PP/SD/CO/MM-power and steam

Dear All,
In my power plant, Steam and power is produced.
I want to map the scenario. But how can i saw power production and sell to different units. As power, we can not keep in stock as it is directly issued/consumed/sold. So are there any specific things are provided by SAP for power production and selling?
If you have any idea plesae share the same as I want to produce steam and power and want to sell the same to different plants within client or may be to supplied to govt in future.
FYI in my company, Descrete manufactuting is there. Version 4.6 C
In PP/SD/CO/MM side, what transactions may be followed to achieve this?(steam and power production and sell).
so how to map this scenario. pl. suggest.
Regards,
Vijay Modasiya

Hi, YOu can use REM to capture the production cost of the power and steam. Create as halb materials but make sure that the process is mapped in such a way that stock is consumed to full at the month end processing....
1) if we generate steam and power and stock it , how to clear it. : depend on your process, if the consumption for steam and power is booked at end of shift, just before that do a GR for the equivalent power and consume it....
3) What will be the implications on cost , if we stock steam and power. - you can do a standard cost estimate.

Similar Messages

Re : Power and steam

Dear all ,
         Here we have a scenario where we are generating LP Steam and Power in power plant and using it in other plant for paper making.
So we are considering LP Steam as finished product and Power as co product.Here we are generating LP steam and Power by using HP steam ,and HP steam is generated by using RO water.
So we are considering HP steam and RO water as semi finished products.
         And in paper plant , we are bringing LP steam and Power as activities , so
1) if we generate steam and power and stock it , how to clear it.
     Whether every day or once in a month.
2) If we consider Steam and power as activities in paper plant , how to go about it.
3) What will be the implications on cost , if we stock steam and power.
4) Do we need to move the stock to paper plant if we are considering steam and power as activities in paper plant.

Hi, YOu can use REM to capture the production cost of the power and steam. Create as halb materials but make sure that the process is mapped in such a way that stock is consumed to full at the month end processing....
1) if we generate steam and power and stock it , how to clear it. : depend on your process, if the consumption for steam and power is booked at end of shift, just before that do a GR for the equivalent power and consume it....
3) What will be the implications on cost , if we stock steam and power. - you can do a standard cost estimate.

TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
 Cheers, Tom

My ipod touch wont turn on!! i have tried EVERYTHING!!! rebooting , trying to put it in DFU mode , pressing volume , power and home buttons , charging it but nothing works!it doesn't show up in itunes. my warranty is expired. what to do please help!

MY ipod touch 5 wont turn on. i tried holding the power and home button together to reboot but didnt work. i tried pressing only the home or power button but no response . it doesn't show up in itunes. i tried keeping i in charge but it doent even show the charging icon! it does not show the no battery icon either. i tried leaving it with no disturbance for a few hours but still no luck . it has no response . My 1 year warranty is already expired. is my ipod officially and completely DEAD????

See if you missed anything here
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free. No warranty required
Apple Retail Store - Genius Bar

My ipod touch is stuck in white screan i tried the power and home buton but is not working

while i was restoring my ipod touch on itunes an icon popped out with a usb an itunes symbol i did the reset thing wih them power and home button and i just turned white. my ipod wont even shut off i also tried letting my ipod die and when i turned it back on it sill went white. I NEED HELP

Try the other suggestions for the white screen include here.
iPod touch: Hardware troubleshooting
However, you likely have a hardware problem.

Okay before my ipod power and volume buttons werent working but i never dropped it, then one day i was in a app and my ipod froze so i held the home button down and the screen went a bright green color and isnt showing up in itunes

okay I just recently bought a ipod touch 4thG and im already having issues. recently the power and volume buttons stopped working after i syncd my ipod, i shrugged it off figuring it would come back i could live without it. but today I was on my ipod while it was charging and the screen just froze so i pressed and held the home button (being that's the only button that actually works) then the screen turned this bright yellowish lime green color and its not responding to ANYTHING! my computer isnt even reading it when i plug it up into itunes! so what should i do? can anyone help me? i feel like i just wasted $200...

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

HT201263 When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong

When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?

- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge

I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge. PLZ HELP ME!!!!

