!) Its a huge diference!
    Come on Adobe, a loot of computers are/will be shipping this graphic card!
    Just release a patch for us. Or think about it on cs5.
    Z

  • Adobe Illustrator CS4 - Shortcut keys not working

    The short cut keys on my adobe illustrator cs4 programme have stopped working. I am working on a Mac OSX 10.9.2 . Can anyone help? I have tried reinstalling but it hasn't helped. I recently installed a wacom device would this have anything to do with it?Adobe CS4

    jimi,
    Have you installed the newest Wacom driver?
    Did you use the full three step way?
    Uninstall, run the Cleaner Tool, and reinstall?
    http://www.adobe.com/support/contact/cscleanertool.html

  • CS4 color management not working

    Running under WinXP, 4GB RAM, nVIDIA GeForce 7600 GT with latest drivers:
    The image display in CS4 is acting as if it were not color-aware.
    Example: I open a file in which is in the ProPhoto RGB color space (and has that profile embedded) and the colors are not displayed correctly (muted and low contrast) -- the same appearance as opening such a file in a non-ICC-aware app like a browser.
    Soft-proofing to sRGB does not change the appearance: colors are still wrong.
    Converting to sRGB does not change the appearance while still in the dialog box -- even with Preview toggled on.
    But upon executing the conversion to sRGB, the colors then appear correct -- again, as would be expected from a non-ICC-aware app.
    CS3 running on the same system does not have this problem.

    to Chris Cox:
    >"Tony - then you'll need to contact NVidia and ask them to fix the driver.."
    I'll be happy to do so -- but to be effective in getting nVIDIA to accept responsibility for this problem, may I ask where you believe nVIDIA has done something which needs fixing?
    a) Is there a relevant industry standard to which you believe nVIDIA is failing to comply?
    b) Is there some specification published by nVIDIA to which you believe nVIDIA is failing to comply?
    c) Is there any documentation published by Adobe (e.g., design guidelines for graphics cards manufacturers to assist them in making Photoshop-compatible products) to which you believe nVIDIA is failing to comply?
    d) Are there specific generally-accepted good software engineering practices to which you believe nVIDIA is failing to comply?
    >"As for your display color management: we haven't seen that. That sounds a lot like your display profile is wrong, but I'm not sure why it differs from CS3. Could you check your color settings in Photoshop and for the display again?"
    These look right to me. Are there any specific settings you'd like me to report?

  • Satellite A500-1GL - some single FN keys not working properly

    hi
    I have Toshiba Satellite A500-1GL, and i have a problem with the FN key (Actually not the FN key itself, its the other related keys, the keys that have the commands)
    for example:
    FN + ESC = Mute, and it work fine!
    But.. FN + F8, should enable/disable the wireless, but its not !
    here is a list of what is/not working:
    FN + ESC: Mute {color:#008000}(Working){color}
    FN + F1: Lock/Unlock windows {color:#008000}(Working){color}
    FN + F2: Search {color:#ff0000}(Not Working){color}
    FN + F3: Sleep {color:#008000}(Working){color}
    FN + F4: Hibernate{color:#ff0000} (Not Working){color}
    FN + F5: Screen Output Monitonr/Projector {color:#008000}(Workin){color}
    FN + F6: Decrease the Brightness {color:#ff0000}(Not Working) {color}actually it increases the light!!
    FN + F7: Increase the Brightness {color:#ff0000}(Not Working){color} it Decreases it! O_o
    FN + F8: Turn the Wireless On/Off {color:#ff0000}(Not Working){color}
    FN + F9: Enable/Disable the Touchpad {color:#ff0000}(Not working){color}
    FN + Space: Zoom {color:#ff0000}(Not Working){color}
    I tried to use the Toshiba Service Station to look for update, but i couldn't find any!
    i would appreciate any help.
    thanks in advance.
    Cheers

    Hi
    You have to reinstall the Value Added Package and the Toshiba Flash Card Support Utility!
    Firstly remove both software parts from system.
    Reboot the unit and then install firstly the VAP and then Toshiba Flash Cards.
    Greets

  • A s d f g keys not working on a wireless Apple keyboard for Imac

    a s d f g keys not working on a wireless Apple keyboard for Imac.
    When I type they on't work.
    *Exmple o complete entence.
    Plee help! Thi i very rutrtin. I on't wnt to ue cut n pte or ome letter.
    Thnk you in vnce.

