PP Master data to be collected from client at the time of implementation
what is the PP Master data to be uploaded in to SAP system at the time of implementation?
What are the PP general configuration settings for an industry with only Final Assembling (with out any in-house production)the semi finished products(from sub-contracting vendor) and some spares, in to Finished Product to be delivered to the customer in MTS ( monthly planning) scenario.
Hi Balaji,
The various PP realted master data which has to be collected are
1. BOM / Master Recipe.
2. Routing / Rate Routing.
3. Production Version.
4. Work Centre / Resource.
The configuration settings would depend on the clinet requirement.
Reward if useful.
Narendra
Similar Messages
-
Creation of Tech Master data with CRM IC Web Client
Hi Experts,
I have a query regarding creation of Technical master data via CRM IC Web client ( CRM7.0 & ECC6 for ISU)
1) If we are using CRM IC web Client then , how the creation of Technical Master Data is triggered from web client ?
2) Where the technical master data created first ISU or CRM ?
If anyone has the info on this please let me know.
regards,
SagarHi Sagar Arvind Phirke,
1) You need to configure CRM Middleware to exchange data between CRM and IS-U;
2) Data is created first in CRM, then it's replicated to IS-U.
Check this helpful documentation: http://help.sap.com/saphelp_crm70/helpdata/en/46/66235fc77c453a8696f76c66e8014c/frameset.htm
Best Regards,
Pedro Nunes -
BPC75NW: Error Loading Master data for BPC Dimensions from BW InfoObject
Hello Gurus,
I'm trying to load master data for BPC Dimensions from BW Infoobjects.
The ID thats used in BW is 32 char long. When I run the load, the ID is truncated after 20 chars and the records are reported as duplicates.
Due to this the load is failing.
I cannot use any other ID as the texts will not be loaded in that case.
Is there any work around to handle this?
I cannot load the transaction data either.
I looked at some posts and blogs in sdn, but nothing really helped.
Cube - 0RPM_c05 (Financial Planning cube in SAP PPM)
Version: BPC 7.5 NW SP5
Thanks,
VasuThanks Everyone.
" you can write a transformation file and give a new name to those IDs who have values more than 20 characters."
Poonam - Could you explain more?
I tried using a additional Dimension property to hold the 32 char ID. But I cannot access this in the transformation.
Is there a way to refer the dimension property in the Transformation file or in the UJD_ROUTINE BADI implementation?
Thanks,
Vasu -
Switching data between MacBooks (everything from one to the other)
I need a faster notebook for business. My wife's MacBook is newer than mine and has agreed to switch with me.
Both laptops are backed up to the same Airport Time Capsule.
What is the best way to switch the data on both machines, from one to the other?
Thank you,
BillThere are probably other ways to do this.
One way to accomplish what you want to do is to make a current backup of both computers. For an option in case there is a Time Machine problem, I would also make a clone of each hard drive and temporarily store the clone on the Time Capsule.
Boot into the Recovery Volume (hold down command - R or hold down option key) and restart. I would run Disk Utility Repair Permissions and Verify/Repair. Then use Disk Utility to erase the disk. The format is Mac OS Extended (Journaled). Then reinstall the OS.
Reinstall OS
Reboot normally and then attempt to inherit the Time Machine backup for the computer you are working on. Use Setup Assistant or Migration Assistant to restore the backup. Using the same user account name as on the old computer may make things easier.
Inherit a Backup
Inherit a Backup (2)
If for some reason you have trouble inheriting the Time Machine backup, attach the Time Capsule to the computer, mount the clone in Finder, and copy the files you want to restore.
Once everything is completed, you can delete the clones from the Time Capsule to allow more room for the Time Machine backups.
I would seriously consider buying a 2nd Time Capsule and create two separate backups before attempting anything. One backup isn’t enough because hard drives do fail. Time Machine will allow you to backup to 2 disks and will alternate between them. Instead of using Time Machine on the 2nd hard drive, you might want to consider using the second drive to store a clone on because you can make a bootable clone.
Cloning programs.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested -
My iPhone 4s was stolen this weekend and I did the Remote Lock. What exactly does that do? Also, if i do the Remote Wipe will that erase all of my data and impede anyone from ever using the phone?
