PP to AE Dynamic link doesn't create video layer in AE

PP to AE Dynamic link doesn't create video layer in AE. CC2014 updated.
I'm DynLink sending a MotionJpeg clip from PP to AE. On my MacPro, Right clicking clip in PPro> replace with AE Comp. AE opens showing the comp but no video layer in the comp, (the comp is completely blank), and in PPro shows a comp in the Project Panel and a blank video chip in the timeline. This used to be a simple proceedure, is there a setting to enable in Project Settings I don't know about. New to CC, used to do this all the time in CS6.

It looks like you've got collapse transformations turned on and that the Footage layer is a composition. I'd guess that the Maria Isabel.avi in the Maria Isabel.avi composition is 2D. With Collapse transformations turned on what you are seeing is normal behavior.
What you want to do is to simply right click on the Maria avi in the Premiere timeline and select Replace with After Effects Composition. Once inside AE don't pre-compose the avi layer, just make it 3D.
The other option would be to open up the Maria Isabel.avi composition and do your 3D transformations there.
Yet another option wold be to turn off Collapse transformations.
I'm not sure why the Maria Isabel.avi footage was Pre-comped. I can't see anytning in the screenshot that gives me a reason.

Similar Messages

Dynamic Linking Doesn't Renew

I use AME exstensively, normally no issues (lot's of FLash, MPEGs, WMV from various sources).
There is one little thing that seems to crop up when I'm using a dynamic link from AE or PrP.
Once a sequence of comp is linked and I make a change in the original file and then go back to AME the old file content is cached abnd doesn't change. I can remove the file from the queue and replace it but the old content is still there.
If I shut down AME and then reload the link again in the new istance, the new file content is there.
AM I missing something here? Or is there a caching bug bitting me.
Michael Cox
Burro Creek Pictures

Jim:
Thanks for the thoughts. I understand your answer and we're missing the mark here. Let me explain:
Step one: Load a sequence or comp in a dynamic link.
Step two: Discover an error. Stop rendering (Let's say a misspelled title).
Step Three: Go back to AE or PrP and make correction.
Step Four: Go back to AME and reload , not duplicate, the repaired file. However the repaired file is not what reloads. You will get the same earlier version that need the fix. So,
Step Five: Close AME, reopen and load the file in question again. This will show the fresh file and rending can begin again.
I understand reloading the repaired file, but I shouldn't have to shut down AME to reload a dynamically linked file.
If I am in AE or Premiere or even Encore, and I change an outside file such as a PSD or other file, the version loads on refresh (or sooner) as it should be.
I'm running a 64 bit platform here with Cuda graphics, and plenty of memory on a machine that only has Creative suite installed, nothing else.
Back to you
Mike

Adobe Dynamic Link doesn't work !

I'm using Adobe Encore DVD 2 and After Effect 7 . My problem is i can not use the Adobe Dynamic Link . It's always invisible , and i can not use it to import After Effect Composition to my DVD project or Create New After Effect Composition . Please show me how to make it possible to be used . Do i need to do something more !

Answered

Pr CC Dynamic linked media is creating blank compositions on AE CC

I'm sending individual Jpegs from a PR CC Timeline - Selecting each clip and going to File> Adobe Dynamic Link > Create new AE Composition - AE CC opens and creates the composition, but it has no clips/Jpegs on it ( i tried with a prores.mov file and the result was the same) Please Help - I have updated and restared the machine (Apple mac pro)

When I drag a sequence that is a lot less complex to AE CC from PR CC, It works ok. So I guess the complexity of the sequence matters or some things like keyframes or transitions just don't link.

Dynamic Link doesn't know I have Production Premium in Premiere Pro 5.5

I am having an unusual problem with my new Production Premium suite.
I previously had After Effects CS5 and the month-to-month Premiere Pro CS5.5. When I tried to use Adobe Dynamic Link to bring After Effects compositions into Premiere Pro, I'd get a message saying that feature is only possible with the Production Premium and Master Collection suites.
I have since purchased the Production Premium suite. I have uninstalled the earlier instance of Premiere Pro, leaving only the Production Premium one.
If I wanted to import Premiere Pro sequences into After Effects with the Dynamic Link menu, it will let me. I don't, though -- I want to import my After Effects compositions into Premiere Pro. However when I try to do that, I get the same error message I used to about how I need one of those two suites, even though I am now using one of them.
Anyone have this problem or know a fix?
Thanks.
R

You were close, though Cleaner only (albeit very completely) uninstalls Adobe suites.
The problem turned out to be that I had a standalone copy of After Effects previously installed. There was no way to get CS5.5 to understand that I ALSO had Production Premium. I uninstalled the standalone copy and it's worked since.
Thanks.
R.

