PP CS4 Encoding problem

I can't make the encoder work. I've tried to encode a two minute segment to AVI and WMV (neither works). When I export, the Adobe Media Encoder opens and the source file is in the box. The status says "waiting" but when I press the "start queue" button, nothing happens and it eventually times out. Any suggestions would be appreciated.

Some suggestions

Similar Messages

Windows 7 & CS4 Encoding Problem: DivX / Xvid / Lagarith

I'm having a lot of problems exporting a custom video file (1024x768) on CS4 and Win 7 64 Ultimate.
I installed:
Xvid 1.1.3 = Does nothing, gives error when trying to execute.
Xvid - Nic's build = Various codecs, XVid crashes CS4, ffshow crashes CS4, DivX creates 10 Gig files that cannot be
used.
Lagarith Lossless Video Codec cannot be installed.
Uncompressed creates a 15 Gig file that cannot be used.
Encoding takes 3+ hours on a 5 Gig AMD X2.
The video clip is only 5 minutes long, how can I solve this export problem?

The readme file of lagarith says:
Installing the 32bit version on Windows 64
Extract all the files to a folder
Open up a command prompt (start->run: cmd)
Change directories to sysWOW64 ("cd C:\windows\syswow64")
Type the following (replace example_path with the actual path to the extracted files), then hit enter:
rundll32.exe setupapi.dll,InstallHinfSection DefaultInstall 0 c:\Legarith\lagarith.inf
This method can also be used for installing other 32bit codecs such as Huffyuv that install via a .inf file.
What I did:
Extracted the files: there is a dll file and some other txt files.
Copied all the files to: c:\Legarith\
Copied these files to the C:\windows\syswow64 directory.
Open CMD and go to C:\windows\syswow64 directory
Execute:
rundll32.exe setupapi.dll,InstallHinfSection DefaultInstall 0 c:\Legarith\lagarith.inf
A popup pops up (LOL)
Error
Installation failed.
(OK)
Ok, any adea of how to actually

CS4 Encoder problem

I have a series of different (seperate) movie clips within one Premiere file. I'm trying to export a clip that is only 2 seconds in length. I choose File > export > media. I adjust my export settings and select OK. Which then opens up the media encoder. My export file/settings are loaded and I select Start Queue. The progress bar at the bottom of the encoder says Loading "file name.prproj". It attempts to load for about 4 minutes then fails and I get a error saying..
: Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
NO files have been moved. I was using CS3 last week and just upgraded to CS4 this week. I opened up my old files, saved them as CS4 files..and now can't export videos.
Any help appreciated,
Josh

See:
Error:Could not read from the source. Please check if it has moved or been deleted
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Adobe Media Encoder (Pr CS4) encodes my videos without the effects of the plugins Genarts Sapp

Hello,
My Adobe Media Encoder (Premiere CS4) encodes my videos without the effects of the plugins Genarts Sapphire. I did not have this problem with CS2 and also he encodes all other plugins.
Do you know why? I really need to solve this serious issue.
Any help will be apprecieted,

OK, good. Go to C:\Users\username\AppData\Roaming\Adobe\Premiere Pro\4.0 and look for two files called "Plugin Loading.log" and "Headless Plugin Loading.log" (without the quotes). These are just text documents, so open them up in Notepad or similar and compare the two; what you're looking for are references to your Sapphire plugins. What you'll probably find is that in "Plugin Loading.log", the plugins are loaded successfully--it will say something like "The plugin was successfully loaded from the registry."--whereas in "Headless Plugin Loading.log" the same plugin will be marked "The plugin is marked as Ignore, so it will not be loaded."
If you see that, let me know and I'll try to walk you through the steps of correcting it. If you like, I'd be happy to look at the log files; attach them to a reply here (they're small documents).

CS4 Export Problem

I have an external hard drive to which I export my encoded CS4 video files once I have finished editing. The problem is that, in doing so, space seems to be used also on my C drive. I need to find and delete these files on my C drive once my PP project files are rendered to my external drive. I have looked in temp files but they not there. Can anyone advise me on this?