The remote lock locks the iphone with a passcode that you set. By remote wiping the device it will simply restore it and clear it of all its data, but by doing this it will prevent you tracking it and communicating with it (e.g. remote locking it) in the future
-
How the master data of multi language is shared in the info cubes
hi frindz,
how the master data of multi language is shared in the info cubes
bye bye
venkata ramana reddy.GHi Ventak,
In the infocube you have the key. Then you have a text master data table that has as key (for the table) the key of the value (the one in the cube) and the language, and the text in that language as another field (short, med, long).
Hope this helps.
Regards,
Diego -
Hello,
I have a piece of code that is used for converting files from a shared file area to SharePoint for customers that move to SharePoint and Dynamics CRM. The relation to Dynamics CRM calls for using custom code an not existing conversion tools.
The code I wrote works fine if the file sent to a regular site in SharePoint, but if I try to use the same code for files in the Site Collection. If I use the address for the site collection in the constructor for the ClientContext, and the relative URL
from that for the file, both the upload and the setting of the attributes fails (I do make sure the file is there before trying to set the attributes).
After some experimentation I am able to upload the file, by creating the client context with the main site URL, and adding the site collection path elements ("/sites/crm") to the path for the file, but using the same the setting of the attributes
fails.
I have tried some other variant where the site collection elements are in the path for both the ClientContext and the file path. Then the upload fails, the file retrival (GetFileByServerRelativeUrl) works, but the retrival of the attributes then fails.
The code below illustrates the variations.
Can someone please explain what I am doing wrong, or is this a bug in the SDK?
Regards
Anders
using System;
using System.IO;
using System.Security;
using Microsoft.SharePoint.Client;
using File = System.IO.File;
using SP = Microsoft.SharePoint.Client;
namespace TestSharePointDocumentAttributes
class DocumentAttributeTester
public void Execute(string[] args)
string userId = args[0];
string password = args[1];
string filePath = @"C:\work\TestCV1.docx";
string siteUrl;
string documentPath;
string clientContextUrl;
string serverRelativeUrl;
DateTime createdDate = new DateTime(2013, 2, 1, 11, 20, 45);
DateTime modifiedDate = new DateTime(2013, 3, 1, 11, 40, 45);
string fileName = Path.GetFileName(filePath);
SecureString securePassword = new SecureString();
foreach (char c in password.ToCharArray())
securePassword.AppendChar(c);
// Pass 1, no site collection
Console.WriteLine("Pass 1");
clientContextUrl = "https://losangas.sharepoint.com";
serverRelativeUrl = "/crmn_candidate/TestSPAttributes" + '/' + fileName;
upload(clientContextUrl, serverRelativeUrl, userId, securePassword, filePath);
setVariables(clientContextUrl, serverRelativeUrl, userId, securePassword, createdDate, modifiedDate);
Console.WriteLine();
// Pass 2, site collection, parameters as expected, both upload and set attributes fails (even if file exists)
Console.WriteLine("Pass 2");
clientContextUrl = "https://losangas.sharepoint.com/sites/crm";
serverRelativeUrl = "/kontakter/N/Test1" + '/' + fileName;
upload(clientContextUrl, serverRelativeUrl, userId, securePassword, filePath);
setVariables(clientContextUrl, serverRelativeUrl, userId, securePassword, createdDate, modifiedDate);
Console.WriteLine();
// Pass 3, site collection, parameters adjusted. Upload works and set attributes fails.
