PP CS4 Dynamic Link-Fehler & Projekt verloren?

Hallo,
ich habe hier ein sehr wichtiges Projekt, welches ich in Premiere Pro CS4.0.1 geschnitten habe. Gestern Abend habe ich es geschlossen und wollte es heute wieder öffnen. Nachdem sich 2 Stunden lang nichts getan hat (Fortschritt bei 90%, Adobe Premiere-Prozess bei 99%, Importer bei 0%), habe ich den Prozess abgeschossen und den Rechenr neu gestartet. Ich wollte nun das Projekt in einem neuen Projekt öffnen - aber statt der Auflistung der Sequenzen, erhalte ich einen "Dynamic Link-Fehler". Ich kann also nicht mehr auf das Projekt zugreifen, brauche es aber DRINGEND. Bitte um Hilfe! Danke.

I'm pretty sure there's chroma keyer in your version of Premiere, and if you've tried using it you know 1) it's not all that great and 2) you have to do each clip separately. The same thing applies in AE, but Keylight is much better.
I've never had to fool around with Dynamic Link -- I cut in Final Cut Pro, you see -- so I'm unfamiliar with the process of moving from Premiere to AE. Again, I'm pretty sure you can import the Premiere project, and it comes in as an AE comp. And then you'd use Keylight on the individual clips. That's a good thing, too: since exposures and lighting conditions are rarely the same from shot to shot, you get the right key for the shot, rather than keying everything at once, meeting with varying degrees of success.
There isn't a whole lot that's automatic in pulling a good-looking key, I fear.
And since I'm typing, I'm going to crab a bit... it's time for a rant!
What on God's Green Earth is going on with this web site? This is the fourth stinkin' time today I've had to log in just to post a messsage... and the second time I've had to do it to post this particular message! Geez, talk about inconvenient! It sure makes me feel like I'm welcome around here.
The next time I get one of those surveys from the idiot company that runs Adobe's web site, I'm going to let those geniuses have it with both barrels. They'd have a tough time finding a certain part of the anatomy above the legs and below the back in the dark using both hands. They're giving Adobe a bad name in my book.
There. Now I'm down off my soapbox.

Similar Messages

CS4 Dynamic Link Problem

Is anybody having trouble keeping the source files linked in After Effects after using dynamic link from Premiere?
Please refer to this link:
cwrig, "CS4 Dynamic Link Problem" #1, 26 Oct 2008 1:02 pm
This is very frustrating.
Thanks for your time!

Did some more tests and here is what does and doesn't work for me.
Losing footage -
Yes I was having the issue (and the topic is in the premiere forum also)
Here is what seems to solve it.
It loses the footage if I use the original folder which has spaces in the name. Not sure if that is the culprit but both methods proved consistent in every test I did.
it worked when I used a new folder called "Test" at the root of my editing drive.
Crashing-
Not sure if other have the issue but when I close AE, PPro will just sit there with an hour glass and show as not responding.
If I close PPro first and then AE and reopen PPro then all seems to work as it is supposed to.
This was also consistent in every test I did.

CS4 Dynamic Link practically useless

Hi!
I'm pretty pissed at the moment but I'll try to behave.
I just purchased Production Premium CS4 and mainly because of the "improved" Dynamic Link features between AE and Premiere. What a huge disappointment:
When I replace Premiere footage with an AE composition, it is almost impossible to preview that composition in Premiere. The playback is very jerky and jumps all over the place. In AE everything previews just fine, but when I go back to premiere to see my clip with the rest of the movie, the preview is just horrible. In CS3 I had to render the imported AE comps out in Premiere before I could watch them properly. But now in CS4 it wont let me render them: when I hit enter in Premiere the clip just starts playing straight a way without any rendering at all, and the result is some very jerky video playback. However, the render line in Premiere timeline is green (not red) and Premiere doesn't seem to think it needs to render anything.
I use vista ultimate 64-bit, with 8 gb RAM and an intel quad core processor. Is there anything I can do to solve this or do I have abandon using Dynamic Link in CS4? :(

I feel your pain man, though I think our issues with DL are different.
My problem is that Premiere won't render the DL from AE, but tries to play it back without rendering, with some very very poor results.
I just tested it on a totally fresh project: first I imported a clip (dvc pro hd) on to the new premiere project, then I put it on the timeline and chose "replace with after effects composition). Got the clip in AE and put keylight on it to pull a chroma key out of it. Then went back to Premiere to see the keyed footage with a bright green render line on the timeline: Premiere doesn't try to render the comp even though it can't handle playing it in any way! What on earth could be the issue in here?