That's done it S.V. Many thanks!
Lewis B.
Date: Mon, 13 Sep 2010 11:13:53 -0600
From: [email protected]
To: [email protected]
Subject: CS4 Export Problem
I'm a newbie so don't take my word as gospel buuuuttt....
If you're using Vista you might be making the same mistake as me. Go edit>preferences>media, hover the mouse over the media cache files location (i.e. C:\yadayada) and TYPE that into the bar at the top of the my computer. Don't click through and try and find it, TYPE it like you would an internet address in a web browser.
Silly Vista.
>

Adobe Media Encoder CS4 Encoding Error

I got an error when Adobe Media Encoder CS4 encoding which is the crash of ImporterProcessServer. It crashes the halfway of the encoding process. I restarted my comp and tried several times before but the results still the same. Sometimes ImporterProcessServer did not crash but the encoder failed compiling without any error.
Processor : Intel Core 2 Duo E4600 2.4GHZ
RAM: 2GB
OS: Win7 32bit
Graphic: Nvidia 8600 GeForce 512 mb

First thing to check is what is on the Timeline at about the 50% point. Do you have an odd Asset there?
Do you have a gap in the Video at about that point?
Then, do you have adequate defragmented free space on the destination HDD?
Good luck,
Hunt

Encoding problems in email while on Windows Mail app

Hello.
I have a question concerning email and encoding problems in the Windows Mail App in Windows 8.1. I have encountered a problem with an email I received, while reading, I see strange ASCII characters in one email. I have never encountered it in
my web browsers nor Gmail, just the Mail App.
I was referred to come here when I had asked a similar question there:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-ecoms/strange-foreign-ascii-characters-appearing-in/911f8a44-c302-4fa1-bcaa-3297b32d9120
I don't know which forum to go to so I picked here.
Is there any way that it can be resolved. I tried to troubleshoot, nothing worked; I even synched, to no avail.
I look forward to a response.
JB

Hi JB,
The responder on answers was a bit confused. The MSDN forums are for developers to discuss writing their own apps. We cannot help with problems using Windows or its built-in apps.
If the folks on answers cannot help then you may need to open a support incident. See
http://support.microsoft.com , or the folks on answers may be able to direct you to the specific page for the Windows Mail app.
--Rob