Console.WriteLine("Pass 3");
clientContextUrl = "https://losangas.sharepoint.com";
serverRelativeUrl = "/sites/crm/kontakter/N/Test1" + '/' + fileName;
upload(clientContextUrl, serverRelativeUrl, userId, securePassword, filePath);
setVariables(clientContextUrl, serverRelativeUrl, userId, securePassword, createdDate, modifiedDate);
Console.WriteLine();
// Pass 4, site collection, parameters adjusted. Upload works fails, but GetFileByServerRelativeUrl succeds and load items fails
Console.WriteLine("Pass 4");
clientContextUrl = "https://losangas.sharepoint.com";
serverRelativeUrl = "/sites/crm/kontakter/N/Test1" + '/' + fileName;
upload(clientContextUrl, serverRelativeUrl, userId, securePassword, filePath);
setVariables(clientContextUrl, serverRelativeUrl, userId, securePassword, createdDate, modifiedDate);
Console.WriteLine();
private void upload(string clientContextUrl, string serverRelativeUrl, string userId, SecureString securePassword, string filePath)
try
byte[] fileContents = File.ReadAllBytes(filePath);
string fileName = Path.GetFileName(filePath);
ClientContext clientContext = new ClientContext(clientContextUrl);
clientContext.Credentials = new SharePointOnlineCredentials(userId, securePassword);
SP.File.SaveBinaryDirect(clientContext, serverRelativeUrl, new MemoryStream(fileContents), true);
Console.WriteLine("Upload successful.");
catch (Exception ex)
Console.WriteLine(string.Format("Upload error: {0}", ex.Message));
private void setVariables(string clientContextUrl, string serverRelativeUrl, string userId, SecureString securePassword, DateTime createdDate, DateTime modifiedDate)
try
ClientContext clientContext = new ClientContext(clientContextUrl);
clientContext.Credentials = new SharePointOnlineCredentials(userId, securePassword);
Microsoft.SharePoint.Client.File uploadedFile = clientContext.Web.GetFileByServerRelativeUrl(serverRelativeUrl);
clientContext.ExecuteQuery();
ListItem listItem = uploadedFile.ListItemAllFields;
List list = listItem.ParentList;
clientContext.Load(uploadedFile.ListItemAllFields);
clientContext.ExecuteQuery();
FieldUserValue author = FieldUserValue.FromUser("Elisabeth Skaane");
FieldUserValue editor = FieldUserValue.FromUser("Elisabeth Skaane");
listItem["Created"] = createdDate.ToString("MM.dd.yyyy HH:mm:ss"); // i.e. "6/5/2012 10:19"
listItem["Modified"] = modifiedDate.ToString("MM.dd.yyyy HH:mm:ss"); // i.e. "6/5/2012 10:19"
listItem["Author"] = author;
listItem["Editor"] = editor;
listItem.Update();
clientContext.ExecuteQuery();
Console.WriteLine("Set attributes successful.");
catch (Exception ex)
Console.WriteLine(string.Format("Set attributes error: {0}", ex.Message));Hello,
Thanks for your effort, but you are not addressing the problem.
As I tried to explain, setting the date works fine in the case where there is no site collection involved. There is no reason to believe that this will be different when in a site collection. Also the logon works fine in borth cases. The FieldUserValue.FromUser
can take either an email, or a prefered name. I tested both.
Anders -
Master Data cleansing and transformation from non-SAP source systems
Hi all,
Our client (Media)wants to cleanse and transform his master data from non-SAP source system to be uploaded into BW (no R/3 yet). If anybody has a document regarding this topic that i could use, i will appreciate if u sent it to me.
thanks.Hi,
https://websmp203.sap-ag.de/~sapidb/011000358700001965262003
https://websmp203.sap-ag.de/~sapidb/011000358700006591612001
https://websmp203.sap-ag.de/~sapidb/011000358700001971392004
https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000471477&_OBJECT=011000358700008927932002E
/manfred -
SAP BPC 7.5: Master Data and Hierachiy Load from InfoObject
Hallo Forum Participants,
I am going to load Master Data from a "Clarity" Reporting Tool in BW to SAP BPC 7.5 via Process Chains (/CPMB/IMPORT_IOBJ_MASTER, /CPMB/IMPORT_IOBJ_HIER) delivered from SAP.
These Process Chains load the Master Data and Hierarchies from an InfoObject. To find out more about Ticking of BPC I have performed a following test. So, on BPC Admin Interface I have duplicated the Dimension u201CAu201D and called it as Dimension u201CBu201D (in BW site InfoObject u201CAu201D and u201CBu201D). In the Member Sheet of Dimension u201CBu201D I have implemented the several changes und tried to load Master Data from BW namely from infoObject u201CBu201D into BPC Dimension u201CAu201D. Therefor I created a transformation file and mapped one for one IDu2019s. The data Manager started these chains, but resulted nothing (Status: red X).
What are the features of BPC InfoObjects in Comparision with regular InfoObject?
How can I load Hierarchies into InfoObject?
What else I must take into account?
Why does not work this simple test?
Regards.
Alisher
Edited by: Alisher Babaev on Jan 6, 2012 1:59 PMHallo pkrishna,
so it is successed with master data load, but without hierachiies.
