PP PI resource selection with phase qty
Hi,
I used resource selection for the tank selection.
Currently the classification is only base on the coating.
Now there is several same coating tank with different volume.
Is that possible i create characteristic for phase quantity,
so the resource is selected via phase quantity and coating ?
for example
resouce
1. tank XX coating A 1000 L
2. tank YY coating A 2500 L
So if order charge for 750 L, the system will select resource tank XX (based on coating A and 0 < X < 1000 L)
I got this idea because i can populate GR date in batch characteristic when do GR and selected based on FIFO, so i think
characteristic in resouce selection can be populated with vakue automatically for phase qty too
Is there any idea?
Best regards,
Freddy Ha
Edited by: Freddy Halim on Jun 21, 2010 9:44 AM
Hi,
I am not sure but you can do it by using resource network concept.
Where you need to cretae class charecteristic based on your volume of vessal.
Nedd some work around but I think you can do it by same concept.
Regards
SANIL
Similar Messages
-
Problem with process order resource selection condition
I face a problem while trying to release process order as i am getting an error as "Resource XXXX assigned to operation 20 does not meet resource selection condition".What may be the reason for this.how to check and rectify...
Please help.hi,
I think you have been using a work center in place of resouce.
Actually
Resource catagory = 0008 is assign to Application C (Recipe) & only use in Recipe Creation.
Work Center catagory = 0005 is assign to Application N & R( Routine & Refernce operation set) & only use in Routine Creation.
Parminder -
Resource Selection on Training and Event Management (PE) can't find it
Dear All,
I've been going nuts over this Resource Selection option. I choose to create an event with resources, but I can't find the button nor the menu option that brings the Resource Selection screen.
I'm using EHP4 FOR SAP ERP 6.0 / NW7.01
I'd appreciate any help.
Thanks,
AleOk, found it
Turns out that the event types I was using were not created with resources linked to them, that's why I couldn't find them
Thanks if you took the time to see this
Cheers, -
Query on resource selection condition
Hi All
I have a process order with a operation having a resource selection condition.In the classification of the master recipe i have entered the resource name(as characteristic value) as X whereas the name of the resource where the operation is to take place is A and in the classification of the resource A i have enter the characteristic value as "A".
Now is it possible to release the process order without getting the error message :"Resource in operation does not satisfy resource selection condition".
please advice.Hy,
Kindly go through below link it might be give some inputs if some data is missing in your condition.
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/89/a42678461e11d182b50000e829fbfe/frameset.htm]
Regards,
Dhaval -
Removing calls that are in the resource selection queue
Hi Folks, I have a strange query. Is there any way to remove calls that have been presented to the resource selection step but are in the queue waiting for a free agent? I have created a varable that gets the current time and then created another varable that is poplated with the same syntax that is received from the T[now] step then done a IF atep with a > between to check if the current time varable is greater than the other varables but thi sis then applied after the queued after the select resource step but it doesnt work obviously BUT I was wondering if it can be. If the system has already accepted a call and tried to present it to an agent, can it be removed?
ThanksI think I see clearer now.
Ok, so what you want to do is very logical and good practice. Instead of doing the time stamps, which will work, you could just use the time of day step.
Also, if you wanted to take it a step further, you could take the callers Estimated Wait Time (EWT) from the Get Reporting Statistics step (not all that accurate, but could be a good guess at times), and then see if the closing time (5:00 in your example) is more than the number of minutes away held in EWT, from the current time.
Example: Caller calls in a 4:55, and you close at 5:00. The EWT says they'll wait only 1 minute, then you queue them. However, if the EWT says they'll wait 8 minutes, then you do not queue them, and tell them you're already closed.
Just a thought, but it does sound like you are doing it right. I have seen too many times to count, people forgetting to put logic within the queue loop to cover things like business hours, day changes, holidays, no agents logged in, etc.
Good luck and happy scripting!
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches. -
Asset Creation in PR and PO and MIGO as a single Line item with "N" qty
Hi All,
In Purchase requestion ME51N
Now we are creating "n" number of assets ( All are same item but "s.no" will vary) with "n" number of line item.