Encoding problem while reading binary data from MQ-series

Dear all,
we are running on 7.0 and we have an encoding problem while reading binary data from MQ-series. Because we are getting flat strings from queue we use module "Plain2ML" (MessageTransformBean) for wrapping xml-elements around the incoming data.
The MQ-Series-Server is using CCSID 850, which we configured in connection parameters in communication channel (both parameters for Queuemanager CCSID and also CCSID of target).If there are special characters in the message (which HEX-values differ from codepage to codepage) we get errors in our adapter while executing, please see stack-trace for further analysis below.
It seems to us that
1. method ByteToCharUTF8.convert() expects UTF-8 in binary data
2. Both CCSID parameters are not used anyway in JMS-adapter
How can we solve this problem without changing anything on MQ-site?
Here is the stack-trace:
Catching com.sap.aii.af.mp.module.ModuleException: Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
    at com.sap.aii.af.modules.trans.MessageTransformBean.throwModuleException(MessageTransformBean.java:453)
    at com.sap.aii.af.modules.trans.MessageTransformBean.process(MessageTransformBean.java:387)
    at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:103)
    at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:292)
    at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
    at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:84)
    at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
    at com.sap.aii.adapter.jms.core.channel.filter.ConvertBinaryToXiMessageFilter.filter(ConvertBinaryToXiMessageFilter.java:304)
    at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
    at com.sap.aii.adapter.jms.core.channel.filter.ConvertJmsMessageToBinaryFilter.filter(ConvertJmsMessageToBinaryFilter.java:112)
    at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
    at com.sap.aii.adapter.jms.core.channel.filter.InboundDuplicateCheckFilter.filter(InboundDuplicateCheckFilter.java:87)
    at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
    at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:123)
    at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filter(TxManagerFilter.java:59)
    at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
    at com.sap.aii.adapter.jms.core.channel.filter.DynamicConfigurationFilter.filter(DynamicConfigurationFilter.java:72)
    at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
    at com.sap.aii.adapter.jms.core.channel.filter.PmiAgentFilter.filter(PmiAgentFilter.java:66)
    at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
    at com.sap.aii.adapter.jms.core.channel.filter.InboundCorrelationFilter.filter(InboundCorrelationFilter.java:60)
    at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
    at com.sap.aii.adapter.jms.core.channel.filter.JmsHeadersProfileFilter.filter(JmsHeadersProfileFilter.java:59)
    at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
    at com.sap.aii.adapter.jms.core.channel.filter.MessageInvocationsFilter.filter(MessageInvocationsFilter.java:89)
    at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
    at com.sap.aii.adapter.jms.core.channel.filter.JarmMonitorFilter.filter(JarmMonitorFilter.java:57)
    at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
    at com.sap.aii.adapter.jms.core.channel.filter.ThreadNamingFilter.filter(ThreadNamingFilter.java:62)
    at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
    at com.sap.aii.adapter.jms.core.channel.SenderChannelImpl.doReceive(SenderChannelImpl.java:263)
    at com.sap.aii.adapter.jms.core.channel.ChannelImpl.receive(ChannelImpl.java:437)
    at com.sap.aii.adapter.jms.core.connector.MessageListenerImpl.onMessage(MessageListenerImpl.java:36)
    at com.ibm.mq.jms.MQMessageConsumer$FacadeMessageListener.onMessage(MQMessageConsumer.java:399)
    at com.ibm.msg.client.jms.internal.JmsMessageConsumerImpl$JmsProviderMessageListener.onMessage(JmsMessageConsumerImpl.java:904)
    at com.ibm.msg.client.wmq.v6.jms.internal.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:4249)
    at com.ibm.msg.client.wmq.v6.jms.internal.SessionAsyncHelper.run(SessionAsyncHelper.java:537)
    at java.lang.Thread.run(Thread.java:770)
Caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
    at com.sap.aii.messaging.adapter.Conversion.service(Conversion.java:714)
    at com.sap.aii.af.modules.trans.MessageTransformBean.processTransform(MessageTransformBean.java:538)
    at com.sap.aii.af.modules.trans.MessageTransformBean.processTransform(MessageTransformBean.java:528)
    at com.sap.aii.af.modules.trans.MessageTransformBean.processTransform(MessageTransformBean.java:471)
    at com.sap.aii.af.modules.trans.MessageTransformBean.process(MessageTransformBean.java:364)
    ... 36 more
Caused by: sun.io.MalformedInputException
    at sun.io.ByteToCharUTF8.convert(ByteToCharUTF8.java:270)
    at sun.nio.cs.StreamDecoder$ConverterSD.convertInto(StreamDecoder.java:287)
    at sun.nio.cs.StreamDecoder$ConverterSD.implRead(StreamDecoder.java:337)
    at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:223)
    at java.io.InputStreamReader.read(InputStreamReader.java:208)
    at java.io.BufferedReader.fill(BufferedReader.java:153)
    at java.io.BufferedReader.readLine(BufferedReader.java:316)
    at java.io.LineNumberReader.readLine(LineNumberReader.java:176)
    at com.sap.aii.messaging.adapter.Conversion.convertPlain2XML(Conversion.java:310)
    at com.sap.aii.messaging.adapter.Conversion.service(Conversion.java:709)
    ... 40 more
Any ideas?
Kind regards, Stefan

Hi Stefan,
for the first MTB now we are using only one parameter: Transform.ContentType = text/plain;charset="ISO-8859-1"
The second MTB, which does the XML-Wrapping, is configured like this:
Transform.Class = com.sap.aii.messaging.adapter.Conversion
Transform.ContentType = application/xml
xml.conversionType = SimplePlain2XML
xml.fieldNames = value
xml.fieldSeparator = §%zulu§%
xml.processFieldNames = fromConfiguration
xml.structureTitle = payload
Both CCSID configuration parameters from the "Source"-Tab we've set to 850.
Now, we don't get an error anymore - sun.io.malformedInputException - , but, unfortunately, now special character conversion succeeded (we need an "ß" and we get an ISO-HEX-E1 -> á). E1 is (different from ISO) an "ß" in 850.
Any ideas?