My Master Data Properties on Dimension Sheet are:
-ID
-EVDESCRIPTION
-PARENTH1
-CURRENCY
I have mapped as below:
ID=ID
CURRENCY=/CPMB/CURR
/CPMB/CURR- my technical id in BW.
In the Note you advised transformation file has been mapped like below:
-NODENAME=NODENAME
-HIER_NAME=HIER_NAME
-PARENT=PARENT
-ORDER=ORDER
After executing of package i get whether rejected list or log file. No data can be retirieved from InfoObject.
Have you any Idea?
regards -
Dear Experts
I am getting the following error message while adding item in Item Master data. I have modified the following SBO_SP_transactionNotification in SQL server after that could not able to add the item
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20), -- SBO Object Type
@transaction_type nchar(1), -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int -- Result (0 for no error)
declare @error_message nvarchar (200) -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
-- IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
IF EXISTS(
SELECT T0.Price FROM IGN1 T0
where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
-- Select the return values
select @error, @error_message
endHi Rathna,
Just put the SP like this, without the -- before the IF. A -- marks the line as a command therefore you need to uncomment and it will work.
IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
IF EXISTS(
SELECT T0.Price FROM IGN1 T0
where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
Hope it helps -
Master data attribute not updaing from PSA
Hi all,
I am on 3.5, and the have a custom attribute extension to the 0CUSTOMER object. This attribute is populated in R/3, and populated in the PSA, but not the object itself, or the master data table of the object (/bi0/pcustomer). Has anyone seen this before, or can anyone recommend how to trouble-shoot this?
Thanks.
DaveHello David,
Please follow as Sudharshan and Dennis suggested, along with that
1. Check which type of attribute (time-dependent/time independent).
2. Then search accordingly in the table p/q table of customer InfoObject.
3. Try to search in m table of custome (/BI0/MCUSTOMER).
Attribute change run for the particular master data is must to see the data in tables.
4. Just check the Infopackage settings whether the load is till PSA or which option is selected(just to make sure whether the data is loaded till master data tables)- My doubt is the data might be till PSA and not yet processed from PSA to InfoObject, and you are searching the data in master data tables ;-).
Please let us know your findings.
Thanks,
Umashankar -
Master Data Vendor Object access from RFX
HI all,
I am trying to access Master Data Vendor object form RFx. I was able to find a method to get the Vendor reference from Master Agreement using doc.getVendorRef().But i don't find any direct method to get VendorReference from RFx.
Basically i got the Vendorlist from RFX using getVendorList() method (it returns RfxVendorIBeanIfc)and able iterate and get the each supplier. But unable to access Master Data Vendor Object. My requirement is need to access Master Data Vendor object from Rfx. Since RFx has multiple suppliers.
i am unable to access Master Data Vendor Object. its throwing exception.
Code is as Follows:
rfxDocHome = IBeanHomeLocator.lookup(session, RfxDocIBeanHomeIfc.sHOME_NAME);
rfxDocBean = rfxDocHome.find(doc.getObjectReference());
vendCol = rfxDocBean.getVendorList();
itr = vendCol.iterator();
while(itr.hasNext()) {
rfxVendor = itr.next();
mdVendHome = IBeanHomeLocator.lookup(session,VendorIBeanHomeIfc.sHOME_NAME);
mdVendBean =mdVendHome.find(rfxVendor.getDocumentId());
Thanks,
Jali ReddyHi,
Please brief me in details.
My observation - First the Vendor is in nature of A, over a period of time he migrated to nature B,
Onething i can tell u that please add one more field in the output screen from there you can sort it.
Shiv -
Enhance the Master Data field in Datasource from standard source table
Hi Friends Please help me to resolve this, would really be very kind of all of you.
Requirement. I want to Enhance the field ZFACTREG from VIBDBE table in my datasource 0busentity_attr extract structure l_s_REIS_BUSENTITY_ATTR, I want to create the logic in CMOD exit_saplrsap_002 to call my function module for enhancement of master data. Please help me Step by Step
Thanks
Poonam Roy
Step #1
I put this code which gives me error in CMOD like this
ERROR : Das formale Argument 'OTHERS' muss am Schluss der Ausnahmeliste stehen.