Instead of this I have to enhance to create only one line item( For same item) with "n" quantity.
for the ASSET account Assignment we have to create Asset(Temp no) for the each item/quantity(if the same item).
as well as if they are going to create a PO with ref to PR they have to see all the "n" number of asset no.
In MIGO creation for each asset we have to assign S.No and Asset Tag.
How enhance the functionality in PR,PO and MIGO as well as in Invoice.
Is it any User Exit/BADI is available for PR/POand MIGO to show all the "n" number of assets for a single line item.
Kindly help me to give details to proceed further.
Thanks in advance.
sharmaHi Sharma,
What i understand from your question is, you want to create a single line item in PR and PO. But the qty would be > 1.
Each single qty would have its own asset number in account asssignment tab of item details of PR & PO.
This is what you are expecting...Right???????????????
Then this is possible with certain limitations.
While creating PR, enter only one item with more qty.
In item details section, in account assignment tab, on top left corner, there will be a button called Multiple account assignments.
Click on it, then it looks like a table, where you can enter more than one line. (each line will have its own asset no)
And choose option Distribute on qty basis for field Distribution.
So that you can enter 1 qty for each line. ( Ex: if you created one line item in the item level with 10 qty, you need to maintain 10 line here, each qith 1 qty and diff asset no).
The only limitation to this is, the GRN would be treated as non valueted. So when you make GRN there wwould not be any accounting doc. ( means no use of GR/IR clearing account as like normal for POs)
when you prepare MIRO, all the assets will be capitalised and vendor credited.
But in case if you receive partial invoice, then you have choose manually in MIRO. which asset is ot be capitalised.
After entering the PO number in MIRO, there will be one line will be appeared with full qty. in the same line, move till the end of line, there you will have one button called Account assignments.
Choose and go there, here you can choose which individual asset line to be considired.
This will resolve your issue.
Thanks,
Srinu
SRBORIGI_MULTIPLE ACCOUNT ASSIGNMENTS -
Database selection with invalid cursor !
hi experts,
When execute SAP BW processchar, it occur some system error: (sm21)
Database selection with invalid cursor
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed).
this error occur when apply bw support package 19.
sap notes 1118584 Solution is: Import Support Package 17 . but my support package is 19.
how can i solve this error?
thanks,
xwu.I am only assuming things, but it might be worth to look closely if you were experiencing an ORA- error during the execution. This could have caused a rollback and thus closed the cursor. Please check the job log, the workprocess trace (dev_wX file) and the system log SM21 and ST22 as well.
Besides that check the oracle alertlog and the usertrace destination.
Best regards, Michael -
Database selection with invalid cursor with MaxDB database
Hi Experts,
I encountered the this error:
"Database selection with invalid cursor
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed)."
We are using bw support package 19 early this month. Previously is working fine but this problem occured from the last 2 days.
We are using MaxDB database.
Really appreciate any speedy responds.Hi,
We finally resolved the issue.
The solution:
We check the RFC connection test in SM59. There are connection error.
There is an error that related J2EE_ADMIN user.
SO we reset the J2EE_ADMIN id in SU01.
The problem goes away.
Many thanks -
Load data error: Database selection with invalid cursor (sm21)
hi experts,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.I have solved this issue, The Oracle checkpoint not complete.
thanks,
xwu. -
Processchar occur error: Database selection with invalid cursor (sm21)
hi,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.I have solved this issue , The Oracle checkpoint is not complete.
thanks,
xwu. -
Database selection with Invalid Cursor error in RSDRI_INFOPROV_READ
Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful.Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful. -
Hi
I want to create a app redirecting to my mebsite.This app permit to select a "area" selected on a UICollectionViewController, and an "event" selected with a UITableViewController.
I need to integer both informations on the FinalViewController (called in my app AnnoncesViewController) =>
The fisrst array is selected on CollectionViewController:@"http://carnet-du-jour.com/index.php/component/ohanah/?option=com_ohanah&view=e vents&Itemid=0&ohanah_venue_id=21"
The second array is selected onUITableViewController:@"&ohanah_category_id=1&textToSearch="
The final array must be:http://carnet-du-jour.com/index.php/component/ohanah/?option=com_ohanah&view=eve nts&Itemid=0&ohanah_venue_id=21&ohanah_category_id=1&textToSearch=
How can I integer these 2 NSArray to obtain this result to link to a UIWebView as FinalViewController?