    Make a Service appointment for the keyboard at your local AASP.
    Apple - Find Locations
    I'm not sure how old it is, but it is covered for 1 full year as long as it didn't take that 19 story dive.

  • Volume and brightness keys not working with new keyboard on imac

    I just purchased a new wired keyboard for imac and brightness and volume control keys not working . i have tried adjusting keyboard settings. I have software version 10.5.8. Do I need to upgrade software. Thank you for any help.

    Do you have "Automatically Adjust Brightness" check box ticked in System Preferences > Displays > Display ? If so, you can't manually adjust brightness.

  • Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. Did you saw this problem?

    Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?

    It seems there's a workaround here:
    https://discussions.apple.com/thread/5566037?tstart=0

  • Some keybaord keys not working after suspect virus on Tecra A

    Apostrophe, delete, semicolon and end keys not working after a suspected virus attack. I found record of the same problem on the net but apparently this guy fixed his problem after he found scroll lock or num lock on.
    This is not the case here but there is something going on with numlock - register shows 2 and not 0. change to 0 but when reboot back to 2 again.
    Suspect changed back by bios. I thought i couldnt get to bios because DEL key not working but found ESC works.
    Tried to reset default values for bios but then cannot save and exit as this required the END key to work.
    I was running XP at the time of the (suspected) attack and could not rectify the problem so put the computer back to the OEM status which i hoped would help - it did not, same problem so rather than install all the software on the computer again with XP i upgraded to Windows7 - fresh install.
    Still keys do not work - it was a real pain to start with as my computer was set up to ctl+alt+del to log in and i had to do this with on screen keyboard - XP - this also showed that numlock was on before and after windows boot.
    The reason i suspect a virus - my wife was watching one of her tv shows on line from home country (another toshiba laptop) and i needed to use that laptop for something else so i asked her to use mine - later on we turned the laptops off and in the morning turned tham back on again, the other laptop with AVG virus protection flagged several hits and this one with (FAMOUS and completely up to date) Norton flagged nothing - once i got into it using on screen keyboard.
    Problems with this computer was found after scanning with a different antivirus.
    Anyway - i am left with 4 keys that do not work on my keyboard (actually they did work after i logged into the computer for the first time but i had to hold them in for a long time - and then next time i rebooted, not work at all and havent ever since)
    Any assistance here would be greatly appreciated, i have been working on this all weekend with no joy at all.
    Thanks in advance.

    Thanks Xardas,
    I have essentially done both - tried Toshiba OEM status found on a small partition of the toshi hard drive - no good - then did a fresh install of Windows 7 - still no good
    You know - as cunning as it sounds - i cannot reload the default settings in BIOS as it requires the END key to work so i can Save & Exit - all i can do is Exit Without Save - i sort of feel snookered at the moment.
    Toshiba got back to me today and said that i have tried everything they would have (yeah for sure) and to take my machine into a service centre for a hardware check - yeah right on boys!
    Check out this guys post below found on Kioskea.net - getting close to a year ago...
    ms ml - Nov 10, 2009 12:52am GMT
    Hi there, I was hoping that you might be able to help me with the problem that I seem to be having with my Toshiba Satellite Laptop Keyboard too. For a few days now I havent been able to use a few of the keys on my keyboard, including (1) delete (the backspace key is still working though), (2) colon/semicolon, (3) apostrophe/quotation marks and (4) end (the home and PgUp and PgDn keys are still working though). Any suggestions?
    Identical to my problem....obviously this guy had the same problem as well...see below - same thread.
    yab - Feb 9, 2010 4:47am GMT
    hi did you ever figure this out? i have the same exact problem...
    However, i was not able to solve my problem the way this guy did - my scroll lock is not activated - it seems to work ok (on and off) i tested it using Excel to move around the cells.
    yab ms ml - Feb 9, 2010 7:57am GMT
    Nevermind. For me it was scroll lock. My apostrophe, semicolon, and delete keys are alive and working again. I hope you have the same easy fix.
    Incidently - never hear from the first guy again - probably ended up being his scroll lock.
    all sugestions welcome - sorry my smily face has no eyes -) guess why!

  • Esc key not working in windows 7

    Hi,
    I have a HP Pavilion dv6-4XXX series. It's almost been 2 years I bought this notebook. 
    Recently I faced an issue. The "ESC KEY" has stopped working. However I could find that it's working fine in BIOS but not when I am logged in to windows. I have windows-7 installed.
    Please let me know what could be the issue and the solution for the same.

