PP-PI How can i generate two material creation(101) in a single operation.

i am creating a process order for material fert material A having 2 operation in the recipe i want to carry out consumption of roh material b1,b2,b3 (261 mvmt) when i confirm order & i also need halb product generation C (101 MVMT) when i create GR.that is mb31. for first operation.the second operation has to consume material C.(which is produced from operation one) & consume d1,d2,d3 roh material & mb31 should generate halb material E & order header material A.
HOW CAN U DO THIS?
when i confirm first operation i can consume b1,b2,b3 & when i do mb31 for gr gainst then system generates both material,  A  & C & further possibility is not possible?
can any one help me in this?
pl. help asap
thanks
kareena

Hi,
Please check this link about co-products (co-product and by-product):
http://help.sap.com/saphelp_46c/helpdata/en/89/a433e6461e11d182b50000e829fbfe/frameset.htm
1. You have to write in your BOM both with negative sign.
2. In case of co-product scenario you have to mark the co-product indicator in material masters of both BOM-header material and co-product (co-product is the material in the header's material BOM with negative sign) (co-product checkbox is on one of the MRP views...maybe on MRP2...)
3. You have to mark the co-product checkbox for the co-product in BOM (select co-product BOM item in CS02 > menu > Goto > item...I don't know by heart but you can find on general data tab of the BOM item in CS02)
4. Please define a proportion rate for BOM-header material and the co-product (it is in material master of header material > check the link)
(in case of by-product step1 is enough)
a) you can confirm BOM-header (mvt 101), by-product (mvt 531) and components (consumption, mvt 261) in CO15 / CO11N.
b) co-product and BOM-header can be confirmed only in MB31 (mvt 101), components can be confirmed in usual way. No automatic confirmation is possible for co-product.
Please use the search function of the forum in this issue to get more details.
BR
Csaba

Similar Messages

  • HT1660 How can I maintain two separate itunes accounts on one single device without erasing either set of data?

    How can I maintain two separate itunes accounts on one single device (iPhone 4) without erasing either set of data when syncing with itunes?

    Hi,
    Depends on what you trying to setup but for purchases, you can roll down at the very end of the iTunes/AppStore pages to logout of your current account and then login into a different one.  Then your purchase will be billded to this new account.  Everything will sync as you used to but in order to use the purchased content in iTunes or other devices, you will need to authorize them (you can have up to 5 devices authorized for an account).

  • How can I Generate two different reports from single execution of Test cases in NI teststand

    Hi,
    My requirement is to generate two different reports from NI teststand. One for the Logging of error descriptions and the other report is by default generated by the Teststand. How can i generate a txt file that contains error descriptions other than that mentioned in the default report?
    Solved!
    Go to Solution.

    Do you need to do that just for these two sequences but not for other sequences? I don't see a problem to use SequenceFilePostStepRuntimeError. Create this callback in both sequence files and configure them to log into the same file. SequenceFilePostStepRuntimeError callback is called after each step of the sequence file if it has runtime error. You can access the calling step error information via RunState.Caller.Step.Result.Error property. Take a look to attached example.
    The "other way" is useful if you need to log errors not for every step of the sequence file, but for some of them. This is more complex, because you need to create a custom step types for these steps. For the custom step you can create substeps (post-step in your case) which will be executed every time after step of this type executed. Then, this is you job to determine if error happened in the step, acces to step's error information is via Step.Result.Error property. 
    Also, be aware that step's post-expression is not executed in case of error in the step.
    Sergey Kolbunov
    CLA, CTD
    Attachments:
    SequenceFilePostStepRuntimeError_Demo.seq ‏7 KB

  • How can we give two name for a single material ??

    Hi friends
    how can we give two name for a single material ??
    e.g.. if single material is sold to different customer by different names
    then how can we do that ??

    Yes
    you can achieve it thro CMIR in T code VD51
    Go to T code VD51 choose that customer and material combination and click on to its details blue lens on application tool bar
    In the screen which is coming ,enter your description in the CUSTOMER DESCRIPTION tab the second one and save
    Now create a sales order and see
    Your requirement will be fulfilled
    If a material is pen description is ball pen in material master and for customer A you have defined it as Pen 1 and description as Super ball pen in VD51
    If a material is pen description is ball pen in material master and for customer B  you have defined it as Pen 1 and description as  VerySuper ball pen in VD51
    Now in sales order the description will appear as Super ball pen for Customer A
    Now in sales order the description will appear as Very Super ball pen for Customer B
    Hence the material pen whose description is ball pen in MMR will appear as super ball pen for customer A and very super ball pen for customer B
    Hope you have checked the field info record in VOV8
    I have tried this tested this and getting it
    Regards
    Raja
    Edited by: ramanathan raja on Dec 8, 2008 5:54 PM

  • How can i generate session.xml file?

    hello
    i am a beginner of toplink,i find that in my project,i must provide two xml format files,they are "session.xml" and a project xml file,to make the toplink works well,the project descriptor can be generated by using the mapping workbench,but how can i generate the "session.xml",now,what i can do is to modify the sample file that come with the toplink installation,i wonder if there is a graphic tool that can be used to generate it?
    thanks for any helps!