Dynamic Link doesn't bring dissolves across to AE

Since I can't render out of Premiere (and i've done everything suggested to remedy the problem... uninstall, reinstall, clean script, spin around three times in my chair while drinking green tea... EVERYTHING.), i've resorted to bringing the project into AE and rendering out from there.
Problem now is, whether i dynamic link to the project or if i just import the Premiere project, all my simple transitions (dissolves!) don't come across. Example, I have a color matte (white) fading up over a clip dissolving to another clip, but it comes into AE as a hard cut. And this is true for ALL my transitions. Whether they are on their own fading in and out over video, or dissolving between 2 clips on the same video track.
I don't want to say that Premiere CS4 is garbage, but its garbage! If it wasn't going to work, it'd be best if it just didn't let you import anything. Then at least you couldn't start your project. Instead we do everything like we have been trained to do with adobe products and we get screwed in the end. It'd be like buying a car, that opens, starts when you turn the key, goes when you press the gas... just won't stop when you slam on the brakes. Sort of like that...
Any help or insight would be great!
Thanks.
I'm on a mac, 10.5 (leopard)

>Problem now is, whether i dynamic link to the project or if i just import the Premiere project, all my simple transitions (dissolves!) don't come across. Example, I have a color matte (white) fading up over a clip dissolving to another clip, but it comes into AE as a hard cut. And this is true for ALL my transitions. Whether they are on their own fading in and out over video, or dissolving between 2 clips on the same video track.
This is what I have tried to tell other people that this method does not always work...it might not even work for the easiest of projects. As you are seeing.
I take it you updated all your versions to 4.0.1.
Did you update all your hardware drivers?

Encore locks up when using the Adobe Dynamic Link to import Bluray video.

When I try to import video into Encore by using either the Adobe Dynamic Link or by opening Encore and importing as a timeline, Encore locks up during the "Prepare Transcode Settings" . I have Adobe Master Suite CS5 which was a download version. I've had this software since May 2011. I have been able to use import video in the past, but there seems to be an issue with Encore now. Has the program been corrupted? If I need to download Encore to repair it, how do I do this?
Thanks
Joe Miller

Some other things to read...
Reset Corrupted Preferences = Press/HOLD Ctrl+Alt+Shift while starting program
As well as the below, right click the Encore icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems... To create a two layer DVD (or a BluRay?), you MUST have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/771202
Odd Errors http://forums.adobe.com/thread/670174
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558
And This Message Thread http://forums.adobe.com/thread/665641

Is anyone else having serious issues with Dynamically linked clip render times in CC 2014.2

Short clips stalling and taking forever to render. Longer ones taking several hours???
I've noticed arbitrary little fixes, such as re-opening the after effects window, then going back into the premiere window causes the render to instantly speed back up in some cases.
A restart of the program I believe solves the issue too. As does simply rendering the clip out in after effects.
The problem is that I have long, overnight renders set up that need to run automatically. In this case, 9 clips, all about 30 minutes long. And pretty much all one long dynamically linked comp (I created a picture in picture effect in after effects compiling 2 30-minute video feeds, and then added some color correction). When I left at night, the total time kept creeping up and up to about 2.5 hours for one video. Even THAT sounds like a lot to me, but I let it go. I return to the computer 13 hours later, to see only 3 videos completed, and the one CURRENTLY in the queue saying over 6 hours remaining. I cancel the render.
I feel like there is some breakdown of communication between afx and premeiere happening here.
Anyone have any experience with issues like this?
Running PP CC2014.2 on a tricked out 2011 Macbook pro 17" OSX Yosemite

I'm on windows 7, and similar dynamic issues were a result of having two versions of the same app on the machine, and not associating the files to use the latest version, etc, or a version mismatch.
Another workaround is to close PPro and import the project into AME, rendering it from there.