Encoding problem in call-back to hook URL (post parameters)

Hello all,
I'm encountering a character encoding problem while retrieving the content of the shopping basket from one of our provider.
After the POST request is made by the provider to our system using the hook url, when debbuging I can see that some special characters are represented with the sign '#' (after the call the ITS_IMPORT_CONTEXT).
In our case using the parameter http_content_charset with various values, including UTF-8, did not change the result.
Inspecting the HTTP traffic has highlighted the following: the encoding received from the provider is related to UTF-8, but while we are expecting the hexadecimal values, we are receiving the "Unicode code points", which are not recognized by our SAP system. For more details look at the UTF-8 encoding table found here and compare the values under column "Unicode code point" with the one under column "UTF-8 (hex.)".
As an example, for the character 'é', we are receiving the value "%E9" (the code point) instead of receiving the the hexa value : "%C3%A9".
Do you have any idee if this can be corrected on our side or if the provider must addapt the way it's sending the POST parameters?
Many thanks in advance for you help.
Best regards,
Jerome.

Hi Jason,
Indeed I had contacted the provider and informed them about the encoding problem and the fact that passing the parameter http_content_charset had no effect on the sent back encoding.
They have taken into account my request and have changed the encoding used during the request to the HOOK_URL.
Thanks to all of your for your help.
Regards,
Jerome.

Character encoding problem using XSLT and Tomcat on Linux

Hi,
I have an application running on a Tomcat 4.1.18 application server that applies XSLT transformations to DOM objects using standard calls to javax.xml.transform API. The JDK is J2SE 1.4.1_01.
It is all OK while running on a development enviroment (which is Windows NT 4.0 work station), but when I put it in the production enviroment (which is a red hat linux 8.0), it comes up with some kind of encoding problem: the extended characters (in spanish) are not shown as they should.
The XSL stylesheets are using the ISO-8859-1 encoding, but I have also tried with UTF-8.
These stylesheets are dynamicly generated from a JSP:
// opens a connection to a JSP that generates the XSL
URLConnection urlConn = (new URL( xxxxxx )).openConnection();
Reader readerJsp = new BufferedReader(new InputStreamReader( urlConn.getInputStream() ));
// Gets the object that represents the XSL
Templates translet = tFactory.newTemplates( new StreamSource( readerJsp ));
Transformer transformer = translet.newTransformer();
// applies transformations
// the output is sent to the HttpServletResponse's outputStream object
transformer.transform(myDOMObject, new StreamResult(response.getOutputStream()) );Any help would be appreciated.

Probably you need to set your LANG OS especific environment variable to spanish.
Try adding this line:
export LANG=es_ES
to your tomcat/bin/catalina.sh, and restart tomcat.
It should look like this:
# OS specific support. $var _must_ be set to either true or false.
cygwin=false
case "`uname`" in
CYGWIN*) cygwin=true;;
esac
export LANG=es_ES
# resolve links - $0 may be a softlink
PRG="$0"
.(BTW, keep using ISO-8859-1 encoding for your XSL)
HTH
Un Saludo!

C# GWTypeLibrary - AddressBook Entry encoding problem

Hello.
I am using C#(Visual Studio 2005) and GroupWareTypeLibrary to develop for
GroupWise Client 7.0.
Working with AddressBook I have faced some problems.
I am getting display name (AddressBookEntry.DisplayName) for all entries
of AddressBook. Almost all DisplayNames are correct but there are some
problems with two or three of them (there are some illegal char displayed
instead of some char of real user DisplayName). I think it is local
encoding problem bekause I see the same problem with the same users in
GroupWise Client AddressBook.
I thought display name is building not correctly but when I tried to get
these users first and last name I have got the same problem with encoding
in them.
Please advice how to decide this problem.
Regards,
Alex.

Sounds like a GW Client problem and not an API problem if you see it in the client address book. Technical Support should be able to help you.
Glade,
Novell Developer Support

Encoding Problems with WRT300N V2

Hello guys,
i have following problem:
I have a WRT300n Router and it seems to have problems with WPA2 encoding. I have 2 different deviceses (a SMC Ethernet Bridge and a PS3) trying to connect to my Linksys wireless router. No chance in WPA2 mode but when I try in WEP-Mode, both devicec can connect to it.
Are there known encoding problems?
Any idea what i can do?

