PP Order settlement at Cost Center

Hi! Gurus,
We have peculiar requirement of settleling PP order at Cost center, client is asking for correct cost center to be pop up as settlement receiver.
moreover we can not remove default receiver(material) otherwise it won't allow GR.
Now the thing, is there any means by which we can populate settlement receiver as "particular" cost center during the order creation, as second line item?
OR
Is there anymeans to put validation, as if correct Cost center would not be selected it will terminate Order creation?
Looking forword expert advice.
Regards,
Asheesh

Hi Ambi ash,
To achieve this you have to activate a user exit/form exit & substitutions in CO module. Your CO Consultant should be able to help you out.
Thanks & regards
Mahesh babu

Similar Messages

Plant maintenance order settlement to cost center

Hi,
I have a requirement from the client that PM order costs should be settled to Cost center (real) and credit the order line with statistical cost center.
1. Consumables GL is debited at the time of goods issue with refrence to PM order , cost center is not updating in this line item
2. Settlement rule maintained as cost center receiver which is mentioned in the PM order and after settlement consumables GL is getting credited with Order and debit to cost center mentioned in settlement rule , statistical cost center is not updating in credit line
My client requirement is
Statistical cost center should update along with Maintenance order at the time of goods issue for consumables GL (Debit)
Statistical cost center should update along with maintenance order at the time of settlement for PM order (Consumables GL credit with statistical cost center and maintenance order and the same GL debit with settlement receiver cost center (real)).
If i provide cost center in account assignment at the time of Goods issue , system is updating the cost center along with order , however at the time of settlement both cost center and order are not updating in credt line item and the cost is lying in the order without settling.
Please advise any configuration setting or user exit to meet the above requirement.
Thanks,
Sreedhar

Hi Ravi,
Thanks for the update.
If i give the cost center in acct assignment in MB1A it is taking , is there is any option to default the cost center either from PM order or thru some other setting.
I have tried both substitution and OKB9 , however system is not defaulting the cost center from this settings.
Please let me know if there is any other option to default the cost center in MB1A.
Thanks,
Sreedhar P

Process order settlement to cost center

Hi,
We have a requirement to settle only the quantity to material and the costs to
cost center from the process orders. This is to ensure the materials are
handled as non-valuated and the COGM is computed from the goods consumption
postings.
The process orders will have both co products and by products as well.
There is also one more requirement to allow Purchase orders against the non-
valuated materials.
I am planning to propose the following :-
1) To make the materials valuated but set the standard price to zero to give
the effect of non-valuated materials and at the same time can also raise
purchase orders because otherwise non-valuated materials cannot be used to
raise Purchase orders.
2) When goods receipt happens from the process order the actual costs of the
process order will remain as it is in the process order since the standard
price of the FG is zero and only the quantity will be received into inventory.
3) When process order settlement happens the full actual costs will be settled
to a price difference account and cost center tied to the price difference
account.
Do you guys see any flaws in the above design?
Edited by: FICO Consultant on Feb 21, 2012 4:28 AM

Answered

PM Order Settlement to Cost Center(real) & Internal Order simultaneously

Dear Experts.
I have a request from client to settle 100% of PM order to Cost Center (real) and internal order (statistical) simultaneously. The purpose of statistical orders is to capture all the expenses (electricity, water, security charges, maintenance, etc...) location-wise.
PM Order settlement through statistical IO will contribute to the maintenance aspect, and other expenses will be captured to statistical IO through financial GL posting. Hence each location will have a unique statistical order maintained.
In the settlement Profile, I have maintained Order and Cost Center elements as "Settlement Optional" Under "Valid receivers". But the system doesn't allow this settlement. As per my understanding SAP allows settlement (100%) to go only to a single object.
Appreciate your inputs on this matter.
Thanks,
thushantha.

hi,
Please check how you maintained the real object in the settlement rule.
You must maintain both the cost center and internal order on the same assignment line such as:
CAT:     Settlement receivers
ORD      ORD_Number   Cst_Center_number         100%   PER
The system will correctly generate KI178 if you have the following:
CAT:     Settlement receivers
ORD      ORD_Number                              100%   PER
CTR      Cst_Center_number                       100%   FUL
regards
Waman

Settlement receiver (cost center) for an PM order

Hi Gurus,
In which table I can find the settlement receiver (cost center) for an PM order??
Thanks.