Adobe pr pro cs4 dynamic link to Encore cs4: updating changes made to pr pro timeline

Recently I did a project in adobe pr pro cs4 and exported it to encore through adobe dynamic link to create a DVD. When I saw some mistakes, I went in pr pro and corrected them. It automatically updated the chages in encore. Finally, I created my DVD and burned it. Next day, I saw a minor spelling mistake so I opened pr pro and encore separately but any corrections I did in pr pro did not updated in encore! What is a better way to correct this as I do not want recreate the whole DVD project again by sending it again through adobe dynamic link?

You have to go into Encore and select Revert to Original for your Linked timeline. Any changes made after transcoding won't show up without reverting. And yes, that means you have to transcode again.

CS4 Dynamic link to AE - all links point to one comp

I know there have been lots of issues with the Dynamic Link and encoding, but I have a new one (for me at least).
I have a project with a lot of sequences, all of which use different green screen clips. All the green screen clips had been sent replaced with an AE comp, where I used AE and Keylight to ket the clips. I had everything all perfect and then this happened:
All my linked clips that came from AE all pointed to ONE AE comp. During the process of editing, I had created several different AE files that each had 2-3 different comps, but regardles of which .aep file the comp is in, the dynamic link still points to the same comp in a different .aep file.
I even tried to import an new AE comp, but every .aep file I point at, in the open comp dialog window, seems to only have one comp, the same one that the existing linked files are pointing to.
Any ideas on A: How to fix this and B: What caused this?
Oh yeah, I'm on a Mac and CS4 MAster Collection, all updated to the latest versions.
Thanks!

Hi Curt, and thank you for taking the time to respond.
Its odd how I've been trying to figure this one out for a long time and I tried your suggestion but it didn't make any difference..darn.
In the AE forum they say this is quite common and no one really knows why...double darn.
So I went back with a fresh mind this morning and tried something else..and it worked...so far anyway.
So far I figured it out... I guess I just needed to ask the question and write it all out to help get my brain working in the right direction:
Since the normal process to do this doesn't work for me ..and apparently many others..here is the solution for those of you having similar issues.
In PremPro select the desired clip you wish to place effects on
Rename it and save
R click and "Replace with AE composition"
Name new file
You will see three files pop up in AE in the project panel.
The original source clip .. in my case.. shows an icon that lets me know it isn't the true file.
Highlight this file with a click and then go Ctrl H (for PCs)
The group of computer source clips you use for your project will come up.. double click on the original clip you had imported into your PPro project.
The source file icon in AE will change to an icon that denotes the true file...save
Go to your still open Ppro project and make sure it carried the effects over..save.
Now you can save and close the AE project.
So for this works for me today and I hope this helps anyone else dealing with a similar issue.
Thanks.

Premiere and After Effects CS4 Dynamic Link "glitches"

I am no longer able to use dynamic link when I try to link to multiple AE compositions from Premiere.
What happens is, when playing the sequence back in premiere, there are random frames in the dynamic link clip that are out of order. For example if I have two compositions, A and B, each 1 second, and they are in my Premiere project, the playback might do something crazy like this:
Should be (frames):
AAAAAAAAAAAAAAAAAAAAAAAABBBBBBBBBBBBBBBBBBBBBBBB
Really:
AAABAAAAAAAAAABBAAAAAAAABBABABABABBBBBBBBBBBBBBB
I'm not sure if there is any pattern to it, but dynamic link is just not working. I thought this might be a preview issue, so I tried rendering it and I got the same incorrect sequence as the preview. I've tried things like removing and adding the compositions again, or deleting the media cache, but this always randomly comes up.
My only option has been to export in AE (and when doing uncompressed that can use a lot of disk space).
Any ideas as to how to solve this? Or is dynamic link just a broken feature?