    Currently there is no UI support for creating or modifying sessions.xml. The DTD is provided in both the documentation as well as in the installed files (<TOPLINK_HOME>\core\sessions_4_5.dtd). The examples should also contain a variety of sessions.xml file to assist you.
    Doug Clarke
    Principal Product Manager, Oracle9iAS TopLink
    Oracle Corporation

  • How can we use two BOM

    Dear all,
    my scenario is in this way way-
    how can we use two BOM for same material.first BOM for inhouse production. Second one for Subcontracting.(means i have to create Purchase order for partial qty.

    Dear
    1.Goto MM02-MRP4 view -Maintain two Production Version based on two BOM ( Alternative1 with Routing will be PV1 will be used for production in house  where as Alt2 with routing having PP03 as control key for external operation -PV2 )
    2.Assign the relavant production Version-PV2 in Subcontracting Info Record in ME11
    Now, based on the production version assigned in Info Record system suggests the BOM while BOM explosion in Subcon Purchase Order
    REFER : Subcontracting & BOM  alternative
    Hope this will solve your issue
    Regards
    JH
    Edited by: Jiaul Haque on Sep 29, 2010 1:27 PM

  • How can I have two itunes accounts on one computer?

    How can I have two itunes accounts on one computer?

    Not sure what you mean.
    An account is a user name and password.
    Sign into whichever account you want to use for purchasing.
    Authorize the computer for both account to listen to the content.

  • How can I combine two itunes accounts into one?

    How can I combine two itunes accounts into one?

    Items purchased from the iTunes Store are permanently associated with the account from which they were originally purchased.  Apple provides no way to change this.
    However, if you wish to put content from two accounts into a single iTunes library, you can easily do so.  Use the command File > Add File (or Folder) to Library.

  • How can I share two differents Itunes accounts in my Apple TV ? I have one and my wife has another account and we want to share both in our apple tv. How can I do this ???

    How can I share two differents Itunes accounts in my Apple TV ? I have one and my wife has another account and we want to share both in our apple tv. How can I do this ???

    I assume you have different iTunes collections on different PC's, or on different logins on the same PC?  If that's the case then just enable "Home Sharing" in each iTunes using the SAME iTunes username and password as you enabled home sharing on the Apple TV with. The account used for home sharing is NOT the same as the account used to access the iTunes store, so as long as you use the same account (pick one, doesn't matter which) then you should see both of yor iTunes libraries on the Apple TV. Note - each iTunes has ti be running in order for the Apple TV to see the library.
    Here's some details on how to do it:
    http://support.apple.com/kb/HT4363

  • How can we have two different Itunes libraries on one computer?

    How can we have two Itunes accounts on one computer?  I found info on the itunes help page but I do not know how to follow the steps given because I am not prompted with what it says I should be prompted with? Please help I don't want to delete one of our libraries

    Launch iTunes with the Shift key held down as needed, or use different Windows XP user accounts.
    (74282)

  • How can I use two displays with my Mac Mini?

    How can I connect two displays to my Mac Mini (newest generation with one thunderbold and one hdmi)?

    Have you tried connecting one to the HDMI output, and another to the Thunderbolt port (with the appropriate Mini DisplayPort-to-other connection adapter as needed)?

  • HT204053 How can I sync two different email accounts?

    How can I sync two different email accounts? All of this Mobile Me and cloud stuff got me all flustered and now I have two accounts possibly 3.

    How to use multiple iPods, iPads, or iPhones with one computer

  • How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

    How To Using Two Different Public IP Address on My DMZ with ASA 5520
    Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
    Hi everyone out there.
    can any one please help me regarding this situation that im looking for a solution
    My old range of public ip address are finished, i mean (the 41.x.x.0 range)
    So now i still need to have in my DMZ another two servers that will bring some new services.
    Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
    So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
    ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
    So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
    on Cisco ASA 5520 v8??
    How my configuration should look like?
    I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
    Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
    attached is my network diagram for a better understanding
    I thank every body in advance
    Jorge

    Hi,
    So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
    Now you have gotten a new public IP address range from the ISP and want to get it into use.
    How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
    To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
    So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
    Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
    Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
    Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
    Of the above ways
    The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
    The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
    Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
    I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
    - Jouni

  • How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?

    hello,
    How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?
    thanks,
    Jay

    Hi,
    I understand that it applied first logo to all other sub sites.
    Please make sure that you change the logos in the subsites.
    If we change the logo in the root site, the logos in the subsites will be changed at the same time.
    However, we can change the logo in the subsites separately.
    We can go to a subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo->select a picture, then it will has a different logo than the root site.
    Then go to the other subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo-> select another picture, then it will has a different logo that the first subsite.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How can I use two accounts ?

    How can I use two accounts (mine and my wife's) to PhotoStream to my mac? I have to turn off photo stream for one or the other...can't I just leave two accounts logged on so that the photos from my iphone and hers both go to my mac?

    Photostreaming across machines requires to use the same Apple-ID on all of these machines or devices. Share all of iclouds account stuff or nothing at all . No way around as icloud is designed that way. Photostream is not designed as a sort of gallery to share with outsiders. It is for your personal entertainment .

Maybe you are looking for