Thank you for your help!!
My App is on Drobox:https://www.dropbox.com/s/43l1p2hj5bqamvn/Carnet%20du%20Jour.zip
Gracefully
RémySpehlerHi
I want to create a app redirecting to my mebsite.This app permit to select a "area" selected on a UICollectionViewController, and an "event" selected with a UITableViewController.
I need to integer both informations on the FinalViewController (called in my app AnnoncesViewController) =>
The fisrst array is selected on CollectionViewController:@"http://carnet-du-jour.com/index.php/component/ohanah/?option=com_ohanah&view=e vents&Itemid=0&ohanah_venue_id=21"
The second array is selected onUITableViewController:@"&ohanah_category_id=1&textToSearch="
The final array must be:http://carnet-du-jour.com/index.php/component/ohanah/?option=com_ohanah&view=eve nts&Itemid=0&ohanah_venue_id=21&ohanah_category_id=1&textToSearch=
How can I integer these 2 NSArray to obtain this result to link to a UIWebView as FinalViewController?
Thank you for your help!!
My App is on Drobox:https://www.dropbox.com/s/43l1p2hj5bqamvn/Carnet%20du%20Jour.zip
Gracefully
RémySpehler -
Resource booking with Windows 8.1 and office 2010
I've two SP3 Laptops running 8.1 on out network. I've Office 2010 installed on these and they are mostly working fine;
However they cannot book resources - this is a common win7 fault we would fix here - http://support.microsoft.com/kb/982774/en-gb
But its not working under Win 8.1, neither the fixit icon or the manual config.
We are presently running exchange 2003
Is there a 8.1 2010 fix you know of?
Many thanks,
Stuart
I asked this yesterday of this forum -
http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/resource-booking-with-windows-81-and-office-2010/1b52161c-eb71-4dd5-a19e-14a4fdfe0abb
, but they said that this pro forum was more suited for more technical issues.
StuartHi,
Currently I don't have the exact same environment to test, please make sure you have modified the registry keys correctly and if possible, try this manually on multiple Windows 8.1 machines to see if this is an individual issue or widely affected. If this
fix doesn't work on all Windows 8.1 machines, please provide feedback or to report this issue with this solution, please leave a comment on the "Fix it for me" blog or send an
email message.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Delete statement that uses a sub-select with the statement in the cursor
Hi all,
How to write write a delete statement that uses a sub-select with the statement in the cursor?
CURSOR excluded_dates IS
SELECT TO_TIMESTAMP(report_parameter_value, in_date_format_mask)
INTO my_current_date_time
FROM report_parameters
WHERE report_parameters.report_parameter_id = in_report_parameter_id
AND report_parameters.report_parameter_group = 'DATE_TIME'
AND report_parameters.report_parameter_name = 'EXCLUDED_DATE';
OPEN excluded_dates;
LOOP
FETCH excluded_dates INTO my_excluded_date;
EXIT WHEN excluded_dates%NOTFOUND;
DELETE FROM edr_rpt_tmp_inclusion_table
WHERE TO_CHAR(date_time, 'mm/dd/yyyy') = TO_CHAR(my_excluded_date, 'mm/dd/yyyy');
END LOOP;
CLOSE excluded_dates;ThanksHi,
In such case I think is better to create a view an perform the delete using it. Example (using HR schema):
Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
Connected as hr
SQL> create or replace view v_employees as select * from employees where first_name like 'J%';
View created
SQL> select * from v_employees;
EMPLOYEE_ID FIRST_NAME LAST_NAME EMAIL PHONE_NUMBER HIRE_DATE JOB_ID SALARY COMMISSION_PCT MANAGER_ID DEPARTMENT_ID
110 John Chen JCHEN 515.124.4269 28/09/1997 FI_ACCOUNT 8200,00 108 100
112 Jose Manuel Urman JMURMAN 515.124.4469 07/03/1998 FI_ACCOUNT 7800,00 108 100
125 Julia Nayer JNAYER 650.124.1214 16/07/1997 ST_CLERK 3200,00 120 50
