PP CS4 Problem with exported H.264 .mp4 video. Can't AME do proper encoding?

Trying to export a Video of ~60mins using the H.264 Codec .mp4 which converts in AME successfully, allthough when playing back the f
ile, it has problems after ~40mins. When i try to jump to a later point in the timeline to playback i.e. 48th minute or 50:10 or wha
tever, the image freezes, audio continues and it takes 10-20 secs untill the video image continues.
I tried different playback programms like VLC,Windows media etc. and different compressions 2-5Mbps as CBR and VBR1 / 2, nothing cha
nged.
Source is Sony DV and i have some still images as .png. Since the first 30mins work alright, i thought i try out if something with t
he source material in the timeline is causing the problem , so i cut after the 30st minute and copied the first 30mins behind that
to get a 60mins video, but exaclty the same playback issue after ~40th minute.
Is this an most likely a problem caused by AME using H.264 .mp4 Codec?
Other videos i did months before in the same way using the same source material worked fine. Adobe Premiere and AME is up to date!
Thank you

hmn sounds like it makes sense. I have seen that "i-Frame in GOP" somewhere in PP i think.
Allthough i recall that i had videos i exported which played fine till the end with no delay at a later seek distance.
I noticed that quicktime player has the same issue but is much quicker than VLC.
Is there a work arround or alternative? Can it be improved?
I need H.264 & .mp4 for webpodcast on vimeo.com
The only thing which looks strange to me ist that the lenght of the delay showing the images (i guess finding it) takes almost the same time
as on other later point like at the very end. Id assume that if its normal behavior the delay should become bigger and bigger with a later point in time ?
Appreciate your time to answer jim,Thanks
Markus

Similar Messages

Captivate 5.5: Problems with export SWF to MP4

I recorded a screencast of several moving graphs by using the FMR-mode in Captivate 5.5. The flash file looks pretty good, but I am unhappy with the MP4 that I exported afterwards because it is jerky. Is it usual that there are losses due to the compression or did I just use the wrong settings? Is it possible to export an MP4 file that looks just as good as the SWF? Do you have any recommandations regarding the settings?
I am inserting some features with Final Cut afterwards. To avoid further compression losses, I would appreciate some hints regarding the settings in Compressor. The final file shall be an MP4.
Do you think with the HD screencast function of Captivate 6 or 7, my problems would be solved?
Thanks a lot for your help!

Hey Lilybiri,
thank you for your answer. I tried pretty much everything, default settings like SD / HD widescreen as well as custom settings in all different kinds. I even implemented a 30 frames-extra (http://www.tecwriter.de/wordpress/captivate-5-5-exklusiver-spezialtipp-mp4-output-verbesse rn/), but nothing helped. and i am not sure, if captivate's FMR function is the problem, as the swf is much less jerky.

Problems with exporting H.264

I want to export my video and put it up on Youtube, and I see that you're generally recommending H.264, and one of the youtube presets.
Now I've tried both those settings, and some other settings, and I still get some black bars on the sides. Ranges from small black bars to big. Why is that?
I've scaled the footage where needed, and everything is perfect, but when I try to export it, and I watch on output who it's going to look like, it's just not right. Are there any settings I should take a second look at, any settings I may have clicked on that shouldn't, etc?

I posted to the older THREAD on the Timeline In & Out points, but will restate here.
Black bars indicate a mis-match in settings. Could be Sequence vs Assets, or perhaps an Aspect Ratio issue between Sequence and Export settings.
What is the Sequence Preset?
What are the specs. of your Assets?
For YouTube, others will have to give specs., but for their benefit, please list the YouTube settings that you used.
Good luck,
Hunt

Problems with playback of embedded .mp4 videos in PDF

I am creating an ebook that has embedded videos that I made in Premiere Pro CS4.
They play back great in the PDF on my iMAC but when I email the pdf to my Windows laptop, the videos barely play! The Windows laptop has Acrobat 9 reader installed.
I have tried embedding the videos with the multimedia tool using the Flash format and also using the Legacy Multimedia Content option.
Why does Windows have so much trouble with the playback!? Most of my customers probably have Windows computers so I need to get this resolved.
Any thoughts?????

