PP render files come unrendered after program closes

I've stumbled across some posts on this before. I'm working on a Mac Retina Pro. Every time I close PP and go back in my render files are gone. I'm forced to re-render everything. Is this still actually an on-going problem? I find it hard to believe that people are still living with this. Please tell me I'm wrong.

As far as I know, it is still an issue for some. I'm not aware of any known cause or solution, other than that listed below.
My workaround for 'lost' preview files in Premiere

Similar Messages

HD m2v render files come out speed up

Greetings. I've been recently working on an HD project in final cut. Everything was going fine until it came time to export. I'm working with 720p footage shot at 23.98 fps and edited in a 23.98 fps timeline.
When I export the video to an m2v file at standard definition, it exports just fine and my final video comes out at 24 fps like I need it. However, making no other adjustments, when you change the image size to 720p for an HD render, it comes out at 59.97 frames per second. I've tried using all the default settings in compressor, as well as switching the frame rate to automatic (even tried it at 59.97 fps to see what would happen) and obviously I've tried setting the frame rate to 23.98 fps.
Regular definition comes out fine everytime and 720p always comes out at 59.97 fps, regarldess of the frame rate settings. I'd like to figure out what's going on but bottom line is I need an HD m2v file of this film at 24 fps!
Something note worthy is that I can export to an H.264 HD .mov file with no issue; my client unfortunately needs a final HD render in m2v format.
Any help would be greatly appreciated! Thanks!
Power Mac G5 Mac OS X (10.4.2)

I'm having this same problem. 90 minute project, DVCPRO HD 1080.
I rendered it once, took all night, then was able to export to mpeg2 for a dvd pretty quick. Few days later I went to export to another file format, but the renders were gone- back to red!

Render file size bigger After Effects CC 2014

Hello, this seems like a silly question, but ever since the 'After Effects CC 2014' update my rendered files seem to be enormous in comparison to the files I rendered before the update!
I don't see why the update would have adjusted my render preferences, but it must have done as a 2min clip that rendered at 140mb before is now 10GB!!!
My knowledge of codecs and compression is limited but I had a good preset before the update which now seems to have changed (although I have always been rendering h.264/full quality/no audio so I don't understand how the file size can change so drastically).
Has anyone else experienced anything similar?
If not could you please advise me on how to render these files to a suitable size. Like I said they need to be h.264, 1920 x 1080 with no audio.
Thanks.

After Effects CC 2014 no longer supports the output of many delivery codecs, such as Mpeg4 and H264, through the Render Queue.
You can output far more formats, and in greater quality, using Adobe Media Encoder. You can send AE renders directly to AME from After Effects. You can import AE projects directly into AME. And you can also render high quality and/or lossless formats from the AE Render Queue and then re-encode them from AME.

Program closes when trying to select file

I have Elements 10 and use a Windows 7 machine. When scrolling to select a file to open the program closes. This occurs when I scroll down to RAW files. It happens before I actually select a file. The program does not freeze but just closes. Help welcomed.

Can you try resetting preferences?
To know how to rest preferences, check the following help document. Please note that for PSE9,only the first method would work
http://helpx.adobe.com/photoshop-elements/using/undo-redo-cancel-actions.html#restore_defa ult_preferences

Render Files Disappearing

Question, I'm creating a variety of short (1-3 minute) videos in FCP 7, primarily a combination of various Motion .motn files embedded in the sequences. The problem I'm having is the render files are disappearing after only a couple of days. This means I keep having to re-render the .fcp projects whenever I want to work with them. I have a dedicated Scratch disk with over 150GB free.
What is FCP's algorithim for deleting render files? Are there any settings I can configure to have FCP hold onto or not delete any render files for a certain time?
Thanks!
lance

Up to now I have been importing the Motion .motn files directly into FCP. But I'm beginning to think you have the right approach. Export Motion files into ProRes, then import that into FCP.
Another problem I'm running into is if I open .motn file, and don't even edit it but just then close it also, when I open FCP it complains about the .motn file being unlinked.
ProRes and not embedded .motn files may be the way to go ...
lance

MW64, cs6 bridge when I move or copy files the context menu does not retain recent folder destinations after I close the program

W64, cs6 bridge when I move or copy files the context menu does not retain recent folder destinations after I close the program. The context options that show are the ones from original install. The workspace I set up is also gone. I have every explorer box and cleaner checked to save recent. Had to disable nivedia desktop software because of weird display conflict. Have Dell pro support and they cannot fix. Any ideas to help me with this would be appreciated.

Self-solved! I work in column view in Finder so get there in a Finder window with folders and files appearing.
There really is no problem, just select an ITEM in the COLUMN before right-clicking!
The "old" context menu will appear. If you click in the white space in that column (or anywhere in a Finder window) and then place the cursor over a folder or file WITHOUT selecting it and right-click you will bring up the secondary context menu - Open, Copy, Duplicate, View Options and a greyed out Labels option. No "Move to Trash".

After Effects CS6 - render files huge!

Ok I am tying myself in knots here.
I have a 7 second text animation on a plain background in After Effects CS6 which I want to export so I can use it in Premiere Pro CS6 withan alpha channel so i can superimpose it over video. The file is 1080P 25 because that matches my video. the first time I rendered it it came out at 89Mb which was fine. But I wanted to tweak the text positioning so I did that - now every time I render the file is around 1.5Gb!
I am using Windows so i can't render Quicktime with an alpha channel which means I have to use avi but what settings should I use? (Avi is the only format which allows me to export RGB + alpha).
I have to say that I have used many video programs in my life but I find After Effects the single most unituitive piece of software I have ever encountered. Why can't it give you an indication of how big your render file is likely to be to gvie youa t least some clue as to what settings to use?