- If in recovery mode the screen will have an iTunes logo with an USB plug.
- Have you tried connecting it to your computer for a n hw and then see if it appears in iTunes. If it does restore the iPod.
- If screen is blank, try placing he iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore

My ipod touch 4th gen will not turn on, i have held the power and home buttons, i have plugged my ipod into itunes and tried again, yet nothing happens, what should i do?

My ipod touch 4th gen will not turn on, i have held the power and home buttons, i have plugged my ipod into itunes and tried again, yet nothing happens, what should i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have an ipod 2 generation, but it wont charger or turn on. i try pressing the power and home button at the same time but it still wouldnt work. what else should i try to do?

One day I was going to download music from my laptop to my ipod, I was able to download all the songs I wanted but later when I try to charger my ipod it wouldn't let me. The next day I bought a new charger but it still didn't charger. I try pressing the power And home button at the same time but it still wouldn't turn on or charger.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iPhone ran out of power and now it won't be turned on

Yesterday I got a "message" on my iPhone display which I had never seen before. The power was so low that it just showed a falshing bettery icon and a symbol that showed that I needed to connect it to a power source. I didn't have time to do this before it ran all out of power.
As soon as I got home I connected it and it was connected to the power source all night. Now, however, when I try to turn it on, while it's still connected to a power source, it shows the Apple logo for about 10 secs, then the light is dimmed in the display, still revealing the Apple logo, and then it just turns off again.
I've tried holding the power and home button at the same time also, that didn't work either. When it's not connected to a power source nothing at all happens when pressing any buttons.
Can somebody please help me with this?
Thanks!

I hope you are able to solve your problem. The iPhone is definitely designed to be able to run the power all the way down. In fact, the instructions to maintain your battery suggest doing that once a month. I do it now and then, not usually once a month and I am always able to get my phone back to where it would be usable in about 10 minutes of charge. I always keep it in the charger until it is fully charged, however.
I just didn't want you to think you made some big mistake to let it run out of charge. There must be something going on with your phone or the battery.

My i phone 5 has frozen with an i tunes logo and slider. It won't do anything, power off does npothinmg and power and home button does nothing!!!!!

I connected my i phone 5 to the computer to download a photograph but the phoen has now frozen and a sloider bar but it won't respond. Even when using the power and home buttons it just comes back to the same frozen display.

Hello Uprevved
If it is not responding, check out the article below for some troubleshooting steps to get it resolved.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Regards,
-Norm G.

7 year, 100+ PC Veteran Stumped ! Power, and performance issues. Full detail included.