I'm using the Video Tool because the videos are .mp4 format. In the Insert Video dialog box it mentions that "Your multimedia will be converted to Flash format to ensure consistent playback across multiple platforms using Adobe Reader 9 or later."
Do you think it would be better to convert the videos to Flash and use the Flash Tool?

Hi , i'm having a problem with opening my converted mp4 videos on itune , i've tried alot if things and different converting programmes and faced the same result , although it was working before , so what should i do ?

Before , my downloaded and converted movies were working on itunes , but now , i can't open them on itunes .
I have tried Leawa mp4 converter which was working before , but now it convertes without opening in itunes , then i tried any video converter and the same happens ( it convertes without opening in itunes) , i have tried to copy and paste my vidoes into automatically add to itunes in itunes media , and it didn't add .
So , if someone has a way to put my vidoes into itunes i will be glad
Thank you

Repair your QuickTime.
Control Panel >
Win7/Vista - Program n Features
WinXp - Add n Remove Programs
Highlight QuickTime, click CHANGE then REPAIR

I'm having problem with exporting video from premiere pro cc 2014

I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
When I click Export and media, the window for exporting appears and it starts exporting video.
But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
It literally says it has a problem with compiling, but I don't know what the real problem is.
I tried many things like restarting computer and Premire Pro but it's no use.
But it works when I use Adobe Media Encoder CC 2014 for exporting video.
If anyone knows any possibilities about why this problem happens, please let me know.

I'm having a similar issue. When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render. Randomly, at some point in the process, the render just stops and the ETA just keeps climbing. I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it. Even a clean re-install of CC 2014 doesn't work.

Problem with Exporter for MS Access 3.2 in SQL Developer

Hi,
I have problem with exporting tables and data from MS Access to XML with Exporter for MS Access 2000.
This error ocurr: 'Error #5 - XML Exporter'
When I use Exporter for MS Access 2002 this error ocurr: 'Error #3478 - XML Exporter'
Any leads how to solve this problem ?

Thread moved to Forum Home » Database » SQL Developer
SQL Developer
Please, stay tune there.
Nicolas.

Problem with exporting a report to excel vial citrix server

Hi,
We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .
Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
Can any body have idea on above mentined?
Regards,
SK.

I understand that you're trying to download the file to a local computer through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

Problem with exporting devices to non-global zone

Hi,
I've problem with exporting devices to my solaris zones (i try do add support to mount /dev/lofi/* in my non-global zone).
A create cfg for my zone.
Here it is:
$ zonecfg -z sapdev info
zonename: sapdev
zonepath: /export/home/zones/sapdev
brand: native
autoboot: true
bootargs:
pool:
limitpriv: default,sys_time
scheduling-class:
ip-type: shared
fs:
dir: /sap
special: /dev/dsk/c1t44d0s0
raw: /dev/rdsk/c1t44d0s0
type: ufs
options: []
net:
address: 194.29.128.45
physical: ce0
device
match: /dev/lofi/1
device
match: /dev/rlofi/1
device
match: /dev/lofi/2
device
match: /dev/rlofi/2
attr:
name: comment
type: string
value: "This is SAP developement zone"
global# lofiadm
Block Device File
/dev/lofi/1 /root/SAP_DB2_9_LUW.iso
/dev/lofi/2 /usr/tmp/fsfile
I reboot the non-global zone, even reboot global-zone, and after that, in sapdev zone, there is no /dev/*lofi/* files.
What i do wrong? Maybe I reduce my sol 10 u4 sparc instalation too much.
Can anybody help me?
Thanks for help,
Marek

I experienced the same problem on my system Sol 10 08/07.
Normally, when the zone enters the READY state during boot, it's zoneadmd will run devfsadm -z <zone>. In my understanding this is to create the necessary device files in ZONEPATH/dev.
This worked well until recently. Now only the directories are still created.
It seems as if devfsadm -z is broken. Somebody should issue a call to sun.
As a workaround you can easily copy the device files into the zone. It is important not to copy the symbolic link but the target.
# cp /dev/lofi/1 ZONEPATH/dev/lofi
Hope this helps,
Konstantin Gremliza

Problem with Exporting Data to Excel

Hi Everyone,
I have problem with exporting the data to a excel file. I am using a XP
system in German which uses comma "," as the decimal point , and I also set
"Use localized decimal point*" under the FronPanel Options to be true. But
the exported excel file can not recognize (or just ignore) the comma for a
whole column (flow rate), for examle "1,234" (1.234 in non-german system)
would be 1234. But if I open its text file where the data came
from by calling Excel directly, there will be no problem. Is this a bug of
LabVIEW, or I forget some settings?
Thanks a lot!
Le
P.S: The LabVIEW version is 8.2.1 and the Office version is Office2007.