See this:
http://forums.adobe.com/thread/684381
Start here to learn After Effects:
http://adobe.ly/AE_basics
> I am using Windows so i can't render Quicktime with an alpha channel
That is not correct.
You can install QuickTime on Windows and use QuickTime for output from After Effects.

I am running windows 7 on a dell desktop. PDF files freeze shortly after opening or tryiong to print. Only the PDF freezes all other functions remain normal. I can close the PDF. I have an HP officejet pro 8600

I am running Windows 7 on a Dell desktop. PDF files freeze shortly after opening. No other programs freeze. I can close the PDF file. I am using a HP Officejet Pro 8600

Hi Duncan,
Please confirm if you Are using Acrobat.com online services or Acrobat software?
Regards,
Rahul

Render files missing after export using compressor

The deets:
Render file path is correct.
Render files live on an XSAN, shared by multiple users.
The FCP Sequence is fully rendered before output through compressor.
After compressor is done working, sequence becomes unrendered.
Any ideas?
Manually relinking is not a viable solution - we work with a buttload of media. Each program is 30 mins & takes enough time to render to make this a major issue.
Thanks in advance!
-Rich

I'm sure there's a reason for this to happen, which given the info provided I have not quite identified, however, to keep things going...
After full render of video and audio export as QT movie "reference" ( uncheck self-contained box before exporting) that will take a lot less to export and a LOT less space.

Very weird: uninstalled programs come back after reboot

I have turned off the system restore. I am sure the programs are uninstalled from the control panel, and the files in C:\Program Files\xxx are all gone. But these programs always comes back after a reboot, and resets all the file associations. I guess
it is a strategy the previous IT staff used to protect these programs. But the current IT staff have no clue what is happening here. It is so annoying.
Thank you very much for any input.

When you restart your PC, does it remove everything?
You might have two administrator in your account, try use log off and see what administrators do you have in your PC?

Program Files Adobe Adobe After Effects CC Plug-ins Video Copilotのホルダーがない.

Video Copilotのホルダーがない

adobe after effects cc >さん、はじめまして。
Video Copilot社のプラグインをインストールされるのでしょうか。
お書きになった階層ですが、一つ抜けてます。正しくは下記です。
C:\Program Files\Adobe\Adobe After Effects CC\Support Files\Plug-ins\VideoCopilot
※After Effects CC 2014ですと上記のCCのフォルダがCC 2014になります※
僕もVideo Copilot社のプラグインを使っているので画像を貼りますね。
http://www.flashbackj.com/video_copilot/faq/#install_ae_cc
なお上記ページでも手順2番でディレクトリを選択するとして、
Program Files > Adobe > Adobe After Effects CC > Plug-ins > Video Copilot
を選ぶと記載されておりますが、これは誤り（記載漏れ）だと思われます。
いかがでしょうか。ご不明な点があれば是非ご返信ください。

I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection. Any ideas?

I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection. Any ideas?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

In Imovie 2011-Trying to image capture my project but it comes up after 10 hours- The project could not be prepared for publishing because an error occurred. File already open with write permission. Hopefully someone can help me.

In Imovie 2011- Trying to image capture my project but it come up after 10 hours of rendering- The project could no be prepared for publishing because an error occured. File already open with write permission. Please Help!

oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

Iphoto fails to render files for export to certain folders after upgrade

I just upgraded to Yosemite and the latest version of iPhoto but I now unfortunately get an error message when I try to export photos. It seems to work if I export to the main Documents folder but fails if I try to export to a sub folder of the main Documents folder (very odd) which is where I want the exports to be saved. The error message says "Unable to render file for export:/Volumes/NO NAME/DCIM/IMG-1058.jpg". I don't know why the path name shown here is a SD Card path which is not connected. Hope someone can help? It worked fine before the upgrade to iPhoto 9.6.1
Thanks
Craig

The iPhoto preference file might be wonky. Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Pop-up blocker is turned on..pop-ups still come up...if they have sound it will continue even after i close window...how do i shut this off...don't have this prob with explorer

my pop-up blocker is turned on..pop-ups still come up..if they have sound it will continue after i close the window..explorer windows pop-up also but sound shuts off when window is closed
== This happened ==
Every time Firefox opened
== since i downloaded firefox

See [[Pop-up blocker]] for troubleshooting information on why pop-ups are not being blocked. A pop-up from Firefox will have the Firefox logo and it will say Mozilla Firefox on top (See [https://support.mozilla.com/en-US/kb/Pop-up+blocker?bl=n&s=pop%2520up%2520blocker#Is_the_pop_up_coming_from_Firefox_ Is the pop-up coming from Firefox?] for more information.) Attached is an example. If you determine the pop-ups are not coming from Firefox:
Your issue may be caused by Malware. You can run and update the following '''free''' antivirus software:
1. Malwarebytes (Free version) - http://www.malwarebytes.org
2. Spybot Search & Destroy - http://www.safer-networking.org
3.Spyware Terminator - http://www.spywareterminator.com
In addition, there are a number of forums you can use to help get rid of your infection. These include:
*[http://www.bleepingcomputer.com/forums/ Bleeping Computer]
*[http://forums.spybot.info/ Safer-Networking Forums]
*[http://www.spywarewarrior.com/index.php Spyware Warrior Forums]
*[http://www.spywarewarrior.com/index.php SpywareInfo Forums]

PP render files come unrendered after program closes

Similar Messages

Maybe you are looking for