127 James Landry JLANDRY 650.124.1334 14/01/1999 ST_CLERK 2400,00 120 50
131 James Marlow JAMRLOW 650.124.7234 16/02/1997 ST_CLERK 2500,00 121 50
133 Jason Mallin JMALLIN 650.127.1934 14/06/1996 ST_CLERK 3300,00 122 50
139 John Seo JSEO 650.121.2019 12/02/1998 ST_CLERK 2700,00 123 50
140 Joshua Patel JPATEL 650.121.1834 06/04/1998 ST_CLERK 2500,00 123 50
145 John Russell JRUSSEL 011.44.1344.429268 01/10/1996 SA_MAN 14000,00 0,40 100 80
156 Janette King JKING 011.44.1345.429268 30/01/1996 SA_REP 10000,00 0,35 146 80
176 Jonathon Taylor JTAYLOR 011.44.1644.429265 24/03/1998 SA_REP 8600,00 0,20 149 80
177 Jack Livingston JLIVINGS 011.44.1644.429264 23/04/1998 SA_REP 8400,00 0,20 149 80
181 Jean Fleaur JFLEAUR 650.507.9877 23/02/1998 SH_CLERK 3100,00 120 50
186 Julia Dellinger JDELLING 650.509.3876 24/06/1998 SH_CLERK 3400,00 121 50
189 Jennifer Dilly JDILLY 650.505.2876 13/08/1997 SH_CLERK 3600,00 122 50
200 Jennifer Whalen JWHALEN 515.123.4444 17/09/1987 AD_ASST 4400,00 101 10
16 rows selected
SQL> delete from v_employees where hire_date >= to_date('01/06/1998', 'dd/mm/yyyy');
2 rows deleted
SQL> regards, -
No selection with SIGN = 'I'; OPTION 'GE' allowed
Hello All,
I have added an ABAP routine in one of the InfoPackage to filter a field CREATDATE(char,8).
Whenever I am executing the InfoPackage I am getting the following error:-
For sel. field 'CREATDATE', no selection with SIGN = 'I'; OPTION 'GE' allowed
Message no. RSM1607
Through debugging I have noticed that after the EndForm of the InfoPackage filter the Program control goes to a System Program "RSS2_INTERPRET_SELOPTS_DS". All the Selection Options (EQ, BT, GE, GT, NE, LT, etc ) are defined in this program and the program control ignores the 'GE' option code specified in the program "RSS2_INTERPRET_SELOPTS_DS".
if not l_s_so-ge is initial.
clear l_s_selopts.
l_s_selopts-sign = 'I'.
l_s_selopts-option = 'GE'.
l_s_selopts-single = 'X'.
append l_s_selopts to e_t_selopts.
endif.
Can anyone help how to resolve this.
Thank You
Edited by: RACHANA_CG on Sep 27, 2010 2:28 PMHi,
I guess in Infopackage filter routine, you can only declare multiple single values or a range i.e technically I EQ & I BT.
Excluding or greater/less functions are disregarded. You can create a dynamic infopackage filter to have all the dates say for the next two years from the start date & run it.
--Akashdeep
Maybe you are looking for
-
How to add variables in SOAP header before to call my Physical Service?
In ODSI, I created a Physical Service for an external WebService (third part). In a logical Service (inside a XQuery Extension Function) i am calling the previous Physical Service. However, I need to add some variables in the SOAP Header Request befo
-
Where are my calendar entries from 2011?
I can no longer access any calendar entries from 2011. They are GONE. As a test, I made another entry in the December 2011 calendar, and within five seconds, it disappeared! Where are my entires for all of last year? How do I get them back? I do
-
Role of multiple network interfaces
Hi, I'm trying to setup a Mac Mini Server to act as a gateway and to offer various services from inside and outside of my office. For me this is some kind of test setup before I may look into getting a bigger machine for this job. Because a gateway n
-
Lens correction for the Canon Powershot G1x
When will Adobe offer lens correction for the Canon Powershot G1x in Lightroom?
-
[svn] 862: Update of AIR and Flash Player builds
Revision: 862 Author: [email protected] Date: 2008-03-19 11:31:19 -0700 (Wed, 19 Mar 2008) Log Message: Update of AIR and Flash Player builds AIR: 031708apms Player:r120 Modified Paths: flex/sdk/branches/3.0.x/frameworks/libs/player/playerglobal.swc