Well that was stupid. I had to rename the compositions (they were created from Premiere so the automatic names had a trailing number). Then I had to reimport the comps and place them over the old broken ones (clearing the cache didn't seem to help with those).
After replacing with comps without numbers and clearing all of the caches, it seems to be working so far.
I can't believe this bug even exists. Especially when the "Replace with After Effects composition" will repro the bugs. Sounds like poor testing on Adobe's part.
At the very least this should be documented somewhere officially. I was able to find this post on the web after looking up this specific issue: http://www.digitalrebellion.com/blog/posts/adobe_dynamic_link_troubleshooting.html

Premiere Pro CS4 dynamic link to Encore CS4

I'm a newbe and I have a fundamental question about the Premiere Encore workflow. When I edit a project in Premier and I use the File>Dynamic Link>Send to Encore command, I get "Start New Project" from Encore. How do I update the edits I did in Premiere to a current project in Encore? Is there a way to Dynamic Link Premeire edits while I'm in Encore?

I have the exact same problem. I linked them together, but when I made the change in Premier Pro, the changes did not update in Encore. Everything
I read and watch on Adobe says it will happen automatically, but I'm not seeing it happen. Is there any way to replace an existing timeline in Encore with its updated sequence in Premier?

Adobe Premiere Pro: Adobe Dynamic Link requires Adobe Production Premium?

Hi all!
We upgraded for some while ago from CS4 to CS5, but forgot to remove CS4 in the thrill of exploring CS5. It's two computers with Master Collection, but the problem I'm going to tell you about is only occuring on one of the computers.
We uninstalled CS4 from Computer 1. And after the unistallation of CS4, Dynamic Link between Premiere Pro, After Effects and Encore won't work.
Computer 2 has still CS4 installed, and the Dynamic Link works on that workstation.
These computers are both Win 7 64 bit.
How do I fix this? The Dynamic was such a nice part of the worklow.
Any updates that were recently published or any fixes or workaround. Cause we have tried to unistall and reinstall and unistall and reinstall and even ran the Clean Tool a few times.
Thanks for any help

HII!
Unistalled everything, from CS5, to Adobe player to Flash and ran the cleanupscript some times and ran CCleaner on the registry. After 6 reboots, I installed CS5 again, downloaded all updates and now it works!
Thanks for the help guys!

Encore Timeline Audio Sound Vanishes from Dynamic Link to PPro CS4

Windows XP Pro SP 3
CS4 Production Suite Premium
Premiere Pro V4.2.1
Encore V4.0.1.048
Problem: Encore Timeline Audio Sound Vanishes from Dynamic Link to PPro CS4
I have several several PPro CS 4 projects each with a couple sequences.
In Encore CS4, I make dynamic links to the sequences using
Adobe Dynamic Link | Import Premiere Pro Sequence ...
In Encore, I create the Timelines for the Sequences from the dynamic links.
In the Encore Timeline for each sequence, each Timeline initially plays the video and audio correctly.
However, should I make any minor edits in Premiere (via edit original in Encore) like changing a title's text and re-rendering the PPro sequence, the Encore Timeline plays the video fine, but there is no audio (the audio track is there, but no audio sound occurs). The Encore dynamic link is untranscoded.
The following do not make the Encore Timeline audio track audible.
Update markers from source.
Clean database button for PPro and Encore.
Deleting the media Cache and Media Cache Files folders.
Deleting the Encore Cache folder.
The only way which seems to fix the audio is to delete the Encore Timeline and generate a new Timeline from the dynamic link. Of course, this means relinking the end actions for the buttons and timelines which is a pain and defeats the purpose of using dynamic links.
I have been using dynamic links without audio problems for quite awhile without a problem. Now this problem appears in many projects. Thanks in advance.

Haven't seen a post from the OP since this one.
I cannot directly answer, but here's some info.
From a variety of users comments, and my limited experience with CS4 and significant experience wiht CS5, there were improvements in CS5.
The number one issue when users find no audio in DL situations is not waiting for conforming. Look at the progress bar and wait till done.
You are more likely to see DL audio problems using files in Premeire that are not as easy for Encore (e.g. mp3).