Settlement distribution rules are stored in table COBRB.
Regards
Sreenivas

Costs to be recorded to Internal Order instead of Cost Center

Hi,
My client has created a new Personnel Area and has started hiring people for it. They did not create a cost center for this. Meanwhile, if any costs are to be recorded for the employees in this Personnel Area, the client wants them record to an Internal Order (instead of Cost Center). Later, when they create a cost center, they may transfer the costs from Internal Order to the Cost Center.
What needs to be done to satisfy this scenario.
Best Regards,
Veera

hi
create internal order through kO01, which is of type real order, and post all the expenses by keeping this internal order as cost object. later as you want to settle this internal order to cost centre, you should have settlement profile attached to the internal order to settle that. please update settlement profile while creating the internal order
krishna

Internal orders/networks and Cost center

is it correct to say, all internal orders and process orders will roll into a cost center at the end.
Sri

Hello Ganga,
You can settle the costs collected on an internal order to one cost center, one G/L account, or one business process using one settlement cost element.
Hene, it is not necessary that all internal orders will roll in to a cost centre at the end.
Rgds
manish

PM order settlement to the center.

hi,
I want to know is there any report available which shows the settlement amount from the PM order to the cost center.
The report must be cost center-wise.
Thanks in advance.

hi
check the information system under cost center accounting

Internal order posting vs cost center

HI,
I have a requirement like this; in our company we have allowed the posting to be made only through internal orders no
direct cost center postings are allowed. Is there any report to carry out a comparison between internal order posting and cost center postings? I just want to check the transaction which directly posted to cost center instead of internal order.
please help.
thanks
best regards
gayani

Hi,
Do you want to trace postings which were done only on cost centres without I/O? You can go to KSB1 and select the line where Auxiliary account assignment is blank - this will mean that these lines were posted only to cost centre.
Also, if your I/O are real one, you can select in KSB1 postigns with '4' value type, which will mean that the posting on cost centre is real and not statistical; therefore, no postings on I/O happened.
Regards,
Eli

Wbs settlement to cost center

Hi Gurus,
We have project sysyem, FI and cost and profit center accounting.
We are booking cost and revenue on wbs and then we are settling it to cost center.
Do we really need to settle to cost center what is the need and what is the correct process???
Thank you

Hi Mohit
It is against SCN's rules to post the same discussion thread twice. You have already posted a similar question in the below thread. Please refrain from doing this and close one of the threads.
Initial balance upload of revenue GL accounts with wbs
Regards
Sowmya

Integrate Employe with internal order other than cost center

Dear Experts,
Integrate Employe with internal order other than cost center
Thanks & Regards,
Mythili
Edited by: Mythili.R on Jan 10, 2012 1:45 PM
Edited by: Sikindar on Jan 10, 2012 6:23 PM

Can use IT0027 at employee level or IT1018 at OM level

KSPP error: Plan/SOP order &: Reference to cost center/activity typ

Dears,
I need to know how to correct the error: "Plan/SOP order &: Reference to cost center/activity typ" that I received when I run the KSPP.
Error code kp603.
Thanks in advance
KR
Vincent

Hi everbody,
I found that when we have a formula in Resource -> Costing view but no quantity ( zero ) in Standard Value for operations (Master recipe) then we face the error.
Other tips could be found in sapnote 1770587 and sapnote 380282.
I hope this help to solve the issue.
Regards

Direct GRN (non order items) to cost center for Non Stackable Materials

Hi All,
We can do direct GRN (non order items) to cost center for Non Stackable Materials.
If it is possible.Please advice me
Thanks In adance

Hi,
Your question is not clear.
Ok.
If you want to issue goods to cost center you can use 201 movement type.
If you want do create automatic PO in back ground during goods receipt, you can do it with customization. For automatic PO creation during goods receipt, you can search in SDN, you can get the answer.
Regards,
Biju K

Can i settle one order to different cost center

Hi experts
pls solve my problem
i posted some expenditure to one order
one order expenditure : salaries 2500, rent 1500 , Travelling exp 3500
here i need post salaries to cost center admin-1001
and i need to post rent , travelling to cost center Markeing-2001
is it possible or not
if , how tell me the process
Regards
Rams

Hello Rams
What ever the settlement u r going to do in IO are dependent on the settlement rule u have defined in SETTLEMENT PROFILE in KOA1
whereu have to
activate the check box %
activate the amount settlement - activate,.
the radio button to be settled in full to be activated.
U can settle the costs of the orders partly to diffrent cost centers as required. ( as u have explained)
again u check it out in KOT2 ( creation of order type) wheather u have activated
CO PARTNER ACTIVATED X ( active)
Hope u would be able to solve the problem
Expecting some valuable points if it is useful
Thanks

Settlement of Cost Center And Production Order Variance

Dear All
I have just started to learn SAP Controlling. I am able to get hold of some materials on Controlling. May I request the experenced forum memebers to please explain the following
1. How data flows from FI to CO and PA
2. When cost center and production orders are settled, how the variance are settled and which accounts/ modules get effected
and a source where I can get some material on this topic. Your immediate replies and valuable peice of advice will help me a lot
Thanks
Arvindh

Dear All
I have just started to learn SAP Controlling. I am able to get hold of some materials on Controlling. May I request the experenced forum memebers to please explain the following
1. How data flows from FI to CO and PA
2. When cost center and production orders are settled, how the variance are settled and which accounts/ modules get effected
and a source where I can get some material on this topic. Your immediate replies and valuable peice of advice will help me a lot
Thanks
Arvindh

PP Order settlement at Cost Center

Similar Messages

Maybe you are looking for