Good morning everyone! (At least it's morning in wonderful Pennsylvania USA!)
AMD Athlon 64 3200+ (New Castle)
Thermaltake Venus 12 CPU Cooler w/ Manual Adjust
MSI "K8T Neo-FIS2R" K8T800
512MB x 2 Corsair TWINX1024-3200C2PT (Rated 2-3-3-6 1T)
Antec TruePower 430w PS (+5V@36A +3.3V@28A +12V@20A)
Gainward Dual DVI w/ VIVO GeForce FX5700 Ultra
2x Viewsonic 19" VX900 LCD Monitors
Creative SoundBlaster Audigy Platinum eX
Plextor 712a Black 12x+/8x- DVD-RW
Lite-On SOHD-167T Black 16x DVD-ROM
Western Digital WD740GD 74GB 10,000rpm Raptor SATA
Western Digital WD2500JB 250GB 7,200rpm 8MB IDE
Seagate Barracuda ST3200822AS 200GB 7,200rpm 8MB IDE
Lian-Li PC-65B Black Aluminum Case
Vantech PCI Slot Fan
CyberPower 825va Voltage Regulating UPS
Windows XP Professional SP1a
There we have it, I think that that is all you need to know to perhaps give opinions and advice. Allow me to elaborate on why I am posting today after browsing this wonderful forum for the last two weeks. (...and by the way, my hat's off to some of you knowledgeable regulars for helping out a lot of newbies and folks in trouble!) Without further adieu:
Problem #1: POWER ISSUE
When, or if, I remove AC Power from my PC for whatever reason I run into a problem in which after reconnecting the AC Power and attempting to turn on the computer it goes into a 3-5 second startup loop in which the PC does not post, but rather cycles power to all of the components indefinitely. I notice the LEDs on my optical drives cycling repeatedly ad infinitum until I power off using the 4-second hold method, and then press the power button again. At this point the PC boots up fine, and boots up fine going forward from all restarts and shut downs. How strange? I've never, EVER, encountered something like this before.
Problem #2: PERFORMANCE ISSUE
This PC has a handful of serious performace issues.
3dMark03 scored horribly.
Prime95 runs ridiculously slow although there are no erros! It runs much more quickly on my work PC which is a PIII 866mhz with 384MB of PC133 RAM.
I receive, on no regular frequency, or while doing anything in particular, Explorer memory errors. Not BSOD's mind you, but "...blah blah blah referenced memory address xxxxx-xxxxx and could not be written". This causes Explorer to restart itself, blowing away the start menu, task bar, and any Explorer windows open. They reappear, of course, without incident.
The most off performance issue of all is that when opening an Explorer window for either of my IDE HDs, designated D and E drives, I find that when using the highlighting rectangle tool the Explorer window freezes or lags. I can double-click and open or move/copy files without incident, but if I attempt to highlight by this method this halt or lag occurs.
Also, since my update of the BIOS from 1.2 to 1.7, and then to 1.8 system startup times prior to Windows loading are HORRID. I have disabled just about everything, and yet the SATA BIOS loads for 5 seconds, and then I must wait 20 seconds for Windows itself to come to the login screen. No other BIOS related issues to report per se, but this is terrible for what should be a blazingly fast computer.
Now let's see.. what have I tried to do to repair the issues?
1) 2 BIOS flashes. First from 1.2->1.7, and then from 1.7->1.8. Ostensibly this was just "because". The power user need to have the latest! I noticed the incorrect CPU temperature being reported, however.. This led to me buying this massive ThermalTake HSF to replace my stocker. I also added more thermal goop than I ever have before, as well as a PCI slot fan before I became aware that it was a BIOS issue! GRRRR MSI.
2) I thought perhaps for the one issue that one of the hard drives was an issue, and even perhaps for power, but I replaced each with new drives and tested all 4 on another PC. NO problems. Also I should perhaps mention that my IDE drives are all hooked up using Antec Cobra cables. Expensive yes, but why the hell not, right? I've never seen a hang-off grounding wire for IDE before. Decided not to use them as I could think of a great place to screw them in, nor have other PC using them had trouble skipping the ground wire.
3) I unplugged every molex cable, the 4-pin CPU power, and the 20-pin ATX power and rerranged them all - as well as removed and then reinserted the RAM.
4) I tried changing my memory timings and power management settings, etc in BIOS. Nothing seem to impact the issue. I didn't fiddle with the voltages, but I should not need to running the RAM at SPD or lower settings and without overclocking the system at all!
5) Another issue that I had that seems to have vanished, come back, vanished, and then come back a "little bit" is my USB ports. When set to enable legacy devices in BIOS my USB items like my Logitech wireless keyboard would just cycle power and refuse to function. Also my UPS connected VIA USB seems to sometimes handshake with Windows and sometimes not. I've tried using all of the different ports, etc but the problem remains. I NEED 6 ports for my devices so it is all that I could do!
6) I have an Enermax 550w EG651P-VE(FMA) with 36 amps on each voltage rail on it's way, and it should arrive tomorrow. Despite all of the crap regarding power supplies that I see on this board I am not confident that it's the problem. That Antec PSU should be able to hold it's on with 20 amps on the +12v channel. C'mon now. I build a nearly identical system with the same power supply for a customer and he has no problems at all. He also has 3 HDs, same motherboard, etc.. the only difference is he has but one optical drive and a 2800+ rather than a 3200+. That power difference should be decimal nature in amps needed.
...oh and the sound card is in PCI slot 3, for those that remember the glory days of sound card IRQ issues that Creative was once notorious for... oh, and I disable the ethernet boot device, etc so my slow startups should not be related. My serial ATA drive is also on connection 1 of the VIA controller.. Promise can kiss my a**.
Soooo.. Show me what a n00b I am, oh great ones. I've built over 100 PCs since 1998 for myself, friends, families, and customers... and I've never seen an issue like this one! I'm no dummy, but please don't assume too much. Other pros on here know full well you can forget the most simple mundane detail in spite of experience! I want to solve this problem. I am on the verge of shelling out for a new motherboard and processor of the 939 pin variety.. and am now wary of MSI's long awaited socket 939 K8 Neo2 board despite it's awesome reviews. MSI has never really given me trouble before.. but I don't really want to spend money to the order of $200+ for that damned Gigabyte board. Gigabyte has always been good to me as well. Save my wallet! PLEASE!!!
Thanks so much everyone, I tried very hard not to leave out any details!
Az (Ian)
You can reach me on Yahoo or AIM just about any time, and I will check here frequently.