Dynamic Link not working AT ALL (CS5.5)

I've been trying to queue a sequence from Premiere Pro to Media Encoder (both CS5.5), and it says that Dynamic Link isn't working. I tried to make a new After Effects composition with my sequence through Dynamic Link, and it says that I don't have it installed (I do and can sucessfully open it). So, Dynamic Link doesn't work at all. Working on a Mac here. Help?

It's possible that something (e.g., antivirus software) is blocking the communication that Dynamic Link relies on.
See this for solutions to a closely related problem:
http://helpx.adobe.com/x-productkb/multi/startup-screen-hangs-premiere-after.html

Dynamic Link After Effects to Premiere (Video Only, No Audio)?

Can you Dynamic link an After Effects file so that audio does not interleave into the premiere pro project? I just want to link the video part of the comp and do not want audio data in my asset.
*I already know that I can double click the asset in premiere and drag video only from there. I want to strip audio from the after effects linked asset so when i drag the asset from the bin to the timeline it will not try to add audio also.
Thanks,
Cliff

If you unlink the audio and video in Premiere Pro
Then you select only the video layer to replace with After Effects Composition
You'll end up with the Audio automatically turned off in AE when the dynamic link composition is created.
You get the same result if you leave the audio layer linked but you lock it before enabling the dynamic link.
The advantage to doing this is that you don't have to mess with audio in After Effects. There is no additional disadvantage to locking or unlinking the audio track because any time you replace elements in PPro with AE compositions the Audio and Video are unlinked. You'll need to re-link them if you plan move the tracks around at all because you loose the out of sync warnings that you'll normally get.

How to create a dynamic link in a Form to link to a specific FOLDER

Hello,
I have created a reports of all employees of my department.
This reports shows me the empno and ename
When I clicked on a empno ( for example empno = 1 ) then then I got a MASTER DETAIL FORM about that employee(empno = 1) .
Who he or she is and which course he or she had followed.
I want create a dynamic link in the MASTER DETAIL FORM which shows me directly the folder of that employee ( in this example folder 1 ).
If I clickt on the report with all employees of my department on an other number ( for example empno = 3333333) then if I click on the dynamic link in the MASTER DETAIL FORM I want to see the folder of employee 3333333 !!! You know what I mean ?
What I want to know is, how to create a dynamic link that shows me directly a folder which is dependent on which empno I had clicked on in the report ( report with employee numbers and ename )
Is there any way to pass some parameters into a link to a Folder ? Is this possible in Portal ? Does anyone know how to do this, or do you have a suggestion how to solve this problem ?
Thanks a lot !!!
Chu Lam

Hi Chetan,
I am glad that someone had replied on my question.
I will explain it to you again.
I have created a report that shows me all employees. If I click on a employee number then I get an MASTER DETAIL FORM on my screen with all the information(where he works now and which number I have to dial ifhow can I reach him by telephone) of that employee on which number I clicked on.
I really like this mechanism. (You click on a number and the information that you see in the next screen is dependent of the number you clicked on ! )I have created all this. It works fine.
What I want is to expand this example.
Every employee has a FOLDER (yes, those ones in Content Area ) which they can insert text or image into that folder. The folder name is just the employee number. ( employee with employee number 3303, he owns a folder which is named 3303 and an employee with empno 9999, he or she owns a folder with the name 9999. )
Every employee can tell more about himself in that FOLDER by iserting text and images. For example : What he likes, pictures of his vacation, something like this.
What I want is this :
If I click on the first report,which provides me all employees on screen, on a employee number 3303 then I get a Master Detail Form on my screen with all information about that employee with employee number 3303. And I want in this MASTER DETAIL FORM to create a link that shows me directly the FOLDER of that employee ( 3303), so I can learn more about employee with employee number 3303. But I don't know how to create this link.
That link had to be dependent on the employee number. The difficult thing about this link is that this link had to be dynamic.
I hope this will make it clear to you :
(report all employees:)
empno ename
3301 john smith
3302 peter clark
3303 wilson jones
If I click on a empno ( for example 3303) then I get a MASTER DETAIL FORM which provides me information.
(MASTER DETAIL FORM )
EMPNO 3303
ENAME wilson jones
department New York
mobile number 98908763
Company tel. no day
AOL 097485838 monday till wednesday
Oracle 04848584333 thursday and friday
LINK
(what I want is to create a link here )
If I click on LINK in this MASTER DETAIL FORM then I want to link to the FOLDER of this employee ! ( In this example it is FOLDER 3303.
BUT IF I CLICKED ON THE FIRST REPORT ON A DIFFERENT NUMBER ( FOR EXAMPLE 3301) THEN IF I CLICK ON LINK IN THE MASTER DETAIL FORM THEN I HAVE TO LINKED TO FOLDER 3301.
I just want to know how to make a link like this ( create a dynamic link to a specific folder ).
Thanks in Advance.
Chu