ABAP Code#1 IN exit_saplrsap_002
DATA: l_d_fmname(30) TYPE c.
CONCATENATE 'Z_DS_' i_datasource(25) INTO l_d_fmname.
TRY.
CALL FUNCTION l_d_fmname
EXPORTING
I_DATASOURCE = I_DATASOURCE
I_UPDMODE = I_UPDMODE
TABLES
I_T_SELECT = I_T_SELECT
I_T_FIELDS = I_T_FIELDS
I_T_DATA = I_T_DATA
C_T_MESSAGES = C_T_MESSAGES
EXCEPTIONS
RSAP_CUSTOMER_EXIT_ERROR = 1
OTHERS = 2
IF FOUND.
IF SY-SUBRC <> 0.
RASIE RSAP_CUSTOMER_EXIT_ERROR.
END IF
CATCH CX_SY_DYN_CALL_ILLEGAL_FUNC.
ENDTRY.
Step#2
I simple created the Function module Z_DS_BUSINESS
and put the code in source code which gives me error . what should i put in other tabs like"Import", Export", Tables" i kept blank
ABAP CODE give me error : The Dictionary structure or table "FIELD-SYMBOLS" is either not active. i have to remove include in the FM. WHY SO??
FUNCTION Z_DS_BUSINENSS
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_DATASOURCE) TYPE RSAOT_OLTPSOURCE
*" VALUE(I_CHABASNM) TYPE SBIWA_S_INTERFACE-CHABASNM
*" VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE
*" TABLES
*" I_T_SELECT TYPE SBIWA_T_SELECT
*" I_T_FIELDS TYPE SBIWA_T_FIELDS
*" I_T_DATA
*" C_T_MESSAGES STRUCTURE BALMI OPTIONAL
*" EXCEPTIONS
*" RSAP_CUSTOMER_EXIT_ERROR
INCLUDE ZXRSAU02.
WRITE: / 'INSIDE THE Z_DS_MEASUREMENTS PROGRAM'.
TABLES: REIS_BUSENTITY_ATTR,
VIBDBE,
field-symbols:.<fs_REIS_BUSENTITY_ATTR> like REIS_BUSENTITY_ATTR.
DATA: BEGIN OF i_c_t_data OCCURS 0.
include structure REIS_BUSENTITY_ATTR.
DATA END OF i_c_t_data.
DATA: i_c_t_data_copy like i_c_t_data OCCURS 0 WITH HEADER LINE,
begin of i_vibdbe occurs 0,
INTRENO like vibdbe-INTRENO,
ZFACTREG like vibdbe-ZFACTREG,
end of i_vibdbe.
i_c_t_data_copy[] = i_c_t_data[] = c_t_data[].
sort i_c_t_data_copy by vibdbe.
Select INTRENO
into table i_VIBDBE from VIBDBE
for all entries in i_c_t_data_copy
where INTRENO = i_c_t_data_copy- INTRENO.
if sy-subrc = 0.
sort i_VIBDBE by INTRENO.
loop at i_c_t_data assigning <fs_REIS_BUSENTITY_ATTR>.
clear: i_VIBDBE.
read table i_VIBDBE with key INTRENO = <fs_REIS_BUSENTITY_ATTR>-INTRENO
BINARY SEARCH
transporting ZFACTREG .
if sy-subrc = 0.
<fs_REIS_BUSENTITY_ATTR>-ZZFACTORY = i_vibebe-ZFACTREG
endif.
nullI don' t see the dot between the two lines
OTHERS = 2
IF FOUND.
Regards -
Getting data into another collection from UNION of 2 collections
Hi,
I have a requirement like this.
cursor c1 is
select a,b,c,d from abc
UNION
select e,f,g,h from def;
I am replacing cursor with collection variables.
Created collection variables for both the select statements as
select a,b,c,d BULK COLLECT INTO coll_abc from abc;
select e,f,g,h BULK COLLECT INTO coll_def from def;
Now, I want to get the UNION of both these collections into another collection variable.
Can I write
select * BULK COLLECT INTO coll_abc_def from coll_abc,coll_def;Thanks
RajivHi,
I ran into some problem here.