It is able to use. But my router always drops the connection. WEP is no problem, but ... what about low security and Wirless N is not enabled ??

Encoding problem (via ORB)

Hello,
I posted this problem few months ago, but still havent been able to solve this.
I have a Client Server program which communicates via ORB, i.e. using CORBA, with server running on Solaris OS and Client running on windows.
The server returns string containing chinese characters to the client.
However, my chinese characters dont appear properly on the client side.
If i run the client on the Solaris OS there is no problem with it.
I tried converting the encode of the string by getting its byte and creating
a new string with encoding parameter. None of this seems to work.
I can see the chinese character when the server is writing to OutputStream of CORBA, but on the InputStream of CORBA it does not
show properly.
Any ideas on how i can overcome this encoding problem where the C/S is
communicating via CORBA (ORB)?
Thanks in advance.

Thanks for your reply
Yes, i know the BIG5 is for Traditional Chinese and japansese is using like Shift-JIS or EUC.
So when i try to post japanese in a BIg5 web page, i think it's normal that i can't see it in BIG5 encoding.
But then i change the Safari default decoding to BIG5 HKSCS, the japanese appers! At the same time i can see the traditional chinese too!
And if i use Firefox, i can both see the japanese and chinese at the default BIG5 encoding.
So i simple think maybe safari translate my japanese into BIG5 HKSCS,not Shift-JIS. But if i use Firefox, i can get the same result with only BIG5 encoding, not BIG5 HKSCS. So i am just wondering why it's different between Safari and Firefox with the same BIG5 encoding.
Following is a example URL
It's a MAC discussing froum with BIG5 encoding in Taiwan.
http://ubb.frostyplace.com.tw/viewtopic.php?t=19162
It's a froum topic posted by me. I input some japanese into this topic
If you browse this page with Safari BIG5 encoding, you can see a lot of question mark instead of the original japanese word that i and other people posted.
But if you change the encoding to BIG5 HKSCS, the japanese appears. And if you using Firefox with BIG5 encoding, the japanese appears too.
So is it someing wrong with Safari's BIG5 encoding or some other reason makes this happen?

View Object Encoding problem

I'm using Jdeveloper version 11.1.2.1. I have a encoding problem when creating View Object based on a query. This is my query:
select id, DECODE(id,'11','Индивидуално,'13','Semejno','14','Grupno') naziv
from ins_type
where class_id = '14' and id in ('11', '13', '14')
It is a simple LOV query with cyrilic letters. When I save the ViewObject and re-open it im getting question marks(???????) instead of the cyrilic letters. This only happens in the view object. I dont have other encoding issues when working with cyrilic letters only when im trying to build a View Object based on a query that has cyrilic letters. If i read those values from the database everything is fine
Thanks,

Change the encoding of your application to UTF-8 which appears to be sufficient for cyrilic chars. Here is a quick guide on how to do this http://docs.oracle.com/cd/E17984_01/doc.898/e14693/appa_configuring_jdev.htm
You may also need to update any pages that have encoding explicitly set

Czech characters encoding problem in RTFTemplate with Velocity engine

Hi,
I am trying to use your RTFTemplate project but I have trouble displaying Czech characters in the generated RTF document. Instead of characters like �čř� I get only questionmarks ????. I thought that this could be related to setting a wrong encoding in the velocity.properties file, so I set it to windows-1250 (support for Czech characters) but it didn�t help. Do you have any idea, what could be the problem? If this is not the right place to ask such question, please let me know about a better one.
Thank you for your time,
Ivo Jansky

Hi Jason,
Indeed I had contacted the provider and informed them about the encoding problem and the fact that passing the parameter http_content_charset had no effect on the sent back encoding.
They have taken into account my request and have changed the encoding used during the request to the HOOK_URL.
Thanks to all of your for your help.
Regards,
Jerome.

PP CS4 Encoding problem

Similar Messages

Maybe you are looking for