Quote
Originally posted by AzaghalSEI
Good morning everyone! (At least it's morning in wonderful Pennsylvania USA!)
AMD Athlon 64 3200+ (New Castle)
Thermaltake Venus 12 CPU Cooler w/ Manual Adjust
MSI "K8T Neo-FIS2R" K8T800
512MB x 2 Corsair TWINX1024-3200C2PT (Rated 2-3-3-6 1T)
Antec TruePower 430w PS (+5V@36A +3.3V@28A +12V@20A)
Gainward Dual DVI w/ VIVO GeForce FX5700 Ultra
2x Viewsonic 19" VX900 LCD Monitors
Creative SoundBlaster Audigy Platinum eX
Plextor 712a Black 12x+/8x- DVD-RW
Lite-On SOHD-167T Black 16x DVD-ROM
Western Digital WD740GD 74GB 10,000rpm Raptor SATA
Western Digital WD2500JB 250GB 7,200rpm 8MB IDE
Seagate Barracuda ST3200822AS 200GB 7,200rpm 8MB IDE
Lian-Li PC-65B Black Aluminum Case
Vantech PCI Slot Fan
CyberPower 825va Voltage Regulating UPS
Windows XP Professional SP1a
There we have it, I think that that is all you need to know to perhaps give opinions and advice. Allow me to elaborate on why I am posting today after browsing this wonderful forum for the last two weeks. (...and by the way, my hat's off to some of you knowledgeable regulars for helping out a lot of newbies and folks in trouble!) Without further adieu:
Problem #1: POWER ISSUE
When, or if, I remove AC Power from my PC for whatever reason I run into a problem in which after reconnecting the AC Power and attempting to turn on the computer it goes into a 3-5 second startup loop in which the PC does not post, but rather cycles power to all of the components indefinitely. I notice the LEDs on my optical drives cycling repeatedly ad infinitum until I power off using the 4-second hold method, and then press the power button again. At this point the PC boots up fine, and boots up fine going forward from all restarts and shut downs. How strange? I've never, EVER, encountered something like this before.
Problem #2: PERFORMANCE ISSUE
This PC has a handful of serious performace issues.
3dMark03 scored horribly.
Prime95 runs ridiculously slow although there are no erros! It runs much more quickly on my work PC which is a PIII 866mhz with 384MB of PC133 RAM.
I receive, on no regular frequency, or while doing anything in particular, Explorer memory errors. Not BSOD's mind you, but "...blah blah blah referenced memory address xxxxx-xxxxx and could not be written". This causes Explorer to restart itself, blowing away the start menu, task bar, and any Explorer windows open. They reappear, of course, without incident.
The most off performance issue of all is that when opening an Explorer window for either of my IDE HDs, designated D and E drives, I find that when using the highlighting rectangle tool the Explorer window freezes or lags. I can double-click and open or move/copy files without incident, but if I attempt to highlight by this method this halt or lag occurs.
Also, since my update of the BIOS from 1.2 to 1.7, and then to 1.8 system startup times prior to Windows loading are HORRID. I have disabled just about everything, and yet the SATA BIOS loads for 5 seconds, and then I must wait 20 seconds for Windows itself to come to the login screen. No other BIOS related issues to report per se, but this is terrible for what should be a blazingly fast computer.
Now let's see.. what have I tried to do to repair the issues?
1) 2 BIOS flashes. First from 1.2->1.7, and then from 1.7->1.8. Ostensibly this was just "because". The power user need to have the latest! I noticed the incorrect CPU temperature being reported, however.. This led to me buying this massive ThermalTake HSF to replace my stocker. I also added more thermal goop than I ever have before, as well as a PCI slot fan before I became aware that it was a BIOS issue! GRRRR MSI.
2) I thought perhaps for the one issue that one of the hard drives was an issue, and even perhaps for power, but I replaced each with new drives and tested all 4 on another PC. NO problems. Also I should perhaps mention that my IDE drives are all hooked up using Antec Cobra cables. Expensive yes, but why the hell not, right? I've never seen a hang-off grounding wire for IDE before. Decided not to use them as I could think of a great place to screw them in, nor have other PC using them had trouble skipping the ground wire.