Hi Le,
Sound familiar; here in The Netherlands we have the same problem. That is why we use the English versions for XP and Office.
I don’t quite understand how you interface to Excel. Directly with ActiveX or through a CSV file.
Can you explain a bit more ?

URGENT : Problems with exporting a translated application

Hi ! I have a problem with exporting a translated application. Effectively, I exported both applications (The normal and the translated version). I want now to apply the translation XLIFF. I want to know if it is possible to apply my old XLIFF file. The problem is that I can't select the same ID for my application.
I really have problems!
Anyone can help me ?

When I import the translated version, the translation works a little bit. Effectively, all my reports appear but there is no item that appears.

Problem with export files

Hello,
I have got the version 5.3, original.
I have a problem with export files. After work with a lot of picture in dng format, I try to export all picture in jpg format, but the number of pictures exported are less than the original number.
Why?
Thank you in advance

There is nothing you are doingt wrong, the web people need to check their Flash stuff, most importantly realyl include al lthe files you provide them with. there's a reason why it spits out 4 files...
Mylenium

How can I fix this problem with exporting Pages files?

Hello,
I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
Does anyone know how to fix this problem?
Thank you in advance!
Best regards,
Filipe

Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
Likewise a display might not fail until powered on and off a few hundred times.

Summary: Problem with export (maybe...terminated sucEE to XE issues exp/imp

Summary: Problem with export (maybe...terminated successfully with warnings) and import (IMP-00022: failed to process parameters)
I used PL/SQL developer to make a parameter file (initially I used it to export, then I just stole the file to try again). It contains 100 tables from a single schema.
Export from prod DB using exp parfile=test.par: Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
server uses ZHS16GBK character set (possible charset conversion)
About to export specified tables via Conventional Path ...
. . exporting table CONTRACT_INFO 12 rows exported
EXP-00091: Exporting questionable statistics.
'Export terminated successfully with warnings.' !!!I want to import into the cs2_user schema (same privileges as on the production DB) trying:impdp 'sys as sysdba'@danieldb schemas=cs2_user dumpfile=test01tables3.dmpThat gets the error: UDI-00014: invalid value for parameter, 'attach'
I then thought maybe you have to use imp/exp or impdp/expdp instead of a combination (exp + impdp) so I tried: imp 'sys/admin as sysdba'@danieldb touser=cs2_party_owner file=test01tables4.dmpbut then I just get: IMP-00022: failed to process parameters
Anyone see why its all failing? :s
Mike

you must input SID name into single-quotes like:
C:\Tools\Oracle\product\10.2.0\db\NETWORK\ADMIN>expdp 'sys/manager@stb as sysdba'
Export: Release 11.2.0.1.0 - Production on Thu Feb 9 13:46:16 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
UDE-06550: operation generated ORACLE error 6550
ORA-06550: line 1, column 11:
PLS-00201: identifier 'SYS.DBMS_UTILITY' must be declared
ORA-06550: line 1, column 11:
PL/SQL: Statement ignored

Download or upgrade current and free apps says there's a billing problem with previous purchase previous purchase what can I do to fix it

Every time I try to download a free app or even upgrade any of my apps for free it tells me to put my Apple ID I do that then it say there a billing problem with previous purchases. So I click continue and put in my debit card information correctly but still won't work it always declines it and says he's different payment method. what can I do it's been like that for 3 months that's the only card I have.

Hi ..
I replied to you here > Download or upgrade current and free apps says there's a billing problem with previous purchase previous purchase what can I do to fix it

PP CS4 Problem with exported H.264 .mp4 video. Can't AME do proper encoding?

Similar Messages

Maybe you are looking for