I'm getting a "The procedure entrypoint ssSr192x__ssSr192drvssSrReset could no be located in the dynamic link library ssSR192x.dll" because the ActiveX instrument driver DLL doesn't have the function names in the export table.

Is there a way for my CVI project to reference the functions in the ActiveX without including the instrument .fp in the project?
Thanks much.
I'm confused on how CVI uses ActiveX components and hope someone can help.
I'm using an ActiveX driver from an instrument manufacturer and I use the .TLB to generate a .fp, .c, and .h file. If I register the .dll and load the .fp in my project, all is well. Unfortunately in my application the functions to control this instrument are in another DLL whose .lib I include in my CVI projec
t. Running the CVI project this way gives me "The procedure entrypoint ssSr192x__ssSr192drvssSrReset could no be located in the dynamic link library ssSR192x.dll" because the instrument function names aren't in the export table in the instrument DLL. Non-ActiveX DLLs have the export tables so everything works for them.
Program structure with non-ActiveX DLLs:
CVI project (.exe with common.lib in project list)
|
V
Common DLL (MeasDMM() with hp1234.lib in project list)
|
V
Instrument DLL (hp1234_measure())
Since I get a .c and .h file from the .TLB, I've tried recompiling the DLL (.dll and .lib produced) and the functions seem to work, but I get "Class not registered" errors unless I play games with the registry so I'm obviously violating numerous Microsoft rules!
Is there a way for my CVI project to reference the functions in the ActiveX without including the instrument .fp in the project? Thanks much.
Jeff Fish
Advisory Test Engineer
StorageTek

Hello Jeff,
Where were your getting the .lib file for the ActiveX DLL? Did you use the "hp1234"
ActiveX driver generated by the "Create ActiveX Automation Controller" CVI Tool to build a static library? If you open an include file and choose Options >> Generate DLL..., it will generate source code or a static import library to load the specified DLL and load functions specified in the include file (this only works if the functions are exported from a DLL). However, in the case of our ActiveX Automation Controllers, ActiveX calls are used to access a DLL. This means that you do not need an import library. You should be able to open the "hp1234" source file and click Options >> Create Object File. Simply #include "hp1234.h" and add "hp1234.obj" to your Common DLL project;
the .fp file is not necessary. If this does not answer your questions or if you experience further difficulty, please post further details on what you are doing and the errors that are being encountered ("play games with the registry" and "recompiling 'the' DLL" are a bit vague in this case).
Jeremiah
Applications Engineer
National Instruments
http://www.ni.com/ask

Dynamic link between Premiere CC and After Effects CS6 doesn't seem to be working :(

I'm editing with RED r3d files. I have just updated to CC but it doesn't want to dynamic link with After Effects CS6

Hello,
Sorry but Dynamic Link only works between the same version of the products.
Best,
Peter Garaway
Adobe
Premiere Pro

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll.

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll. and one just said *Itunes was not installed correctly. Please re install I Tunes Error 7 (windows error 127) . I've tried uninstalling and reinstalling it. But either way cant work. I really need some of your help! PLS HELP ME!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The error shares a similar pattern to that in the third box, so a similar approach should work. Look for CoreFoundation.dll in C:\Program Files (x86)\Common Files\Apple\Apple Application Support, delete it, then repair Apple Application Support.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

PP to AE Dynamic link doesn't create video layer in AE

Similar Messages

Maybe you are looking for