3) I unplugged every molex cable, the 4-pin CPU power, and the 20-pin ATX power and rerranged them all - as well as removed and then reinserted the RAM.
4) I tried changing my memory timings and power management settings, etc in BIOS. Nothing seem to impact the issue. I didn't fiddle with the voltages, but I should not need to running the RAM at SPD or lower settings and without overclocking the system at all!
5) Another issue that I had that seems to have vanished, come back, vanished, and then come back a "little bit" is my USB ports. When set to enable legacy devices in BIOS my USB items like my Logitech wireless keyboard would just cycle power and refuse to function. Also my UPS connected VIA USB seems to sometimes handshake with Windows and sometimes not. I've tried using all of the different ports, etc but the problem remains. I NEED 6 ports for my devices so it is all that I could do!
6) I have an Enermax 550w EG651P-VE(FMA) with 36 amps on each voltage rail on it's way, and it should arrive tomorrow. Despite all of the crap regarding power supplies that I see on this board I am not confident that it's the problem. That Antec PSU should be able to hold it's on with 20 amps on the +12v channel. C'mon now. I build a nearly identical system with the same power supply for a customer and he has no problems at all. He also has 3 HDs, same motherboard, etc.. the only difference is he has but one optical drive and a 2800+ rather than a 3200+. That power difference should be decimal nature in amps needed.
...oh and the sound card is in PCI slot 3, for those that remember the glory days of sound card IRQ issues that Creative was once notorious for... oh, and I disable the ethernet boot device, etc so my slow startups should not be related. My serial ATA drive is also on connection 1 of the VIA controller.. Promise can kiss my a**.
Soooo.. Show me what a n00b I am, oh great ones. I've built over 100 PCs since 1998 for myself, friends, families, and customers... and I've never seen an issue like this one! I'm no dummy, but please don't assume too much. Other pros on here know full well you can forget the most simple mundane detail in spite of experience! I want to solve this problem. I am on the verge of shelling out for a new motherboard and processor of the 939 pin variety.. and am now wary of MSI's long awaited socket 939 K8 Neo2 board despite it's awesome reviews. MSI has never really given me trouble before.. but I don't really want to spend money to the order of $200+ for that damned Gigabyte board. Gigabyte has always been good to me as well. Save my wallet! PLEASE!!!
Thanks so much everyone, I tried very hard not to leave out any details!
Az (Ian)
You can reach me on Yahoo or AIM just about any time, and I will check here frequently.
The startup problem might just be a screwy psu. Your antec *should* be able to power your stuff just fine, but maybe it is defective in some strange way.
What is your 3dmark03 score? If it is 3000-4000, (approx perf. level of ati 9600xt), then it is fine.
Check your memory using memtest86+, and try underclocking it to ddr333.
UNplug usb devices, and see if it speeds up boot. Also, I would not recommend bios 1.8 since people seem to have some troubles with it.
Also, try disabling agp fast writes, disabling spread spectrum, and maybe boosting ram voltage a tiny bit.
Try booting without your audigy plugged in, and try booting barebones (nothing but 1 hard drive with os) and see what happens.
I'm no expert, but you might get lucky trying these steps.

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

Help. We lost power and everything on computer. I have recovered itunes and 483 purchased songs But have 1895 on my iphone. How can I get them back to my computer itunes library?

Help We lost power and everything on the computer. I have recovered itunes and the 483 purchased songs But I have 1895 songs on my iphone. How can I get my iphone library back on my computer library?

I have no need for it so cannot recommend directly but here are some programs
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
iRepo Mac and Windows
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPodCopy Mac and Windows

PP/SD/CO/MM-power and steam

Similar Messages

Maybe you are looking for