    Hello siddharthmishra,
    You’re having a problem with the ESC key not working.
    Go to device manager and uninstall the keyboard and restart the computer. This should uninstall and reinstall the driver for the keyboard.
    Here is a link to device manager.
    If the problem has not been happening for very long, you might try a System Restore. This will take the system back to before the problem started happening without affecting any of your files.
    Here is a link to a System Restore.
    Let me know how everything goes.

  • Command, option, ctrl, fn keys not working

    thanks to a visiting dog who got tangled up the power adapter my laptop ended up on the floor, wide open with the keyboard popped out. I have inspected the connector cable and it looks OK to the naked eye. I disconnected the keyboard cable and re-connected.
    When using an external USB keyboard all keys function normally. When using the built-in keyboard the only keys not working are the command, option, ctrl and fn keys. I have restored modifier keys to default (I had never changed them) but this did not help. I also toggled the "use F1-F12 to control..." option in the keyboard preferences to no avail and have restored keyboard shortcuts to no avail.
    Is my keyboard shot? Is the a pref file I might delete?

    Hi, Mel. If the external keyboard works properly, I'm afraid you have to figure your built-in KB has been dogged to death. I hope the pet owner will do the right thing by you. I also hope the KB is all that was damaged. How are your adapter cord, plug, and DC-In port? Does your battery still charge OK?
    Whenever anything visits my house that's active, inattentive, and built low to the ground, my Powerbook runs on battery power only. I haven't seen one yet, but the new magnetically-connected, easily- and harmlessly-detached MacBook Pro AC adapters sound like a superb idea to me. Too bad our PBs can't use 'em.

  • N95 SHORT CUT KEY NOT WORKING

    Anyone had any problems with there N95 top left shortcut key not working,mine won't do anything when pressed then suddenly has a mind of it's own and keep pressing it's self and sending blank text messages to my first contact in my address book...
    Tried software load,no cure is it back to the shops..

    my daughters as just started doing the same i have updated the software and had buttons changed but still the same

  • Keyboard: some keys not working

    Some keys not working.  Need help/suggestions.  Not great with computers so PLEASE give details/steps re: how to do what you suggest - thanks!
    Details: intel based iMac running snow leopard 10.6.8.  Apple wireless/bluetooth keyboard (came with the iMac).
    Some keys suddenly stopped working:  space, tab, capLock, option key to the right of space bar (one on the left works), down arrow
    The problem happens in various programs (safari, pages, etc)
    The keyboard is fine on another iMac
    A different keyboard is fine on this/the involved iMac
    (nutshell: keyboard works fine - computer works fine, unless they're together)
    Here's what's been tried/checked:
    -checked the settings for universal access ("mouse keys" are off) and checked for any bluetooth keyboard shortcuts.
    -in system preferences "speech" is not set for "speak selected text when the key is pressed" - this is not checked/selected
    -tried creating a new user but had the same issue so it's computer-wide rather than just a user account
    -removed the keyboard and reconnected (using the +/- signs and "disconnect" and putting in a new code of numbers to pair keyboard)
    -language/text is set for english
    -did the keyboard viewer and the keys in question did NOT highlight when pressed (but don't forget the entire keyboard is fine on a different computer so thekeys aren't the issue)
    -"slow keys" is turned off re: keyboard in system preferences.
    Any help is welcomed.  It's frustrating knowing the keyboard works, just not with this computer.  Please help.  Many thanks!

    yes - not sure how this works...if you can see my original post there are a lot of details in there.  If you can't...
    nutshell: the keyboard works on a different iMac
                 a different keyboard works on this/the involved iMac
                 I tried to create a different user and the keyboard still does not work so it is computer-wide
                 I also removed the keyboard from the computer (using the +/- symbols and disconnecting and then repairing it.  The problem remained
    Thanks for any help.  It's crazy that the keyboard is fine and the computer is fine but together, there's the problem.
    Thank you!!!

  • Sound key not working

    volume key not working ofter last update

    Hello Amandodsouza,
    It sounds like you are experiencing some unexpected behaviour with the on screen keyboard after updating to iOS 7.1.1. I would start by closing all the running apps on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that and restart the phone and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Pick color feature not working properly -- how do I reset?

    Pick color feature not working properly -- how do I reset?

    You need to contact Adobe for you billing problem this is a user four not adobe customer support.
    For your Photoshop Problems this user community may be helpful. 
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

Maybe you are looking for