TYPE main_coll is RECORD (
dte_ent_woc date,
sched_beg_dte_woc date,
inst_dte_woc date,
sub_acct_no_woc number,
wo_stat_woc varchar2(5),
wo_key_woc number);
TYPE main_coll_typ IS TABLE OF main_coll;
main_collection_union main_coll_typ;
-- Declaration Ends
BEGIN
err_loc := 10;
file_name := '14932_welcome_call_' ||
TO_CHAR(TRUNC(SYSDATE), 'YYYYMMDD') ||
'.txt';
file_handle := UTL_FILE.fopen('/apps/custsrv/custsrv/data/output',
file_name,
'W');
UTL_FILE.put_line(file_handle,
'"DV DATE"~"SCHEDULE DATE"~"INSTALL DATE"~"ACCOUNT
#"~"ADDRESS1"~"ADDRESS2"~"CITY"~"STATE"~"ZIP"~"ACTIVATION DATE"~"CURRENT BALANCE"~"DV STATUS"~"ACCOUNT
STATUS"~"RESTART DATE"~"IS DV LAST?"');
err_loc := 20;
SELECT dte_ent_woc,
sched_beg_dte_woc,
inst_dte_woc,
sub_acct_no_woc,
wo_stat_woc,
wo_key_woc
BULK COLLECT INTO main_collection_union
FROM ((SELECT dte_ent_woc,
sched_beg_dte_woc,inst_dte_woc,
sub_acct_no_woc,
wo_stat_woc,
wo_key_woc
FROM woc_base_comp
WHERE
wo_typ_woc = 'DV'
AND MOD(INSTR(wo_rsn_woc, 'BF'), 2) != 0)
UNION
SELECT /* index(a DTE_ENT_WOO_I) */
dte_ent_woo,
sched_beg_dte_woo,inst_dte_woo,
sub_acct_no_woo,
wo_stat_woo,
wo_key_woo
FROM woo_base_open a
WHERE
wo_typ_woo = 'DV'
AND MOD(INSTR(wo_rsn_woo, 'BF'), 2) != 0
AND wo_stat_woo in ('X','O')
);When I compiled, I got these errors...
Error(146,10): PL/SQL: Statement ignored
Error(146,51): PLS-00302: component 'SUB_ACCT_NO_WOC' must be declared
Error(155,10): PL/SQL: SQL Statement ignored
Error(159,35): PL/SQL: ORA-00904: "MAIN_COLLECTION_UNION"."DTE_ENT_WOC": invalid identifier
.I understand that the declared collection is not being recognized.
But, I am not getting where to declare and where to define the collection.
Any help regarding this would be appreciated.
Thanks
Rajiv -
Error while loading customer master data through Idoc (DEBMAS) from BODS
Hi All,
I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below.
I checked in TSKD table the entry 0 is present. Please help me to resolve this issue.
Thanks & Regards,
Balamurugan GHi, did you referred this link : Error during customer master mass update through XD99
Maybe you are looking for
-
PLS-00201 identifier must be declared
Hi All, Can any one please help me regarding this error. I am getting the PLS-00201 identifier tree_sorting must be declared at the line " Tree_Sorting(1, 0); ". if i comment the " Tree_Sorting(1, 0); " at pkgfc_gi.v_cphase := '01-13'; and uncomment
-
Media Encoder CS4 output file size varies--why??
I was batch encoding several files yesterday, and one of the files failed. Adobe Media Encoder provided no details, other than when I hover over the yellow exclamation point error icon, it says: "Error compiling movie. Unknown error." Very insightful
-
SendObject in Access 2003 not working with IBM Notes 9
Using a Access 2003 program - My employer uses LotusNotes and just upgraded to IBM Notes 9. I have a button on a form that set up an email and created and opened a new email in LotusNotes using the docmd.sendobject structure. It worked great - I w
-
Authentication for user weblogic denied seen in Weblogic 8.1 bea logs
I am observing the below error in bea logs of one of my managed servers. The managed server is in running state but the most of the Bridges are inactive with description "WARN: failed to connect to the source". Below is the error seen. ####<Mar 29, 2
-
Image Sequence is too fast- Why?
Footage: 1080p23.97 Timeline: AVC 1080p23.97 Process: export a tiff seq to external HDD > open PScs5 and opened 1st frame > Recorded action with healing brush > in PScs5 i went to file, Reveal in Bridge > in bridge i selected all and went- tools, pho