Dynamic link not working for PPCS4 after installing CS4

Background. I had CS3 Master Collection. I then needed some features in PPCS4 so I purchased that as a standalone upgrade. Recently I decided to upgrade the entire suite to CS4 Creative Suite 4. Everything installed fine. However when I try to go from PPCS4 using Dynamic Link I get a message that says Adobe Dynamic Link requires Adobe Production Premium (which I have). I assumed I needed to delete PPCS4 and I went so far as to delete the entire CS4 suite + the Premiere Pro and start over. Again, it installed fine but the same problem happens all over again.
Is there some config file somewhere or registry tweak so I can use dynamic link? I am on Vista 64 machine.
Thank you - Pat

Use the uninstall scripts from Adobe to completely remove all vestiges of PPro from your computer. Then perform the installation.
Links to the scripts are on the troubleshooting page.
Cheers
Eddie

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

Adobe Dynamic Link will not work - Premiere Pro CS4 to After Effects CS4

Hello,
I am edited a video with a deadline, I'm importing a sequence from Premiere Pro CS4 to After Effects and making edits in After Effects. I'm able to import the Premiere Pro sequence into After Effects using Dynamic Link, but I go back to Premiere Pro and nothing has changed. Then I have to export the 21 minute long video in After Effects and that takes about 12 hours, that I can't afford. I don't know what I'm doing wrong, before I imported the timeline into AE, while I was in Premiere Pro I right clicked it and selected -Edit original. It took me to the .mov that I imported- since it's a redo. I learned how to use Dynamic Link from this tutorial-
http://tv.adobe.com/watch/learn-cs4-production-premium/using-dynamic-link/
At first when Dynamic link didn't work I thought it was because I was cutting the imported Sequence from Premiere Pro in After Effects becasue I was motion tracking. When you import a Premier Pro sequence can you cut it into individual layers in After Effects?

I'm importing a sequence from Premiere Pro CS4 to After Effects
That doesn't create the type of Link you want here. In this case, changes made to PP would show up in AE. You want the reverse. (And you can only go one way, not both.)
http://help.adobe.com/en_US/PremierePro/4.0/WS725e431141e7ba651172e081238226cdf5-8000.html

File failure with Adobe Dynamic link when opening a *.prproj file - Premiere Pro CS4

Hi everyone,
I'm trying to open a Premiere Pro CS4 file (*.prproj) but the bar that appears sating 'Opening file' (or similar) gets stopped before finishing to load the file.
I tryed to export some sequences using Adobe Media Encoder CS4 (I wanted to rescue my work), but when I have to select the sequences that I want to export, it says that there is a problem with Adobe Dynamic Link.
Any idea for rescue the file?
Thanks!
Jordi

function(){return A.apply(null,[this].concat($A(arguments)))}
enrage222 wrote:
which question? the 9 dots?
Go directly to http://premierepro.wikia.com/wiki/Troubleshooting
Read and follow all instructions for troubleshooting
Report back with the answers to the questions at the end of that link

Soundbooth CS4, Premiere Pro CS4, & Adobe Dynamic Link

What do I need to do to import Premiere Pro timelines into Soundbooth? The option for "Adobe Dynamic Link" is in the File menu, but the "Import Premiere Pro Sequence..." option is grayed out and unavailable. Soundbooth was purchased and installed separately from Premiere, but both applications are CS4.

Don't waste your time!!
Read this thread:
http://www.adobeforums.com/webx/.59b76657/2
Dynamic Link is a marketing pipe dream, not a pipeline!

Premiere Pro CS4 export doesn't work Dynamic Link Error

I am on Windows XP and have upgraded to Premier Pro CS4. I have under a 2 minute video that will not export (combo of photos and avi files we shot and a couple purchased avi in the NTSC format). AME sits on a "Waiting" status with no sign of movement. After an hour I turned it off. Tried to open AME and add the sequence, when I get the Adobe Dynamic Link Error - at least I get an error. What is this? I have no extra items on the timeline and have deleted the other sequences out to see it that mattered - no. I have done the updater and have the latest updates - still nothing. What am I missing? What should I be looking for? Help Please.

Antivirus isn't an issue and I have a lot of space.
Gerri
Allan Block
"This is a transmission from Allan Block Corporation and may contain
information which is privileged or confidential. If you are not the
addressee, note that any disclosure, copying, distribution, or use of
the contents of this message is prohibited. If you have received this
information in error, please destroy it and notify us immediately at our
telephone number (952) 835-5309."

PP CS4 Dynamic Link-Fehler & Projekt verloren?

Similar Messages

Maybe you are looking for